Vintage chronographs have always had a market, the nostalgic look, feel, and sound of a mechanical stopwatch can’t be duplicated. The 1970s were the heyday for mechanical watches. The 1980s ushered in a flood of inexpensive electronic battery powered that almost put the Swiss watchmaking industry out of business.
Heuer were at the top of their creative game in the 60s and 70s with the iconic Carrera, Autavia, and Monaco watches. Heuer kept the funky shaped case theme going with the introduction of the Daytona around 1976. This rare model was only made for around 5 years. This is the first one to ever show up in our estate collection. The blue vignette dial on our example is perfect.
There isn’t a stain or scuff anywhere to be seen (even under magnification). The lighter blue centre section grows gradually darker toward the edges, culminating in a navy blue tachymeter scale on the sloped chapter ring. Powering the Daytona is the Heuer left hand crown, 17 jewel calibre 12. This is a significant mechanism in the world of horology and was an updated version of the famous calibre 11. The calibre 11 debuted in early 1969 with the goal of being the world’s first automatic winding watch with a chronograph. The calibre 12 addressed a few of the shortcomings points of the 11. Some parts were strengthened while a few others were made a little more compliant, resulting in added durability and reliability.
The frequency of the improved calibre 12 was increased to 21,600 for better accuracy. The Daytona was one of the last models to use the calibre 12, it was retired in 1980 along with the Daytona. The name is a tribute the to famous Florida racetrack and specifically the 24-hour endurance race that is still happens every year at the end of January. A relatively common, nice quality Rolex Daytona from the mid to late 1970s is going run you close to $100,000 these days. This much rarer Heuer Daytona is only around 1/20th of the Rolex cost. A Heuer Daytona also has the extra convenience of automatic winding, plus a handy 31 calendar adds further utility.
This example is in remarkable condition. As mentioned, the dial is perfect, with tritium hour markers and hands showing even tan patina. The luminous tritium no longer glows and shows only minor separation on the minute hand. When we opened the watch for inspection we were surprised to see just one record of service.
At close to 50 years old we would expect to see 3 or 4 additional service etching inside the threaded case back. This would suggest the watch hasn’t been worn very much or has sat idle for decades. That explains the excellent overall condition. The bracelet shows little wear or stretch, still displaying sharp crisp bevelled edges.
The original fluted pushers and knurled crown are fully functional with good action.
Even the original horizontally signed Heuer buckle is here and snaps tightly shut with a reassuring click.
Over the years with continuous wear the factory engraved style/serial numbers often completely disappear, not so with this one, the machined etchings numbers are still clearly visible on the edge of the case back.
Overall, this is a very good example of a rare and underappreciated Heuer. We a happy to offer the next owner a complimentary 1-year warranty. This retro classic is estate priced at $5,500.00 CAD. 520-00166.
Earrings are a clean slate when it comes to jewellery design and personal expression. This pair of hollow twisting drops are what happens when you cross a large hoop earring with a tornado. The corkscrew drops measure close to 2 inches from top to bottom.
They are attached to 7.7mm button discs by connecting rings that allow the double helix spirals to swing freely with the slightest movement. They are in perfect condition showing no dents, dings, or scratches of any kind.
Secured with snug fitting butterfly backs on standard 0.8mm wire posts. Constructed from 2.5mm wide hollow tubing of heavy gauge contributing to a significant total weight of over 4.4 grams. These wonderful earrings are sure to get noticed and invite many compliments. Estate priced at $770.00 CAD. Stock #426-00354.
If you only collected Omega Speedmasters you’d have an amazing variety of some pretty cool timepieces. This is a notable, important watch that is seldom encountered and absolutely not appreciated as it should be. Back in 1973 Omega celebrated their 125th year of operation and selected the Speedmaster to commemorate this achievement. The July 1969 moon landing was still fresh in people’s minds, everyone had space fever.
This watch captures the spirit and style of that moment in time. It’s a thick slice of early 1970s nostalgia. This wasn’t a slightly modified version of an existing model that Omega slapped a limited edition number on. Model 378.0801 completely unique.
Its massive steel case (42mm x 52mm) was used only for this model, there is no other Omega that shares the same case, bracelet or chronometer grade calibre 1041 movement.
This was a very expensive watch, when it was launched in 1975 it retailed at $425.00 USD. This figure was close to twice that of what a regular hand wind Professional Moonwatch sold for. It is rumored that Omega only produced just 2000 of these but that figure isn’t officially supported by Omega. Not only is it significant for being a rare anniversary model; it’s the world’s first automatic chronograph that is also a certified chronometer. While we’re at it, it’s worth mentioning this complicated watch is equipped with a useful calendar display along with a 24 dial located within the constant seconds display at 9:00.
There wouldn’t be another automatic chronometer grade Speedmaster in Omega’s lineup for several decades. This example came to us from an avid watch collector customer who focuses on high quality original examples. It is running great with all functions operating as designed and it’s keeping good time. Overall condition is very good, showing minor scuffs and scratches on the case and bracelet. The crystal is almost perfect, showing just microscopic scratches, impossible to photograph. The exposed raised edge on the crystal is 100%, not even the slightest impact mark. The original bracelet (1221/212) shows no stretch and almost zero sag.
It may be missing an adjustment link but should still accommodate a wrist size of nicely over 8 inches. This watch is a bit of a commitment to wear. Although there are larger watches available, few match the thick bulky feeling of the Speedmaster 125.
After learning a little bit about this watch I’ve come to admire it even more. We’ve only encountered this model twice before as an estate item. From what I’ve learned only the earliest examples have an engraved letter/number combination on the case back.
The exact meaning of this code remains a mystery but it only appears to show up on early examples. The serial number on ours is the lowest I’ve ever seen 35,075,576.
Under the practically flawless crystal is an beautiful flat black dial showing even parchment patina tritium dial markers.
The hands are showing some paint loss and uneven tritium patina. Wearing this watch everyday requires a strong arm as it weighs a substantial 198.6 grams and the case is a 1.5cm thick rectangular chunk.
Forget about wearing it under a long sleeve shirt. It’s a great conversation piece and a watch you’re not likely to encounter on any other wrist. We are happy to provide the next owner with a complimentary 1-year warranty. This important watch is estate priced at $5,000.00 CAD. Stock #510-00220.

Our estate collection offers jewellery items that you’d never see at most jewellery stores. Unique items with truly remarkable value are what the estate selection at Bill Le Boeuf Jewellers is all about. This dramatic pearl necklace would cost a small fortune if you were to try to duplicate it today. Just consider the components; seven strands of high quality Japanese Akoya cultured pearls showing few blemishes with a thick coating of fine grain nacre.
Each strand containing around 121 individual pearls measuring 3.7 to 4.0mm diameter per strand. Even the process of drilling over 800 tiny pearls seems like a daunting task. It’s hard to decide whether the pearls or the clasp is the focal point of this necklace. The hand carved lapis lazuli and 14 karat yellow gold clasp can be worn as the highlight or hidden at the back of your neck.
The fluted barrel shaped lapis clasp measures 1 inch in length and is set with 18 round brilliant cut diamonds measuring approximately 1.2mm diameter of SI-HI quality (0.125ct.tw.). The easy to use plunger style clasp is secured with a fold over side safety.
At 17.5 inches in length the necklace should fit most women.
It can be worn as a twisted rope style or inline design with the clasp at the front to be seen or hidden at the back. The cold to the touch feel of cultured pears combined with a finished weight of 66.5 grams make for a wonderful experience when worn. The estate price of only $2,500.00 is far below the wholesale replacement cost for this spectacular pearl necklace. Stock #231-00406.
Building on the popularity of Tudor’s Heritage Black Bay series comes the Black Bay Bronze. It made its debut is 2016 and was a huge hit. We’ve had many stainless steel Black Bay models over the years but only a few Bronze examples have shown up in our estate department and this is a good one.
Originally delivered to a Canadian authorized agent in March 2019 and still in perfect condition, looking unworn, except for some natural oxidation. There are no dings or scratches anywhere on the case, bezel, or on the lab-grown sapphire domed crystal.
The OEM distressed brown leather strap is in lightly worn condition as is the original golden brown NATO strap and buckle. The olive green rubber strap is from aftermarket manufacturer Rubber B and pairs beautifully with the oxidized bronze case and brown dial.
Rubber B offer high quality strap options for many luxury watches that fit perfectly and often use the original buckles, giving your watch a unique look appearing like it came from the factory that way. The green Rubber B strap can be seen on their website with a retail price of $240.00.
The watch is powered by Tudor’s in house developed MT5601 chronometer rated movement with close to 3 days of power reserve. The soft hue of the bronze case is like nothing else on the market; leave it to Tudor to try something as bold as this. The matte brown with rose-gold tone hands, markers, and text gives the watch a look unlike anything else in your collection.
A retro looking burnt orange sixty minute one way timer bezel is a necessity for any diver watch. It turns easily and indexes 60 times per full rotation with a satisfying audible ratcheting clicks. In the dark or low light situations the luminous hands and hour markers glow effectively.
Extra straps, inner/outer boxes, endorsed warranty card, and the original bill hang tag showing the original price in 2019 of $4,320.00 CAD. Like new condition and comes with our no charge 1-year warranty. Bronze Tudors are scarce and the brown dial 43mm is no longer being produced. A similar slate dial version (M79250BA) on black leather strap is the closest current offering from Tudor with a $6,060.00 retail price. We don’t expect this one will last too long at the estate price of $3,780.00 CAD. Stock #505-00612.
SOLD
We almost never see platinum in bullion form, and even in jewellery platinum it is scarce. Just how rare this precious metal is can be debated but it is thought to be around 20-30 times more rare than gold, at least in terms of actual platinum that has been mined and recovered. All the platinum mined throughout history would only make cube of only around 23 feet per side. From our own experience we can confidently say at least 100 ounces of gold compared to every ounce of platinum that comes through our estate department. Ten years after Canada introduced the world’s first 999 pure gold coin, the Royal Canadian Mint introduced its 9995 one ounce platinum coin in 1988. Canadian platinum coins are far more rare compared to the gold versions, these coins are minted in numbers lower than 20,000 per year compared to over 1,000,000 for the gold coins in high production years. No platinum coins were produced at all from 2000 to 2008. Platinum is far more rare than gold and silver, it’s also more dense. Compared to a 1 ounce pure silver coin the 1 ounce platinum coin occupies far less space.
Historically speaking platinum has been much more expensive than gold (sometimes double the price). For the last few years platinum has been trading for a big discount relative to gold. This coin is a true rarity for us, one we’re not likely to encounter again for some time. We recycle hundreds of ounces of silver and gold every year adding far more precious metal back into the system than we use in finished jewellery. In more than 7 decades of precious metal recycling we’ve only refined our scrap platinum bits and pieces twice. Only twice in over 70 years have we had enough of this rare grey/white metal to refine. We have many clients who like to purchase gold and silver bullion, but for the real precious metal connoisseur there is nothing like platinum. First come first serve for this one. Priced at spot platinum price plus 5% and no sales tax. For an up to the minute price of platinum click here. Please add 2% service fee for credit card purchases. Stock #912-00810.
SOLD
They don’t come more competent than a modern Breitling diver watch. All the high end diver features are here in a slightly dressier package. Lab-grown sapphire crystal with anti-reflective coating, threaded crown with guards, one way 60 minute ratcheting bezel timer, watertight to 1,000 feet, fold over clasp with safety lock, and a high accuracy automatic winding movement.
The watch measures 41mm diameter; the same size as a modern a Rolex Submariner. Large but not so big that it can’t be comfortably worn by most men. Its beautiful black slate dial is a miniature work of art. Flat finish paint with an inner parallel grooved square are the first things you notice.
Upon further inspection you see the large date aperture with beveled edges pin striped with a white/black frame.
Highly polished applied logo, silver hour markers with mitered edges mirror the inner square pattern and are tipped with luminous material for easy viewing in the dark.
Perfect white and red Arabic text let you know this is an automatic Breitling officially certified chronometer.
As with many Breitling models the entire watch has been treated to a highly polished finish adding to its dressier more luxury focused personality. The 21 jewel Breitling calibre 49 (modified ETA 2896) is working well and keeping great time. The large dual disc calendar offers some extra utility with better legibility for mature eyes. Excellent overall condition showing only minor evidence of use, the bracelet shows no stretch, sag, or worn edges.
We believe the watch has never been polished or refinished before. It you’d like the minor scuffs and scratches removed, one of our talented goldsmiths can remove the minor blemishes for you in only a few minutes. The watch is missing two of the adjustable links; if you have a larger wrist we may need to order a link or two for you.
Bill Le Boeuf Jewellers is pleased to include a one year warranty for the estate price of $3,200.00 CAD. Stock number 515-00111.
They say “dollar cost averaging” is the best way to invest for the long term. Doing such avoids buying at the highs and lows, avoiding the volatility makes sure you’ve never paid too much. Silver is taking a pause from some serious appreciation in 2025. It was over $76.00 in the middle of October and is now trading closer to $70.00 CAD (Nov. 10th, 2025). Getting a couple of ounces of one of the world’s most recognized bullion coins isn’t a huge financial commitment but it’s a great way to get into bullion investing or adding a bit more to your stack. Fine silver like this is sales tax exempt. To see the current price of silver in Canadian dollars click here. These two coins are being sold for the actual silver value they contain plus 10% for NON credit card purchases, add 2% in you want to pay by VISA or MasterCard. We are not bullion dealers and don’t always have precious metal for sale, especially in Royal Canadian Mint products and smaller amounts. These make great little gifts that never go out of style. They are being sold together only as a pair. Stock #912-00817.
SOLD
Some of Tag Heuer’s AquaRacer models have evolved into very attractive “jewellery” watches over recent years. They were first introduced as a continuation of the very successful 2000 series in 2004. Every Aquaracer provides a rugged platform with serious sporting features. Don’t let the dramatic iridescent mother-of-pearl diamond dial fool you. This watch is still made with the right stuff, able to stand up to any task asked of it. Water resistant to 300 meters, synthetic sapphire crystal, threaded crown/case back, luminous hands, solid link stainless steel locking bracelet, and ratcheting timer bezel are the same features offered by the pure tool design AquaRacer models. The beautiful mother-of-pearl dial adds a sophisticated detail that is quite striking against the combination of brushed stainless steel and gold plated trim.
10 high quality round brilliant cut diamonds add some sparkle and a luxury touch. It displays some scratches and scuffs mostly visible on the buckle cover, the bracelet and case show only minor blemishes, nothing significant.
The heavy gold plating is fully intact on the bracelet, but bezels studs are beginning to show some stainless steel showing on the sharp edges.
The lab-grown sapphire crystal is perfect, offering flawless optics and viewing of the iridescent mother-of-pearl dial. At 32.5mm in case diameter, model WAF1320 is easy to read but not too big or bulky. Tag Heuer still makes a contemporary version of this watch for $5,300.00 which can be seen on their website. The previous owner had a smaller wrist; if you have a larger wrist we may need to order you an extra link or two.
This is a great looking watch ready for whatever you can throw at it. It does not come with any original packaging or documents. Including a complimentary 1-year warranty this estate Tag Heuer is priced at $1,800.00 CAD. Stock #520-00165.
We’ve seen a lot of diamonds come through our shop at 52 Dunlop St. West in DownTown Barrie over the past 67 years, but I don’t ever recall having any like these. The latest additions to our estate collection are two Internally Flawless, natural colour, fancy yellow diamonds. In terms of rare minerals, diamonds are scarce but not too uncommon. Natural yellow diamonds on the other hand are indeed few and far between. Our in store diamond database contains more than 600,000 natural diamonds (of at least 0.25 carat) from the world’s largest cutting factories, but only around 13,000 are coloured diamonds.
Of those, less than 10 are this size or larger and of the same or better quality. Not quite 1 in a million, but you get the idea; these diamonds are truly rare. Diamonds like this are not readily available or replaceable.
Yellow diamonds occur when trace amounts of nitrogen are present when the rough diamond crystal formed billions of years ago. If a diamond grows with a trace amount of boron, its color will be blue. These yellow diamonds are both of Internally Flawless (IF) clarity. This means there are no detectable inclusions visible by a trained diamond grader viewed at 10 times magnification. While there is nothing like seeing them in person here are a couple 26 second YouTube videos 1.17ct. pear and 1.24ct. cushion. In person, these diamonds are far more vivid and bright. Both diamonds come with GIA reports from the spring of 2011. The full Gemological Institute of America reports can be seen by clicking these links 1.17ct. pear and 1.24ct. cushion. The pear shape has been set in an American made 18 karat yellow gold tradition solitaire engagement ring.
The simple 5 prong design features a flattering double gallery setting the enhances the fancy yellow colour and provides excellent security. We are showing it with a crescent shaped matching 18 karat wedding ring.
The wedding ring contains 0.10 carats of white SI-GH bead set round brilliant cut diamonds. What sort of jewellery do you think one of these exceptionally rare diamonds would look good in?
We’d be happy to create something unique just for you. I’m thinking perhaps a drop pendant for the pear shape and maybe a halo style ring for the cushion shape. The possibilities are only limited by your imagination. These diamonds are estate priced at $7,000.00 CAD (stone only) for the pear shape and $9,000.00 CAD for the cushion shape. The complete pear shaped ring set is priced at $8,550.00. Stock numbers 191-00079, 191-00080, 101-00656 (engagement ring only), 101-00655 (wedding ring only).
Cushion has been sold.
Ladies Rolex watches are the exception rather than the norm when it comes to our estate collection. There seems to be a regular parade of gents models passing through, but it is uncommon for us to feature a ladies model. This one should prove to be popular with our customers looking for a feminine example of the world’s most popular luxury watch.
This is the Rolex Oyster Datejust 31 featuring an uncommon Gypsy set diamond bezel. When you see a smooth bezel on a stainless steel Rolex, it’s made from stainless steel, unless it is set with diamonds. When Gypsy set with small round brilliant cut diamonds, it is upgraded with a proprietary 18 karat white gold alloy.
Rolex produces unique blends of 18 karat yellow, rose, and white gold in their own foundries for exclusive use in their watches. The smaller 31mm case is still of decent dimensions and is the most popular of the smaller Oysters. This one has also been optioned with the upgraded diamond Roman numeral dial.
Looking at the current version of this model, the white gold diamond bezel is a $6,150.00 upgrade over the basic model. Adding the beautiful diamond set hour marker at 6:00 o’clock costs an additional $2,000.00 bringing the replacement price to $17,400.00. The rest of the features of this slightly smaller Oyster Perpetual are the same as its big brothers. Fully automatic self winding movement is guaranteed accurate to within certified chronometer tolerances or just a few seconds per day. The Oyster case is watertight to 100 meters thanks to its screw down crown, screwed on case back, and the high pressure fit nylon gasket securing the lab-grown sapphire crystal.
The more casual Oyster link bracelet gives this Rolex a more casual look and sporty look.
This is the first time we’ve seen the bronze sunburst dial. The earthy hue blends well with any outfit and can be worn to any event. The “easylink” bracelet extension gives you 5mm extra bracelet length by just pulling on the last link.
It’s a great feature for those days when a touch more room makes for the perfect fit. This watch is in original condition and has never been polished or refinished. The vast majority of wear is curiously on just the bottom half of the locking buckle, the top section is almost perfect.
We can easily polish away any blemishes in just a few minutes if you want it looking completely new. It was purchased from an authorized Rolex agent in the summer of 2022 and remains covered under the Rolex warranty until July of 2027. Comes complete with the endorsed warranty card, original documentation, inner/outer boxes, all in like new condition. This uncommon Rolex is estate priced at $16,000.00 CAD. Stock #505-00615.

Emeralds are by far the most difficult gems to find with an attractive colour and clarity without paying top dollar. Natural emeralds that do not have significant clarity altering inclusions are rare; the more pure and vivid/intense the green, the greater chance it displays poor clarity.
That’s the advantage of our estate jewellery, we often feature high quality, vintage jewellery that has been assembled from premium components, but priced less than the average quality you typically encounter. Our latest estate ring is a great example of excellent value estate jewellery. This emerald is a beautiful green colour with minor inclusions that have only a small impact on overall transparency.
It is a decent size measuring 7.0mm x 5.1mm and is estimated to weigh 0.58 carats. The surrounding 10 natural round brilliant cut diamonds are also better quality and larger than you’d typically see on a cluster ring. The diamonds are estimated to weigh a nice tidy 1/2 carat and of of easy SI1 clarity with an H or better colour. The average size 7 ring can be adjusted up or down as required.
Crafted from 14 karat white gold, the ring is showing almost no wear except the original rhodium finish is mostly gone as we polished the shank in preparation for sale. Bright green emeralds with good clarity are illusive, this is a very nice example of a classic design. Estate priced at $1,440.00 CAD. Stock #206-00633.
Even though Breitling have been around since 1884 and make some very popular sports and pilot watches, they have never produced their own mechanical movements until the calibre B01. Like may companies, they modify existing high quality mechanisms from Swiss suppliers like ETA and Valjoux. Breitling certify and upgrade every movement leaving their factory to compliant with chronometer specifications for accuracy. Not wanting their production to be limited and sometimes dictated by outside suppliers. In 2009 Breitling debuted an entirely new calibre designed and built in-house, gaining independence from third party movement manufacturers. The proprietary 47 jewel B01 inside this Navitimer 46 is the result.
The single mainspring design stores a remarkable 70 hours of power reserve when not being worn and easily conforms to accuracy levels awarding it chronometer grade status. This beautiful movement can be seen through the case back display window.
The watch industry is paying close attention to Breitling and more specifically to this proprietary movement. Breitling reached an agreement with Rolex sibling company Tudor allowing them to use the B01 chronograph movement in Tudor Chronographs. In exchange Breitling has access to Tudor’s 3 hand in house MT5612 movement (renamed B20 in Breitling products). For two major watch brands to cooperate like this is very unusual; it shows how much each manufacturer mutually respects the quality of these mechanisms.
Rolex have their Daytona Cosmograph and Omega have the Speedmaster Moonwatch. If there is one watch Breiting aficionados hold near and dear it’s the Navitimer. Since 1952 it has been considered one of the finest pilot watches available. While the Daytona and Speedmaster have a fixed tachymeter scale handy for measuring units per hour, the Navitimer comes with a rotating slide rule and also a 31 day calendar for even more utility.
The slide rule bezel can do anything from calculating the tip needed on a restaurant bill, to determining fuel consumption rates, air speed calculations or a multitude of other mathematical formulas. A comprehensive booklet is included outline the various functions the slide rule is capable of. It’s not a simple dial; there’s a lot of very tiny numbers to interpret but it certainly has a very professional look about it. At night only the basic timekeeping reference points have been treated with luminous material avoiding confusion with information overload.
Navitimers make rare appearances in our estate department and this “reverse panda” dial example is very handsome and should be popular with our watch enthusiast customers. The contrasting silver on black dial with silver chapter ring is especially attractive. The watch is in original condition, showing scratches on the buckle and the case. These scratches are shallow and can be polished away by one of our technicians while you wait if you wish. We always leave our estate watches in the condition we receive them in, leaving the choice to polish/refinish up to the next owner.

The soft flexible Breitling crocodile strap is showing some wear but has lots of life left; it is secured by a stainless steel OEM deployment buckle that allows for easy length adjustments.
The watch was purchased in 2017 at a Canadian authorized agent (this is not a grey market watch). A more complete example is going to be difficult to find. Inner/outer boxes, documents, booklets, digital/dated warranty card come included along with a cardboard whiz-wheel.
If you’ve always wanted a Navitimer, this is a good one to consider. If you’d like a new one, you can still purchase a contemporary 46mm Navitimer as seen on the Breitling website for $12,400.00. The watch is running great and keeping excellent time. Including our complimentary 1-year warranty this watch is estate priced at $6,500.00 CAD. Stock #515-00109.
SOLD
Silver recently touched $76.00 CAD per ounce and has fallen back to around $68.00 as of today (Nov. 3, 2025). Many feel there is much more upside to the price of silver and other precious metals. Obtaining physical silver is very difficult right now because many refiners are no longer accepting scrap silver for refining because they are overwhelmed with scrap silver. We think this situation will sort itself out over time when market conditions become more normalized.
Premiums for buying the physical metal are once again seeing significant increases. If you have some, holding on to it may be a good idea. We do not consider ourselves precious metal dealers but we do come across some interesting bullion from time to time. These 5 x 1 ounce Johnson Matthey 999 fine silver bars are very desirable to those who want to own and hold the actual metal. They are still factory sealed and show consecutive serial numbers. If you’re interested in buying them DO NOT WAIT, we expect these will sell very very quickly. They are priced at just 10% over spot pricing. Collectable JM bars typically trade hands for larger premiums than generic bars. Stock #912-00813.
SOLD
Get yourself a gold watch while the prices are still cheap. We feel this statement accurately reflects the current market prices of luxury gold watches, especially used and vintage watches. Consider the simple fact that basic commodity cost of raw gold has tripled over the last 6 years, but the retail pricing of most brands has risen only by around 50% on gold watches. Take for example the classic Rolex Day-Date 36 128238. In 2019 the retail price was $36,250.00 CAD; today the same watch cost $56,750.00 CAD. During the same time period (2019-2025) the price of gold has exploded from $1,800.00 per ounce CAD to over $5,600.00 per ounce.
It is of our opinion that manufacturers will accelerate price increases on gold watches until they better reflect current commodity costs. Another scenario that makes sense would be to increase the production of stainless steel models and and slow down the production of gold watches, lessening the impact to the bottom line or maybe even stop making gold watches all together. Whatever happens, one thing is for sure, we are seeing fewer and fewer solid gold watches pass through our estate department. Our latest gold watch is this beautiful Panerai Radiomir 1940 3-Days reference PAM00575 crafted from 18 karat rose gold.
This model was introduced around 8 years ago and came with a USD retail price of $18,100.00. Most Panerai we see are very large, very thick, and make a bold statement. While the 18 karat rose gold Radiomir isn’t small at 42mm, the thin 11.5mm profile and short lugs make for an easy the wear watch. 
Not a true sports watch yet not exactly a dress watch either with an instantly recognizable Panerai face that is all function. A matte black sandwich dial with oversized Arabic 12,3,6, large hash mark hour indexes, all treated to some of brightest luminova you’re going to encounter.
The Panerai “Sandwich” dial is a unique detail that gives many of their watches a special look with a practical advantage. An exquisitely pierced dial is layered on top of a luminous disc that glows from the bottom.
This layered manufacturing technique allows maximum luminous properties without a large surface applied frame to stabilize the delicate glowing material. In the daylight this makes the hour markers appear sunken below the dial surface. In the dark the hour markers explode in a luminous display that is much brighter than you’d expect given the actual area of luminous material. Powering the Radiomir is a proprietary in-house manufactured 21 jewel hand wind mechanism. When fully wound this beautiful movement can power the watch for 3 full days. Many of the 152 components used in calibre P.1000 are visible through the case back display window.
This movement measures less than 4mm in thickness and features an unusual fly-back hacking seconds hand. When the threaded crown is pulled out fully into the setting position the small subsidiary seconds hand at 9:00 o’clock instantly flies back to the 60 seconds position.
This is a thoughtful detail for synchronizing the time with an audible time signal. This watch was delivered in Canada for an authorized Panerai agent in the late 2019 and comes complete with all of the original packaging, documents and endorsed warranty card.
It has hardly been worn, never polished, and looks like new old stock. The top grade black crocodile strap is blemish free and shows no evidence of use. Attached to the strap is a signed Panerai 18 karat rose gold buckle that is secured with a threaded screw.
The watch is running great and keeping excellent time. There is definitely something special about the wearing experience of a gold watch. The added density of 18 karat convey a genuine feeling of luxury. The gross weight of the watch including the strap is a significant 100 grams.
We are happy to provide the next owner with a no charge 1-year warranty. If the price of gold continues to rise it’s just a matter of time before production costs will result in retail pricing almost no one can afford; and those who can, they may refuse to purchase because the perceived value may be difficult to identify. $16,000.00 is quite a bit of money, but priced by the gram this gold watch and many other solid gold watches offer some genuine value. Get em while you still can. Stock #501-00395.
SOLD
High quality and beautiful design never go out of style. The diamond cluster has been around in one form or another for hundreds of years. Round, oval, pear, square, marquise, or any other shape you can imagine look good when built in proportion with high grade ingredients. Our latest estate ring showcases an unusual cornflower blue natural sapphire. The pear shaped centrepiece measures a lavish 8.0mm x 6.6mm x 4.2mm and is conservatively estimated to weigh at least 1.66 carats. Its colour can be described as medium intense blue with a hint of violet.
The ballerina moniker comes from the baguette diamonds in the cluster that are set at different heights in a scalloped edge bezel resembling the multiple silk layers of a ballerina skirt. We’ve only had a few true ballerina rings over the years and this one is one of the prettiest. 26 baguette cut diamonds make up the halo frame resulting in a overall dimensions of 15.3mm x 12.3mm. The high quality (VS clarity with HI colour) diamonds do a great job of contrasting the violet/blue sapphire centre stone. We were surprised to find out this ring was completely rhodium plated over the original rich warm hue of premium 18 karat yellow gold.
The previous owner must have preferred the look of silver/white precious metals over traditional yellow gold. After we started polishing the ring we notice the original warm yellow gold coming through the rhodium as we polished through it. There are still some remnants of the rhodium plating on the bezel, inside the cathedral shoulders, on the shank edge, and inside the band. We left it looking mostly like a white setting with yellow shank design, but we can remove most of the left over rhodium or replate it with white rhodium again to suit your preference. This is a premium quality sapphire with an intense colour you don’t often see.
Most commercially available sapphires are an inky dark blue colour with little value. It’s too bad most people don’t get to see sapphires of this quality. The ring measures a finger size 7 and can adjusted up or down by one of our onsite goldsmiths as requires. There is a ton of value in a ring like this for the estate price of $3,500.00 CAD. Stock #206-00631.
Have you checked out the pricing lately of a good used Rolex Daytona or Omega Speedmaster Moonwatch? Finding a classic Swiss chronograph without spending a fortune is getting more difficult all the time. A not so strong Canadian dollar is adding to price increases too. The Tag Heuer Carrera CV2010-0 is a watch that offers a classic, purposeful, sporting look without the sky high pricing.
The Carrera was introduced in the mid 1960s and was arguably more popular than the benchmark Rolex Daytona of the period. It was standard equipment on many wrists of automotive sports participants, especially in rally car racing. Even today the Carrera looks the same as it did over 50 years ago.
Instead of a manual winding 17 jewel movement, the modern Carrera chronograph is equipped with a 25 jewel automatic Swiss made mechanism with a 12 hour chronograph and calendar (something the original lacked). This example is powered by an original Valjoux 7750 automatic winding movement, not one of the Sellita Swiss clone movements. The nicely finished mechanism is visible through the display back.
It’s a reasonably sized watch showing a case diameter of 41.5mm. The timeless black dial with silver chrono registers a look that never gets old. If you ever decide you want to go all in for a Daytona or Moonwatch, a Carrera like this are always welcomed back for trade in. Our example is in good condition. The previous owner wore it all the time. It has been maintained at Bill Le Boeuf Jewellers and was last serviced by us a few years ago. It is running well, keeping good time, and all functions are operating as designed. Showing some areas of wear and tear, but it’s honest patina that comes from an enjoyed wearing experience.
If you have a larger wrist we’ll need to order an extra link or two as this one is missing a few of the original removable links. There is a lot of value in a previously enjoyed Carrera. An entry level contemporary Carrera as seen on the Tag Heuer website comes with a price of $6,200.00 CAD. Complete with a 1 year Bill Le Boeuf Jewellers warranty our estate Carrera is estate priced at $1,800.00 CAD. Stock #520-00162.
From time to time a funky retro piece comes to our estate department that must be showcased. Many lesser quality, thin, light versions of these have been recycled for gold content over the last 30 years or so. It’s no secret that most herringbone necklaces got kinked because they were made very frail and did not stand up to regular wear. Yes, even when gold was only worth 1/10th of what it is today, manufactures were battling to make this sort of necklace as light as possible with disastrous results. This example is not light, frail, weak, or thin. This is how they all should have been made. It measures a showstopping 11.5mm in width, and weighs well over one troy ounce at 34.7 grams.
Constructed in Italy it displays the high level of craftsmanship that the Italians for known for, beautiful finish, heavy duty findings that are attached for perfect precision.
The overall length of 17 inches will fit the average to slim neck perfectly. It is wide and heavy but also extremely flexible, able to follow the subtle contour of the feminine neckline.
This herringbone is especially attractive, highlighted with thousands of tiny bright cut details that catch the light adding sparkle with the slightest movement.
This necklace shows zero wear in any of the joints and appears in like new condition. Retro is back and we are getting more requests for herringbone necklaces again. This extraordinary example is estate priced at $3,350.00 CAD. Stock #431-001001.
If you’ve always lusted after a Panerai but felt the size would be a little overwhelming on an averaged sized wrist, the Quaranta may be your next watch. The comfortable 40mm cushion shaped case features thin wire lugs adding to the easy wearing experience and reenforcing its vintage look. Function has always been the priority of Panerai watches, PAM01572 excels in this capacity.
A simple black dial with extra large Arabic/stick hour markers, thick long hands, a subsidiary seconds hand (9:00 o’clock) plus a useful calendar (3:00 o’clock) round out the utility.
The Panerai “Sandwich” dial is a unique detail that gives many of their watches a special look with a practical advantage. An exquisitely pierced dial is layered on top of a luminous disc that glows from the bottom. This manufacturing technique allows maximum luminous characteristics without a large surface applied frame to stabilize the delicate glowing material. In the daylight this makes the numerals and stick hour markers appear sunken below the dial surface.
In the dark the hour markers explode in a luminous display that is much brighter than you’d expect from the parchment coloured markers and hands.
The slim profile of just 10.5mm is rather remarkable for an automatic watch with a 3 day power reserve, and a domed lab-grown sapphire crystal.
Panerai movement P900 is an in house 25 jewel masterpiece and the brands thinnest at just 4.5mm. It is shock protected and consists of 171 perfectly engineered components. The watch appears to be is like new condition showing little to no wear. It comes with two additional original signed Panerai leather straps that add around $700.00 of extra value to this estate watch.
Also included with the package is a hard rubber bezel guard, original inner/outer boxes, instruction booklet, open warranty card, product stickers, never used polishing cloth, screw driver that can be used for strap swapping, 3 strap boxes, and a separate travel case. The watch is running great and keeping excellent time. Including our 1-year warranty this realistically sized Panerai is estate priced at $7,500.00 CAD. Stock #501-00396.

SOLD
Tiffany designs are are often copied directly or are the inspiration for many styles that become mainstream at many jewellery stores. We’re not sure if this is a stylized four leaf clover or another floral interpretation but the balance and symmetry are captivating on a miniature scale. This is a small pendant measuring just 8.3mm in width.
What it lacks in outright dimension it makes up for in visual impact. The four inward facing bezel set pear shaped brilliant cut diamonds form the main “leaf” sections with four tiny round diamonds filling in the negative space between. The centre of the blossom features a slightly larger bezel set round diamond.
The nine diamonds are of standard Tiffany quality (minimum VS-GH). The pendant and 16 inch rolo style chain have been crafted from platinum. Platinum is the preferred choice for premium jewellery when a silver/white look is the goal. White gold isn’t as white and needs a coating of rhodium to cover up its natural warmer hue. Platinum is very dense, even 18 karat gold is noticeably lighter than platinum. On a small pendant such as this, a little extra weight doesn’t hurt and helps keep the pendant centred. The necklace is secured by a small but sturdy spring ring clasp.
This rare pendant is no longer shown on the Tiffany website and there are few examples we could find online. Calculating the diamond weight is a little more difficult with bezel settings as we can’t be 100% sure of the diamonds dimensions. With careful measuring and estimation by formula we estimate this pendant contains 0.19 carats of top quality natural diamonds. The pendant is in excellent condition, comes with its original signed Tiffany black box, and is estate priced at $2,100.00 CAD. Stock #161-00266.
If you’re familiar with the Bell & Ross brand, you likely picture an oversized square case watch that looks like an instrument you’d see on an aircraft cockpit dash. They also produce some interesting designs from their Vintage collection that are a little more traditionally styled. Our newest estate watch is one of their most basic looking but it still has the look of a military issued timepiece. For a high quality, function first watch, it would be pretty hard to beat the Bell & Ross BRV192.
At 38.5mm in diameter its a size that anyone can wear. The large dial and thin bezel make the watch wear a little larger than the size suggests. At only 11mm in total thickness it is easy to tuck away under a shirt.
The semi-gloss black dial is rather minute centric with large printed Arabic numbers printed inboard of the hour markers and a thin minute track on the outside dividing the seconds into fifths. Even the extra long minute hand reaches almost to the outer edge of the dial. All 12 hour markers and hour/minute hand have been treated to a luminous faux patina mimicking a vintage watch with radium or tritium luminous paint. Despite the tan hue they still glow effectively in the dark.
The triangle with two dots is a traditional feature found on many military watches to easily instantly distinguish the 12 o:clock index.
I’m not sure if by coincidence or design that the tail of the seconds hands appears to be the silhouette of a delta winged jet aircraft. As a final acknowledgement to the military design the MT in a red circle stands for Military Type. A small calendar between the 4 and 5 is a small concession given for a little utility.
The tiny cutout hardly interrupts the perfectly balanced dial and is very discreet with thin white print on a black background. The domed sapphire crystal is a vintage looking feature that also disperses reflections better than a flat surface. Powering the BRV192 is the Bell & Ross calibre 302 (Selitta base SW300) it is a robust performer with a more than 2 day power reserve.
The original strap and buckle have been replaced with a generic replacement. The 20mm lug width allows a large variety of choices for different straps. If comes complete with the original inner/outer boxes, endorsed warranty card and product tag showing a retail price of JP¥269,500 Japanese Yen ($2,400.00 CAD).
The Japanese Yen is currently very low compared to many international currencies. It has lost more 25% of its value compared to the CAD over the past 5 years. This watch is in very good condition showing little signs of use except on the generic strap. Bell & Ross still feature this model on their website where it is priced at $3,100.00 CAD. Including our 1-year complimentary warranty this watch is estate priced at $1,950.00 CAD. Stock #501-00347.
Estate earrings are great sellers and customer favorites. Our newest estate pair are these Huggie designs shaped like the letter J. They operate with an always lined up interference post that securely locks into the backside hinged section. No chance of losing a butterfly friction back with these, or losing the entire earrings. When you hear the audible click, you know they are secure and not going anywhere. These ones measure 18mm tall and 6.2mm wide with a little bit of a waist in the middle section.
They feature 6 small round diamonds (0.03 carats total weight SI-IJ) that have been bead set into mirror image corners with bright white rhoium plating for contrast against the yellow gold.
The earrings display a soft brushed finish that doesn’t show well in our pictures. This subtle finish can be enhanced in a few minutes or completely polished away by one of our onsite goldsmiths while you wait. We love the substantial feel of this pair weighing in at over 5.4 grams. They have been made with upgraded 14 karat yellow gold. With the high price of gold these days you don’t see Huggie style earrings too often and when you do they are hollowed out to keep the weight down.
This modern set is in excellent condition with a tight hinge and no signs of wear and tear. Shop them around; 14 karat cast huggie earrings, 5.4 grams, hand set with 6 small diamonds. They offer excellent value for the estate price of $1,020.00 CAD. Stock #151-00371.
Classic vintage good looks never grow old. This is a watch that looks like it came off the wrist of a rally car driver from the 1960s. At that time the Heuer Carrera was the watch to have. I’m sure much of this Hamilton Intra-Matic design was partially inspired from those marvellous Carreras.
The “panda” dial is especially handsome making the modern 40mm case size even more functional. Some of our favorite estate watches from many years ago featured panda dials. Talk about sellers remorse, I wish we still has these classic Pandas.
The black tachymeter scale has numbers large enough that even 40 to 50 years old eyes can interpret.
Modern manufacturing and materials make the Hamilton Intra-Matic a much more capable performer while maintaining the vintage appeal.
Fully automatic movement means no manual winding every day. A sapphire crystal can ward off almost any impact compared to the original plastic crystals from the 60s. The Hamilton also comes with a 10 bar (300 feet) water resistance rating thanks to its threaded crown and case back.
This watch was purchased in the summer of 2024 and was only lightly worn with almost all the wear limited the the signed buckle.
The watch remains original and unpolished. The parchment backside of the original black strap looks unworn. Included with the watch is the 5-year Hamilton warranty that expires in July of 2029. It was purchased at an Ontario authorized agent and comes complete with all documents, packaging, and even the original bill of sale. This watch is a current model that can be seen on the Hamilton website where it retails at $3,210.00 CAD. Our excellent condition estate example is priced at $2,100.00 CAD. Stock number 501-00393.
30 years ago the average sized diamond we’d sell as an engagement ring was somewhere between 0.33 to 0.50 carat. Today the average size 2.00 carats or larger, but 90% of those are inexpensive lab-grown diamonds. Most younger customers are opting for cheaper manufactured diamonds that cost only a few percent of what a natural does. Our newest estate showcased item is this delicate natural diamond ring that would have been considered large only 3 decades ago. The petite 14 karat white gold ring is the epitome of classic design. Just a simple shank measuring only 1.9mm wide.
Secured in a basic double gallery setting is a square modified brilliant cut diamond commonly referred to as a “princess cut”. This diamond is a high quality VS2-G with a very good cut. It is almost perfectly square with measurements of 4.83mm x 4.82mm and a depth of 3.50mm. It has a GIA report confirming the quality, dimensions, and natural origin. The flat edge ring measures a finger size 5 and can be adjusted up or down as required. This timeless solitaire design can be paired with almost any wedding or anniversary ring as long as it has a flat edge.
No need to have an expensive custom made ring made to compliment it. It is in like new condition, never polished or refinished, still retaining the original bright white rhodium plating. A GIA report is an desirable and expensive nonbiased report on just the diamond. It’s your guarantee the diamond is of the stated quality, GIA do not provide appraisals of value and no interest in the commerce of jewellery. For little more than the cost of a lab-grown diamond, wouldn’t you prefer one of mother natures sparkling creations? This diamond ring is estate priced at $1,800.00 CAD. Stock #101-00645.
The futuristic appearance of the Tag Heuer Kirium is surely get noticed. This oddity was a bold design exercise for Tag Heuer and looks like nothing before of after. The conservative nature of the Swiss watchmaking industry is more about evolution than revolution. Many classic brands and models look the same today as they did decades ago.
The rounded bubble design concept of the Kirium extends into the bracelet with a subtle curved profile, a domed lab-grown sapphire crystal flows gently into the rounded bezel, the notches for grasping the one way timer are semi-circular cut outs. The luminous glowing hour markers are domed, and even the Arabic 12/6 o’clock markers have a curved profile to them.
A lot of thought was given to the aesthetic of these uncommon models. There isn’t a sharp edge or corner anywhere to be found. It pairs perfectly with our new circular shell travel cases.
When we were authorized agents for Tag Heuer in the 1990s and 2000s, the Kirium sold okay but were never really that popular. Today they are rarities and seldom show up in our estate department. This one is pushing 25 years old and has remained in original condition.
The circular details are easy to refinish on this model, but we’re happy to report the previous owner resisted the temptation to polish the scuffs and small scratches that accumulate over time. The solid link bracelet is very tight showing little wear and is secured with integrated flip lock clasp.
The 3 hand high precision quartz movement is functioning flawlessly and features a useful calendar. A thread crown and threaded case back provide a water resistance rating of 200 meters.
Funky looks but this is still a serious Tag Heuer watch that can handle anything asked of it. Included with purchase is our complimentary 1 year warranty. Estate priced at $900.00 CAD. Stock #520-00160.
Natural diamonds aren’t going anywhere, they are among the oldest objects on earth dating back 3 to 4 billion years ago. Lab-grown diamonds have only been widely available for the last 10 years or so. The knowledge to produce them comes from the 1950s when General Electric was able to make some poor quality diamond crystals. 70 years ago the technology to produce lab-grown diamonds cost far more than mining natural diamonds. Technology always gets cheaper and more accessible over time. Today, high quality lab-grown diamonds can be found for only around 1%-2% of the cost of the natural equivalent. They are being grown in China in factories covering hundreds of thousands of square feet. Our database of lab-grown diamonds shows close to 800,000 are available with more on the way everyday. We can sell you a beautiful 2.00 carat round lab-grown diamond of exceptional VVS1-E quality for only $1,000.00 USD or less!
The same quality for an earth grown natural diamond is priced closer to $45,000.00 USD. Our latest estate ring is not a 2.00 carat VVS1-E, but it is a 100% natural diamond that is around 3 billion years old and weighs a significant 1.40 carats. Its clarity is a nice SI1 with a L colour.
The cut is very good and it displays medium blue fluorescence when exposed to long wave ultraviolet light.
You’d never see a modern lab-grown diamond that exhibits a slightly warmer colour, and no lab-grown diamond would glow like this under longwave ultraviolet light. Our natural diamond has been set in a classic 4 prong white gold setting with a 4mm wide “Tulip” shank.
The sturdy size 6 1/2 ring weighs 4.7 grams and can be adjusted up or down as required. It is in excellent condition and looks like new after a professional polishing and cleaning.
It is accompanied by a 2010 Appraisal Report from Gem Lab Toronto suggesting a retail replacement value (at the time) of $14,350.00 plus tax.
There is no denying the fact that lab-grown diamonds have brought the price of natural diamonds down. It is also true that natural diamonds have a cost that can’t drop below the cost to find, mine, and cut them. Who knows where the diamond business is heading but we believe there will always be a market for the miracle of natural diamonds when presented accurately. Our estate jewellery offers some great opportunities without compromising the tradition and desire for an earth grown diamond. This beautiful diamond is estate priced at only $3,250.00 CAD. Stock #101-00644.
SOLD
Every Rolex is collectible to a degree, some more so than others. What distinguishes the most collectible are not only the uncommon and rare models but also their story and history. The history of the GMT is a notable one that goes back to the 1950s. High speed long distance air travel was becoming the norm and pilots travelling across multiple time zones in a single trip was common place. They needed a watch that could keep track of a worldwide standardized time plus the local time of where they currently were. Greenwich Mean Time (GMT) was adopted as the constant. This “universal” time is displayed by the long thin arrow style 2nd hour hand on the watch and displays hours on the all black outer bezel in a 24 hour format.
The regular hour hand can quickly and easily be adjusted independent of the long 24 hour hand. It may sound a little confusing but in practice it’s quite clever and easy to use. Overall condition is very good. The original oyster bracelet shows little sag and no stretch.
You don’t need to be a pilot to love the GMT Master. Anyone who needs to keep track of local time in a 12 and 24 hour format (nurses, police, military etc.) will appreciate how easy the watch is to read and interpret.
Its D705491 serial number places production in late 1999. At 26 years old it can be considered a vintage Rolex but still showcases modern and convenient features. Sapphire crystal, quick set date, 18 karat gold stripe through the fliplock buckle, with bright luminous markers and hands.
The watch is worn but hasn’t been abused; although the previous owner certainly kept it polished, focusing on the buckle where scratches accumulate the most.
It is keeping great time with all functions working as designed. We are happy to supply the new owner with a complimentary 1-year warranty. Estate priced at $12,990.00 CAD. Stock #505-00547.

We tend to showcase classic styles, vintage, and antique jewellery, but we also have some modern contemporary designs in our estate department. This practically unworn, modern abstract garnet and diamond ring offers and attractive yet unconventional look. Low bezel and channel settings protect the stones and are in keeping with the flowing lines.
The six natural diamonds and estimated to weight 0.20 carat total weight and are a better than expected SI-I quality. The garnet displays the classic rich brownish red hue but is cut in an unusual triangular faceted shape. Crafted from 14 karat white gold in a size 8, the ring weighs in at a sturdy 5 grams.
It looks like new old stock, the bright white rhodium finish is in perfect shape, showing only some light scuffs on the shank bottom. Whether you have a birthday in January or simply appreciate the beautiful contrast of almandite garnet in white gold with bright diamonds, this ring offers a fun casual look for everyday wear. Estate priced at $1,000.00 CAD. Stock #206-00309.
When the Rolex Submariner debuted in 1953 it was regarded strictly as a highly functional “tool” type watch. Made to accomplish a few specific tasks under some very harsh conditions. It was the first watch waterproof to a depth of 100 meters, now they are rated to 300 meters.
The rotating bezel made it possible to quickly calculate elapsed time. It was never designed to win any beauty contests. A few decades later a calendar appeared on the watch adding an obvious and handy feature. Shortly after that a solid gold model became available. In 1984 the first steel and gold combination added a new more affordable “jewellery” version.
Model 11613 came out in the late 1980s and featured the then new Rolex caliber 3135 movement that powered submariners for the next 25 years. This movement is considered one of the most durable and reliable available. An almost 50 hour power reserve is longer than many automatic watches even today. Retired from production in 2009 has made the 16613 just a little more desirable. Replacement model 126613 has grown a touch to 41mm diameter but now comes with a ceramic bezel insert, updated case and bracelet but still has the familiar look that was established decades ago. A brand new 126613LN will also run you $22,250.00. This example dates from 1991 and includes the original box with endorsed warranty papers.
These are showing up less and less as collectors are beginning to take good examples off the market. A full technical revision was performed on the watch in 2016 including an replacing the factory crystal, crystal gasket, case gasket, bezel insert, vacuum and pressure testing. Overall condition is very good, the bracelet shows very little sag or stretch.
The watch has been carefully and respectfully polished, the four lugs are still thick and display a nice crisp beveled edge that often is missing on overly polished cases.
You would never guess looking at the condition that this watch was made 34 years ago.
Comes complete with original box and paperwork. Bill Le Boeuf Jewellers complimentary 1 year warranty is included for the estate price of $15,000.00 CAD. Stock #505-00606.
Step into the world of refined elegance with our latest arrival – a platinum Tiffany Soleste half eternity band adorned with Tiffany-standard exquisite round brilliant cut diamonds. With a total carat weight of 0.17 carats, this mesmerizing piece effortlessly captures the essence of sophistication.
Comprising 20 high-quality round brilliant cut diamonds, the delicate yet impactful design weighs a graceful 2.7 grams. A perfect fit for a finger size 6, this Tiffany Soleste half eternity band also offers room for adjustment.
The band was originally purchased in 2015 for $3,000.00 and is currently listed on Tiffany’s website for $4,500.00. Ours is accompanied by its original black box and receipt for the estate price of $2,475.00 CAD. Stock #121-00226.

Original Heuer Autavia watches are commanding huge prices these days. A decade ago really nice ones would change hands for a couple of thousand dollars. Today these same watches are selling for 10 times that figure. In fact last year we made an even trade with a no box/papers vintage Autavia for a stainless steel full kit Rolex Daytona. This practically new Autavia combines the handy features of a 12-hour chronograph along with a rotating bezel that displays a second time zone. These features are perfect for the world traveler, pilot, or automotive racing enthusiast.
The 42mm case size and 16mm thickness really helps capture the vintage character of the watch. “Panda” dial, HEUER only dial logo, tan luminous hands, and hour plots reinforce the vintage look. Looking at an original Autavia it’s easy to see that Tag Heuer got it right with the re-edition. This image was taken from On The Dash.
They are a fantastic online resource for any vintage Heuer fan. This example is one of the early versions of the re-issue with the unique chronograph minute register design. The early versions of the re-issue were indexed showing 12 markers at 2.5 minute intervals, which really doesn’t make a lot of sense for ease of interpretation, but it does balance with the look of the constant seconds sub-dial. This is perhaps a case of aesthetic design winning over practicality. Later versions received the 30 individual hash marks that more clearly displayed the elapsed minutes.
The original vintage Heuer dial displays the full 30 minute hash marks. As a modern Tag Heuer this watch benefits from a super hard synthetic sapphire crystal treated with an anti-reflective treatment, luminous hands/markers, proprietary in house developed 33 jewel column-wheel calibre 02 movement with an extended 75 hour power reserve and a handy 31 calendar in a small aperture located in the constant seconds hand white 6:00 sub-dial that practically goes unnoticed. The beautifully finished automatic winding movement can be seen through a display window on the case back.
The movement is a micromechanical work of art. Our latest estate watch is very good to excellent condition. It was only occasionally worn with great care and caution. The fully polished finish exhibits some fine scratches and scuffs but nothing significant or distracting. It has never been refinished in any way and is 100% complete and original.
The previous owner purchased the OEM distressed tag leather strap along with the HEUER signed stainless steel buckle.
This extra accessory would have added around $300.00 more to the Autavia MSRP of $5,450.00 USD. The leather strap swap gives the watch a much more casual look.
With a small, sharp screwdriver, the switch back and forth from metal to leather can be done in about a minute. Comes complete with all the original packaging, booklets, open warranty card, product sticker sheet, extra bracelet with shipping bag. We only have one and it is priced at $5,200.00 CAD. We ship duty-free to most international destinations. Stock #520-00012.

This beautifully simple pendant came to us a few years ago in the form of an antique stickpin. It sat around in a box of future projects on my desk few several years. As a pretty as the antique stick pin was, it didn’t have much of a market or contemporary purpose. It was too attractive to recycle for parts, but not valuable enough to reset the parts into a new custom piece. So we simply cut off most of the wire pin, bent the remainder into a loop, soldered it closed and viola we have transformed it into a fantastic and stylish pendant. The pendant portion is at least 100 years old because the white sections holding the two natural diamonds are made from silver; white gold wasn’t invented until the early 1900s. The rest of the delicate yellow gold pendant was tested and found to be 18 karat.
We’re pretty sure the cornflower blue sapphire is an early lab-grown example as we can’t see any internal inclusions that look natural. Lab-grown diamonds are fairly new to the commercial market but lab-grown rubies and sapphires have been around for well over 100 years. Simple bezel settings with milgrain edges are a classic antique detail and it’s hard to go wrong with any three stone design. The two antique European cut diamonds measure around 2.4mm diameter, weigh around 0.05 carats each and are of SI-IJ quality.
A contemporary 16 inch 10 karat white gold chain easily slides through the newly created pendant bail without obstruction. Combining the old with new and repurposing is something we love to do at Bill Le Boeuf Jewellers. This isn’t an expensive item, but it will make a flattering statement for the next owner. This newly created antique pendant is ready to be proudly worn for the next 100 years and is estate priced at $350.00 CAD. Stock number 161-00379.
SOLD
Omega are known for producing many limited edition watches; to the point that they sometimes don’t seem all that special. Here is a limited edition that came out with little fanfare but is notable none the less. Omega produced just 1948 of these limited edition Seamasters to mark the 70th anniversary of one of their most popular models.
The original Seamaster was itself a commemorative model marking the 100th anniversary of Omega. This watch stays quite true to the very first generation of Seamasters but is manufactured with modern materials and most evolved master chronometer movement in Omega’s line up. The only outwardly obvious difference is the case size is a more modern 38mm diameter compared to the originals that are closer to 34mm. The old style logo found on the dial, crown, and buckle is an accurate duplicate to the first generation as is the arrow shaped and Arabic 3,6,9,12 hour markers.

The tapered hands with luminous stripes always looked a little short in my opinion, still look a little short to me on the limited edition version. The domed crystal on the new version is made of optically perfect and super hard sapphire where the original was made from soft plastic. Omega even went to the trouble of etching the vintage logo in the centre of the sapphire crystal in the same manner as the plastic. The silver dial has a subtle turned down edge and discreet minute track as the original.
The movement inside is far more complicated and accurate compared to what Omega supplied in the late 1940s. The in-house manufactured 35 jewel calibre 8806 qualifies to master chronometer accuracy levels. Omega has thrown down the gauntlet with the introduction of the 35 jewel in-house developed calibre 8806 Master Chronometer movement. This automatic winding masterpiece is certified by the Swiss Federal Office of Metrology (METAS). The testing goes above and beyond the typical COSC chronometer standards. METAS requires all the movements to already be COSC certified but also be stable when exposed to magnetic fields of up to 15,000 gauss. The accuracy requirements are also tighter than COSC. A final test confirming the manufacturer’s water resistance rating (200 feet in this case) is conducted on the complete watch with movement. The beautiful automatic winding calibre is visible through a decorated sapphire display back window.
It has a long power reserve of 55 hours and the hairspring is made from completely non-magnetic silicon. Our example is number 199 out of only 1948 produced for the international market. It comes complete with 3 factory supplied straps and a tool to help swap them out.
The fully endorsed warranty from a Canadian Authorized Agent is dated June 19, 2019.
The fancy faux leather box serves as a display with a magnet stand (both embossed with the vintage Omega logo).
A limited edition certificate, instructions, foam liner, and outer box complete this package. The watch remains in 100% original condition. It displays some scuffs and scratches from a few years of occasional use.
We’ve opted to leave it in original condition. The highly polished lugs can easily be polished by one of our onsite goldsmiths while you wait, if you want it tidied up to look like new. Including our complimentary 1-year warranty, this rare Omega is estate priced at $7,500.00 CAD. Stock #510-00195.
Baume & Mercier made headlines in the watchmaking world in 2018 with the introduction of silicon in the construction of key regulating components found in the Baumatic automatic movement. The hairspring, lever, and escape wheel are all crafted from this high-tech material. Silicon is non magnetic and doesn’t require lubrication, this leads to a more consistent transfer of power and higher degree of accuracy. This sort of innovation was quite a surprise as it came from the quiet brand Baume & Mercier.
The parent company of B & M are the Richemont Group, they also own luxury brands Cartier, IWC, Panerai, Jaeger Le-Coulter, Vacheron Constantin, Piaget, and others. It’s interesting that they debuted this new technology in a moderately priced Baume & Mercier rather than one the their premium brands. Perhaps this is the beginning of a reinvention of the close to 200 year old B & M brand. If the silicon mechanical parts were not enough, the Baumatic BM12-1975A 21 jewel movement also features an ultra long 5 day (120 hour) power reserve.
Most automatic watches have a 2 or 3 day power reserve. The overall look of this watch is very Swiss traditional, especially with the snow white dial. Finely tapered hands and hour markers that allow precise time keeping with easy interpretation.
Fitted to the watch is a high quality chocolate brown crocodile strap.
This watch was originally purchased in Korea in 2019 but has never been used. It comes complete with the original endorsed paperwork, packaging, dealer (MyungBo) travel pouch, documents, and polishing cloth that was never been used. Baume & Mercier still show this watch on their website where is is priced at CHF 3,750.00 Swiss Francs ($5,950.00 CAD). Including our 1-year warranty (prorated 5 years), this watch is estate priced at $2,600.00 CAD. Stock #501-00295.
SOLD
This is the latest generation Rolex Submariner Date. We’ve had a few of the 126xxx series since they debuted in 2020 often selling before we get a chance to post them. We don’t expect this one to last very long either.
The Submariner Date is without doubt the quintessential sports watch to which all others are judged and the popularity of the model is unwavering. For 2020 Rolex installed their caliber 3235 automatic chronometer movement, which has a longer 70-hour power reserve and a proprietary Chronergy escapement, marking a serious improvement over the previous caliber. Rolex also claim this newest Submariner is accurate to plus or minus 2 seconds per day. If this were a quartz watch, that type of performance would be pitiful, but for a self winding, mechanical watch, that is about as good as it gets at any price point. Service intervals are now a rather lengthy 10 years. Hats off to Rolex for giving their new watches such an extended maintenance schedule.
This is the first Submariner to measure 41mm in diameter, for decades they were always 40mm. You’re certainly not going to see the extra 1mm in the case, but they also increased the bracelet width a touch while at the same time thinning the lugs down a bit. This new silhouette better conforms to every other generation Submariner except for the previous generation 116610 series with the “bulky” looking case. You rarely see any threaded crown line up with the watch case. There is only a slim random chance to get one lined up, and this one is no different being 90 degrees off.
As the crown and waterproof tube wear the alignment may change over time a bit. This one was purchased at an authorized Rolex agent in the summer of 2024. It was hardly worn by a customer of ours and remains in original condition. No touch-ups, refinishing, or polishing has been done, the bracelet has never been removed from the case.
It displays only the minor evidence of use in the form of small scuffs and scratches on the case, bracelet and buckle. The super hard ceramic bezel insert and sapphire crystal are perfect without blemish of any kind. Just a simple ultrasonic cleaning was all that was necessary in preparation for sale. The watch remains covered under the 5-year Rolex international warranty until the summer of 2029.
The hang tags, endorsed warranty card, inner/outer boxes, booklets, instructions, wallets, protective white cardboard sleeve, soft foam box liner and even a copy of the original bill of sale from the authorized Rolex agent that sold the watch are all included with purchase.
Steel Submariners continue to be illusive at Rolex agents and are always on perpetual backorder with long waiting lists and unknown delivery dates. This lightly worn example is estate priced at $17,000.00 CAD. Stock #505-00534.
SOLD
When people ask us if we sell “fractional gold bullion”, I don’t think they mean this sort of thing. Fractional bullion typically refers to a smaller amount than the traditional 1 ounce weight. 1 gram, 10 gram, 1/10 ounce, 1/4 ounce etc. are considered fractional and usually sell for larger premiums than 1 0unce or larger gold coin or bars. With gold prices of over $5,900.00 Canadian right now, there is more demand for smaller more affordable portions of gold bullion. Our smaller gold bullion coins and bars often sell to our regular walk in customers before we have an opportunity to even post them on our website. Our latest “fractional” gold item is this 9999 Johnson Matthey bar that once weighted 1 troy ounce (31.1 grams). After it was bisected into not so even parts, this portion ended up weighing 13.568 grams or 0.436 troy ounces.
It came from a jewellery colleague who was retiring and no longer needed the remainder for manufacturing custom jewellery. It may not be a traditional weight anymore but that doesn’t change the fact that it contains exactly $2,578.30 CAD worth of pure gold at this moment in time (5:00pm Oct. 15, 2025). 20 years ago this amount of gold cost only $280.00 CAD. If only we had invested in gold back then. Who knows what the price of gold will be over the next 20 years, but chances are gold will still be a relevant place to store some wealth. For 1000s of years gold has a welcome means of payment for goods and services anywhere in the world that had any sort of economy. It can be used to pay off almost any debt or it can be stored as protection from inflation that decreases the buying power of paper currency. This is an unusual amount of gold for us to sell, so we’ve decided to let it go for only the value of gold it contains, no extra premiums of any kind. Credit card purchase will be charged a 2% fee to cover the fees charged to us from VISA or MasterCard. For an up to the minute price of gold click here. Stock number 912-00721.
SOLD
Have you checked out the pricing lately of a good used Rolex Daytona or Omega Speedmaster Moonwatch? These watches have been appreciating faster than the recent real estate markets. Finding a classic Swiss chronograph without spending a fortune is getting more difficult all the time.
A weak Canadian dollar is adding to pricing pressures too. The Tag Heuer Carrera CV2011-0 is a watch that offers a classic, purposeful, sporting look without the sky high pricing. The Carrera was introduced in the mid 1960s and was arguably more popular than the benchmark Rolex Daytona of the period. It was standard equipment on many wrists of automotive sports participants, especially in rally car racing. Even today the Carrera looks the same as it did over half a century ago.
Instead of a manual winding 17 jewel movement, the modern Carrera chronograph is equipped with a 25 jewel automatic Swiss made mechanism with a 12 hour chronograph and calendar (something the original lacked). This example is old enough to feature an original Tag Heuer modified Valjoux 7750 movement, which is visible through the display case back.
It’s a reasonably sized watch with a case diameter of 41.5mm. The silver dial with silver chrono registers forms a classic sophisticated look, especially with the ghost grey tachymetre bezel. Our latest Carrera comes with the original solid stainless steel bracelet with a locking buckle.
If you ever decide you want to go all in for a Daytona or Moonwatch, Carreras like this are always welcomed back as trade-ins. Our example is in good condition. The previous owner wore most of the time and it is showing scratches on the case and bracelet. The bezel insert’s edge and bezel frame have some abrasions and impact marks around the circumference.
Showing some areas of wear and tear, but it’s the honest patina that comes from an enjoyable wearing experience by the previous owner. This watch was originally purchased in Canada and comes with the original packaging, documents, and endorsed (not dated) warranty card. Comes with a complimentary 1 year Bill Le Boeuf Jewellers warranty, the watch is estate priced at $2,400.00 CAD. Stock #520-00078.
A champagne dial divers watch is a little usual and we love it. Almost every diver watch comes with a black , blue, or sometimes white face. The sunburst champagne on this Tudor is a sophisticated mature look that really grows on you. The yellow trim of the bezel, crown, and bracelet enhances the luxury look, but this still performs as a serious divers tool. Once we saw this combination in person we quickly changed our opinion of what a divers watch could look like.
It’s retro/vintage in spirit but don’t be fooled, the Black Bay diver series are of thoroughly modern specification. The crystal looks like a plastic dome design from decades ago, when in fact it has been ground from super tough and scratch-resistant lab-grown synthetic sapphire. It offers exceptional hardness and perfect optical properties day or night.
The threaded crown and case-back provide a conservative water resistance rating of 200 meters. Beating within the 41mm stainless steel case is Tudor’s in house designed and manufactured MT5612 automatic winding movement. The 26-jewel mechanism secured inside sets the bar for certified chronometer accuracy levels at this price point.
There isn’t much else on the market offering a 70-hour power reserve, plus a useful calendar that doesn’t cost substantially more. Its silicon hairspring and balance wheel are almost identical to what Rolex use. The exotic material these components are made from are far more stable when exposed to high magnetic fields and shocks. The classic champagne dial may look a little bit old fashion but seen in person the look is a winner. The sunburst finish and neutral hue are easy on the eyes and blend with any casual outfit. This watch was worn intermittently in rotation with other watches owned by the previous owner. Is has not been polished or refinished before. There are very minor scuffs and scratches on the case and bracelet but nothing significant.
Canadian delivered to a Tudor authorized authorized agent in the summer of 2019.
This very good condition Black Bay is still available new from Tudor and shows a price of $8,270.00 CAD on the Tudor website. Comes with the original inner/outer boxes, instructions, guarantee/chronometer certification booklet, endorsed warranty card, paper product hang tag, and white foam box liner, this watch is estate priced at $4,690.00.00 CAD. Stock #505-00528.
SOLD
Mabe pearls or blister pearls are the same as cultured pearls except the nucleus is a semi-circle mother of pearl half bead that is epoxied to the inside the shell of the mollusk. The mollusk instinctually begins to cover this foreign object with a protective nacre. When the pearl is harvested they can be cut in a perfect circular outline or in an abstract shape that incorporates more of the inner shell surface. The possible shapes are quite varied and make perfect canvas’ for the abstract artist/jeweller.
This double mabe pearl pendant showcases two excellent quality pearls that measure more than 14mm diameter. They both display top quality luster showing a rainbow dispersion of subtle pastel colours. The abstract concave oval pendant measures 48mm (without bail) x 23mm.
The expertly crafted bezel follows the outline and contour perfectly in a complicated frame that varies in height around the entire circumference. Six small single cut diamonds provide a small touch of sparkle against the rainbow background. A hinged bail at the top can be used on a variety of chain sizes. It is equipped with a hinge and safety clasp that also allow this one of a kind pendant to be worn on a pearl or other bead style necklace.
The pendant is in like new condition looking unworn. It weighs 14.4 grams and is estate priced at $1,400.00 CAD. Stock #231-00278.
Start your mini silver hoard with these Johnson Matthey bars. They remain sealed in plastic with 3 of the 5 showing consecutive serial numbers. Silver is on move along with gold but silver is only around 40% higher than its 1980 value, compared to gold at around 460% higher compared to where is was in 1980. The current gold to silver ration of around 80:1 which is very wide compared to historical averages, many believe this differential should be closer to 40, 30, or even 20:1 leaving lots of room for higher silver prices. Smaller quantities of bullion like this often find new homes before we even have an opportunity to post them. If you’re a new silver bug already or have been collecting for a while, JM bars are should be on your list as desirable additions. First come first served for these 5 fine silver bars. Email us at info@BillLeBoeufJewellers.com or give us a call if you’re interested in these 705 728 3343. As with all fine bullion, these are exempt of additional sales tax. For up to the minute silver and gold prices click here and add 5% per ounce. Non cash, debit, or e-Transfer purchases are subject to an extra 2% to cover credit fees. Stock #912-00798.
SOLD
Displaying the time isn’t of paramount importance with this watch. This is a timepiece for those connoisseurs who appreciate the art of a traditional mechanical movement.
In the 1960s Maurice Lacroix’s parent company purchased a watch assembling business in Switzerland. They produced high quality private label watches for several different name brands. It has been common practice in Switzerland for well over 100 years for the same manufacture to produce watches for different brands, often using the same movements labeled differently.
With this knowledge and experience it wasn’t much of a stretch to establish the Maurice Lacroix brand in 1975. They are known for producing interesting designs that are big on quality and detail while keeping prices quite competitive. The Masterpiece Squelette 43 showcases a hand wind movement of classic architecture featuring nothing more than a 3 hand display.
No calendar and not even a hack feature that freezes the slow release of power if the crown is pulled out. The 19 jewel calibre ML 134 is old school cool indeed, with poising screws on a large balance wheel that oscillates at a leisurely 18,000 cycles per hour with a 45 hour autonomy. The plates, bridges, and even the mainspring barrel have been treated to the skeletonization process.
Every bit of metal has been removed to display the intricacies of the components showing how they interact with each other, yet still maintaining structural integrity. The mysterious inner workings of a watch are visible for all to see (not just your watchmaker) from both sides. This type of detail is far more difficult than building a watch with just a simple display back. The Masterpiece Skeleton is still being manufactured by Maurice Lacroix, The current Masterpiece can be seen on their website where it is priced at $8,250.00 USD. Our estate example has been lightly worn and is in its original condition showing no polishing of refinishing. We fitted a new 21mm Hirsch strap that utilizes the original signed ML deployment buckle. We left the leather slider tabs in place if you’d like to use the basic Hirsch tang buckle.
It comes with the original fully endorsed warranty card, instruction booklet, the and inner/outer box. This is a watch that is begging to be displayed among cherished belongings even it is only occasionally wound up and worn. We are happy to provide the next owner with a complimentary 1-year warranty. Estate priced at $3,150.00 CAD. Stock #501-00390.
SOLD
“If you don’t know jewellery, know your jeweller”. We are 100% confident the first owners of these rubies were unaware they were buying a “composite” ruby. Composite rubies are plentiful in the market and have been around since the mid 2000s.
Many jewellers and even Gemologists have failed to recognize these assembled stones as they trade hands over the years. Composite ruby are made from low quality natural corundum fused together with high lead content red glass to resemble good to fine quality natural ruby. Where a nice natural 2 carat ruby can easily cost many thousands of dollars per carat, these composite ruby can be had for only $10.00 to $20.00 per carat! The 2.44 carat faceted ruby comes with a 2004 appraisal suggesting a U.S.D. retail price of $3,000.00 for the stone alone!
When fully disclosed we have no problem with these gems as they offer a great look for very little cost. The problem arises when they are purchased without knowledge of this treatment and even worse when supported with appraisal documents, reports, or certificates that do not describe the ruby as altered, treated, or assembled with high lead content glass. They are pretty and look very convincing but hold next to no value.
Our two featured composite ruby rings are both traditional 3 stone designs with natural diamonds in 14 karat white gold and 18 karat yellow gold. We have priced these estate rings for their gold and diamond content plus manufacturing cost, but added zero for the composite ruby in each one. They are both well made and in excellent condition showing little to no wear; the bright rhodium plating is untouched on the white gold example. The yellow gold ring is made from 4.5 grams of premium 18 karat gold (5.5 grams gross weight) containing two natural 0.33 carat round brilliant cut diamonds of I1-LM quality.
They are both a size seven and can be adjusted up or down a few finger sizes if needed. Both come with accurate 2024 appraisals from Harold Weinstein Ltd. Toronto.
Please be an informed jewellery customer and shop only with jewellers who have knowledge of such gems and will stand behind their products. Stock numbers 206-00622 and 206-00551.
About 15 to 20 years ago Swiss Army watches began the transformation from a niche manufacture better known for pocket knives to manufacturing some rather upscale mechanical wrist watches. At the same time the Swiss Army moniker was swapped out for the parent company’s Victorinox brand name. The Swiss brand goes back to the late 1800s as manufactures of high quality knives, and yes they have suppling the Swiss Army with knives since 1891. The AirBoss was the flagship line when this watch was introduced around 2010. They were higher specification models powered by traditional automatic and hand wind mechanical movements. Model 241446 is a rare special edition chronograph powered by the time-tested Valjoux 7750 chronograph mechanism that has been powering many Swiss brands for over 50 years, including Omega, Breitling, Tag Heuer and others.
The 25 jewel movement is visible through the threaded display back of the 45mm AirBoss. A 12 hour chronograph is controlled by vintage looking pushers found on the left side if the case.
The unusual placement on the left side makes for a more comfortable wearing experience and just as easy to operate. The calendar display has also moved from the familiar 3:00 o’clock position to 9:00. As a pilot watch the 2 way internal bezel counts down minutes, unlike a diver bezel that measures elapsed time. The large crown at 2:00 o’clock allows the wearer to adjust the countdown timer indictor.
Hands and markers are covered with luminous pigment for easy time interpretation in the dark.
A glowing shield and cross logo is a secret feature we didn’t know about until we took a couple pictures in the dark.
The lab-grown sapphire crystal is super hard and offers perfect optical properties. A high grade signed original black leather strap is secured with a bifold deployment locking buckle.
The thick black leather strap is in perfect condition showing no stains or blemishes.
This watch has never been worn, tried on a few times perhaps but never used for any length of time. It comes with a useful glow in the dark magnetic compass with signalling mirror and carrying case.
The original black coating on the inner box is breaking down and disintegrating with the slightest touch, but remains original. It comes with the outer box, instructions, open warranty card endorsed by an official Victorinox agent.
15 years ago this watch had a retail price of $2,095.00; around the same as period Tag Heuer watches. The world wasn’t ready for a $2,000.00 plus Swiss Army watches and these high end models didn’t sell too well. Today they are very rare and offer great value as used models if you can find one. This never worn AirBoss chronograph one comes with our 1-year warranty and an estate price of $1,575.00 CAD. Stock #500-00070.
Where will the Canadian diamond industry be in the next few years? We can be proud of our ethically sourced Canadian diamonds. Canadian diamond mines have been producing some of the world’s finest for more than 25 years. With the higher costs involved with mining in the Canadian far north and pricing pressure from infinitely cheaper lab-grown diamond the days of Canadian diamond mines may be numbered.
This short YouTube video by Mel Moss from Canadian diamond wholesale company Regal Imports outlines the current challenges facing the Canadian diamond industry. Our latest estate ring features a beautiful 0.65 carat round brilliant cut Canadian diamond of sparkling SI2-I with a very good to excellent cut.
The centrepiece diamond is low and out of the way secured in a semi-bezel wrap around setting embellished with 61 small round brilliant cut diamonds. 61 tiny accent diamonds are expertly bead set down the shoulders of the engagement and wedding ring.
The small diamonds contribute to an estimated total diamond weight of 1.36 carat. This ring set has been crafted from blushing 14 karat rose gold with a touch of white rhodium enhancement for contrast. The set weighs a substantial 7.2 grams and has no hollowed out or thin sections. Canadian centre diamond has been laser engraved with the image of a maple leaf and a unique serial number identifying its Canadian origin.
It was originally purchased a Canadian jewellery store Ben Moss and looks as if it has never been worn. Measuring a 6 1/2 it can easily be made larger or smaller by up to 2 sizes. The set comes with an 2023 appraisal from Ontario Gemmological Service of London Ontario. It accurately describes the rings, diamonds and quality, although the price of gold has more than doubled since this report was printed in August of 2023. Our estate price for this like new engagement/wedding ring set is $3,180.00 CAD. Stock #101-00609.
From boutique manufacturer Ebel comes their most popular model, the Classic Sport Wave. It’s certainly not a Rolex, Breitling or Tag Heuer; this is a sophisticated design that is above all else comfortable and practical, with a unique luxury look. At 23.5mm diameter it’s made for a woman who isn’t looking for a large “statement” watch. The slim profile stainless steel case measures just 6.8mm thick.
The thin case is partially achieved because this watch doesn’t have a removable back. No caseback means no thick screwed on or snap closed hatch for movement installation and service requirements; instead the super accurate Swiss quartz movement is installed from the front. The bezel, crystal, dial and complete electronic mechanism come out through the front for maintenance.
This ingenious design not only makes the watch thin it also means one fewer rubber gasket to fail. The bezel and its 5 locking screws are all made from highly polished stainless steel while the rest of the watch case has been treated to a flat brushed finish. The Classic Wave in both men’s and woman’s styles are still being made today. The contemporary design of this watch looks practically the same but now is offered in a larger 33mm version that comes with a $4,526.00 price tag. The beautiful natural mother of pearl dial displays a pastel palette of rainbow colours as the watch is moved.
It is further embellished with 10 diamond hour markers and Roman numerals at 12 and 6. The flexible wave link bracelet is one of the defining features of the watch. The segmented design is soft and contours to every wrist shape with a curved and integrated bi-fold buckle.
The polished trim sections are below the surface, protected from becoming scuffed and scratched from use. Our example is in very good condition showing minor scuffs and scratches from wear.
It has been freshly serviced with a new high capacity silver oxide battery. It is running perfectly and comes with our one year Bill Le Boeuf Jewellers warranty. Estate priced at $1,000.00 CAD. Stock 501-00411.

A few simple stars. Amazing how the stylists at Tiffany’s can capture the feel of the 1980s with a three star outline brooch. If you are old enough to remember the 80s you will recognize this style as an iconic symbol of that era. This is a rare brooch that I didn’t know existed until some research revealed its history. The 18 karat yellow gold brooch measures 42mm long and weighs 6.5 grams. The back has been stamped Tiffany & Co. 1986. This piece comes with that special little blue box too. Estate priced at $1,260.00 CAD. Stock #181-00019 e7461.
SOLD
The beauty of the mechanical watch is best displayed in its purest form of simple time keeping with perhaps a calendar display. This watch doesn’t scream exotic, expensive, and complicated but it’s all of those things in subtle stainless steel on a leather strap. Omega has been one of the world’s great watch manufactures since the mid-1800s. They’ve made many millions of watches since then and always with great attention to detail. They produce sophisticated mechanical movements with reliable technology like no other. While not inexpensive, the economy of scale allows Omega watches to compete with Switzerland’s finest at a price point many can afford. The 39 jewel masterpiece housed within the 41mm case is a competent as any from the most exclusive boutique Swiss brands.
A complicated double mainspring barrel setup allows a long 60-hour power reserve while maintaining accuracy levels well under chronometer tolerances. The movement ticks away at an unusual 25,200 cycles per hour, compared to 28,800 cycles for most of Omega’s movements and pretty much the entire watch industry. Independent testing of the Master Chronometer movements goes much further than the standard COSC testing requirements. In short, each movement is tested in various positions while exposed to magnetic fields of 15,000 gauss and subject to extreme temperature variations.
In order to achieve the title of Master Chronometer the movement must keep time within zero to plus 5 seconds per day. Under regular conditions, many owners report an accuracy level of only just a few seconds per week. The beautiful movement is visible through the clear display back. The luxury finishes extend beyond the polished and satin finish case to the soft alligator strap with a locking deployment buckle.
The brown dial has a radial finish centre section with a circular edge containing beautifully faceted Roman numerals. Simple white text with an applied Omega dial completes the understated dial.
This watch was originally purchased through a Canadian authorized Omega agent for Christmas of 2016. It was only occasionally used since then and looks practically unworn. Only a few tiny scuffs can be seen on the stainless steel case. The leather strap also appears practically unworn.
The watch comes complete with the original instruction booklet, 3 cards with a fully endorsed warranty, foam-lined white outer cardboard box, an original wooden inner box, and the plastic product tag showing the serial number and original price of $7,550.00 CAD.
This watch is still available from Omega and can be seen on the corporate website with a current price of $7,900.00 CAD. We are happy to provide the next owner with a complimentary 1-year warranty with purchase. This like-new De Ville Master Chronometer is estate priced at $5,900.00 CAD. Stock #e14603 510-00047.
The popularity of cheap lab-grown diamonds has helped offset skyrocketing gold prices keeping the cost of new jewellery under control. Our vintage estate collection offers far better pricing than anything new plus the benefit of featuring natural diamonds that are typically set into higher quality and heavier settings. This pair of fancy drop earrings are a perfect example of the great value estate jewellery can offer. High quality meets low price with these sparkling drop earrings.
It’s hard to exactly date this vintage design but we feel they are around 50 years old. They were certainly made at a time when gold was trading for 1/10th of what is is selling for today. The illusion navette shaped settings in the halo frame and top section each contain a large single cut diamond with a significant centre round brilliant cut diamond in the centre weighing just shy of 0.30 carats. All 28 natural diamonds used in this glamourous pair of earrings are of SI-H quality. All totaled, the earrings contain an estimated 1.57 carats of natural diamonds.
The multiple jointed sections in each earring allow the separate components to independently swing with the slightest movement resulting in a cascade of sparkling brilliance. Long post backs with upgraded, sturdy friction backs secure each earring. They are in like new condition showing no wear of any kind. Estate priced at $3,100.00 CAD. Stock #151-00337.
The line between watch and jewellery becomes somewhat blurred with the Tag Heuer Link WJF1352. Sure it tells time, has a useful calendar and second hand, but it’s also super shiny with a mother of pearl dial and is trimmed in solid 18 karat yellow gold.
When it comes to pretty and more than capable it’s hard to beat Tag Heuer’s more feminine and thoughtfully designed “Link” series. The look has become iconic to the brand. The basic style goes way back more than 30 years to the original Sports Elegance line from 1987.
Although Tag Heuer have tweaked the shape here and there, the Link is instantly recognizable as successor of the S/el “Sports Elegance. It’s look can only be described as a Tag Heuer. It’s been mimicked by many lesser brands over the years but there can only be one original.
At just under 27mm diameter it is not the largest ladies watch but it certainly isn’t small. The beautiful iridescent white mother of pearl dial and thin bezel make for a watch that looks a bit bigger than the measurement suggests. Refined details set this watch apart from the crowd as the true luxury product it is. The beautiful pastel coloured rainbow mother of pearl dial and premium quality solid 18 karat yellow gold bezel and bracelet details extend around the entire bracelet with an integrated locking buckle.
There isn’t a sharp edge to be found anywhere on the watch. From the curved synthetic sapphire crystal to gently contoured crown guards, it’s a supple exercise in timekeeping comfort. Overall condition is good to very good. The case, bracelet, and buckle show scuffs and scratches associated with the sporting use a Tag Huer is expected to be subjected to.
Keeping excellent time with all functions working as designed courtesy of the high precision Swiss quartz movement. Around 10 years ago when this watch was a current Tag Heuer offering it carried a retail price of $3,100.00 USD. Including a one year Bill Le Boeuf Jewellers warranty and our new custom travel shell, the watch is estate priced at $1,100.00 CAD. Stock 520-00158.
We see our fair share of high quality estate jewellery pass through the estate department on a regular basis. Sometimes we get a very special, premium quality item to feature in our vintage spotlight. This pair of 18 karat white gold ruby and diamond earrings certainly qualify as premium. In this era of $5,400.00 per ounce gold, seeing anything made from 75% pure gold 18 karat is quite uncommon. Seeing a pair of earrings crafted from 11 grams of 18 karat is almost unheard of these days.
The gold content alone in this pair is worth over $1,400.00. The plump oval natural rubies exhibit a rich red colour with a slight purplish hue. In person they appear more red than these pictures illustrate. I like to say, the finest ruby have a colour like red Jell-O or a red Lifesaver candy, and these are not too far from that. The are tightly set in three sections separated with four seams of bead set brilliant cut diamonds providing some contrast and sparkle.
The 80 tiny diamonds are estimated to weigh 0.40 carats and are of SI-HI quality. The half hoop design measures 3/4 of an inch in length. They are thankfully secured by spring loaded “Omega” backs that provide excellent security and distribute the weight across the earlobe better than a simple friction back/post combination.
They are in like new condition looking unworn, there is not even a corner or edge where the white rhodium finish is wearing thin. It isn’t a stretch to say that duplicating this set would cost more than $10,000.00 if you wanted to create something of the same quality. This spectacular pair of estate ruby and diamond earrings is estate priced at $4,000.00 CAD. Stock #211-00236.
The Figaro link for chains and bracelets continues to be a popular choice in both new and estate. They offer a little more visual interest with smaller and large link patterns compared to a uniform size curb link style. This one also showcases a bright cut flat edge that catches the light. Solid construction in upgraded 14 karat yellow gold results in a finished weight of well over half an ounce (16.6 grams). As I’m typing this posting (Dec 18th 2024), gold is touching $3,762.00 CAD per ounce. At that price this bracelet contains over $1,171.00 in just its gold content. The bracelet measures 8 1/2 inches long, 6.5mm wide, and is quite thick at 2.0mm.
It is secured by an upgraded riveted lobster clasp, most are simply pinched together. We’ve seen the spring loaded sections of pinched clasps slide out occasionally; this type can’t slide out offering better security.
One of our goldsmiths can shorten in for the perfect custom fit. It is suitable for a man or woman. Estate priced at $1,680.00 CAD. Stock 441-00316.
SOLD
Unless you follow Omega’s product line very closely, chances are you’ve never seen this example of the flagship Omega model, the Constellation Double Eagle chronograph 1519.80.00. The Double Eagle was named after that exceedingly rare feat of scoring three strokes under par on a single hole. It’s finding the cup on your second shot on a par 5 or a hold in one on a par 4.
Released in 2003 at the European Masters Golf Tournament, the model featured a more sporting and modern look to the classic lines of the Constellation that has always been considered a dressier design. The larger 41mm case with black bezel and “reverse panda” dial certainly gave it the sporty look but still retained the detail and elements of Constellations going back to the 1982 Manhattan. Classy exclusive looks with sporty features made it the perfect match to be associated with the world of professional golf.
It was a relatively short lived, replaced with updated models that looked somewhat similar but without a chronograph/tachymeter scale. For the gentleman sportsman/collector this is a very striking watch for people understand the halo model within the Omega lineup. It was an expensive watch back when this one was made in 2006.
It had a Canadian retail price of $6,200.00; while the ever popular Speedmaster Professional Moonwatch was priced at just $3,700.00 at the time. This Double Eagle is in completely original condition and is a one owner example. It was sold new by Bill Le Boeuf Jewellers to a long time customer of ours. The automatic winding Co-Axial calibre 3313 is visible through the display back showing the excellent finish that Omega is know for.
It has an autonomy of 52 hours and is independently certified to operate within chronometer accuracy levels. The 12 hour chronograph with tachymeter scale go hand in hand with many sports activities, the discreet calendar at 6:00 o’clock adds some extra utility.
It remains in original unpolished condition, displaying only light scratches on some bracelet links.
The watch is operation like new with all functions operation as designed. It is a super tricky watch to refinish properly, we’re happy to say this one hasn’t been messed with in any way.
The watch watch does not come with its original box or documents. Estate priced at $4,600.00 CAD. Stock #510-00205.
SOLD
We’re seeing plenty of “alternative” materials for use in wedding bands these days. The options for rings include, tungsten, cobalt, stainless steel, titanium, ceramic, various forms of carbon, and rubber; you can even have a wedding ring tattooed on your finger. Call us traditional but all these fill-ins leave us a little cold, there is a special feeling about a quality wedding ring made from high karat gold or platinum. Tungsten comes close in the “feel” of weighty gold and platinum but it can’t be sized and will never develop the soft grey/white patina of platinum and it will certainly never possess the rich yellow glow of 18 karat yellow gold.
Brands like Cartier and Tiffany have always offered plain wedding rings to those who cherish the classic looks of a rounded profile wedding ring. Our vintage spotlight for today is this iconic 4mm round dome wedding ring, made in a finger size 9. It made not be very wide but with a generous height of 2.2mm and crafted from 95% pure platinum, its 9.2 grams of weight will surprise you.
It’s in very good condition and has been freshly polished to look almost like new. This model is called the 1895 paying tribute to the year Cartier first introduced their solitaire. This versatile ring measures a finger size 9 and can be adjusted up or down as required. It is still shown on the Cartier website where is carries a retail price of $3,050.00. Platinum is one of the most durable metals when it comes to designs like this, we expect this ring will last many generations. It may get scratched up and display impact marks but the metal itself will remain intact showing hardly any loss of material over the decades. Our price for this wedding ring is half of its replacement cost, estate priced at $1,525.00 CAD. Stock #401-00299.
Sale pending D.P.
When the Tudor North Flag debuted, it was a game changer for the brand that has always lived in the shadows of its parent company Rolex. I can’t believe it has been more than 10 years since the Tudor in-house developed MT5621 movement debuted in the North Flag. Perhaps it was by necessity that Tudor was forced to develop their our mechanisms. Rival company The Swatch Group had supplied movements for Tudor from their ETA movement division for decades.
There are obvious commercial disadvantages when the competition supplies the single most important component for your products. With the vast resources of parent company Rolex behind them, Tudor created a movement without rivals at this price point. This is the first certified chronometer from Tudor. The chronometer designation is the Swiss benchmark for accuracy, usually associated with much more expensive watches than what Tudor usually offers. When initially offered this watch had a Canadian retail price of only $3,980.00 CAD. For under $4,000.00 there isn’t another watch with this technology. The 28 jewel MT5621 mechanism offers a long 70-hour power reserve, a silicon hairspring that is unaffected by strong magnetic fields, a power reserve display, a 31-day calendar, and a beautiful pierced rotor that displays sandblasted plates and bridges.
The movement is both supremely functional and pretty to look at too. Tudor must clearly be proud of their achievement as they have also equipped the North Flag with a transparent display case-back, a feature you normally never see with Rolex/Tudor products. The threaded case-back and threaded crown allow a water resistance rating of 100 meters.
The 40mm case wears a little bigger than the size suggests, it lacks a thick bezel that makes the matt finish dial appear a little larger. The dial is nicely balanced with large luminous hour markers (Arabic 12/6), a date display in the 3:00 position, and the 70-hour power reserve display at 9:00.
This example is a very early model as it was delivered to the original owner in the fall of 2015. It comes fully documented with the original bill of sale, fully endorsed warranty card, instructions, document holder, inner/outer boxes, and a white cardboard sleeve. The watch comes with a high quality aftermarket TSS black leather strap with yellow stitching than blends well with the yellow accents on the dial.
This watch may be 10 old but looks like it’s only a year old. The previous owner was very careful wearing this was in rotation with others in his collection. It remains in its original condition, it has not been refinished or polished in any way. There are minor scuffs, scratches, and minor on the bracelet/buckle, but the case is in very good condition despite its sharp lug edges.
Bill Le Boeuf Jewellers is happy to include a complimentary 1-year warranty for the next owner. This watch is estate priced at $4,500.00 CAD. Stock #505-00266.
Another rare and interesting Tudor Oyster-Prince. Determining an accurate age for early Tudor watches is somewhat difficult. After researching this one we feel it could possibly be as early as 1952 and as late as 1955 according to the clearly visible serial number.
Rolex doesn’t release such information but we are confident this one is of early/mid 1950s construction. We like this one because of the rare engine turned/faceted bezel.
Most Tudor Oyster-Prince models came with just a simple smooth bezel. We also feel this one hasn’t been polished before as the edges are sharp and crisp, but the flat surfaces display numerous scratches from decades of wear.
Our master watchmaker performed a full overhaul to the 17 jewel automatic movement in October 2023 and has it running very well for a watch approaching 70 years of age.
Calibre 390 is the same movement found in some very expensive and collectable Tudor Submariners from the 1950s. We also love the 19mm tapered 12 link Rolex 7835-257 Oyster bracelet on this watch.
While the bracelet isn’t original to the watch, it is a genuine service replacement from Rolex. The buckle is dated from 1970 and still displays the Rolex coronet logo in very good relief.
These bracelets themselves are quite scarce and are usually priced over $1,000.00.
Someone out there has an old Tudor Submariner with a rusty mechanism who’d love to get their hands on a freshly serviced calibre 390.
Parted out the movement and bracelet alone are likely worth more than the entire watch to the right person. We are happy to supply the next owner with a complimentary 1-year warranty. This rare Tudor is estate price at $2,800.00 CAD. Stock #505-00465.
The fashion police may not agree but I like two-tone gold, especially when it has contrasting finishes. This 14 karat white and yellow gold flat band measures 5.5mm wide with a finger size of 6. It could be used as a funky wedding ring or just a cool ring to wear. The wave design is highly polished yellow gold on one side with flat brushed finish white gold on the other. Weighing 4.4 grams the ring is estate priced at $540.00. Stock #401-00105 e7625.
Is this the retro masterpiece you’ve been looking for or a remount candidate? We love its retro 90s looks just the way it is, but we’d be equally happy using any or all of these natural diamonds to create a modern piece of jewellery just for you. Fancy shaped diamonds like this marquise are back in demand just like they were in the 1990s. That giant marquise cut diamond Selena Gomez received as an engagement ring in December 2024 certainly didn’t hurt the interest in alternative diamond shapes.
There are more than enough diamonds in our latest estate ring to duplicate the Selena ring, albeit on a slightly more modest scale. The centrepiece of our ring is a slender marquise with a flattering length to width ratio of 2.1:1. The actual dimensions of this diamond are 10.9mm x 5.2mm making this slim diamond appear far larger than our estimated weight of 1.00 carat.
We have graded this natural diamond a very conservative I1 clarity with a H/I colour. The 18 tapered, graduated, channel set baguette cut diamonds add 0.36 carats with an additional 0.72 carats of round brilliant cut diamonds contributing to our estimated total weight of 2.08 carats. The small accent stones in this textbook example of 90s awesomeness are SI1 to I1 clarity with H/I colour. This is a ring that was made in a different era, a time when gold only cost around $500.00 per ounce. You don’t see many rings today that weigh anywhere near 11 grams and measure 16.3mm like this one.
In fact; just the scrap value of gold in this ring at todays gold price (Sept. 27, 2025) is over $1,100.00. Purchasing just the centre diamond and recycling/reusing the gold is an opportunity and a good buy, but keeping it intact and original represents an outstanding jewellery value.
It measures a finger size 7 and can be adjusted up or down as required. It is in excellent condition showing no wear on the white gold prongs or yellow gold channels. It is estate priced at only $3,250.00 CAD. Stock #101-00587.
SOLD
Vintage looks are popular and when you’ve been around since 1860 there’s a lot of history to draw inspiration from. The Autavia CY2111 is a retro inspired watch that owes much of its style to a watch introduced by Heuer in the late 1960s. 55 years later what’s old is new again with this fitting tribute to the original. From the bracelet and case shape to the left hand crown this watch looks like it could have been on the wrist of a 1960s racing driver. Even the black white and orange dial colours, hands, and hour markers are properly period correct derived. As a concession to modern convenience and durability, new low profile square pusher chronograph controls aren’t as prone to damage as the original round pushers.
A synthetic sapphire crystal replaces the original easily scratched plastic version. Our latest estate example is in 100% original condition showing no signs of polishing or refinishing. There are some scratches on the bracelet and a few small impact marks on the sharper edges, but by and large, it presents very well.
At 43mm wide it is on the large size but it’s not cumbersome. The left hand crown combined with the gently rounded case makes for a surprisingly comfortable watch even for those who don’t have a large wrist. The flat black dial with highly polished, faceted hands and hour markers make for a very easy to read face with some sparkly bling.
The automatic winding movement is working like new after a full overhaul by our master watchmaker. It is keeping great time with the chronograph and calendar functioning as designed. The electronic timing report (Sept. 22, 2025) shows it is running better than expected for a non-chronometer rated movement. The watch also passed our vacuum and pressure testing, reports included.
Bill Le Boeuf Jewellers’ complimentary one-year warranty comes included in the estate price of $4,000.00 CAD. Stock #520-00018.

This posting is for a very good customer who is interested in early 20th century jewellery (especially bracelets). Antique bracelets don’t turn up around here very often, but when they do they always turn heads in our showcase. By modern description this one qualifies as a tennis bracelet but 100 years ago they were simple known as an inline bracelet. This example is quite unusual because if features lighter tone rhodolite garnets. This variety of garnet is less common than the typical dark brownish/red almandine garnets usually seen in modern jewellery. When you see rhodolite garnets they are most often a more saturated purple colour. These ones are a very attractive light pinkish purple.
They are nicely matched in hand made 14 karat white gold settings. It would have been quite a task coming up with 30 nicely matching pink garnets that are graduated in size from 8.0mm x 5.4mm to 4.9mm x 4.0mm. It is an almost impossible to be 100% correct estimating the total gem weight of these exotic garnets, but we’ve calculated it to be approximately 20 carats. Overall condition is very good, the bracelet shows very little wear in the hinged joints and the garnets are scratch free.
The optical properties of garnet make is more reflective than almost any other coloured stone, resulting in a sparkle better than sapphires, rubies, or emeralds. They are reasonably hard, will not fade, and are tough enough for ultrasonic cleaning. The specific gravity of garnet is quite high making this bracelet a little bit heavier than you’d expect, feeling great on the wrist. A plunger clasp is nicely integrated into setting and protected further with a thin safety chain that appears to be made of sterling silver.
This hand made bracelet is a one of a kind item that would be very difficult to duplicate at any price. Our estate price for this antique tennis bracelet is $2,000.00 CAD. Stock #241-00100.
SOLD
The “roulette” moniker refers to the alternating red black date display. Red displays the odd days of the month and black shows even. This was a feature of the original Datejust when it was introduced for the 40th anniversary of Rolex in 1945.
After decades of absence it was only reintroduced on a hand full of Datejusts from the now retired 1162xx series. The red/black display only came with a few dial colours. This unusual and uncommon feature is experiencing some collector interest as they are a little different. The every other day splash of colour is the most apparent with the glossy white dial of our latest previously enjoyed Rolex. The rest of this V series 2009 Rolex comes from the regular playbook. Iconic 18 karat white gold fluted bezel adds a luxury touch the otherwise completely stainless steel watch.
Sporty Oyster bracelet with easy link extension is in great condition showing no measurable sag or stretch.
There are a few scuffs and scratches showing on some of the flat surfaces that can easily be removed by our onsite technicians if you wish. 18 karat white gold hands and hour markers have been specially treated to a luminous pigment that allows time interpretation long after the lights go out.
This is a Canadian delivered watch purchased from our friends at Nash Jewellers in London Ontario. The endorsed authorized agent Rolex warranty card dates from February 2011.
The watch comes complete with the original green box, card holder, instructions, booklet and plastic chronometer hang tag. Bill Le Boeuf Jewellers is pleased to provide the new owner with a complimentary 1 year warranty with purchase. Estate priced at $11,000.00 CAD. Stock #505-00631.
If there is one design era that is almost universally admired it has to be the Art Deco period from the 1920s and 30s. More times than not when this style of Art Deco diamond ring comes to us, it has been worn by two or three generations and is too worn out for anyone else. Delicate filigree 18 karat construction of these rings is quite durable but doesn’t last forever.
Continuous wear against a wedding ring can undercut the thin wire galleries. Repeated size adjustments up and down can stress the thin shanks causing fine cracks to develop over the decades. While this ring shows some softening of the antique milgrain and filigree it retains much of its originality and intricate detail. It doesn’t appear to have ever been sized before, and there is no solder contamination from previous repairs.
It may already be over 100 years old, but this example has many more decades ahead of it if worn with some degree of consciousness. At just shy of 2.5 grams it isn’t very heavy but these old 18 karat white gold alloys are quite hard and stand up well over the years. Bead set at the centre of the design is the original old European cut diamond that has been calculated to weigh 0.28 carats of SI1-I quality.
Compared to the giant lab-grown diamonds we’re selling these days, this one is quite petite, but 100 years ago hardly anyone had a diamond of any size, likely only had a thin gold wedding ring. This would have been considered pretty significant. Over 100 later this antique ring looks perfectly proportioned and beautiful. For someone looking for something different or anyone who loves these old engagement rings, this is great example of classic Art Deco. It is estate priced at $1,020.00 CAD. Stock #131-00235.
SOLD
If it ain’t broke, don’t fix it. The basic Rolex Datejust formula hasn’t changed in over 80 years. Coin edge fluted bezel, Oyster case, and champagne dial are still some of the most popular combinations, just as they were when the model was introduced in 1945.
This example is a model 16013 and dates from 1978 according to the serial number engraved between the 6:00 o’clock lugs.
At 47 years old this watch is now a vintage collectible. It may be over 4 decades old, but it looks like one that is far younger. Some Rolex watches see only occasional use, so good condition, older examples are not that uncommon. Some light scuffs and scratches can be seen on the plastic crystal, 18 karat gold bezel, and stainless steel case, but otherwise the watch looks almost like new. Only the savvy connoisseur would notice the tall plastic crystal that gives away this watches’ approximate age.
A true Rolex aficionado may take it a step further and recognize the unusual dial with a connected minute track and raised hour markers. The raised hour markers allow Rolex’ watchmakers to secure the solid 18 karat gold markers over the perfected placed domed tritium plots. These markers are seldom seen with the single rail minute track.
With with vintage watches, it’s all about the dial; and this one is perfect. There is not the slightest stain or blemish to the champagne sunburst finish. Every tritium hour plot is also perfect showing no parchment patina with perfectly matching 18 karat yellow gold hands.
Very good overall condition and ready to wear for the next 5 decades of reliable service. The 18 karat gold fluted bezel is instantly associated with the Datejust and Day-Date is in great condition displaying crisp sharp edges.
The watch is running well and keeping good time. Inside the 100 meter water-resistant Oyster case is the notable 27 jewel Rolex calibre 3035. This was the first truly modern Rolex movement, introducing the companies first high beat (28,800 cycles per hour) mechanism, an increased 50-hour power reserve, and the first quickset calendar.
These reliable movements remained in production for 12 years. They also powered the Submariner, Sea-Dweller, and GMT-Master (in modified form).
This watch was treated to a Rolex service in March of 2021 and comes with the service warranty card along with a Rolex travel pouch.
Inside the case back shows two previous service records that appear to also be preformed by the official Rolex service centre in Toronto.
This was a presentation gift to commemorate one million dollars in sales.
A million dollars is a lot of money, but it was a whole lot more significant 47 years ago. In the late 70s a million dollars would have bought 10 really nice houses in Barrie. Included with the purchase is a one-year Bill Le Boeuf Jewellers warranty and a never worn Hirsch brown leather strap (the watch does not come with an original Rolex bracelet). The engraving on the case back can easily be removed but we like to keep these collectible watches original as it’s part of their story. Rolex still manufacture a 36mm Datejust that looks almost identical to this one on a gold and stainless steel bracelet. The current version of this iconic watch 126233 carries a retail price of $18,200.00 at your local Rolex boutique. Our late 1970s vintage example is estate priced at $6,000.00 CAD. Stock #505-00630.
We’ve been exclusive agents for Simon G Jewellery in the Barrie area for close to 20 years. In almost 2 decades we haven’t seen a boutique manufacturer with better styles, finer quality, and more innovative setting techniques than our top brand Simon G. Our latest estate ring is a classic Simon G creation from their “Mosaic” collection. Naturally it has been hand crafted using premium 18 karat white and rose gold with mother nature sourced diamonds. While most Simon G jewellery showcases white diamonds, occasionally they produce treasures with natural pink diamonds from the Argyle mines in Australia.
The little accent stones form a subtle contrasting blushing pink frame surrounding the exceptional white diamonds in the centre. The master jewellers at Simon G spend countless hours perfecting the art of diamond setting, allowing them to assemble the 29 centre diamonds so closely that they appear to be one large stone.
More white diamonds tightly set down the forked shoulders complete the fully dressed look distinguishing a Simon G from the rest of the crowd. The white diamond are a minimum VS clarity, G colour, with an excellent cut. Total diamond weight comes in at a little over 3/4 of a carat. This ring is in like new condition showing only minor wear to the rhodium plating on the bottom of the shank.
This is current ring in the collection and can be seen on Simon G website with a retail price of $7,182.00 CAD. As a like new estate offering, this ring is priced at $4,310.00 CAD. Stock #101-00621.

Lab-grown diamond are here and they are a huge part of the jewellery industry. They offer the same look as a natural, last just as long but cost a tiny fraction of a natural mother nature diamond. It was only a matter of time before they started to show up on the secondary and estate market. This 4.03 carat has International Gemological Institute that was produced just last year. It isn’t old but it is previously owned and is now looking for a new home in a custom designed piece of jewellery for you.
It’s big at just over 4 carat but not so big that is isn’t believable. It is the perfect size for an engagement ring or simple solitaire pendant. Most modern lab-grown diamonds are produced and cut to very high standard, this one is no exception. The clarity is a very good VS1, with an excellent F colour. The overall cut is described as ideal with excellent polish and symmetry. According to our database profiling over 600,000 earth-grown diamonds, the cost of a natural diamond of this quality with a GIA report is over $160,000.00 CAD!!! Yes lab-grown diamond are that inexpensive.
In larger sizes lab-grown cost less than 1% of the natural equivalent. What do you have in mind for something like this? Let us explore all the possibilities for your next piece of jewellery. This diamond is in perfect condition and comes with the IGI report for the estate price of $1,320.00 CAD. Stock #190-00337.
SOLD
It was bound to happen and here it is; our first example of a mixed natural diamond/lab-grown diamond ring. This was once an all natural diamond ring that contained a 2.02 carat internally flawless, D colour natural diamond with a GIA report.
We had a customer looking for such a diamond but they wanted a different style ring. We sold the centre diamond and made them a beautiful solitaire to showcase the exceptional natural oval diamond. This left us classic design, featuring tapered baguette shoulder natural diamonds of excellent VS-F quality, in a premium 18 karat white gold ring. Rather than spending $40,000.00 trying to replace the 2.02ct. IF-D GIA oval, we selected this 1.74 carat lab-grown oval diamond that fit nicely in the empty setting for only $800.00!
The new diamond comes with an IGI report describing the high quality of the lab-grown centre oval diamond as VVS2 clarity with a G colour.
Lab-grown diamonds offer an excellent alternative to those looking for a big look on a more modest budget. This ring offer premium quality 18 karat gold (4.5 grams net weight), 2 x 0.22ct. VS-F natural diamonds in a ring that costs a tiny fraction of the completely natural equivalent. The ring has was hardly worn, never polished and still retains most of the rhodium plating.
It measures a size 6 and can be adjusted up or down as required. New lab-grown oval diamond plus a premium quality estate ring with natural accent diamonds equals great value value. Estate priced at $2,275.00 CAD. Stock #101-00641.
The 1930s saw the tail end of the Art Deco movement and the beginning of innovation in platinum. The invention of the oxyacetylene torch in 1903 with its impressive heat output, allowed jewellers to manipulate platinum in ways they’d never been able to before. Platinum being so much tougher than gold meant jewellers were able to make pieces that were unbelievably delicate and airy without compromising strength. Meaning of course that pieces could be made much larger without much additional cost, which came in handy during the Great Depression of the 1930s. Brooches like ours (measuring 59.0mm long x 20.4mm wide) became the height of fashion and were used to add form and adornment to the loose, flowing dresses of the decade. The feature of our 4.2 gram platinum and 14 karat white gold piece is a bright 0.10 carat old European cut diamond shouldered by top quality, custom cut sapphires. Estate price for this estate brooch $903.00 CAD. Stock #181-00016 e10133.
SOLD
Few watches can define the look of the brand like Tag Heuer’s S/el or Sports Elegance. For over 30 years the S/el was the softer looking of the mostly pure sport creations from Tag Heuer. Today they are simply known as the “Link”, paying homage to the S shaped bracelet component that is really the single most unique characteristic. Smooth and easy to wear has always been the attraction. Even the way the links are constructed is innovative. Each link section appears solid, without a visible rivet connecting side to side and each link to the next. Unless you know the trick you’d swear these links are not adjustable for different wrist sizes.
The ultra clean rivetless look adds a sophisticated level of finish without compare. A low profile 28.5mm case is perfect for most ladies wrists, suitable for the woman looking for an easy to read fun watch but not over the top in proportions or price. An ultra reliable Swiss made quartz movement with calendar and second hand add some utility to the design. Threaded crown/case back, rotating timer bezel and locking buckle are features this dressy model retains alongside its pure sport siblings. This example model number WG1322-2 is in good condition for a watch manufactured in the 1990s.
Most of areas that typically show wear did until we polished away most of the worn gold plated sections. The coin edged bezel and bracelet links were polished to a mirror finish. Only the very difficult to reach sections retain some of the original gold plating. The result is a watch that Tag-Heuer never really produced but looks great with a retro flavor. The exception to our polishing is the factory threaded crown that looks and operates like new.
It was likely replaced at some point in the past. Rotating bezel, locking buckle, date feature are all operating as designed and the watch is keeping perfect time.
The original silver/white tritium dial and hands are in excellent condition except the luminous dot in the seconds hand is missing.
There is not a stain or blemish of any kind on the dial. Including a one year Bill Le Boeuf Jewellers warranty this 28 year old old Tag Heuer time capsule is estate priced at $600.00 CAD. Stock #520-0015
Something for everyone has always been our goal and our estate offerings allow us the flexibility to realize that goal. Where else would you come across a diamond cross of this magnitude? At 8.0cm by 4.8cm it is one of the largest we’ve had and weighs in at an appropriately hefty 33.6 grams. The white gold cross is hand set with 128 round brilliant and round single cut diamonds all of I2-J quality. They come together to equal an estimated total diamond weight of 2.00 carat. They extend onto the flexible bail ready to fit over almost any chain as its opening measures 17.0mm by 8.7mm. This item has been here for a while quietly becoming more valuable day by day as the price of gold climbs to new highs almost every day. As of this update (Sept. 16th. 2025) the price of gold closed at a new record of $5,076.00 CAD per ounce. At that price, this item contains $2,270.00 in just the recyclable gold content not to mention the value of the diamonds. If no one realizes the incredible value of this diamond cross, we’ll end up recycling it very soon. The wholesale replacement cost of this item is around 2.5 times our estate price of only $2,328.00 CAD. Stock #161-00098 e13341.
SOLD
A gold Mexican two and a half Peso coin from the year World War II ended; incidentally, Mexico was very vocal in encouraging their southern neighbors to support the Allies after they joined the fighting in 1942. The coin has been framed with white gold and diamonds, setting off the rich warmth of its 90% gold content.
The 17.68mm x 17.71mm ring top features 0.20 carats total weight of I1-IJ round brilliant cut diamonds. The rest of the ring is understated 14 karat yellow gold in a finger size 7 with some room to adjust. Estate price is $1,498.00 CAD. Stock #116-00050.
Watches made from precious metals are the current trend among the world’s top brands. Companies like Omega, Breitling, and Rolex are showcasing some very expensive watches crafted from gold and platinum. Even with gold prices approaching $3,700.00 U.S. per ounce and climbing (Sept. 16, 2025), these brands aren’t afraid to showcase new models. Luxury goods have weathered well since covid and even increased in value over the past few years. Every time a solid gold watch turns up around here we are impressed by the value they offer when priced by the gram. This very rare Omega Symbol from the mid-80s is occasionally seen in all stainless steel and two-tone, but virtually never in all 18-karat gold. The classic tone-on-tone champagne dial with rich yellow gold is a look that is always in style and neutral enough the blend with any outfit.
This slim line watch measures an easy to wear 32mm in diameter and ultra-thin 5.5mm in height.
The 6-jewel Swiss-made quartz movement displays the time with 2 simple stick hands. It is running flawlessly and keeping excellent time.
A discreet calendar adds some additional function and utility. When we removed the movement, stem, crown, case back gasket, and other non-gold elements (leaving just the sapphire crystal) we were impressed by its 83.5-gram weight.
With gold prices today (Oct. 3, 2025) at $5,422.00 Canadian, this watch contains over $10,700.00 in just precious metal. You’d have a hard time finding a simple, new, 18-karat gold chain or basic wedding band priced anywhere near our estate price of $131.75 per gram. Of course, this watch is so much more than a simple one-piece casting or mass-produced, machine-made, jewellery item. It was constructed from dozens of specific components all working together to create a beautiful piece of jewellery that also happens to tell time. It is running great and keeping excellent time. The sapphire crystal is scratch free and offers perfect optical properties for easy time interpretation. Aside from giving the case and bracelet a light surface polish, ultrasonic cleaning, and a fresh battery the watch needed no service.
We’re happy to provide a complimentary 1-year warranty for the new owner. While Omega no longer produces this model, they make a larger 39mm and heavier (232 gram) Constellation. The contemporary model is powered by a far heavier automatic winding mechanical mechanism and is priced at $57,000.00 CAD. We’d estimate the value of gold in this modern example would be around $25,500.00 at the current gold values. We are happy to include a complimentary 1-year warranty on this slick retro Omega for the next owner. This rare Omega is estate priced at $11,000.00 CAD. Stock number #510-00107.
And now for something completely different. We’ve never been known for our selection of fine furniture, but this little coffee table definitely belongs among our vintage and estate treasures. This coffee table is more than worthy to be in our estate collection as it contains 136.35 troy ounces of sterling silver (over 9.3 pounds). This unusual curiosity was produced by the Franklin Mint from 1974 through 1976. The table stands a little over 2 feet tall by 22 inches wide. Contained in 2 pull-out drawers under the glass are the flags of the United Nations countries as they were in 1974.
This is a snapshot of world political history cast in high-quality 925 sterling silver ingots. A few of the 135 countries represented in this collection no longer exist today. According to the Franklin Mint website, each silver flag ingot cost $9.50 in 1974, the entire set cost $1,282.50 USD more than 50 years ago. These sets are quite rare as many of the 7731 produced were melted down just a few years later when the price of silver spiked from just a few dollars per ounce to almost $50.00 CAD in 1980.
Finding a complete set without missing components in excellent condition is almost impossible. The set comes with its original hardcover book outlining the symbolism and meanings of each country’s flag.
History collectors and those who recognize the value of silver may have an interest in this rare item. The average weight of each medallion is over one troy ounce and is 92.5% fine silver. At today’s silver price (October 9, 2025) the recyclable silver content alone in this set is over $8,700.00 CAD. The complete collection including the table and book is estate priced at $9,570.00 CAD. Stock #913-00064.
Chocolate and strawberries are luxurious treat when your sweet tooth gets the better of and you. The combination works great when it comes to something like this diamond dinner ring. The centre row of natural “chocolate” diamonds are set into blushing strawberry rose gold.
The flattering combination is framed on either side by a row of natural white diamonds bead set in 14 karat white gold. The gold used in this ring was exclusively sourced in Canada. The maple leaf in a circle stamp is your guarantee of Canadian gold.
The ring was manufactured by Corona Jewellery of Toronto. It measures a finger size 7 and weighs in just shy of 5 grams. All totalled the 61 round brilliant cut diamonds weigh at estimated 1.00 carat in total. The chocolate diamonds are of SI2 average clarity and the traditional white diamonds are of I1-HI quality. Showing only wear in the form of rhodium plating wearing off the shank bottom, this ring appears in like new condition. It is estate priced at $1,500.00 CAD. Stock #131-00260.
The legend of the Fujistubo (barnacle) goes something like this. In 1977 an automatic Citizen Challenge diver’s watch was lost to the Pacific ocean in Australia, seven years later it was found on a beach covered in barnacles. After the arthropods were chipped away from the case it was discovered the watch was still functional. A saltwater ocean beach is very hostile environment for any metallic object to survive, let alone a mechanical watch containing many delicate ferrous metal parts. Even a small amount of saltwater inside a mechanical watch can completely destroy it within a few days. Just this week we saw a Rolex Datejust rusted solid from saltwater; the only option for repair was a completely new movement costing over $5,000.00.
Our latest estate watch is this 2025 Citizen Promaster Diver NB6021 made from Citizen “Super Titanium”. This watch was inspired by the Citizen diver models from the 1970s. Is is powered by Citizen calibre 9051 24 jewel automatic winding mechanism. It has a industry standard 42 hour power reserve with accuracy expectations of around 10 seconds per day. It is a rugged performer with shock protection and a fast 28,800 beat per hour frequency. The lightweight case with soft rubber strap makes for a very comfortable timepiece weighing just 70 grams!
Low on price but high on value, this watch comes with top of the line features found on much more expensive brands. The thick lab-grown sapphire crystal is ultra hard and made with an inner curve and bevelled edge providing excellent optics and an interesting visual effect of splitting the ends of hour markers (see the first picture and glowing image).
Of course it has the diver bezel one way bezel indexed for 60 minutes. A threaded crown and case back insure a water resistance rating of 200 meters. Bright luminous pigment on the hands and markers glow as well as anything on the market.
A handy calendar adds some extra utility to this ultra functional diver watch. This watch was sold new by us in April 2025 and only worn a few times, let’s call it a demo model.
It will be covered by the balance of the factory 5 year warranty. It comes with a no charge accessory nylon NATO elastic strap /buckle, and good quality brown leather strap (never used). All packaging and documents are included with purchase. This watch has a retail price of $1,195.00. Our demo model is priced at $717.00. Stock #500-00316.
A watch doesn’t need to be massive to make a statement or leave an impression. Many contemporary sport watches are just too big for people with smaller wrists; diameters of 45mm and larger can be awkward and cumbersome for the average size arm. This one measures a comfortable 39mm making it suitable for the more slender wrist.
Breitling’s Chronomat K13352 in rich 18-karat yellow gold (115 grams gross weight) is sporty by nature but can be worn for dressy occasions too. The beautiful black face with champagne register dials is a striking combination. The smaller rounded crown and control buttons don’t dig into the back of your hand.
Breitling is known for their large sporty chronograph watches. Although this watch is smaller in size it doesn’t lack the features you’d expect from a luxury Swiss watch. The two-tone black/champagne panda dial makes chronograph interpretation very easy. Luminous hour markers and hands allow for time reference in any lighting situation. A chapter ring tachymeter scale on the dial allows units per hour calculations.
The one-way ratcheting bezel adds an additional 60-minute timer capability independent of the 12-hour chronograph. Calendar, continuous seconds hand, threaded crown/case back, curved synthetic sapphire crystal (with anti-reflective coating) and certified chronometer automatic movement round off this watches attributes. This watch dates from around the turn of the 21st. century and remains in its original unpolished condition.
It looks almost like new old stock, showing no major scratches or dings anywhere on the case, bezel, or case back. Attached to the watch is a classy black crocodile leather strap with a signed 18-karat yellow gold buckle. The premium quality strap is original to the watch and is also in like new condition, without any stains or blemishes.
Included with the watch is a Breitling inner/outer box with an instruction booklet, warranty booklet, chronometer certificate, and a complimentary one-year Bill Le Boeuf Jewellers warranty. The black-on-black strap/dial combination is about as dressy as you can get for a sports watch. The standard 20mm lug span allows easy strap substitution if you’d like to make a more casual statement with a brown strap. It’s amazing how a simple strap substitution gives the watch an entirely different personality. Estate priced at $11,300.00 CAD. Stock #515-00077.

Gold pushed past $5,000.00 per ounce Canadian earlier this week on September 8th for the first time in history. This is just another new high for gold as it continues its revaluation process amidst a world in turmoil. The trend for higher gold and silver prices looks to have momentum and move higher still. Surging precious metal pricing doesn’t mean there isn’t opportunity for good value if you’re buying jewellery. Our latest estate chain isn’t cheap but it does demonstrate excellent value once you learn how to recognize it.
It is made from solid links of 10 karat yellow gold (41.6% purity) and weighs 28.5 grams. At todays gold price (Oct. 9th 2025), this necklace contains $2,130.00 in just the recyclable gold content along with around $30.00 worth of fine silver alloy. We are selling this chain at only 33% over the value just the recyclable metal content it was made from. This price is below the wholesale cost to manufacture such a high quality necklace.
It was made in Italy by Uno-A-Erre, one of the worlds finest manufactures of gold chain. The oversized lobster clasp has been private labelled O.P. Orlandini.
The necklace measures 4.5mm wide and 19.5 inches in total length. It is more than heavy enough to suspend any pendant or can be worn alone as a statement piece. It is in like new condition and estate priced at just $2,595.00 CAD. Stock #431-00888.
It’s no wonder lab-grown diamond are so popular given the price advantage they have over natural diamonds. Depending the size and quality, lab-grown diamonds can cost 98% less than comparable natural earth mined diamonds. The ridiculous price discrepancy is something many stores promoting lab-grown fail to mention. If you’re considering a lab-grown diamond, do yourself a favor and shop around. This diamond ring set contains no lab-grown diamonds, they have not been heat treated to alter colour, and no clarity enhancement. They are 100% natural in every way.
The centre stone weighs 1.10 carats measuring 6.6mm in diameter. The clarity is SI1, with a warmish MN colour, and a very good with a tiny table facet encouraging more dispersion. The warm MN colour is controlled quite well in the all rose gold setting. This type of colour range is never seen in modern lab-grown diamonds. The rings are preowned but have never been worn, and are in perfect condition. Solid construction with thin shanks of just 1.6mm width for a modern delicate look. Running down both shoulders of the rings are 47 small round brilliant cut natural diamonds of SI-GH quality.
The rings measure a size 8 and can be adjust up or down as required. We’ve seen many examples of lab-grown diamond rings like these selling for similar prices. With this set you get 100% natural earth mined diamonds for the estate price of just $3,826.00 CAD. Stock #101-00626 & 121-00240.
Destined to be a classic from the moment it was introduced in 1945. Today, this watch is still a best seller for Rolex. From the 28mm ladies to the 41mm over sized gents model. The Oyster Datejust has proven itself as the world’s choice when it comes to time keeping with style and class under any situation. Our latest estate watch is the most versatile 36mm size.
Originally this size was strictly the domain of men but today many women love wearing this manageable size as a do it all design that offers more legibility than the smaller versions. Rolex know a thing or two about who there demographic is, as they no longer offer the small 26mm Datejust. The typical Rolex client is likely someone approaching that age when eye glasses become part of the wardrobe. Rolex have answered this requirement with slightly larger case sizes, thicker hands and hour markers on many Datejust models. The hands and markers also now receive much more luminous material offering great contrast during the day and improved legibility in low and no light situations.
Our latest Datejust 116233 dates from 2005 according to the D series serial number. If you’re looking for a two-tone 36mm Datejust, this is the one want for a number of reasons. It comes complete with a recent (Feb. 2025) factory service receipt and travel pouch.
We didn’t open the case back to be sure but we’re pretty confident this was the first service given to the 20 year old Rolex. The interesting two-tone dial is known in Rolex circles as the Tuxedo. It is very subtle, adding a new dimension to the classic look. This dial is quite rare and no longer offered. The “roulette” date display alternates with red text on odd days and black on the even days.
More than just an interesting quirk, the alternating red/black text allow older eyes to determine dates that can look almost the same, as long as you remember red for odd days and black for even days. As an example, the 28th of the month and the 29th would look almost identical if both were black. The final feature that makes this watch the 36mm version to have is the Crownclasp.
The clever buckle integrates the coronet release trigger to the bracelet link pattern rather than a large flat section covering inner hinged parts. For a 36mm size, only model 116233 featured this seamless buckle design from 2004 until it was retired in 2018.
Many Rolex customers miss this clasp design and can’t understand why Rolex decided to get rid of it on the newer series of 36mm Datejust. The iconic solid 18 karat fluted bezel is still crisp and sharp, twinkling with even the slightest movement.
The 24 link 18 karat and steel jubilee bracelet is in excellent condition showing only a tiny amount of sag and no stretch.is still in place.
Rolex still produce a watch that looks almost identical to this with a slightly different model number 126233. The current version comes with a suggested retail price of $18,200 CAD, but sadly you can’t get it with the Tuxedo dial, red/black Roulette date display, or the integrated Crownclasp. Including the balance of the Rolex two-year service warranty, this excellent condition Datejust is priced more than 36% less than its replacement value at $11,500.00 CAD. Stock #505-00605.
SOLD
When a regular Submariner just isn’t quite up to the task because it’s only watertight to 1000 feet, you need a Sea-Dweller. While it looks almost identical to a garden variety Submariner, it’s actually quite different. The first thing you notice is the absence of a date magnifier over the calendar. The synthetic crystal is much thicker than the standard Submariner, as is the stainless steel case which enables the watch a water resistance rating of an amazing 4000 feet.
Located on the 9:00 case edge is a Helium escape valve, something the ordinary Submariner lacks. If you’re living in a pressurized diving bell breathing a mixture of oxygen and helium, your watch will need this escape valve to bleed off the accumulated helium gas as you decompress.
This example was manufactured around 2005 according to the “D” serial number. The watch has been worn but worn responsibly. There are no significant areas of wear. The full length Oyster bracelet shows little sag and no stretch.
Sea-Dwellers of this era were the most qualified of all Rolex watches and are far rarer than Submariners of the same era. They are the most specialized sports Rolex model.
You couldn’t get them with fancy diamond dials or with gold trim, they only come in all business stainless steel with a jet black glossy dial. We don’t have Sea-Dwellers very often so we thought it would be fun to compare it to a Submariner of the era.
The bezel on the SD measures 39.5mm in diameter while the Submariner measures 40.1mm. The case of the SD is 14.6mm thick and the Sub measures just 12.9mm.
The SD weighs 87.3 grams (head only), Sub weighs 74.3 grams. Sea-Dwellers are the bulldog of the Rolex line; compact, tuff, and they have a bit of an attitude. This watch lacks its original paperwork box but it does come with some Sea-Dweller exclusive accessories. The never installed extra bracelet extension link is accounted for, as is the Buehlmann dive table charts and travel wallet.
This most purposeful of any Rolex is working great, keeping excellent time, and comes with a Bill Le Boeuf Jewellers 1-year warranty. Estate priced at $11,500.00 CAD. Stock #505-00566.
SOLD
We’re not usually sellers of silver bullion at Bill Le Boeuf Jewellers. Over the past few years we’ve sold very little but bought almost every ounce offered to us. Every once in a while we like to let go some of go. These attractive 10 ounce and 1 kilo bars are all priced at just their silver content value plus 5% with no minimum purchase requirements. Most bullion dealers require minimum purchase of 100 ounces or more to be close to this price depending on the brand. North Texas Refinery, Argentia, Asahi, Sunshine, A-Mark, GS Gold Stock, and Pamp Suisse, poured and milled bars all priced exactly the same at spot plus 7%. We may have a few other brands available in other sizes. Fine 999 and 9999 silver is very hard to find at reasonable prices and we are not always sellers of such material. Fine gold and fine silver is not applicable to any form of sales tax in Canada. The Canadian Revenue Agency deems the sale of fine bullion a financial transaction therefor not subject to Provincial or Federal sales tax. With all the turmoil happening in the world right now, everyone should turn a little extra cash into some form of precious metal. These bars are being sold the current spot price plus 5%. No sales tax added. Please add 2% to cover credit card fees if not paying by cash, debit, or e-Transfer. We may have other single and smaller multi ounce miscellaneous packages available all for sale at spot plus 5%.
As of this posting the maple leaf coins have already been sold. The “spot” price for silver can be seen here; add 5% for a cash, debit, or e-Transfer purchase and that’s the total price. Credit card purchase subject an additional 2% fee to cover costs. 
This 17 1/4 inch long necklace weighs in at a luxurious 53.4 grams, ensuring you’ll never forget you’re wearing it! Crafted from top quality 18 karat yellow and white gold, this piece features 46 individually hinged links, forming a flexible and dynamic structure that molds gracefully to the contours of the wearer.
Adding a touch of sparkle are 22 round brilliant-cut diamonds, with a combined weight of 2.00 carats with SI-I1-I quality.
The meticulous flush-setting of these diamonds not only ensures a sleek and seamless look but also accentuates the brilliance of each stone.
The necklace is adorned with a hidden box catch, providing both security and a streamlined aesthetic. Estate price $9,000.00 CAD. Stock #161-00271.
A simple pearl earring is an all time classic jewellery item, going from sophisticated to casual with just an outfit change. This amazing pair of pearl earrings takes it to an entirely new level. I think this is the best pair of pearl earrings we’ve ever offered in our estate department. Large South Sea pearls over 10mm diameter are far more scarce than the typical Japanese salt water pearls often used in better quality necklaces and earrings. South Sea pearls can take up to 4 years to form, and only around a third of the harvest is considered round in shape.
There are limited areas suitable for this type of pearl farming and they are quite environmentally sensitive. South Sea pearls are rare and valuable in larger sizes of good quality, we don’t see them very often. This well matched set measures 11.8 and 11.9mm diameter, they have a silvery white luster and are virtually blemish free.
The pearls have been 1/2 drilled and glued to an 18 karat gold post on the white gold settings. The brown material on the back of the pearl is not dirt but epoxy that has yellowed over the decades since it was assembled.
While it’s difficult to say exactly how old this pair is, we think they date sometime from the 1970s. They are surrounded by 28 round brilliant cut diamonds measuring just under 3mm, and have an estimated total weight of over 2.50 carats. The natural diamonds are tightly set using shared claws with minimal stone coverage promoting maximum sparkle from the high quality VS-H stones. Only the best components were selected when crafting these showstopping earrings. A generous amount of 18 karat white gold contributes to a finished weight of 10.8 grams. Thankfully the manufacturer selected a spring loaded “Omega” lever back design to secure them. This pierced ear system distributes the weight better than a simple post with butterfly back. The earrings are in excellent condition showing no wear are tear. Estate priced at $6,000.00 CAD. Stock #211-00163.
Bright fuchsia rubellite (pink tourmaline) have been our most popular coloured gemstone in our estate department for a few years now. We find that surprising as blue sapphire are typically the most requested gem, following by ruby and emerald. Maybe it’s the fact that few gems come with this sort of saturation of colour for a price that many people can afford. Finding this sort of colour intensity with sapphires, rubies, and emeralds would cost exponentially more than the rainbow of hues available in tourmaline.
This stone is alive with brilliant flashes of pink and purple, courtesy of the checkerboard fancy cushion cut. It measures almost exactly 9mm x 7mm and is estimated to weigh a nice tidy 2.00 carats. The centre rubellite is surrounded by a five segment scalloped edge pinwheel design setting. The five channel set sections contain 43 tapered baguette cut diamonds weighing an estimated 0.50 carats. The high quality VS-GH diamonds are well matched, and expertly set in protective channels. The overlapping design adds a soft finish to the explosion of colour and contrast with the rest of the ring.
It has been hand crafted in premium 18 karat white gold. The 4.9 gram ring measures a finger size 7 and can be adjusted up or down as necessary. Included with purchase is a 2004 appraisal from Ricci Fine Jewellery Toronto.
The centre tourmaline shows some minor abrasions on the facet junctions of the checkerboard crown but they go unnoticed except under close scrutiny. The rest of the ring is in very good condition showing no areas of wear except the rhodium plating getting thin in sections. A quick rhodium plate will give the 18 karat white gold a brilliant chrome white finish if you wish. This is a lot of colourful sparkle for the estate price of $1,980.00 CAD. Stock #206-00590.
Despite the immense variety of watches available, the vast majority can be classified into three categories: either manual wind, automatic or quartz. Manual wind watches are the oldest technology dating back to the first pocket watches. With manual wind watches, every day or two you must physically wind the mainspring to store the required energy to power the mechanism. Automatic watches run on mechanical energy generated by the movement of the wearer’s wrist which winds the mainspring and then slowly, predictably releases power to the hands. Automatic watches never need a battery— only the occasional service. The exceptionally well-tuned, high end, fully adjusted, automatic watch can keep time accurate time to +/- a few seconds per day. Quartz watches instead rely on a quartz crystal to keep time, which vibrates when an electric current is passed through it.
In most quartz watches, the crystal will vibrate exactly 32,768 times per second, which the watch can use to keep time to an accuracy of better than +/- 1 second a day. The downside of quartz watches is that they need a battery to power the circuitry and move the hands. The Grand Seiko “Spring Drive” movement takes the best aspects of a traditional manual wind watch with the accuracy of the finest quartz movement but without the need for a battery, capacitor, or any other electric storage system. Seiko’s “Tri-Synchro Regulator” technology is like nothing else. Like a manual watch, its power comes entirely from power stored in the mainspring that is very slowly released. However, instead of powering a traditional balance wheel through a series of gears to the hands; mechanical energy is used to power a tiny generator producing a continuous electric current. This current first powers a quartz crystal, keeping time much more precisely than any mechanical balance wheel oscillating over 4000 times slower ever could. The watch then compares the frequency of the quartz crystal with that of the spring drive glide wheel and uses the remaining current to apply a frictionless electromagnetic brake on the wheel to regulate its speed.
The brake keeps the wheel perpetually spinning at a precise rate as determined by the quartz crystal. No battery to replace, and no rechargeable capacitor to fail as with every other quartz watch including solar-powered watches. You get the best of both worlds: the accuracy of quartz watches with the convenience/reliability of old fashion hand wind. There truly is no other watch in the world that even comes close to this level of ingenuity.
Keeping the dial of the watch free from anything other than the most basic 3 hand timekeeping duties, this watch features a power reserve gauge visible through the transparent display back.
Our newest estate watch comes from a Canadian authorized Grand Seiko agent purchased in June 2020. The watch is in hardly worn condition. It was stored unworn from the initial purchase in June 2020.
It was then occasionally worn from May 2022 until December 2022 before finding its way to Bill Le Boeuf Jewellers. The only evidence of use are insignificant scuffs on the case and buckle that are only revealed under extreme scrutiny. There is a small impact mark on the bezel at the 5 minute position that can be seen with the naked eye.
The watch remains in its original unpolished condition. This is one of the rarest Spring Drive Grand Seikos with only 700 produced commemorating the 20th anniversary of the Seiko Spring Drive technology.
Unless you were sharp out of the gate and pre-ordered one of these, they were likely sold out before you ever knew they existed. These watches carried a CAD MSRP of $10,300.00. On the secondary market, used versions are selling for significantly more than the original price. It comes complete with inner/outer boxes, documents, and endorsed warranty papers.
The previous owner lost the white cardboard box sleeve and tan travel pouch after these images were taken. The watch is running perfectly and keeping better time than certified chronometer requirements. It remains under the Seiko warranty until June of 2023. Bill Le Boeuf Jewellers will provide a 1-year warranty extension for the new owner. We are thrilled to showcase only our 2nd Seiko Spring Drive for the estate price of $12,500.00 CAD. Stock #501-00053.
Tag-Heuer have enjoyed a comfortable presence in the midmarket luxury segment of Swiss watchmaking seemingly forever. They are one of the most recognizable brands with a strong identity and association with motorsports and sporting lifestyles in general. In 2022 they introduced solar powered technology to the popular Aquaracer line of sports watches. The “Solargraph” features a new quartz mechanism co-developed with La Joux-Perret Manufacture in La Chaux-de-Fonds, Switzerland. Hidden behind the semitranslucent dial is a solar collector that can efficiently store a days worth of energy with just one minute of light exposure.
A full charge is achieved after 40 hours of light exposure that lasts 10 months. The clever design also features a power save mode. When not in the light the movement enters into a power conservation mode, once exposed to light again it comes back to life after about 10 seconds.
Tag Heuer say rechargeable power cell should be good for 15 years before needing replacing. That means this watch needs zero maintenance until the year 2040! This watch was given as a workplace presentation gift earlier this year. The recipient isn’t a “watch person” and was never going to wear it. It came to us in perfect unworn condition, still sporting some of its protective delivery stickers on the buckle and bracelet.
It measures a popular ladies size of 34mm diameter. The iridescent mother of pearl dial is very pretty offering a subtle display of rainbow colours as the watch is moved. This watch offers all of the regular Aquaracer diver/sports features including a 60 minute one way bezel timer, locking buckle with folding length adjustment link, threaded crown with guard, luminous hands and calendar display.
The watch is covered by the Tag-Heuer 2-year warranty that should be able to be extended to 5-years through Tag Heuer’s online registration portal. This model is a current offering on the Tag Heuer website where is retails for $3,250.00 CAD. Our never worn estate example is price $1,000.00 less at $2,250.00 CAD. Stock #520-00173.
We have many diamond anniversary estate rings in stock, but this one comes with a lot of extra no cost value. This one has been crafted using matching Canadian sourced natural diamonds. If that wasn’t enough, each diamond has a unique serial number along with a maple leaf logo confirming its Canadian identity.
The microscopic serial numbers have been permanently laser etched on the edge of each diamond. Keep in mind these diamonds only measure 2.1mm in diameter and the edge (girdle) of these little stones is likely only around 0.1mm thick. It’s amazing we have modern laser technology that can engrave at such a minute scale.
Without a good microscope you’d never know these diamonds were Canadian. The ring comes with a credit card sized certificate displaying each serial number. The 14 white gold ring measures a finger size 7 and can be adjusted up or down as needed. The flat edge makes it versatile enough to be worn on its own or with pretty much any other ring with a flat edge. Excellent condition and estate priced at $770.00 CAD. Stock #121-00276.
An absolute classic gent’s ring design that hasn’t changed in well over 100 years. It still looks good today and is available as an empty 14 karat gold setting without a diamond at Stuller.com for around $1,600.00. By the time you add a diamond measuring around 6.5mm diameter you could easily add at least a few thousand dollars more. Attractive ring with a curious name. Within the jewellery trade, this style of ring is known as a “Belcher” setting. I always wondered why it had acquired this curious name. A quick Google search came up with this plausible explanation from EraGem.com “The buttercup setting is also known as the Belcher setting. Some jewelry references claim that the setting was named after an American jeweler named Thomas Belcher. I was unable to find any notable jewelers with this name. What I did discover is that the setting was likely named after a famous English boxing champion. You heard that correctly, a bare-knuckle fighter, James “Jem” Belcher, who held the championship title between 1800 and 1805. (source) During his brief reign, he distinguished himself not only as an excellent fighter, but also as an English dandy. The wealthy men who attended his fights often paraded him around to the highest society events of the day. (source) His distinctive style included a signature blue and white neckerchief, a style which took off. This type of men’s scarf, worn around the neck and often secured with a ring, came to be called a Belcher. The ring became known as a Belcher ring. (source) For reasons I have not been able to ascertain, this scarf ring became closely associated with this gorgeous Victorian ring setting. Incidentally, Jem had a brother name Tom, who was also a famous boxer. Perhaps this is where the rumors about an American jeweler named Thomas Belcher got started.”
Our Belcher ring looks like it has never been worn, there are no worn areas of any kind. It contains a good sized round brilliant cut diamond measuring approximately 6.2mm diameter and is estimated to weigh 0.86 carats. This natural diamond displays a significant inclusion that is visible without magnification.
The reflective yellow gold setting enhances the apparent colour of the diamond helping to appear much more white than our estimate of M colour. Measuring a finger size 9 with a thick shank, the ring can be adjusted up or down as needed. High quality construction made to last a lifetime, featuring solid full shoulders with an opening under stone to facilitate east cleaning.
It weighs well over 8 grams and looks like new. Including the 0.86 carat diamond this ring is priced less than the replacement value of just the empty setting. Estate priced at $1,500.00 CAD. Stock #116-00101.
Nice sized watch that could be worn by a man or a woman given its reasonable size of 35.5mm diameter. This is a good one, just the basics in clean classic Cartier style. Simple white dial with big Arabic numerals and hash marks, large blued steel luminous hands/markers allow easy time interpretation under all lighting conditions.
The continuously sweeping second hand and calendar with extra large display at 6:00 o’clock is a great feature for those of us with 40 plus year old eyes. An innovative canteen style crown guard adds an interesting style highlight as well as keeping the watch water resistant to 100 meters.
The Swiss made automatic winding movement is keeping great time with all functions working as designed. Our master watchmaker performed a full overall to the movement in April 2025. The electronic timing report shows better than expected performance considering this watch is not a certified chronometer.
Overall condition is very good. The stainless steel case and bracelet are showing some minor scuffs and scratches but the watch appears as if it was only occasionally used. Our onsite goldsmiths can easily polish away the minor scuffs and scratches on the bezel and bracelet while you wait should you want the watch to look practically like new.
Includes a one year Bill Le Boeuf Jewellers warranty covering all aspects of mechanical defects and failures except those caused by misuse or moisture. The bracelet has 13 links allowing the watch to fit wrist size of up to 7 1/2 inches, showing very little sag from wear and zero stretch.
Many Pashas on the market have had some of their adjustable links removed. If you need a replacement link or two keep in mind they are going to cost you at least $100.00 each. The bracelet on our Pasha is missing only the small half sized link. Our full length Pasha Big-Date is estate priced at $2,950.00 CAD. Stock #501-0382.
Fashion comes and goes, but style is forever. Made yesterday or a century ago the three stone design is an absolute classic and versatile design that is complimentary to almost anything. It’s hard to date this sort of ring but we think this one is likely from the 1980s. The 4mm flat shank with low cathedral shoulders is comfortable and provides extra support to the four prong “V” settings. The open design allows maximum light and is easy to clean.
The centre diamond in this trio measures 4.2mm diameter, is estimated to weight 0.29 carats and sits just a touch higher than the other two. The three round brilliant cut natural diamonds are very well matched and showcase very good clarity of VS, with a pleasing HI colour, and good cut. The 3.9 grams ring measures a size 7 and can easily be made larger or smaller by one of our onsite goldsmiths.
These rings make great engagement, anniversary, or dinner rings. They pair very well with anything that has a flat edge. It is in excellent condition showing minor wear on the prongs, but needing no attention or rebuilding. You could by a 3 carat lab-grown solitaire that no one is going to believe is real or something like this tasteful and sophisticated natural three-stone classic showcasing mother nature grown diamonds. Estate priced at $1,860.00 CAD.

Like new, 2021 Breitling Chronomat 42 with an extra Hirsch brown leather strap for 30% less than its replacement price. This watch was only worn a couple of times before it made its way to our estate department. Purchased at a Canadian authorized Breitling agent in the spring of 2021. The in-house manufactured 47 jewel B01 chronometer movement is a thing of beauty and something Breitling is very proud to show off through the transparent sapphire display back.
In addition to an easy to read (day or night) 3 hand time display, model IB0134101G1A1 features a 12-hour elapsed time chronograph, tachymeter scale, plus a convenient and discreetly located 31-day calendar.
The screw down crown and thread case back allows the watch a more than adequate water resistance rating of 200 meters. A touch of 18 karat rose gold trim on the polished 60-minute ratcheting bezel and controls gives this do it all watch an excuse to be used on your next dressy occasion.
The throwback bullet bracelet is a Breitling original that hasn’t been seen on one of their products in close to 2 decades, and I for one am happy to see it return.
This design is unique to Breitling and is a refreshing departure from the many “Rolex-looking” bracelets you see on other luxury brands. The few times the previous owner wore the watch it was only on the soft brown Hirsch leather strap, the extra long bracelet remains in unworn condition.
This watch is a current Breilting offering and can be seen on their website where it carries a price of $13,400.00 CAD. The next owner will benefit from Breitling’s 5-year international warranty until April 2026.
Including all of the original documents, packaging, plus the extra leather strap, this watch is estate priced at $7,500.00 CAD. Stock #515-00063.

This ring captures all the most popular themes in modern engagement ring style. I do not think this ring is any older than a couple years. Cushion shaped halos are one of our best sellers. The split shank design with milgrain detail, bead set shoulder diamonds running down the shank and hand engraved highlights in the gallery add sparkle and bling from every direction. The bezel set pink sapphires on each side of setting are a cheery playful highlight to this contemporary ring.
The ring comes with an April 2019 appraisal from Shelemay Jewellery Appraisals Ltd. It is a thorough document that describes in good detail the components and their quality that are contained in the ring. The ring is described to contain 1.50 carats total weight of pink sapphires and diamonds of SI2-HI quality. Our cautious and conservative opinion and appraisal approach calculates a total weight of closer to 1.30 carats.
The April 2019 Shelemay appraisal suggests a retail value of $7,600.00 plus sales tax. Our more competitive opinion of replacement value is quite a bit less. As a lightly used, previously enjoyed ring we have it priced at just $2,100.00 CAD. Stock #101-00636. 
Feathers have been used as items of decoration pretty much as long as humans have been around. Aside from the fleeting beauty of a flower blossom, there are few natural objects more beautiful of a colourful feather. These custom made feather pendants expertly capture the spirit and accuracy of the real thing. The fine parallel texture is reminiscent of a Florentine finish mimicking the locking fibres of a bird feather, every once in while the pattern is broken with a space the same as you’d expect in a real feather.
Excellence of manufacture and high quality are showcased in premium 18 karat and ultra high end 22 karat gold with VS-GH single cut diamonds. The warm yellow gold has a slight blush hue likely attributed to a tiny amount of copper added into the 91.6% pure gold alloy. The 18 karat white gold section forms the tapering calamus running down almost to the tip of each feather. A little sparkle has been achieved by adding 25 graduated high quality (VS-GH) single cut diamonds to the bright white gold. They have been expertly bead set with perfectly formed bright cut diagonal accents and millgrain edging.
These pendants truly showcase the work of a master goldsmith. The two-tone design allows the pendants to be worn with either yellow or white gold chains. Large hidden bails in the back will accept a variety of chain styles and sizes. They can be worn separately or as a flattering set. We are selling them individually but we hope they stay together.
The small pendant measures 3.7cm long, weighs 2.4 grams, and contains 7 diamonds (0.05ct. tw.), the large feather is 6.3cm long, weighs 7.4 grams, with 20 diamonds (0.20ct. tw.).
The pictured chains are not included with purchase but give you an idea of how they hang. They are both in perfect condition and have not been restored, polished, or refinished in any way. Estate priced at $718.00 and $2,240.00 CAD. Stock #161-00342 & 161-00343.
SOLD
Spend some time in Omega’s online museum and you’ll learn more about their watches than you’ll know what to do with. The history of the Constellation is surprisingly interesting; developed in 1952 to commemorate Omega’s chronometric (accuracy/timing) achievements at the world’s observatories. The line was redesigned in 1982 launching the Constellation Manhattan which featured on its case back the Cupola of the Geneva Observatory and 8 stars.
The 8 stars on the case back represent two chronometer accuracy timing records and six awards Omega received for accuracy competitions between 1933 and 1952. This model continued the Manhattan tradition of the bezel Griffes or claws on the case, originally designed to hold the crystal in place and keep the watch watertight.
In 1995, the line was updated with a more rounded case, slightly domed bracelet links, and a curved crystal. This member of the ’95 collection dates from around 1998 and comes equipped with a factory-delivered diamond marker, mother of pearl dial with the optional and costly diamond set bezel. Made from stainless steel and 18 karat yellow gold with a 25.5mm case the watch is in good original condition. It shows small scuffs and scratches as a testament to careful use, the bracelet remains tight with zero stretch or sag. Its condition appears completely original with no signs of polishing or refinishing. The fully jewelled, super accurate quartz, calibre 1456 movement is running perfectly and keeping excellent time.
The very pretty natural mother of pearl dial displays a lovely iridescent effect as the watch is moved. This special diamond dial was a $950.00 upgrade over the basic champagne or silver painted dial, the diamond bezel added $1,850.00 more.
Omega only use very good quality brilliant cut diamonds of at least VS-FG standards. The 50 diamonds used in this watch weigh a combined 0.50 carats.
The original MSRP of this watch in 1998 was $6,350.00 CAD. Omega still make a version of this watch in a slightly smaller 25mm size with a few style tweaks and a price of $12,100.00 CAD. The current design can be seen on the Omega website here. Our latest one owner watch was purchased new at Bill Le Boeuf Jewellers when we were official agents for Omega. It does not come with any original packaging or documents. The bracelet has been sized to fit a smaller sized wrist. We can supply a few extra links if necessary.
It is running great and keeping excellent time. Including our complimentary one-year Bill Le Boeuf Jewellers warranty, this watch is estate priced at $3,500.00 CAD. Stock #510-00164.
Add a little colour to your life with this Gabriel & Company pink tourmaline and diamond ring. G & Co. are a very popular luxury jewellery brand who make beautiful engagement/wedding rings plus other jewellery items.
This dinner ring features a very saturated fuchsia rubellite (pink tourmaline). The faceted oval gem measures approximately 9mm x 7mm and is estimated to weigh 2.10 carats. Vivid colour and excellent clarity really make this one dance with brilliance. The major source of high quality Rubellite is Brazil, but it can also be found in Madagascar, Africa, and even the United States. The contemporary halo design contains 70 small round brilliant cut natural and pear shaped diamonds of very nice VS-GH quality.
The small diamonds add an estimated 0.55 carats of sparkle to this contemporary design. The low profile setting and three section shank make this a very comfortable ring. The inside of the back section has been decorated with a wire lattice adding an extra level of comfort, detail and easy cleaning.
We couldn’t find this exact ring on the Gabriel & Co. website, but we found a similar style in yellow gold that cost $6,700.00 CAD (without a centre stone). Our ring measures a rather smallish finger size 4 1/2 but it can be adjusted up a size or two if needed. It is in excellent condition showing almost no use.
Just some rhodium wear on the bottom of the shank is your only clue this ring has ever been worn. In our traditional blue presentation box this beautiful ring is estate priced at only $2,350.00 CAD. Stock #206-00614.
SOLD
Tudor’s affiliation with Italian motorcycle manufacturer Ducati goes back to 2011 with the introduction of the first Fastrider chronograph made from stainless steel. Fast forward a few years later to the Black Shield version with a case made from super hard ceramic and a stealthy blackout dial.
The edgy look is a big departure for a conservative brand like Tudor. What is conservative about the Ducati collaboration, is the fact this watch does not display Ducati anywhere on the dial or case back. The only connection is a subtle application of Ducati’s shield shaped logo (not dissimilar to the Tudor shield logo) found on the side of the case at 9:00 o’clock.
The shield shape application frames the date corrector pusher. Rather than spinning the hands forward through 24 hours, you can advance the date quickly by pushing the tiny recessed button with the tip of a pen or similar tool.
Tudor decided this would be a clever place for the Ducati connection and also concealing the unusual date correction feature. The ETA /Valjoux 7753 based chronograph movement predates Tudor’s adoption of the their modified Breitling B01 chronometer chronograph powering contemporary Tudor chronograph models with the traditional quick-set date feature.
This is an uncommon and unusual watch, it is the first one to pass through our estate department. While the case is made from ceramic, the pushers, crown, Ducati shield, and deployment buckle have been crafted in black PVD (physical vapor deposition) stainless steel that is cost effective but nowhere near a hard as ceramic; as such these components can show scratches and wear over time. The curiosities continue with the elongated shield shaped hour markers finished in a golden/brown sand finish along with matching hands.
This watch also displays the Tudor brand name on an applied horizontal bar, this is something we haven’t seen before.
Like the Rolex Daytona and other sporting chronographs, the Fastrider is equipped with a tachymetre bezel scale for measuring units per hour.
Fitted to the 42mm ceramic case is a very soft black rubber strap with signed blackened stainless steel deployment buckle.
The previous owner swapped out the black rubber with a light brown suede leather strap for a different look from time to time. This extra strap is included with purchase.
The watch is very good condition and running well. Including a complimentary 1-year warranty the watch is estate priced at $3,200.00 CAD. Stock #505-00580.

SOLD
Sauro Jewelry from Italy is unlike almost any other manufacturer in the jewellery business. There are many excellent manufactures producing high quality products but few with the technical precision of Sauro.
The gold chains, bracelets and rings they make are fabricated with the kind of engineered precision similar to what you’d expect from a luxury Swiss watch brand. Proprietary and patented clasps with complex interlocking links are trademarks of Sauro designs.
These necklaces and bracelets are for people who appreciate more than just precious metal and high quality, they are made for those who understand what it means to wear something that is truly special and unique.
You can buy a common curb, box, figaro, mariner or rope chain pretty much anywhere, but Sauro products are almost one of a kind. Most of what they produce is made to order.
When Sauro produce something new, it’s just that, something that has never been seen before. We have a good selection of necklaces and bracelets from this prestigious brand from Vicenza, Italy.
They are all priced waaaaaaay below their wholesale cost at only 20% over just the value of gold they contain! The replacement value of these necklaces and bracelets is close to three times their actual gold content.
Many of these like new estate chains and bracelets can be seen on the Sauro website with pricing in USD. Italian made jewellery of this quality is difficult to produce, time consuming, and can only be accomplished by the best craftsmen and women in the industry. It takes a combination of advanced casting and machining techniques plus the skills of highly trained master jewellers. At today’s gold price (Oct. 6, 2025) of $5,525.00 Canadian per ounce, every gram of 18 karat gold is worth over $133.00. We are offering our entire Sauro chain and bracelet collection for just 20% over the melt value.
Our collection consists of 18 karat yellow, white, rose, and two-tone creations, all priced at only their melt value plus 20%. We also have a few bracelets that are decorated with up to 2.75 carats of natural round brilliant cut SI-HI diamonds. Diamond set items are still priced at gold value plus 20%, and $300.00 per carat of diamonds! The price of these items will fluctuate a little with the daily price of gold.
If you you’d like to see and feel what precision built Italian chain and bracelets are, come in to have a look a our Sauro collection, you’ve never seen designs like these before. Please contact us as we have more than what you see in these images. Wholesale enquires are welcomed. Estate priced at only $159.00 per gram.
These almost went into our showcase without being showcased online, until we noticed the extra bright-cut engraving on the inside. There are many items that come and go with regularity but never get the online exposure they deserve. Sometimes only our local walk-in customers find the little hidden treasures in our estate department. These are hollow construction but heavy enough gauge to be engraved with the leaf/vine design. The engraving shows up very well against the brushed finish. Hollow yes but also sturdy, the seamless tubing earrings weigh a combined 2.28 grams. Heavy enough to provide good durability but light enough to be very comfortable. They measure approximately 1 inch in diameter, 4.6mm wide and are secured by riveted wire and friction lock.
Crafted from upgraded 14 karat. We love how the engraved pattern on the rounded outside profile is mirrored on the flat inner contour.
As obvious as this is, we almost never see the inside of a hoop earring decorated like this. They are in perfect condition and estate priced at $392.00 CAD. 426-00342.
SOLD
This is one of the most interesting watches we’ve had the pleasure of showcasing. The Longines Admiral Mystery Dial is a dressy creation from one of the oldest Swiss watch manufacturers. The roots of Longines can be traced back to 1832 when Auguste Agassiz founded the brand in Saint-Imier Switzerland. The factory still stands today in the same location it was build in 1867.
The Longines Mystery Dial was not the first watch to display the time in this manner but they are likely the most well known. Longines’ vision of the Mystery retains a traditional minute hand, but with a chevron shaped gold index applied to an hour disc.
The simple illusion results in the chevron hour indicator that appears to mysteriously float and track the hours as time passes.
We’ve sold many thousands of new and estate watches since we opened our doors in 1958 but this is only the second Mystery Dial we’ve seen. According to the 11.2 million serial number, this watch dates from 1960. Longines produced several different Mystery Dials watches over the years. Some were simple hand-wind gold plated/filled and far fewer were made in solid gold with self winding movements. Our example is the far more illusive automatic winding version in a solid 14 karat gold case.
Both dial sections retain the original sunburst and crosscut textured finishes. The hour markers consist of tapered hash marks with funky looking corrugated diamond shaped markers at 3, 6, and 9 o’clock positions.
A cross cut Florentine texture on the case bezel is believed to be original and is still in very good condition showing good relief.
Longines Mystery Dial watches are scarce to say the least. We tried at length to find another image online with the same dial and case texture without success; this is one rare watch. We received the watch in running condition but missing a crown. After a full service, new original stem and generic crown, the watch is running very well and keeping good time. Powering the 33.4mm diameter watch is the Longines automatic winding calibre 19A 17 jewel movement.
This shock protected mechanism features solid gold jewel settings and an innovative winding mechanism employing ratcheting pawls instead of gears to lock the automatic winding wheels that is similar to the IWC Pellaton system.
The watch is somewhat small compared to many contemporary designs but appropriate for its vintage nature. It can be worn by anyone who appreciates unusual luxury watches. A new 18mm soft leather strap from Hirsh was just fitted to the watch. Including a 1-year warranty (prorated 4 additional years) this rare Longines is estate priced at $1,900.00 CAD. Stock #501-00349.

Classic Carrera good looks that go back to the mid 1960s when the name first appeared on some of Heuer’s sporting chronograph equipped watches. 60 years later the same case design is still available as displayed by this more modern model but with the uncommon vintage looking Arabic dial.
The Tag Heuer WS2113 adds a useful feature in addition to the basic time and calendar functions. From the Twin-Time name you may be able to guess. This watch offers a second time zone (or GMT/Greenwich Mean Time) displayed in 24 hour format by the long slender arrow tipped hand.
This extra hour hand is perfect for the world traveller who wants to keep track of his home time too. For someone who wants local time displayed in a 24 format the hand can be coordinated to show a single time zone. The highly polished 35.6mm case is in very good condition except for a couple dings showing up on the sharp edges of the lugs.
These are shallow impact marks that could easily be removed but we’d prefer to keep the watch in its original condition. The automatic movement is working well keeping good time. A never worn 18mm black leather Hirsch strap utilizes the original Heuer signed stainless steel buckle.
This watch does a great job as a homage to the early Carrera models as it is only signed Heuer and not Tag Heuer.

Early Carrera chronograph models are quite collectable among watch collectors with excellent chronograph examples trading hands for close to $10,000.00. While this watch is not worth anywhere close to that it should do okay in the future with its traditional good looks, dual time capability, and the quite uncommon black Arabic dial. After we took all these photos we noticed a small crack in the domed plastic crystal edge at 6:00 o’clock. We have since replaced the crystal with an original. Including Bill Le Boeuf Jewellers 1 year warranty the watch is estate priced at $2,300.00 CAD. Stock #520-00149.
Silver may be priced at an all time high right now, but that doesn’t mean it is expensive. Silver has seen significant price appreciation but is still 87 times less expensive than the equal weight in gold. With gold closing in on $5,000.00 CAD per ounce, the appeal of silver is becoming more tempting all the time. This selection of Johnson Matthey silver bars is a great way to get into the bullion market that also has a collectable angle too. In 2015 and 160 years of silver and gold refining Johnson Matthey sold its refining business to Asahi Holdings of Japan. Why Asahi decided to abandon the JM name is a mystery to those of us who remember how respected the Johnson Matthey brand was. These vintage silver bars are individually serial numbered and come with a purity of 99.9%, which is more than enough to be sold sales tax free in Canada. The Canadian Revenue Agency looks upon the sale of fine bullion like this as a financial transaction and therefor not subject to sales tax. These bars are on offer for only the value of silver they contain plus 5%. For an up to the minute price for silver billion click here. First come first serve and being sold as a set of six only. For VISA and MasterCard purchases please 2% fee to cover credit card costs. Stock #912-00760.
SOLD
Silver bullion is so close to an all time high but it still seems undervalued right now. 1 ounce of silver is around 87 times less expensive than 1 ounce of gold. The historic relationship of gold vs. silver price is more like 40 to 1 and gold is only around 17 times more rare than silver. There have only been a few times in history that I’m aware of when the gold/silver ratio has been much higher. This tells us that gold is overpriced or that silver is underpriced. With all the chaos in the world my personal opinion is both silver and gold are under valued but much more so in the case of silver. With silver pricing as low as it has been for the last few years we’ve slowly been acquiring silver but seldom do we sell any of it. For all those people who call us asking for silver bullion here’s your chance. This 100 ounce bar of 999.9 fine silver were made by The Royal Canadian Mint. The bars measure just 18.4cm x 8.1cm x 2.1cm but are surprisingly hefty when you hold them in you hand. They each weigh just a little under 7 pounds. RCM bars are about the most sought after brand in the business. The Royal Canadian Mint’s products are universally acknowledged as among the most pure in the world. Many silver bars are 99.9% pure; these RCM bars are 99.99% fine silver. We usually squirrel away these but at the moment it is taking up too much room. Who knows the next time we’ll sell off some of our silver hoard (don’t hold your breath). There is no sales tax on the sale of precious metals, as Revenue Canada looks upon these sales as financial transactions therefore not subject to any form of sales tax. Everyone should own some bullion as security against the effects inflation has on your cash. This is only 100 ounce bar we are selling at the moment. Estate priced at just the silver value it contains plus 4% (VISA & Mastercard purchases please add 2% to cover credit card fees). First come first serve. Contact us immediately if you’re interested. Stock #912-00678.
SOLD
When this watch was made in 1970 Omega had produced a little over 30 million watches since there inception in 1848. They were producing around 4 million watches annually. Rolex by comparison had produced only around 3 million watch since their founding in 1905 and had annual sales of around 200,000 watches per year. Omega dominated the Swiss made market for the majority of the 20th century.
This was the heyday of Swiss watch production. The Swiss had absolute control of the watch industry. Their luxury mechanical watches were eagerly purchased by coming of age baby boomers and their parents. There were lots of great paying jobs and the world economy was booming. As a nod to complete luxury, not only is the case and bracelet made entirely of premium 18 karat gold, so is the dial as indicated by the OM text at the bottom.
OM stands for “Or Massif” which translates to solid gold in English. A solid gold gents Omega on bracelet is a very rare find for us. This is one of only a handful of vintage examples to pass through our estate department. The condition looks almost completely original. The 18 karat sold gold dial (not painted) is in very good condition, showing very minor oxidation stains.
An integrated link bracelet graduates in width to the fold over snap buckle. An embossed Omega logo on the buckle shows little wear, even the subtle striped pattern is still visible. Tight joints in every link show show a small amount of wear and a touch of stretch in the heavy bracelet.
It’s hard to say with 100% certainty but we think the only thing not original is the crown. The gold capped crown is possibly a genuine replacement item as it is signed with the more modern short Omega logo and exhibits the expected degree of wear.
There aren’t too many service records etched in the case back and the plastic crystal displays the corporate logo embossed in the center.
Housed inside the gold case is a beautiful Omega 20 jewel in house calibre 1001 that is running well and keeping great time. Rose gold plating on the movement still display the type of finish that helped earn Omega great respect among those who serviced them. My father was a watch maker who learned his craft in the late 1940s. I remember him saying how Omega watches were a pleasure not only to look at but to work on too. This slender movement was independently certified to chronometer status making it one of the most accurate wrist watches of its day. To earn certified chronometer status the watch must maintain accurate time keeping of better than 99.99% per day.
The movement was overhauled by our master watchmaker in June 2023 and is performing well within certified chronometer levels of accuracy. The timing report shows a gain rate of just 1 second per day, an excellent balance amplitude of 284 degrees, and a perfect beat error of zero milliseconds.
Looking for similar watches online lines reveals very few to compare. The case back numbers of 166.059 168.047 doesn’t really help in finding many as nice as this one. I suspect many of these watches were melted down over the years to access the gold value they contain.
This watch has a weight similar to that of a solid gold Rolex Day-Date of the era at over 142 grams. Removing the movement and crystal leaves a net weight of 125 grams including the solid gold dial.
At the current price of gold (over $5,421.00 CAD Oct. 3, 2025) the value of just the gold in this watch is $16,340.00! This is a good sized watch that wears much larger than its 33mm wide case size suggests. The 18 flexible link bracelet will accommodate a wrist size of over 8 inches. For a 55 year old watch, we’d consider the overall condition to be quite good.
Including a complimentary 1-year Bill Le Boeuf Jewellers warranty this cool vintage Omega is estate priced at $17,000.00 CAD. Stock #510-00148.
Understated yet very exotic and unusual, this is a pair of well matched green sapphires. Yes, sapphires can come is colours other than blue. There is still blue component in their colour but the main hue is a lower tone green. It would have been a difficult task to locate a pair of matching green sapphires like these. The green colour can be attributed to the presence of trace amounts of iron in the gem.
Exposure to different elements when the crystal is forming can cause pure colourless white sapphires to change to almost any colour of the spectrum. These earrings are bright and lively, the images can’t capture to reflective sparkle of sapphire. The previous owner likely had this pair custom made as we’ve never seen a set like them before. The olive colour is paired very well with the rich yellow colour of the premium 18 karat yellow gold double gallery settings.
The settings are another clue that these aren’t an off the shelf item, as most earrings of this design are made from 14 karat gold. The basic double gallery settings are secured by surprisingly sturdy butterfly friction back that bite strongly on the 1mm posts. This pair of unusual stud earrings weigh a very comfortable 2.2 grams in total. They are in like new condition and estate priced at $1,200.00 CAD. Stock #211-00158.
SOLD
The popularity of all things Rolex GMT continues with every model they make. Stainless steel GMT-Master II watches are still among the most difficult to find at Rolex agents. When nice used ones turn up second hand, they have asking prices close to twice retail. It’s still a crazy market for certain luxury watch brands, far more demand than supply has many used watches selling for much more than new ones.
The Tudor GMT 79833MN was once selling for more than retail on the secondary market but prices have eased quite a bit for this model. Our latest Tudor GMT is in 100% original condition and was only lightly worn by a customer of Bill Le Boeuf Jewellers. It was only occasionally used in rotation with other watches from his collection. The condition is almost like new, there are only a few scratches on the deployment buckle; the case remains in new condition. It has never been polished or refinished in any way.
In addition to offering the basic 3 hand timekeeping function with a calendar, the GMT has a few tricks up its sleeve. The diamond-shaped tipped thin hour hand can point to a second time zone shown in a 24-hour format displayed on the black/brown bezel.
The traditional hour hand (local time) can be set independently of the 24-hour 2nd-time zone hand without disturbing the actual time. This handy feature is perfect for the world traveler when moving back and forth through different time zones. The rotating bezel can be turned to temporarily display a 3rd time zone. Daytime hours are shown in brown and nighttime hours are displayed in black on the bezel. The 41mm stainless case is water-tight to 100 meters, protected by a screw-down crown and case-back. Large hands and hour markers contribute to excellent legibility in any lighting condition courtesy of highly luminous pigment.
The snowflake hands, aluminum bezel insert, and connected minute track on the dial give the Tudor GMT an attractive vintage appearance. Comes complete with everything originally supplied when purchased from the Tudor authorized agent in January 2023.
This watch is covered under the terms of Tudor’s 5-year international warranty until early in 2028. Take advantage of a pause in the luxury watch market and a weak Canadian dollar with this popular and collectible Tudor. The watch is estate priced at $4,400.00 CAD with no extra tariffs or duties, only applicable sales tax. Stock #505-00577.
SOLD
If you are turning 40 this year or you know a special person who is, this would make an amazing gift to commemorate the milestone. Get some while you can. Gold is on a tear, who knows where it will end up. Since gold bullion like this is not terribly rare or too collectible the value is simply determined by the intrinsic gold value and not so much the condition. As a bonus this one is quite nice and comes with a protective plastic capsule (not pictured). Royal Canadian Mint gold and silver coins are world renowned for their high quality and purity. RCM was the first mint in the would to produce a coin of 99.9% purity in 1979. They did in again in 1983 producing a gold coin of even higher 99.99%. Today they even produce some special edition coins of a remarkable 99.999% purity. 999 and 9999 coins are an easy way for the average person to invest in some gold bullion. In January 1979 gold was trading for around $225.00 USD per ounce. By early 1980 it had shot up to $850.00 USD. Not a bad return if you timed the market correctly. If you bought gold a few months after the 1980 high at $500.00 USD it would have taken you around 25 years to get your money back when in 2005 it broke through the $500.00 barrier again. Now in 2025 gold is well over $3,300.00 USD. What does all this mean? There are plenty of theories out there and one thing is for sure, the world is a much more complicated place than it was the last time gold really spiked. There are billions of people around the world who have little faith or trust in paper money and the insurmountable debt it represents, but gold has been a way to store value. Inflation only makes gold more valuable while your cash becomes less valuable every day. It’s not a bad idea to hold some of this precious metal as an alternative to cash. Buying pure gold like this is tax free, there is no sales tax on precious metals like gold, silver, and platinum. This 1985 coin is priced at the current price of gold plus just 2%. You can check out the current price of gold in Canadian dollars here. Holding a little gold is a great way to protect yourself against inflation when it takes more and more paper money to buy what you need. For credit card purchase please add 2% to cover the extra costs. Stock 912-00751.
SOLD
We always strive to bring our customers strong value when it comes to our new and estate inventory. We include every necessary piece of information to determine and compare our prices to anything else online or in store. Many vendors omit key details that make it impossible to determine the value of their offerings, it is rare to actually see a weight of a gold chain or bracelet online. Sometimes international events can affect currencies and pricing that further enhance the value of commodity based products such as jewellery. Our latest estate bracelet is a great example of a jewellery item that is heavily influenced by the cost of gold. Manufacturing plays a roll and the need to make a profit and stay in business contribute to the ultimate price, but it’s the basic cost of gold that is the driving factor determining the price for something like this bracelet. This solid curb link bracelet is rather weighty at 47.7 grams. It measures 7 3/4 inches long, if you have a large wrist this one may be a little tight. It is 12.2mm wide and 2.5mm thick.
A clever fold over clasp incorporates into the link pattern with little disruption.
At today’s gold price (Aug. 16th, 2025) of $4,610.00 CAD per ounce, this bracelet contains a $4,124.00 in just gold content and around $20.00 of fine silver alloy. As a very good condition estate item we have it priced at $5,400.00. It displays some surface scratches and scuffs that can easily be removed while you wait, but you’ll loose a few tenths of a gram in weight to the polishing wheel. When it comes to retaining value on any gold item, it is best to retain as much weight as possible. Stock #441-00308.
You won’t hear us very often on the radio and you’ll definitely never see us on TV, we like to let our products speak for themselves when it comes to soft marketing. This custom made halo design ring is a great example of our specialty. We love estate, vintage, antique jewellery and the outstanding value it offers our customers. This time of year you’re going to be bombarded with offers and claims of huge discounts and the best pricing. We’d rather just rather softly showcase high quality pre-owned jewellery at truly unbeatable values. For the same (or less) than others are offering synthetic laboratory-grown diamonds, we can offer you an outstanding quality natural diamond in a beautiful hand made contemporary setting.
The centrepiece of this modern creation is a bezel set round brilliant cut natural diamond of SI1 clarity, FG colour, with an excellent cut. When viewed through polarized light, a round brilliant cut diamond with an outstanding cut will displays “Hearts & Arrows” through the table and pavilion. We discovered taking a photo of the 8 arrows in a mounted stone is a very difficult procedure. After many attempts we did a reasonable job capturing the arrows in this image.
The hearts on the bottom side of an excellent cut diamond can’t be viewed with a mounted stone.
We love the antique look of the discreet milgrain bezel setting, it’s a refreshing twist on the popular halos we usually see set with 4 claws. The centre diamond is surrounded by a cushion shaped frame containing tightly set brilliant cut diamonds of VS-SI-GH quality. The thin 2.2mm wide shank is also decorated with high quality small diamonds. The additional stones bring the total diamond weight to an estimated 1.25 carats. Measuring a size 7, this ring will comfortably fit a lady with an average sized finger.
It can be adjusted up or down a size or two by one of our onsite goldsmiths in just a few days. We are very confident our estate price is below the wholesale cost to replace this custom made ring. It comes with a 2017 Gem Scan Laboratories Certificate of Evaluation. The document suggests a replacement value of $12,500.00.
We feel this is a rather optimistic opinion, something more like $5,800.00 would be competitive and appropriate for insurance replacement value with new. As a like new estate item, we have it priced at only $3,480.00 CAD. Stock #101-00591.
Everyone loves pure gold investment bullion. We never have enough 99.9% pure gold or silver to satisfy the requests we get for it. We also have Canadian 14 karat, 22 karat, and the occasional 1967 90% pure Canadian Centennial gold coins, plus other recognized world gold coins that are usually alloyed to 22 karat. Here are some NON bullion coins we are selling for only the intrinsic value of the gold they each contain. There is no additional markup considering numismatic value, rarity, or collectability. These coins each contain from little under 1/4 ounce to 1 full ounce of gold. The only extra charge is one we have no control over; because these coins are not 99.9% pure, they are subject sales tax. The frames on some of the coins are also priced for only the gold content they contain plus sales tax. Vintage British sovereigns, South African Krugerrands, $100.00 Canadian coins and a few others are what we currently have in stock. Everything you see here is being sold for simply the value of gold in each coin plus applicable sales tax (some have already been sold). For NON cash/debit/e-Transfer purchases please add 2% to cover credit card fees.
SOLD
Providing generations of customers the best value in new and estate jewellery gives us a great sense of satisfaction. Doing so without any fancy promotions or gimmicks is even more rewarding. We tell it like it is and our clients get it. Jewellery can be inexpensive and offer little value and it can be very expensive yet offer incredible value. Our latest estate ring offers fantastic value for a small price. This 3 stone diamond ring looks very significant with a conservatively estimated total diamond weight of 0.79 carats. Sure the stones display some warmth with the MN colour but they sparkle just fine thank you very much. Easy I1 clarity with clean centres means they look completely transparent to the naked eye without artificial magnification. The setting is a traditional cathedral shoulder design executed in 14 karat yellow and white gold. The size 5 ring weighs 3.2 grams and can easily be adjusted a couple sizes larger if required. Come in and have a look at how big and how nice $280.00 per diamond can be with this vintage ring. Stock #e11182.
In the 48 years since PAMP Suisse has been around they have grown from a small supplier of precious metals to jewellers and watch manufactures, to producing private market bullion, and suppling several international governments with currency backed bullion coins. PAMP (Produits Artistiques Métaux Précieux) Suisse bullion is recognized world wide and is among the most sought after. While not quite as common as Royal Canadian Mint products around here, it isn’t rare for us to have the odd bit of PAMP Suisse bullion in stock. This PAMP bar depicts Lady Fortuna on the reverse side on the bar.
From the PAMP website; “PAMP was the first precious metals brand to ever decorate the reverse sides of its minted bars. Introduced in 1979, the Lady Fortuna™ was the first of those artistic motifs and is today world-renowned as a trusted symbol assuring PAMP quality and authenticity. Undoubtedly, the iconic Lady Fortuna™ image is the most recognized and prestigious bullion bar design in the world. The Roman goddess of prosperity is portrayed with all of her mythical attributes: sheaves of wheat, poppies, horn of plenty, precious coins, and wheel of fortune.” This bar is in perfect condition without the slightest scuff or blemish. Our photos were taken through the protective plastic that may show some blemishes on the plastic from handling. In refined form such as this 999.9 gold bar, precious metal is not subject to any form of sales tax. The cost of this bar fluctuates with the price of gold. We are selling this bar for only its intrinsic value plus 2%. The current value of gold changes every minute and can be seen in Canadian dollars here. If you are planning to purchase with a credit card, please add 2% to cover the extra fees associated with accepting VISA or MasterCard (we do not accept American Express). Pamp Suisse 5 gram (0.1607 ounce) Lady Fortuna 999.9 gold bar, priced at spot plus 32 (no sales tax). 912-00726.
SOLD
Garnets are the perfect choice when you’re looking for rich saturated colours in applications that don’t require a super hard gem. Due to their relative softness, garnets need to be worn with some degree of caution if they are being used in a ring, bracelet or other piece of jewellery that are more prone to impacts. Earrings and pendants are a more favorable choice for the wonderful palette of colours available with natural garnets. The more common hues are usually in the brownish/red to purple range but garnets can occur in almost any colour except blue.
This premium quality pendant is crafted from 18 karat white gold with very nice VS-H round brilliant cut diamonds. The diamonds are bead set in a square frame around the dark purplish red garnet and in the elongated bail. Measuring 6.9mm x 4.4mm we’ve calculated the round brilliant cut garnet to weigh 1.50 carats. The 38 small diamonds weigh a combined 0.50 carats. This pendant is surprisingly hefty at 0ver 5.1 grams. The fixed bail will accommodate a variety of chain sizes up to 2mm wide. This pendant does not come with a chain, we have many suitable options in both new and estate necklaces that would pair nicely with this pendant.
The 17-inch, 18 karat, 3.9 gram, foxtail chain we are showing it with would make a flattering pairing for $550.00. The pendant is in perfect condition. It doesn’t show even the slightest wear from where the chain slides through. Like new and estate priced at $1,800.00 CAD (pendant only, chain extra). Stock number #161-00366.
Just because it’s old doesn’t mean it’s genuine. Until massive deposits of amethyst were discovered in Africa and Brazil this regal purple stone was as valuable and ruby, emerald and even diamond. So it comes as no surprise to see antique jewellery with imitation amethyst. This antique pendant is around 100 years old and features an simulated amethyst made of glass. It has a small cavity on a crown facet that can be seen in this photo.
Today natural amethyst is considered to be a semi-precious gem, we believe the faceted purple glass is original to the pendant. The cost of a modern amethyst this size 12mm x 9mm (2.75 carats) would only be around $100.00. This early Art Deco pendant is around 100 years old and is in very good condition, featuring 24 tiny seed pearls that are graver set into a wreath style frame. Likely made in North America as there are not many other markets using this quality of gold jewellery. The pendant is suspended from a large triangular bail that will accommodate a variety of chain sizes. We have many different styles and lengths of new and estate gold chains to select from. This pendant does not come with the box link we have pictured. The antique pendant weighs just over 4 grams and is estate priced at $371.00 CAD. Stock #231-00241.
The odds of being dealt 4 of a kind in a 5 card poker game are about 1 in 4,165. Those odds are pretty long, but these 4 of a kind silver maple leaf coins are a guaranteed winner. They are all from 2022 and feature the latest anti-counterfeit attributes. They are in lightly handled condition but still very nice. Made from 99.99 pure silver from the Royal Canadian Mint. They are among the most beautiful bullion coins and most trusted in the entire world. Being virtually pure, this form of silver bullion can legally be sold without any form of sales tax. Priced at just the silver content value plus 5% is about as good as it gets for silver maples. Sold as a set of 4 only, first come first serve. Credit card purchases will be subject to an additional 2% to cover fees. Stock #912-00730.
SOLD
Current jewellery styles are thin, light, and delicate when it comes to engagement rings, necklaces and bracelets. Vintage watches like this have always been around, but maybe we are beginning to see the watch come back as more than simply a time-keeping device or status symbol. Watches can be beautiful jewellery items too, with designs that look like they could be used on a ring or pendant.
This vintage Tudor is a lovely jewellery item as well as a high quality mechanical watch. The petite case measures just 14mm in diameter yet contains a highly evolved calibre 342 21 jewel hand wind mechanism with shock protection, that is pretty to look at and surprisingly accurate for such a tiny movement.
This rare Tudor has been crafted from 14 karat white gold in the Rolex factory with an original Rolex crown and signed case back.
There is very little information around about Tudor cocktail watches like this. In sleuthing around the internet we couldn’t find a single example of a Tudor like this. I imagine in the 1950s or 60s you could have purchased a stainless steel or gold plated Rolex for less than this watch cost at the time. I’m sure this was a cherished possession for someone for many years. It appears to be in original condition aside from perhaps a different strap, but I’m sure it came with one very close to this style when new. It is hard to determine with 100% accuracy whether or not the silver tone dial has been refinished.
The case doesn’t look to have ever been polished as the florentine finished lugs still show excellent detail. The six small round brilliant cut diamonds add the necessary bling every cocktail watch show display. They are of very nice VS-HI quality and weigh a combined 0.12 carats. The case back has only a couple of service etchings leading us to believe the watch was used more for special occasions rather than every day. Included with purchase are a one-year warranty and complimentary first service, whenever that may be. This unusual estate Tudor cocktail watch is estate priced at $1,090.00 CAD. Stock #505-00263.
Mystic topaz was first introduced at the Hong Kong Jewellery Fair in 1998. Before it is crafted into the enchanted gemstone that it is, mystic topaz typically starts out as a natural colourless or very pale topaz. A modern technique called Chemical Vapor Disposition (CVD) is employed to apply a thin layer of titanium onto the surface of the gemstone’s pavilion, creating a unique rainbow-like dispersive effect.
Our captivating 10.50 carat sky blue mystic topaz glistens with vibrant flashes of iridescent colour. Flickers of dark blue, magenta, deep purple, light teal and gold dance throughout the 14mm stone as light passes through the dazzling facets of the modified brilliant cut gemstone.
Set in a decorative filigree 14-karat yellow gold setting with replacement 10-karat yellow gold shank, the ring currently measures a size 5.5 with room to adjust. A true visual delight, this alluring treasure is estate priced at $420.00 CAD. Stock #206-00275.
A trio of nesting rings built around the timeless heart motif. The focal point of the set is the 6.45mm pave set heart that tops the white gold band. That heart features 0.05 carats total weight of I2-IJ quality single cut diamonds backed by chromy rhodium plating.
The top and bottom bands create a subtle heart outline to unify the set. All three are made from 10-karat gold and measure a finger size 7 with room to adjust. Estate price for the set is $420.00 CAD. Stock #131-00177.
In real estate it’s location location location, when it comes to coloured gems it’s all about the colour. Other characteristics play a less important factor but by far colour is the most important detail, and you don’t need to be an expert to recognize great colour. Our latest sapphire and diamond ring has that illusive cobalt blue hue that only the best sapphires will exhibit. Clarity isn’t too important when valuing a sapphire or other coloured stone but a good transparency does help showcase a desirable colour. A reasonable cut makes the most of the unique optical properties of different types of coloured stones. The emerald cut shape is very unusual to see in sapphires.
Step cuts like this are only seen in around 10% of sapphires in the 1.00 to 2.00 carat size range. This one measures 5.7mm x 5.3mm x 4.2mm and has been calculated to weigh 1.27 carats. The two round brilliant cut natural diamonds on each shoulder weight a little over half in total and are conservatively graded SI1-HI. The setting has been crafted in 18 karat white gold for a finger size 6. The fit can be adjusted up or down a size or so. Fancy wire gallery settings are reminiscent of a tulip blossom and allow easy access for cleaning while providing a delicate look and excellent security.
All 12 claws securing the stones have been expertly rebuilt to a very high standard at some point. The shank bottom is showing some thinning from decades of wear, but vintage 18 karat white gold alloys are very hard and much more durable than modern nickel free blends of gold. We estimate this ring is around 70 years old. It was a cherished possession and worn day in day out for decades. As such the sapphire is showing some wear and tear on the facet intersections and a very thin scratch on the table surface.
These minor blemishes are difficult to see except under close scrutiny. A simple repolish by an experienced lapidary would easily bring it back to perfect condition. This is one of the best colour sapphires we have ever had the pleasure of showcasing.
All these images are not enhanced in any way and were taken with an old point a shoot Nikon Coolpix S9900 digital camera in fully automatic mode. It comes with a 2019 GemTech Toronto appraisal and our matching blue presentation box.
The colour is truly that good. This difficult to replace sapphire and diamond estate ring is estate priced at $2,800.00 CAD. Stock #206-00597.
SOLD
Everyone needs a praying guardian angel to look out for them. This little guy has been embellished by the addition of 70 tiny diamonds set in his wings and the bail. We do mean tiny when we’re describing the diamonds. They are not chips but properly cut round diamonds, each one with 17 individual facets on the crown and pavilion. The 70 diamonds weight an estimated 0.125 carats in total. These diamonds a so small it would take over 500 of them to equal 1 carat in weight! The diamonds are light but the pendant is quite heavy weighing in just under 11 grams.
It is in like new condition showing no wear and tear. The large hinged bail allows almost any size chain or cord necklace to pass through. Chains up to 7mm should be able to be worn with it. The pendant could also be used as a fob on a key chain or bracelet as a good luck charm. It is of contemporary manufacture with a curious network of gold wires on the back.
These wires add some extra weight, but are not necessary for strength as this pendant weighs much more than you’d expect. Given the current price of gold at around $3,600.00 per ounce, you’d expect this pendant to weigh a lot less. It could have easily been made using half the gold and would still have been a quality piece of jewellery. This inspirational angel is estate priced at $980.00 CAD. Stock #161-00279.

There’s money to be made with these coins if you have the time and want to sell them in smaller quantities, if you resell them immediately. There is also money to be made if the price of silver continues to appreciate like it’s been doing lately. There are 318 one ounce fine silver $5.00 maple leaf coins of 99.99 purity in this collection. They date from 1988 to 1997. 85% of the coins are from 1988 and 1989. All but 1 of the coins is still in the original Royal Canadian Mint sealed plastic packages. Most of them are in sheets containing up to 10 coins.
Perfect condition, sealed, vintage silver coins are almost never seen, especially in decent quantities. If we had the time, we’d sell these off one at time for far more than just 10% over their silver content. The only reason we are offering these at the spot price plus 10% is that they take up too much room in our safe. They should all fit inside a regular sized shoe box. If you remove them from the plastic they will occupy quite a bit less space. The 318 coins weigh close to 10 kilograms in total (actual weight 21.9 pounds). For an up to the minute idea of what the silver market is doing for price click here. These coins are not subject to sales tax. Canadian maple leaf silver coins made by the Royal Canadian Mint are internationally recognized as one of the most desirable and trusted forms of bullion in the world. We’ve never had a collection like this before and don’t expect them to last very long. Do a bit of homework and find out what vintage Canadian silver maple leaf coins from the 1980s are selling for, then decide quickly if these coins would make good investment for you. All or none, please don’t ask to buy or select only a few. They are being sold as a collection of 318 for just the value of silver they contain plus 10% with no additional sales tax. For NON cash/debit/e-Transfer purchases please add 2% to cover credit card fees. Stock #912-00725.
SOLD
There is so much white gold being sold now I thought it was time for a change. So here is a very traditional yellow gold solitaire engagement ring. 18 karat yellow gold offers a rich colour that is unique in the world of modern white/grey jewellery metals like silver, titanium, stainless steel, cobalt, and tungsten carbide. Besides the pinkish hue of copper, gold is only other coloured metal. The traditional beauty of the rare yellow metal is becoming popular again as people are rediscovering why it has been so cherished for thousands of years. This ring is very well made and weighs over 4 grams including the platinum head. The excellent cut 0.31 carat round diamond is a very good SI1 clarity with a little bit of a warmer “K” colour. The flat edge design is very easy to match with a wedding ring or anniversary ring. Measuring a size 8 this ring is a little larger than most but can easily be sized down in a day or so by our on-site goldsmiths. A new 18 karat/platinum ring like this could easily sell for over $200.00 per gram not including a diamond. Estate priced at $840.00 CAD. Stock #e8411.
We’ve been selling and servicing pre-owned and vintage Rolex watches since the late 1950s at Bill Le Boeuf Jewellers. Bill Le Boeuf was a certified watchmaker long before he opened his store here on Dunlop Street in DownTown Barrie in 1958. This is the type of Rolex he would have seen as a young man new to industry in the 1940s. Relatively simple, hand wind timekeeping technology like this was pretty much state of the art back then. No automatic winding, no shock protection, seldom a calendar display, or any other complication, and certainly no hardened lab-grown sapphire crystals, or high tech ceramic dials and bezels. A water-resistant stainless case with a threaded crown and case back was considered the latest technology in the 1940s. In the mid 1930s Rolex annual production was only around 20,000 Oyster case watches per year. The brand was quite popular with military personal during World War II. The water tight Oyster case was superior to others when it came to protecting the delicate mechanical internal components.
After WWII production started to ramp up as word spread of the durable Rolex Oyster. By the late 1940s production numbers quadrupled and it’s been steady growth ever since. When Rolex decided to make it difficult to track production with the introduction of scrambled serial numbers in 2010 they were manufacturing around 1 million watches per year! This vintage Oyster Everest Observatory dates from 1948 according to its 555,429 serial number. It is a rarely encountered model and showcases an unusual hour hand and with red seconds hand. At first we thought the hour hand was a mismatch to the more traditional minute hand but we found other examples online with the same hand set made from blued steel.
The dial features alternating Arabic and hash marks plotting out the hours, while a connected minute track frames the outline. An even parchment patina across the dial appears appropriate for the age, crisp and sharp text leads us to believe this watch is mostly original. Our watchmaker performed a full overhaul to the 17 jewell calibre 710 in July 2025 and has it running great and keeping good time.
One thing we couldn’t keep original was the threaded crown. The inner threads were worn out, so we had to replace it with a generic version.
The unusual cushion shaped case retains its sharp edges and is also thought to be original, although it does display scuffs and scratches picked up over the last 75 plus years.
The plastic crystal shows minor crazing but is still intact. A good quality 18mm Hirsch black leather strap has this watch in ready to wear condition. We are happy to provide the next owner of this watch a complimentary one-year warranty. Estate priced at $4,000.00 CAD. Stock #505-00084.
Mokume-gane is as exotic as it sounds, originating in 17th-century Japan “wood-grain metal” or “wood-eye metal” was developed by master metalworker Denbei Shoami, for the creation of decorative sword sheaths and handles. With the banning of public displays of samurai status in the late 19th-century, mokume-gane artists redirected their skills to the creation of other decorative pieces. The process of creating mokume is comparable to the creation of Damascus steel. Sheets of precious and semi-precious metals are laminated in layers, creating a bilet.
The metals are sweat-soldered or fused together, compressed, cut in half, layered again until the metalsmith gets to the desired number of layers. The billet is then patterned by a process of engraving into the surface, then flattened out again, repeating this process multiple times to increase the grain of the metal. The real magic of mokume comes with time, as the finished piece consists of different metals with different hardnesses daily wear removes some materials faster than others, creating an undulating surface that gets more exaggerated over time; the same wear you see in real wood as it weathers. This unique quality of improving with time makes the metal a perfect metaphor when used in wedding bands.
The mokume-gane we present today is a matched wedding set, with the engagement ring and wedding band cut from the same billet of silver and 18 karat white gold. The matched set both feature channels of diamonds running their top thirds. The engagement ring is crowned with a 0.64 carat round brilliant cut diamond of bright I1-J quality. Paired with the 17 accents the set comes to an estimated 0.90 carats in total weight. The wedding band measures 4.2mm wide and the engagement ring 3.2mm wide, both currently measure a finger size 5 1/2 with some room to adjust, though it will disturb the pattern. Estate price for the set only $2,800.00 CAD. Stock #e14210.
Tiffany have a knack for producing silver jewellery with unique designs that stand the test of time. Their “Return to Tiffany” line of charms and pendants for bracelets and necklaces have been a huge success and continues to be very popular. Made from 92.5% pure silver these 3 bracelets are at very attractive price points considering they are from the world’s most famous jeweller.
A new Tiffany silver bracelets will cost you a minimum of $300.00, these versions have replacement values of much more that that. These bracelets came to us together from a previous owner who had a small wrist. The longest of the 3 only measures just 7 inches, the lady bug with 18 karat rose gold trim is just over 6 inches long.
We can always extend the length but these are ready to go for the thin wrist lady. Tiffany bracelets are very popular with our estate customers, often selling before we have a chance to post them. Each one comes with that distinct turquoise/blue travel pouch.
You can take you pick of any one for $200.00 CAD. Stock number 651-00166, 651-00167, 651-00168.
SOLD
Different strokes for different folks I guess. Personally, it’s hard for me to understand but believe it or not there are some people out there that have zero interest in a nice watch or a great piece of jewellery. I realize luxury items are not basic necessities of life like food or shelter, but they sure have an effect on how you feel. Being confident and feeling good are certain to produce positive results in your life. The shine of a beautifully cut diamond ring sparkling in the sunshine; watching the smooth fluid motion of a finely tuned mechanical watch leave many with a strong sense of pride. It’s a feeling that’s hard to describe to those who don’t understand. For some, maybe a well tailored suit does the trick, a clean and shiny car might work, or maybe a beautiful new dress and fresh hair style produce similar results.
This late 2009 Rolex Datejust II should bring that feeling to next owner who has been thinking of a luxury watch. It was delivered to a Canadian authorized agent in December of 2009 and worn off and on by the previous owner.
It displays minor wear in the form of light scuffs and scratches on the case and bracelet, with slight softening of the sharp edges on the solid 18 karat white gold fluted bezel.
The Datejust II is a more contemporary 41mm diameter version of the traditional 36mm Datejust size. The larger size is what consumers have been asking of Rolex for quite some time. The more sporty oyster bracelet should appeal to someone looking for a simple, functional look. The locking buckle is equipped with a hidden extension link allowing 5mm extra room for those hot and humid days.
Our model 116234 comes with the upgraded 18 karat white gold bezel and uncommon factory applied diamond hour markers providing some subtle extra bling. It has some extra sparkle but the tone of tone combination is still subtle and sophisticated. This model has been retired and replaced with a slightly softened Datejust 41 with thinner lugs and a thinner bezel. The replacement model (126334) comes with a Canadian retail price of $16,350.00. With speculation of Canadian price increase coming, our price of $14,500.00 should have this watch on the wrist of a new owner in no time. This Rolex comes with our complimentary 1-year warranty, the original box and fully endorsed Canadian warranty card. Stock #505-00565.
We’ve featured several Spence Diamond engagement rings in the past but this is the first fully custom creation we’ve had of theirs and we have no complaints! The ring is made to the high quality that you often find with one-of-a-kind pieces. It is about as solid as they come, with only the tiniest drill holes under each diamond to assist with cleaning. The 11.8mm wide band holds its width all the way around making it as sturdy along its bottom as it is across its top. That digit dominating width does require some special consideration when assessing the finger size.
Though it measures a 6 that width will make it fit much tighter on the finger, requiring as much as half a size or more of fit additional room depending on your finger shape. The ring’s top half features a criss-cross pattern of carved gold with four of the strands set with diamonds. Together there are 40 round brilliant cut diamonds equalling 0.416cts together of SI2-I quality. The 14.6 gram ring is accompanied by its original invoice stating a sale price of $2,994.00 CAD back in June 2015. Our estate price is $1,750.00 CAD. Stock #131-00153.
We’ve had rings inspired by Rolex designs before, but this is the first time we’ve ever seen high quality bracelets that look like the famous Rolex President bracelet. These premium quality 18 karat yellow gold bracelets are virtual clones to the original, right down to the removable links that are secured by finely machined screws.
The links are interchangeable with the originals from the watch should you need an extra link for your Rolex. The super secure folding buckles operate exactly the same as the one on a lady’s gold Datejust or gent’s Day-Date from the 1980s until around the turn of the millennium. 
Both buckles secure tightly shut with a satisfying click. Bracelets like this a very elaborate in construction unlike a simple curb or Cuban link design. As such they are much more expensive to manufacture, if your only criteria is the purchase price per gram.
They are both in like new condition, and have only been occasionally worn. They show only the slightest amount of sag with no stretch of any kind.
The narrow example measures 10.5mm wide, 18.5cm long (7 1/4″), and weighs 45.8 grams. The gents measures 16.2mm wide, 21.5cm long (8 1/2″). They make great accessories if you have a naked wrist that could use a little decoration. They are estate priced at $12,500.00 CAD 441-00309 and $7,175.00 CAD 441-00309.
Ladies has been sold.
What do you do when you lose a single earring from a set? Well, if the style permits, turn it into a pendant. All we had to do was cut off the earring post, laser weld a small ring to the to outer edge and attach a large bail. Voilà, we have a brand new/estate pendant. The bright green emerald was just too pretty for us to take out of the setting and wait until we needed it for another project. The popular halo design is a customer favorite and we expect no different with this pendant. The emerald is framed by a thin halo of bead set round brilliant cut diamonds measuring only 1mm diameter. They are small but of decent SI-HI quality, providing a subtle sparkle and contrast against the bright green emerald. The large white gold bail allows a variety of chain style and weights to easily pass through.
Emeralds are almost always very highly included to the point of becoming opaque quite often. This one is far from perfect clarity but it is better than most and makes the most of its brilliant cut faceting pattern. For a natural emerald with natural diamond accents in 14 karat white gold, it looks far most expensive than the price suggests. The pendant measures 8.2mm in diameter and weighs a little under 1 gram including the gems. The snake style necklace we have pictured with the pendant is not included. Perfect condition and estate priced for the pendant only $350.00 CAD. Stock #231-00303.
SOLD
Often with channel set anniversary bands there is a limited amount of room for changing the finger size, due to the diamonds sitting so close together. Sizing the ring up brings the diamond closer by reducing the curve they’re on potentially causing damage. Luckily we have such a variety of estate channel set anniversary bands we likely have one in the finger size you need, or close enough to adjust. This band in particular is a slightly larger size 9. Made from 3 grams of brightly rhodium enhanced 14 karat white gold. We have opted to leave it in its unpolished condition. We can do a complimentary full refinishing in about 5 minutes if you wish. The top half is set with 0.55 carats of well matched I1-HI round brilliant cut diamonds, 12 all together. The ring is accompanied by its original Gem Scan summary evaluation wallet card (April 2013). Estate priced at just $770.00 CAD. Stock #e11401.
We’ve been Simon G fans since we brought the California designers line to the Barrie area at least a dozen years ago, their offerings of bridal jewellery was a perfect fit for us. Most of their pieces take inspiration from the Art Deco period so you can imagine why we’re smitten. This more modern example shows its historic leaning with a delicate edge of millgrain. That almost matte finish really brings out the intense yellow tone of the 18 karat gold setting.
It creates a contrasting backdrop for the 24 round brilliant cut diamonds that cover 3/4 of the ring. The 0.27 carats total weight are of Simon G’s typical VS-FG quality, showing their high cut grade through intense fire despite their delicate size. The 0.52 carat centre diamond has been proudly set into a six prong white gold head. It is an eye-clean SI1-J and faces up whiter than you’d expect thanks to the warmth of the ring and its ideal cut.
This is a piece we originally put together in 2013 and it comes with all of its original paperwork. Normally semi mount MR 1546 comes in white gold and is currently available new (without a center stone) for $2,574.00 CAD. Our estate price including the center diamond is only $2,400.00 CAD. Stock #e13215.
Toward the end of the last century Omega experimented with a hybrid quartz technology. The system mirrored the weight rotor like a traditional automatic watch, but instead of winding a spring, it turned a generator that charged a capacitor. The capacitor powered a fully jewelled high quality quartz movement for 100 hours without additional motion. The electronic circuit can detect when power is low and signals the wearer with a second hand that only impulses every four seconds.
Omega only offered this technology for several years before abandoning it in favor of fully mechanical automatics and more traditional battery operated quartz movements. They really gave it a go with this model adding a one direction timer bezel, threaded crown/case back, date magnifier (à la Rolex style), applied luminous hour markers with Arabic 6,9,12, a wave patterned dial with concentric ring minute hour track and glossy minute track.
The sliding locking buckle even features the luxury touch of a solid 18 karat gold Omega logo insert.
The basic watch looks a bit like a Rolex Explorer but offering far more utility. It even came with a water resistance rating of 200 meters, twice that of a Rolex Explorer. This watch was sold new right here at Bill Le Boeuf Jewellers in early 2002 when we were authorized agents for Omega watches. It comes with the fully endorsed warranty card and a photocopy of the original bill of sale.
The watch was fully overhauled at Omega service facility in Toronto in 2024 and has hardly been worn since. They serviced the movement, replaced the crown and waterproof tube, changed various seals/gaskets, installed a new circuit with updated capacitor, microgenerator, reverser wheel, date driving wheel, new rotor, and finally every bracelet pin and bushing were changed. This full restoration was reasonably priced at $603.99 including shipping and tax.
With the fresh service it should run trouble free for the next few decades. A two year factory service warranty will be transferred to the next owner. A service box, original instruction booklet, other documents, replaced parts, cards, and more are included with purchase. This 2 owner watch now looks like new and operates like new. It is estate priced at $2,800.00 CAD. Stock #510-00101.

This is one of Omega’s most audacious watch experiments, at least when it comes to the metals they selected for its construction. The 300 Professional series was introduced in 1993 and was an instant success with Omega customers. It was half the price of the Rolex Submariner but offered the same performance with extra features.
You could get it quartz or automatic chronometer, lady’s size, and two men’s sizes. It came in stainless steel, two-tone, solid gold, titanium, with a bracelet or on a rubber strap. This version was by far the most striking and unusual. A close look reveals the grey titanium, 18 karat red gold, and the usual bluish/grey mystery metal. The curious coloured metal used between the red gold stripes in the bracelet and in the bezel is tantalum.
Tantalum is very hard, dense, ductile, is easily machined, and is highly conductive to electricity and heat. It resists almost all forms of chemical attack and has a melting point of over 3000 degrees Celsius! I don’t know why we don’t see more luxury watches made from this material. The rest of this Professional is exactly the same as any other 300 meter chronograph from the series.
Our watchmaker just performed a full overhaul to the modified Valjoux 7750 chronometer movement. The service also included a new original chronograph pusher, vacuum testing, and regulating to chronometer accuracy.
The watch is in well worn but good overall condition. It appears to be in unpolished condition, showing little bracelet sag.
It comes with its original packaging, instructions, documents, warranty (note been filled out), and even the original hang tag.
When we were authorized agents for Omega we only sold this model a couple of times by special order only. At the time it cost more than twice the price of the basic stainless chronograph. Including our 1 year warranty, this rare and unusual Seamaster is estate priced at $6,000.00 CAD. Stock #510-00185.

The advantage of having a tiny finger is that small hands can make a diamond like this one look much larger than it is. Not that this 0.64 carat I2-IJ round brilliant cut really needs the help as its been shouldered by a row of bead set diamonds edged in high polished white gold. The impression is a ring top covered over in diamonds that twinkle at the slightest movement. The intertwining undergallery has even been set with two petite diamonds. The engagement ring is accompanied by a matching wedding band that takes the total weight of the set to a perfect 1.00 carat. The 14 karat white gold 5.2 gram pair both measures an extra petite 4 1/2 with some room to adjust. Estate price $1,500.00 CAD. Stock #e13337.
An ever so slightly more decorative version of the traditional marine link, mixing things up with two bars per link instead of one. Yes, it’s a bold move but fashion is for the brave. If you’re feeling up to the challenge this 9.1mm wide by 8 1/2 inch long bracelet is quite the statement. Partially due to its white gold nature, a rarely encountered gold colour in heavy gents pieces. Too bad as the contemporary tone stands out more during wear. This piece is solidly constructed from 32.1 grams of 14-karat white gold that retains most of its original chromy rhodium finish. The clasp is a sleek hinged lobster clasp that locks into a sturdy stylized end cap. The estate price for this like new piece is $3,600.00, CAD. Stock #e13222 441-00056.
SOLD
A multi-stone cluster offers a combination of low price-point and large footprint, creating the look of a single larger diamond at a glance. This oval cluster spans 10.2mm long by 8.7mm wide and meets with diamond-encrusted twisting shoulders. All told the ring has been set with 68 round brilliant cut I1-I quality diamonds equalling approximately 0.33 carats total weight. The 10 karat white gold currently measures a finger size 5 with some room to size up. Estate price $560.00 CAD. Stock #e14106.
Certified December 5, 2019 at The Gemological Institute of America with very nice results of VS1 clarity, F colour, no fluorescence, good polish, and good symmetry. The full report can be seen online here.
The diamond is currently set in a simple, elegant, platinum setting with 2 slender baguette shoulder diamonds. A more thorough description of the finished ring and diamond can be seen on our website here. Stock #e12943 101-00284
Viewing by appointment only.
Charriol is a luxury brand from Switzerland that produce fine quality jewellery and watches. They have been around for over 40 years with designs that feature inspiration from traditional Celtic styles. You’ll see knots, rope, and braided patterns throughout their jeweller and watch lines. Our latest estate piece is the first Charriol that we have showcased. The 18 karat white gold bracelet stays true to the tradition with a repeating pattern of oval rope links alternating with circular links that are pavé/bezel set with full cut diamonds.
Quality is the order of the day with this Charriol piece; it is constructed from premium 18 karat white gold and the diamonds are a conservative VS-I. Despite the light airy look the bracelet still weighs over half an ounce at 16.1 grams. The 70 diamonds are calculated to weight 0.50 carat and consist of round and square brilliant cut natural stones. The bracelet measures 7 inches long and 9.7mm wide.
It is secured by a signed fold-over clasp that snaps securely shut with a reassuring click. Having a look through Charriol’s website shows mostly “Yurman esque” 18 karat bracelets with small diamonds. They are only offering one loose link design retailing at $13,300.00 CAD. Our estate Charriol is in like new condition showing no wear in any of the joints. The factories original bright rhodium plating is fully intact except on the buckle edges where it is beginning to wear thin.
This bracelet is estate priced at $3,000.00 CAD.
It can take decades of marketing for a brand to become synonymous with a look. In the automotive world, the Porsche 911 comes to mind. Whether it’s a 1973 or 2023 model year, the stylists are careful to retain certain elements of design that define the look. In the watch world, the Rolex Oyster is one such watch, for Omega it’s the Constellation.
For over 40 years the flagship Constellation has had a look with design components consistent with the original 1982 Manhattan model. The 4 claws at 3:00 and 9:00 o’clock, Roman numeral bezel, and integrated bracelet have always been used in one form or another.
This watch was purchased new from Bill Le Boeuf Jewellers October 22, 1999 when we were authorized agents for Omega.
All the original documentation for the watch including the fully endorsed warranty card and chronometer certificate are included. The watch shows scratches and scuffs on the bracelet, case and bezel from everyday use but it is 100% original. No polishing or refinishing has been done since it left the Geneva factory.
The Constellation has been the flagship model within the Omega family since they were introduced in 1952. The automatic winding movement inside the case is Omega’s 1120 chronometer.
It is running great and keeping excellent time after full service in the winter of 2023 (copy of our work order is included).
These are uncommon watches today and seldom show up in our estate department.
This more rounded design was first update of the original 1982 Manhattan design. Over 40 years later, Omega still makes a 36mm Constellation that looks very similar. Model 131.20.36.60.02.002 is the current version and comes with a retail price of $9,100.00.
Including our complimentary 1-year warranty this 2001 Omega Constellation is estate priced at $3,500.00 CAD. Stock #510-00188.
This ring is a study of squares, from its rectangular diamond-set under-gallery, to its almost square 7.4 x 7.7mm halo the ring is all edges and corners. The main diamond is of course a princess cut diamond proudly set into that decorative halo.
The 19 I1-I diamonds in the ring equal about 0.25 carat together. The 14 karat white gold ring currently measures a finger size 7 with room to adjust. Estate price $476.00 CAD. Stock #101-00219.
A 0.17 carat SI1-HI round brilliant cut diamond never looked better than this. The simple low “compression” look setting made from 14 karat white gold weighs 3.2 grams and is in perfect condition. Size 5. Estate priced at $490.00 CAD. Stock #e7057.
As a group, we’ve developed several theories around this truly one-of-a-kind talisman. The first is that it’s a Wiccan Athame, a ceremonial blade used to cast a circle and summon or banish spirits. This theory comes mostly from the lot of highly symbolic metaphysical pieces that this pendant came from. Each was deeply steeped in meaning and most leaned toward the Neopagan. The second is an Excaliber association which is mostly drawn from the dragon that decorates the hilt. Whatever the origins, this ceremonial dagger or wand was certainly built to be powerful! Measuring just over 5 inches long and consisting mostly of a clear rock crystal pillar (another powerful Neopagan/Wiccan implement).
The 14 karat yellow gold top features a twisting hilt and Sai-like prongs (an ancient Japanese dagger), partnered with a European-looking dragon.
The hilt is accented with diamonds, sapphires, rubies, and emeralds but the real show-stoppers are a large oval jelly-opal and a bezel-set rainbow moonstone.
Both gems play on the rainbow dispersion that flashes along the quartz crystal while it rotates. That pillar represents spiritual growth and enhancing psychic abilities, the rainbow moonstone strengthens intuition and psychic perception, jelly opal represents perseverance and stability.
All of this meaning is secured by an oversized bail that should fit over most chains. The piece is accompanied by a May 2018 Harold Weinstein LTD. appraisal stating an estimated value of $7,500.00 CAD. Our estate price for this weapon of spirituality is $2,100.00 CAD. Stock #231-00178.
A little Canadian number that Peoples Jewellers tags with; “Whether you’re celebrating an anniversary, a wedding or simply the love you feel for her, express yourself with a ladylike ring that will make every day special.” We couldn’t say it any better (obviously) and what else is there to say with a staple piece like a channel set diamond band. The 0.51 carats cover the top half of the finger in icy Canadian brilliance of SI-I-G quality. The 10 diamonds are each laser inscribed and come with a certificate of authenticity.
The ring itself is made from 2.2 grams of 14 karat white gold that currently measures a finger size 4 3/4. The ring is currently listed on People’s website on sale at $1,159.20. Our price $890.00 CAD. Stock #e12530.
From the sublime to the ridiculous, we have a little bit of everything in our ever changing estate inventory. Here is another item from the “now I’ve seen everything file”. This custom made honey bee ring was manufactured on a large scale, at least 2 times its actual subject matter size. The cute honey bee perched atop the pierced nugget pattern ring measures around one inch long with a wing span to match.
Honey bees are essential pollinators for much of the world’s food supply. Their populations are a concern for scientists that have seen declines due to pesticide use, loss of habitat. The wild populations of honey bees are of particular concern as their numbers have become unstable. Some farms in California bring in commercial hives to help pollinate their crops in case the local wild bees are unable to. This ring contains 29 high quality sparkling VS-SI-GH single cut diamonds that are bead set in the body of the cute bee. It’s eyes are fine quality bezel set emeralds that each measure 1.7mm diameter.
This ring is a size 11 1/2 but could be adjusted down 3 or 4 sizes without too much trouble. Even though the top half of the shank in this is pierced in a random pattern the ring still weighs in at a substantial 15 grams.
This ring is both high quality jewellery and part whimsical artwork. Although the style and subject matter make dating the production of this ring difficult we feel this interesting creation was handmade sometime is the 1970s. It is estate priced at $2,100.00 CAD. Stock #206-00412.
The versatility of gold makes it the perfect material to express a jewellery designers creativity. It easily blends with other metals to display different hues, can be polished, hammered, drawn, sandblasted, or brushed to display multiple finishes on the same piece. It is also malleable enough to easily set any gemstone. These estate earrings display many of gold’s wonderful attributes.
The mirror image design has a mostly hammered texture that has been sandblasted to accentuate the white on yellow contrast. The borders of the overlapping design are highlighted with over 100 small round brilliant cut diamonds that were each hand-set one by one. The earrings are secured with spring loaded wire omega backs with long posts.
This style of closure is easy to use as there are no fussy little butterfly friction backs, they are also quite comfortable applying pressure across a larger area on the back of your ear. They are of sturdy construction with a finished weight of 6.7 grams. They are also in like new condition. Estate priced at $1,540.00 CAD. Stock #151-00340
SOLD
A radiant cut is basically a square princess cut diamond with the corners cut off. This greatly reduces the chances of chipping one of the pointy corners, at the expense of a the extra weight that gets lost. This is one of the reasons a radiant cut costs a little bit more compared to a square princess cut. The truncated corners also allow for a much more discreet sized/shaped prong.
It’s a wonder we don’t see as many radiant cuts as we do princess cuts. This ring is the popular Lucida style setting with its trademark crossover gallery claws.
The example is notable because the shank is quite thin and delicate at 2.5mm in width. The European bottom is squared off to help keep the ring pointing up. There is a tiny surprise princess cut diamond Gypsy set into one of the bottom corners.
The centrepiece is of course the Canadian origin diamond with it’s unique laser etched serial number (ADURA IGI 30059583C). We don’t know much about the ADURA brand except this little snippet we found online “HRA Investments Ltd., has branded a multifaceted princess cut diamond brand called Adura. The Adura diamond, displaying a dazzling 85 facets is issued with a Certificate of Brilliance, illustrating the enhanced light return of every Adura diamond. Sun Gems International, will be the exclusive distributor of the Adura Brand that is marketed in Canada. Adura translates from Latin to “light on fire” which fits this diamond to a ‘T’.
Feel free to dive in that rabbit hole and let us know you found out about this specialty cut diamond. What we do know is it sparkles much better than most radiant cut diamonds as the cutting geometry is excellent, unlike most generic square cuts. The ring measures a size 6 1/2 and can easily be adjusted up or down. The diamond itself is calculated to weigh 0.76 carats of SI1 clarity with an H/I colour. This unique diamond solitaire is estate priced at $1,855.00 CAD. Stock #101-00526.
Simple design and high quality are always in style and never get old. Yes, this hinged bangle is hollow but don’t let that be a concern. The gauge of hollow tubing can vary from so thin it can’t even be polished for fear of putting a hole in it to several millimeters. The weight of this 14 karat yellow gold bangle is well over 1 ounce at more than 32 grams. If it was made completely solid, it would weigh close to 3 ounces and be almost too heavy to wear, and cost 3 times as much. The colour of this bracelet is not typical for North American or Italian 14 karat jewellery. It has a slightly greenish/yellow hue that is associated with a more silver rich alloy than those used domestically.
This alloy colour is often seen in Germany, there is a reasonable chance this item was manufactured in that part of Western Europe. Wherever it came from and whoever made it, they were very skilled at their craft. The hinge is very tight with no play, The plunger style clasp has been designed with 2 locking “clicks”. When the clasp is being closed you not only feel the locking tongue grooves, but you can easily hear them click with a loud auditory snap.
The sturdy clasp has been further augmented with a side safety clasp for an extra level of security. This bracelet only needed a light surface polishing and cleaning to prepare it for sale in our estate department. It remains in practically new condition. There are only a couple of very light dings on the sharp edges. The flat highly polished surface remains in dent-free condition. The bracelet measure 10.1 mm wide, 3.5mm thick, and just over 7 inches inside circumference. It is estate priced at $3,500.00 CAD. Stock #441-00203.

SOLD
As of this updated posting, the price for an ounce of gold is over $5,570.00 CAD. While you may think that is great news for jewellers, the truth is the input costs alone for producing jewellery are getting out of reach for many consumers by the time merchandise reaches display showcases. Our latest bracelet is a great example of the dilemma we are facing. This premium quality 18 karat gold bracelet weighs nicely over an ounce and is made from 75% pure gold worth over $4,250.00 in just gold content. This means we could simply scrap it and walk away with well over $4,000.00. If you had to buy a new one from the manufacturer, the cost would be around $5,500.00 (at wholesale). By the time the retailer applied a reasonable markup, expect to see a price of at least $7,000.00 for it; and the market for a $7,000.00 gents gold bracelet is much smaller than you’d imagine. It is easy to scrap things like this and move on, but we feel that would be a shame because many beautiful items such as this would then be gone forever and not be enjoyed. This bracelet measures 7.9mm wide and just over 8 1/2 inches long.
It will easily fit most women’s wrists or a slimmer gentleman. We gave it only a light polish to preserve the original finish, and retain as much gold as possible too. Ever time you polish your jewellery you lose a little gold. Even if you only lost 0.1 gram of 18 karat gold every time you polished your jewellery, you’d be losing $13.00 in gold at today’s gold price! We’re hoping to find this bracelet a new owner and not just melt it down into a pretty puddle. With that in mind we are offering the bracelet for just 15% above its salvageable metal content. If you’ve always wanted a high quality, well made, heavy bracelet, this one is a great value at only $4,900.00 CAD. Stock #441-00394.
You’ve picked your partner (or maybe they picked you!) and now it’s time to pick the bands. If you’re looking for a classic pair of bands it’s harder to get more timeless than these. The 14 karat white gold pair are both 7mm wide with low dome profiles and very unique karat stamps; both display a European 585 instead of the North American 14 karat and their maker’s mark is a person seated in profile in some manner of prayer or meditation.
Both came in high polished but we opted for a bit of personality by satin finishing one, if you feel like changing the finish of either one of our in-house goldsmiths can accommodate most requests in a day or two. One band currently measures a finger size of 8 1/2 and weighs 6.5 grams, the other measures 7 1/2 and weighs 5.9 grams. Both sizes can be adjusted in-house! The estate price for these rings is $595.00 and $630.00 CAD. Stock numbers 401-00152 and 401-00153.
Polished ring has been sold 401-00153.
Big diamonds are certainly exciting and very sparkly, but to get a good one of 5.00 carats or more is going to cost you over $100,000.00. Coloured gems like this incredible tanzanite offer a rich splash of colour that no diamond can match for a fraction of the cost. At Bill Le Boeuf Jewellers we get some nice sized diamonds from time to time but at an estimated 7.50 carats this rare stone makes quite a statement. The slightly violet royal blue colour is as good as it gets for tanzanite it’s a 10 out 10. The 7.8 gram 18 karat white gold cushion shaped halo setting is a very contemporary looking design that’s quite delicate looking with thin split shank shoulders and a filigree gallery. 60 diamonds in the halo and down the shoulders are of very good VS-SI-GH quality weighing an estimated 0.30 carats. Tanzanite is an incredibly rare gem compared to relatively plentiful diamonds, they’re only found globally in one location near Mount Kilimanjaro Africa and this source is not expected to last. The ring was purchased new in 2009 and has seen only occasional use. The only evidence of wear is a couple of tiny nicks on the table facet (just visible in the top photo). These miniscule marks can only be seen under extreme scrutiny and only the most sharp sighted. Ready to go in a finger size 7 1/2. The saturation and intensity of the violet/blue colour must be seen in person as my photography skills do not do this amazing stone justice. Finding another Tanzanite of this size, shape and quality would be next to impossible making this ring most likely a one of a kind creation. Estate priced at $8,050.00 CAD. Stock #e9258 206-00261.
When Cindy Crawford became an Omega ambassador in 1995 she was asked for some design input for the flagship Constellation model. The subtle modifications turned into a separate line of lady’s Constellations named, “My Choice”. Highly polished cases and bracelets, thicker non-tapered hands, pyramid-shaped and diamond hour markers defined Cindy’s look.
This example model 1475.51.00 comes with the upgraded full diamond bezel containing 38 round brilliant cut diamonds of VVS-G quality. Just like Cindy, this watch has aged very well. The highly polished case with a neutral colour scheme, and the sparkling diamond bezel look fresh and clean today just as it did 15 years ago. A 25.5mm diameter case size may be a bit smaller by contemporary standards but the dressy sophisticated look suits it well.
The low profile height of just 7.3mm makes has the watch looking a little larger than the size suggests. On a medium to slender wrist, the size is more than adequate. Highly polished reflective hands and faceted hour markers show great contrast making the watch quite legible. The Swiss quartz movement is running with the precision that Omega earned its reputation on. This watch was originally purchased right here at Bill Le Boeuf Jewellers in May of 2010. The previous owner was able to supply our old hand written receipt for the original purchase.
Omega still produce a 25mm Constellation. The closest match contemporary model can be seen on the Omega website for $7,500.00. The modern version features small diamonds on the dial with a basic Roman numeral bezel, for an additional $3,200.00 you can have the optional diamond bezel on the new model. Our 15 year old estate Constellation looks almost like new after a light polishing and ultrasonic cleaning.
The watch is running great and include a no-charge one-year warranty. This watch comes complete with all of the original packaging and documentation from when it was delivered new. The estate price is $3,300.00 CAD. Stock #510-00222.
SOLD
Top-quality tanzanite is really something that must be seen in person! Our 6.88-carat oval displays the best of what tanzanite is capable of, partially because we just got it back from our gem polisher after a cleanup on the facet surfaces.
The newly polished gem measures 13.35mm long by 10.80mm wide and is perfectly eye-clean. The very well-cut gem displays even flash across its surface and thanks to its trichroism morphs from vivid blueberry indigo to strong violet as it moves.
The ring that holds it was custom-made around it and opted for a warm 18-karat yellow gold four-prong setting to set off the colour of the gem. The rest of the ring is heavy white gold deeply channel set with perfectly matched VS-HI quality princess cut diamonds.
They equal approximately 1.00 carat in total weight and almost blend into the brightly rhodium-plated shoulders. The 11.3-gram ring currently measures a finger size 7 with some room for sizing. The estate price is $7125.00 CAD. Stock #206-00383.

This softly geometric solitaire is very well made with full shoulders and generous solid construction. It was originally sold in Canada by recently bankrupted now back in business Ben Moss Jewellers. One of the tell tale signs of mass production for the chain stores are hollow inside shoulders, thin shanks and generally light weight manufacturing. The hollowed out sections and light weight allow stores to cut costs and increase profits. This 3.4 gram 14 karat white gold engagement ring was left fully intact. Appropriately so as Ben Moss crowned the ring with a higher quality diamond than you’d normally encounter in the average mall store.
That 0.30 carat princess cut diamond is a bright and lively VS1-H quality of Canadian Maple Leaf origins. All Canadian diamonds have been laser engraved with a unique registered number and this example is no different. The elegant and understated solitaire is currently a finger size 5 1/2 with room to size up or down as needed. Estate price $980.00 CAD. Stock #e10623.
Platinum is an unusual metal for several reasons, the first (and one of its most sought-after features) is its heft, platinum is a denser metal than even gold, giving platinum an added bit of weight during wear. The second feature it’s prized for is its unique ability to stick to itself; when alloyed 10,14, and 18-karat gold gets scratched a tiny bit of gold is removed, but when platinum gets scratched the metal just gets pushed out of the way. This means that platinum can last many lifetimes whereas a similar item in gold will not.
Platinum also takes on a unique grey patina over time, we like to compare it to the timeless knight-in-shinning armor, once his metal is tested he proudly wears his dents and dings as proof of his valor. With wedding bands, platinum’s patina and propensity to hold its scars can be a lovely metaphor for the tests and challenges that make a marriage stronger. This pair of platinum bands are not a matched set and can certainly be sold separately, but we rarely get two in at one time so we are presenting them together. The smaller of the two is a low dome profile and spans 4.7mm wide, measuring a finger size 6 1/2. The larger is a two-tiered flat profile with comfort fit interior, spanning 7.4mm wide and measuring a finger size 9 3/4.
Both can be sized up or down as needed and changed from high polished to brushed, sandblasted, or any combination of finishes. They are being sold weight at a rate of $100 per gram. The smaller weighs 9.3 grams for $930.00 CAD and the larger weighs 18 grams for $1,800.00 CAD. Stock numbers 401-00215 and 401-00214.
Diamond bracelets have always been popular estate items. In fact, I wish we had more of them to offer but they don’t come in very often. So when one as pretty as this shows up it makes a welcome addition to our estate jewellery collection. The Art Deco design is very apparent with the geometric shapes found throughout. 17 old mine cut and European cut diamonds ranging in size from approximately 0.18 carats to over 0.30 carats are bead set along the entire length. With an average quality of SI2-I1-JK they sparkle with a unique combination of brilliance and dispersion only made possible by antique diamonds. Old mine cut and early European cut diamonds have very small table facets and tall crowns. This combination promotes the break up of light causing a more colourful display of sparkle when compared to a modern brilliant cut diamond. The 17.1 grams bracelet is of a standard 7-inch length. A tight fold-over clasp with a safety chain ensures the bracelet will stay on your arm. A December 2001 appraisal is included with purchase that describes the handmade bracelet estimating a total diamond weight of 5.75 carats. Our opinion of the total weight is a little more conservative at approximately 4.00 carats. Excellent condition showing no worn links or joints. Estate priced at $4,830.00 CAD. Stock #171-00025 e8921.
This ring looks like it’s come straight from the Tower of London thanks to its over-sized Mabe pearl center. The ring measures a head turning 20.3mm wide, taking over an entire digit during wear.
The high half dome pearl has almost a smoky body colour and displays a mostly blue and green orient with a bit of pink. The pearl has been collared with 26 SI-J quality round brilliant cut diamonds that equal about 0.50 carats in weight. The 9.7 gram ring is made from warm 14 karat yellow gold and currently measures a finger size 8 with room to adjust. Estate price $1,400.00 CAD. Stock #206-00224 e13332.
“Branding” is the new way jewellery and retail in general is being marketed to you the consumer public. Although we do carry some brand name items, we’ve always focused on the value of our offerings, not just promoting the latest trendy brand name. Educating clients and thoroughly explaining our products are details far more important to us than a slick marketing campaign or questionable sale promotions. Glacier Fire is the house brand for Canadian retail chain Charm Diamond Centres. This example is nothing but high quality as it was manufactured using premium 18 karat white gold and contains a very nice Canadian mined diamond.
The simple Lucida setting weighs 3.9 grams in its current finger size 5 3/4. It contains a beautiful 0.36 carat, SI1-G round brilliant cut diamond with an ideal cut, excellent symmetry and polish as described in the included International Gemological Institute report.
The diamond ring also comes with a lovely hinged wooden box containing an “ideal scope” loupe. This little tool allows a filtered magnified view of the “hearts and arrows” pattern all excellent cut round diamonds display. The November 2005 certificate of origin declares the diamond is a product of the Northwest Territories and entirely cut and polished in British Columbia Canada. A unique registered number appears on this certificate, the accompanying appraisal and has been permanently laser engraved on the girdle of the diamond.
The IGI’s idea of a replacement value as stated on the certificate of valuation is $3,250.00. The excellent condition ring looks great. All that is required to make it look like new is a fresh rhodium plating after it’s been sized (if necessary). We have the ring and all its accessories estate priced at only $1,400.00 CAD. Stock #e10754.
This swopping swirling decorative head is a graceful meditation in metal, drawing the eye towards the diamond that crowns the ring. Not that it needs much help, weighing in at an even 1.00 carat weight and a pleasant I1-I quality. The grade setting inclusions are only visible without magnification to the sharpest eye and under very close scrutiny.
For the normal-sighted, they will not be visible without magnification. The 14 additional diamonds that cascade down the ring’s shoulders are bright SI1-I quality and bump the ring’s total weight up to 1.50 carats.
The ring itself is in like-new condition, retaining its original rhodium finish over its 14 karat white gold. It currently measures a finger size 5 with a bit of room to adjust. The ring is accompanied by a GS Laboratories certificate stating an optimistic replacement value of $11,600.00 CAD.
We feel a realistic replacement value would be closer to $7,900.00 and our estate price $5,530.00 CAD. Stock #101-00407.
This fashionable bracelet looks like it has never been worn before. There isn’t a scratch or scuff anywhere on the surface. The black rhodium accent plating around the chocolate brown diamonds is fully intact, even on the tips of the prongs. Perhaps the previous owner received this as a gift and the style wasn’t to their taste, or it might have been a spontaneous purchase while on holiday that is now a second thought. The 5.8mm wide overlapping braid style has been a popular with our customers in both white and yellow gold. It is quite striking in rose gold especially with the contrasting fancy brown and white diamonds.
The little bit of copper used in the gold alloy produces this flattering blush to what would normally be a typical 14 yellow gold. Rose gold may not be part of everyone’s fashion pallet, but many of us love the soft colour. As an added benefit, the small amount of copper blended with yellow gold results in a harder metal, perfectly suited for use in a hinged bracelet. Well made in 58.3% purity 14 karat gold, this sturdy bracelet weighs in at 11.7 grams including the 79 round brilliant cut diamonds of I1 clarity, HI colour (white diamonds) and fancy brown (chocolate diamonds).
All the diamonds have been hand set in four prong settings, that are much more secure than a shared prong set up. The bracelet is fastened by a white gold plunger clasp that provides better spring with more security than yellow gold. There are no witness marks on the white rhodium clasp tongue confirming that this bracelet has pretty much never or hardly been worn.
A side safety clasp supplies an extra level of insurance against accidental opening. The hinge is tight and the clasp snaps shut with a reassuring click. Like new and estate priced at $2,940.00 CAD. Stock #171-00110.
Our showcases sometimes resemble a jewellery museum, with pieces spanning from the 1800s to the modern day. Many of the oldest pieces are brooches simply because of the nature of their wear. Pined to hats, scarves, across collars, or the lapel of blouses a brooch undergoes the gentlest wear of any piece of jewellery. Making them perfect time capsules as they almost always come to us in like-new condition. The antique bar brooch we are showcasing today is the longest we’ve had, spanning 3.87 inches from pearl to pearl.
Now we know the oxy-acetylene torch wasn’t invented until 1903 and took about a decade to work its way into popular use in the jewellery industry. This invention is important in ageing jewellery because this super-hot torch was needed to cast and properly solder platinum. Prior to its invention platinum could only be used as a thin applique on top of gold. That this bar brooch is made from platinum indicates that it obviously can’t pre-date the popularization of the oxy-acetylene torch. The brooch is set with gently graduating old mine-cut diamonds, the precursor to the old European cut, which was the precursor to the modern round brilliant cut.
Of course, we all know new technology doesn’t spread evenly across the world (how many of you know someone who still has a VHS player?) so old mine-cuts and old European cuts co-existed in the jewellery world for decades, with old mine-cuts finally phasing out by the mid-1900s. Meaning the 4.50 carat total weight of SI-I1-G-J quality diamonds doesn’t really help us narrow down the age of this brooch. The three button pearls that bracket the 20 diamonds also don’t narrow things down as pearls have been a jewellery staple for centuries. Our best guess, looking at style and technique, is somewhere around 1910 to 1920, making this brooch at least 100 years old. Sleuthing aside the piece is stunning, throwing broad flashes of white and every-coloured light at the slightest movement! The brooch is equipped with a hinged pin secured by a C catch with an additional safety lock.
The piece is accompanied by a 2018 Harold Weinstein LTD. appraisal stating an estimated value of $16,000.00 CAD. Our estate price for this piece of jewellery history is $7,000.00 CAD. Stock #181-00026.
Many companies choose to mark their anniversaries by drawing on the past for design inspiration. To commemorate the 140th year since the inception of Seiko in 2021, Japan’s most prominent manufacturer produced this retro styled Prospex diver.
It is influenced by Seiko’s first real divers watch, the 62MAS from the mid 1960s. The anniversary version is much larger at 40.5mm diameter to appeal to modern tastes but otherwise respects many of the design characteristics and aesthetics of the original. Naturally, 60 years of refinements and improvements have made this version a much more capable performer. Water resistance is up to an industry standard of 200 meters thanks to the screw down crown, the original only had a push in crown.
The sapphire crystal offers perfect optics and an exponentially harder surface. Improved luminous pigments allow use in low and no light environments.
The higher frequency modern automatic movement with hacking seconds should prove to be more accurate than the old 17 jewel mechanism with just 37 hours of autonomy. The modern calibre 6R35 features 24 jewels with a power reserve close to twice that of the original. For me a light coloured dial on a serious sports watch is always refreshing against the multitude of black and blue options. A shiny blue one way bezel (original was two way) is indexed 120 times for timing intervals of up to 1 hour in 30 second increments. The modern version sports a Rolex inspired Oyster style bracelet complete with locking buckle and a rather complicated diver extension.
Our watch remains in original unpolished condition showing little wear. There are a few light scuffs on the case and bracelet but nothing distracting. We suspect the lack of use by the original owner caused the hair spring to stick making the watch run very fast. A full service by our watchmaker in May 2025 has the watch running accurately and reliably.
It comes with the full packaging, documents, fully endorsed warranty card, bubble wrap, and even some case stickers. This watch is a limited edition but not too limited as Seiko produced 6000 examples. When new this watch had a retail price of $1,550.00, our freshly serviced, excellent condition estate example is priced at $1,000.00 CAD. Stock #501-00388.

This style wedding set is a great way to get the look of a 1.25 carat centre stone for a fraction of the price. Almost every traditional jewellery store you visit will likely have a version of this design. The details vary from store to store, but the theme is the same. The sets are organized by the total diamond weight of both rings combined into 0.50-carat total weight, 1.00 carat, 1.50 carat, etc… They always feature channel-set accent diamonds and an oversized head comprised of four invisibly set diamonds. Our newest example is a tidy 1.00 carat total weight version.
All of the diamonds are well matched SI2-I1-J quality. The rings themselves are 14 karat white gold weighing in at 6.0 grams for the set. The 6mm x 6mm top section gives the appearance of a 1.25 carat solitaire in the most convincing way.
Only under extremely close inspection do you notice the top is actually four smaller stones. The engagement ring is undoubtedly showy, sitting 7.3mm of the finger at its head. The wedding band matches the 3.5mm width of the engagement ring, both rings currently measure a finger size 7 with room to adjust up or down a size or two. The rings are sold separately as a set only for the estate price of $1,610.00 CAD. Stock #101-00345.
Just back from The Gemological Institute of America. We are super excited to be show you this natural fancy colour diamond weighing over 6 carats! GIA described its colour simply as “Yellow-Brown”, but there is so much more to it than that. The subtleties of colour are hard to describe especially in a sparkling diamond.
Our amateur attempts at this YouTube video do not truly capture just how pretty this diamond is, in person this diamond showcases a much more orange/peach hue. You must see this one in person. A high refractive index and rainbow dispersion levels that are unique to diamonds modify the body colour by throwing in sparkling twinkles of red, orange, yellow, green, blue, violet, and everything in between.
The soft earthy tone combined with the brilliance that only comes from a diamond results in an optical experience no ordinary coloured stone can compete with. The full August 8th, 2024 GIA can be seen online here.
The colour is by far the most important characteristic in this diamond . The carat weight came in at a robust 6.18. The I1 clarity reveals a crystal, a few feathers and several other minor inclusions. The grade setting inclusion looks a little like a crab if you use your imagination and squint a bit.
The cut grade is not commented on by GIA on colour diamond reports, but the depth of 62%, table of 62%, appropriate crown height/angle, and nice pavilion depth/angle would have it grading good to very good. The polish is very good, good symmetry, and faint fluorescence. While we hesitate to call this diamond a one of a kind, it certainly wouldn’t be replaceable. After scouring our database of over 500,000 diamonds and searching the internet, we couldn’t find a round diamond of similar size and colour anywhere. This vintage diamond is set in a classic platinum setting accented with 6 thin tapered baguette diamonds on the shoulders.
We estimate the baguettes weigh a combined 0.12 carats or slightly more of VS-H quality. The thin shank measures only 1.8mm wide, and the ring measures a finger size 8. This skinny shank design is right on point for modern tastes.
It’s flat edge will fit with almost any wedding band or anniversary ring. Placing an accurate value on a diamond ring like this is no simple task because comparables simply do not exist. The ring is accompanied by a 1998 appraisal from Ontario Gemological Service in London Ontario and another from D.C. Taylor Jewellers in Owen Sound Ontario from 2023.
We don’t know exactly how old this diamond and ring are, but the classic ring style has been around for more than 100 years. Based on the geometry on the colourful diamond we are guessing it dates from the around the 1960s. The hand made ring is in 100% original condition and shows only minor signs of use in the form of scuffs and scratches on the shank and claws. We decided to leave this ring showing its original patina. Our onsite goldsmiths can refinish it to like new in less than 10 minutes if you’d like it looking like new. There are no worn tips and the wire gallery displays no worn sections from rubbing against another wedding or anniversary ring.
For a diamond ring we think is at least 60 years old, it is in remarkable condition. The GIA report doesn’t document and nicks, chips, or scratches on the diamond surface. If you love the different and unusual, you must make some time to come and visit this spectacular natural diamond with natural fancy colour. Stock #101-00593.
Viewing by appointment only.
Simple and modern looking solitaire diamond ring containing one bezel set round brilliant cut diamond weighing approximately 0.45 carat of I1-H and a good cut. The 18 karat setting is well made and weighs 4.9 grams. This ring comes with an appraisal dated November 2000 and suggests a rather high retail replacement value of $3,000.00. We feel its approximate replacement value would be closer to $1,725.00. We have it estate priced at $1,200.00 CAD. Stock #e6489.
We are honored to showcase for you one of the most spectacular antique estate items we’ve ever had. Any combination of the components in this pendant/brooch is worthy of our admiration but to have everything come together in such a significant way is truly remarkable. It dates from the early part of the 20th century and each and every old European cut diamond is original to the piece. They are all of very high VS1-G or better quality. The 51 diamonds are estimated to weigh a combined 3.40 carats. Antique old European cut diamonds are uncommon to see in such high colour grades like these as South Africa (the main source in the 1900s) produced mostly diamonds in the IJK….. range of colour.
The skill and craftsmanship executed are as good as it gets too. Beautiful and precise stone setting contouring to each and every individual diamond’s unique outline produce an endless frame of antique brilliance and dispersion. The scalloped edge, platinum milgrain frame is delicate and crisp showing no wear of any kind. The clever engineering of the bobble allows use as either a pendant or brooch. An integrated brooch back can be removed for use as an unobstructed pendant with the removal of a threaded screw.
The diamond set bail can quickly be disconnected for use as a statement making brooch on a jacket or blouse. Of course, the most amazing part of the item is the 11.25 carat Ceylon (Sri Lanka) sapphire. Big diamonds are beautiful, often quite valuable and are easily obtained if your budget allows, but just try to find another medium violet-blue sapphire of this size. Now factor in this stone is easily over 100 years old and original with an old cutting style.
Add to that the sapphire comes with the most respected gemological report in the world from the GIA (Gemological Institute of America) that describes this corundum (aka sapphire) as completely natural, lacking indications of heat treatment. The full report can be seen online here. Almost all sapphires have been artificially heated to clarify and intensify the colour to a more appealing hue. With that being said, most commercially available sapphires are dull, dark and overly saturated with an inky dark blue colour.
The GIA report goes on to say the origin of this stone is Sri-Lanka (formerly Ceylon), one of the most desirable locations know for producing exceptional sapphire specimens. The stone exhibits the classic signs gemologists look for in natural sapphires. Perfectly intersecting silky inclusions at 60 and 120 degrees and distinct colour zoning can easily be seen under darkfield magnification.
Excellent transparency, even colour distribution, very well cut and its striking medium violet-blue colour that is simply incredible.
Sapphires like this just don’t come around. This is an opportunity for a true connoisseur of fine antique jewellery or the rare gem collector. We’ve had this pendant for a couple of years squirrelled away. 2020 has been a difficult year for everyone. We thought we’d showcase this sapphire as inspiration for better times to come. When I look at it I can’t help but marvel at the beauty of nature and the high level of skill of the unknown jeweller that produced it. One can only imagine and wonder about the fabulous life of the previous owner(s) who were gifted its care. For anyone who wants to see a rare and exceptional sapphire, we invite you to come have a look. This irreplaceable 10 gram, platinum, pendant/brooch is accompanied by an October 2019 appraisal by respected Toronto appraisal service Harold Weinstein Ltd. and the original copy of the February 2019 GIA New York report. Stock #161-00152 e12035.

Viewing by appointment only.
Pear-shaped diamonds offer an affordable option compared to premium-priced round diamonds. They are at least 20% less expensive yet look larger because of their slender pointed shape. It’s pretty difficult to get a nice looking round diamond approaching 2/3 of a carat for anywhere near this sort of price. The simple 2.8 gram 14 karat yellow gold setting is a classic design that showcases the pear-shaped brilliant-cut with its tapering “tulip” shaped shoulders. It’s a less is more look in a refreshing shape that your friends won’t have. When the time comes for a wedding ring the flat-edged design will open up hundreds of possibilities for wedding rings. No need to pay a premium for a custom-made interlocking design. The estate price for this cautiously graded SI2-JK 0.65 carat pear-shaped diamond ring is only $1,575.00 CAD. Stock #101-00013.
The Masterpiece is a Rolex unlike any other. From the large 39mm case to the unique Pearlmaster bracelet, this rare Rolex makes no excuse for its jewellery bias. Where the basic 36mm Day-Date can be purchased without diamonds in gold or platinum, the Pearlmaster 39mm was only ever offered with at least a diamond dial and diamond bezel.
The solid link bracelet is a distinctive design that falls somewhere in look between the sporty Oyster style and the dressier Jubilee variety.
We’ve featured many estate Day-Date Rolex models over the years in various configurations, almost all have been 36mm in diameter with President bracelets. This is the first time we’ve ever been able to showcase the rare and illusive 39mm Masterpiece. This example dates from 2006 and is in excellent condition.
It still retains the green holographic case back sticker and clear protective sticker on the integrated buckle.
We were very tempted to give the polished case and bracelet a light refinishing but decided to leave it in its original condition. It has only occasionally been worn and shows zero wear in any of its 14 solid 18-karat links.
The bracelet retains its full complement of 5 adjustment links and the bracelet has never been removed from the case.
The bezel contains 40 of the finest quality natural diamonds available. The diamonds are much larger than what you’d find on any 36mm Day-Date from the factory. Each diamond has been expertly hand set in 4 bead settings.
Together the bezel diamonds weigh an estimated 2.40 carats. The uncommon silver dial has also been enhanced with 8 single-cut diamonds and 2 baguette-cut diamonds in 18-karat settings adding just a touch more sparkle. Some extra diameter and solid construction can easily be felt as this watch weighs in at a substantial 209 grams.
The high initial cost and short model run make seeing a 18948 Day-Date Masterpiece very rare. An old Rolex price list we have from 2004 shows the basic Masterpiece in tri-colour gold with a retail price of $56,900.00 compared to the entry-level $29,130.00 36mm Day-Date. At 39mm in size, these watches were mostly worn by gentlemen. As modern tastes shifted to larger watches, more and more ladies are now enjoying this size. With a short production run and limited numbers made the Masterpiece is a rare Rolex that we may never encounter again.
This watch was owned by a long-time customer of Bill Le Boeuf Jewellers who traded it in for something different. It does not come with any original documentation or packaging. It is running flawlessly and comes with our complimentary 1-year warranty. Stock #505-00426.
Jadeite is a highly prized gem in the far east. It is of significant cultural value in countries like China where it is highly valued and said to possess many benefits. It is believed to fend off negative energy, promote good luck, and overall well-being. Many feel the beautiful translucent green gem has beneficial influence for clear thinking, emotional stability and enhancing creativity. Besides all that, in very good quality it comes in a calming cool green hue that is almost unique to precious jadeite. There are many other green stones that can be confused with true jadeite but they don’t have jadeite’s saturation of colour and toughness. This ring features a navette shaped cabochon cut jadeite measuring 12.2mm x 5.3mm x 2.6mm estimated to weigh 1.50 carats.
It is bezel set in a custom made 14 karat yellow gold ring weighing over 5 grams in a finger size 6.5. The jadeite is accented with a small round brilliant cut natural diamond on each shoulder weighing 0.015 carat of I1-H quality.
The ring and stones are in excellent condition showing little wear. This ring can easily be adjusted up or down a size or two to fit most fingers. Estate priced at $840.00 CAD. 206-00591.
We don’t toss out the 3-star ***rare*** headline very often. Rolex Oyster Perpetual 5501 is quite rare but one with a white honeycomb dial is exceptionally rare. With collectible Rolex, the dial is practically everything. The dial on this one is very original and in very good condition.
These textured Explorer dials with gold markers are thought to have been exclusively produced for the Canadian market. Even so, we’ve never seen another example of this dial before and likely never will see one again. According to the previous owner the watch was used for about a decade and then left in a drawer for the next 40 plus years. The watch is running great despite being quite dry. If it is to be used regularly we suggest a full service to the original 25 jewel Rolex calibre 1530. This service will be performed at no charge to the new owner.
The long term storage story seems to make sense as the inside case back shows only one or two service records. When a watch is serviced the technician usually etches a code on the inside of the case. The inside shows the usual Rolex factory stamping with production date code (1st quarter of 1961) but almost no other etchings.
It’s nice to see an original watch movement that hasn’t been messed around with. The watch came to us in what we believe to be its original and equally rare burgundy red hinged Rolex box. As the legend goes this watch sat in the box unused since the late 1960s. The condition of the box is practically like new. The red velvet display card with the Rolex logo is crisp and sharp edged.
Submariner, Daytona, and GMT-Master are the Rolex watches that get all the headlines. The smaller size 34mm Explorer models have always been a watch for the hardcore collector. I’m sure there are more than a few collectors looking at this watch that never even knew something like this existed. The dressy Explorer dial with 14 karat gold fluted bezel (also in great condition) set it apart as one of the rarest models you’re likely to encounter.
We love the rare 7205 riveted bracelet with 57 end pieces. As was the Rolex practice during the 60s these bracelet links were assembled from flat and folded sections of sheet stainless steel riveted together. The hollow nature of the design made them somewhat fragile and prone to dents and wear of decades of use. As Rolex manufacturing techniques improved these original bracelets were replaced with solid link versions. Most vintage Rolex have had their original bracelets replaced with modern replacements over the years. The buckle on this bracelet is date stamped 1967. Its condition is quite good for 52 years old. Showing a small amount of stretch, a little sage, and not too much lateral movement.
Including a one year mechanical warranty, the watch is estate priced at $19,460.00 CAD. Stock #e11829.

One of our favorite ring designs turned into a diamond bangle! The bypass style curls into a graceful wave crashing on to either side of the diamond trio. To keep that ellipse spirit the diamonds are sleekly two prong set. The trio equal 0.25 carats together of surprisingly high VS-H quality.
Keeping with that quality the bangle has been made from 11.2 grams of solid 14 karat yellow gold. It’s hinged on one side and oval in shape to ensure the bangle is always face up. The catch is an extra strong white gold tongue with additional safety lock for added security. Estate price $1,200.00 CAD. Stock #e12860 171-00010.
SOLD
The Rolex Air-King-Date was a favorite of thrifty Canadians since the model was introduced in the late 1950s until it was retired toward the end of the 1980s. It remains the only Air-King ever produced with an additional function to the simple 3 hand time display. From what we know, the Air-King-Date was only produced for the frugal commonwealth market.
It seems Canada and other commonwealth countries desired a date feature on our Rolex watches but didn’t want to pay up for a chronometer-rated mechanism that added extra cost. We see examples of these watches quite often around here but they are seldom encountered in major American and European markets.
This one is a local watch that was originally delivered in Toronto at an authorized Rolex in the summer of 1987. It remains in original, lightly worn condition. We don’t believe the watch has ever been refinished or polished. The sharp case and bracelet details are still crisp underneath the expected surface patina of light shallow scratches and scuffs associated with over 30 years of use.
The sturdy 13-link Oyster bracelet shows very little sag and no stretch.
The classic silver sunburst dial is absolutely perfect, there is not a blemish or stain to be seen. The no longer luminous tritium hour plots and 18-karat white gold hour markers are completely intact. The white gold hands appear original. The second hand shows some surface oxidation staining.
The threaded twinlock crown turns almost 2 full rotations before popping into the winding position.
The savvy Rolex collector will notice the vintage-look date ring with its “open” 6s and 9s. The bottom and top loops are not connected to the vertical component as you’d see on modern Rolex.
The buckle date code reads K9 which translates to an accepted 1986 production time. The 34mm case (34.4mm by actual measurement) is a versatile size suitable for men and women. This watch comes with its original endorsed warranty card, calendar card, and wallet.
The watch is running great and keeping very good time. Including a 1-year warranty (prorated 5 years), this uncommon Rolex is estate priced at $7,200.00 CAD. Stock #505-00379.
This is chain-making in extreme miniature! The basketweave of this 11.4mm wide band consists of 22 moving parts, each has been expertly hinged on three sides, allowing them to move up and down and side to side during wear. The yellow gold links and solid sizing section are highly polished, and the white gold links are brightly rhodium plated and feature a matte sandblasted finish.
The impressive ring weighs in at 10.6 grams of 14-karat gold and currently measures a finger size 7 1/2 with some room to adjust. The estate price for the like-new ring is $1,400.00 CAD. Stock #401-00198.
A classic high polished curb link bracelet is one of the most timeless accessories. This solid constructed 8mm wide version is appropriate for most ladies’ wrists, making a chunky statement but not so bulky that it can’t be layered with a watch or other bracelets. The 10 karat yellow gold piece measures 7 1/2 inches long and is secured by an integrated clasp. Estate price $1,200.00 CAD. Stock #441-00144 e13924.
SOLD
You simply can’t go wrong with the refined sophistication and classic appeal of diamond stud earrings. These stunning studs feature a total diamond weight of 0.62 carats, with each earring showcasing a dazzling 0.31 carat round brilliant-cut natural diamond of VS clarity — offering eye-catching sparkle while remaining effortlessly wearable. Crafted in 14-karat yellow gold, the warm tone of the setting beautifully complements the J/K colour of the diamonds, enhancing their natural radiance and creating a well-balanced look. The secure 4-prong settings ensure lasting durability, while extra-large, extra-heavy butterfly backs provide superior comfort and stability ideal for all-day wear.
Perfect for both everyday elegance or special occasions, the refined sparkle of these diamond studs exhibits timeless beauty at an exceptional value. Estate priced at $917.00 CAD. Stock #151-00353.
SOLD
It’s amazing how many brand new never worn engagement rings come in to Bill Le Boeuf Jewellers for sale or trade. Adding insult to injury many of these rings were purchased at stores that would not refund the poor guys their money or even a portion of it. This brand new never worn example was made from 4.2 grams of 18 karat white gold in a finger size 6.5. Channel set in the shoulders are 6 tapered baguettes and 4 small round diamonds of VS-SI-HI quality totalling 0.28 carats. Secured in a six prong setting is a 0.38 carat round brilliant cut diamond of excellent cut and SI2-F quality. If you have a close look at the claw tips they appear a little yellowish. The slightly yellow colour is visible because when the centre diamond was set the claw tops were polished removing the rhodium plating. We will size and re-rhodium plate the entire ring at no charge for the purchaser. And yes if you don’t get the answer you’re hoping for a full refund will be given. Nobody does I DO like WE DO at Bill Le Boeuf Jewellers. Estate priced at $1,638.00 CAD. Stock #e8287.
Seiko is perhaps the largest and definitely the most well known among Japanese watch manufactures. Many people think they have only been around since the popularization of electronic timekeeping in the 1970s, but they were established close to 150 years ago. The top of the line Grand Seiko compete nicely with the best from Switzerland with innovative technology and design. The Prospex line feature some impressive details at a price point under the flagship Grand Seiko models. Our latest estate watch is the Prospex Alpinist SJE085J1.
It is a recreation of Seiko’s first watch made for sporting pursuits. The Alpinist was originally released for the Japanese domestic market in 1959 to meet the needs of outdoor enthusiasts looking for robust design and reliable performance. The screw back of the original helped protect the movement from dust and debris. Four large triangular shaped markers at 12, 3, 6, and 9 o:clock represented mountain peaks and north, east, south, west, compass headings. The hands and all the hour markers were treated with highly luminous material for easy time interpretation day or night.
The recreation stays true to the original design and adds a few modern features for added utility and durability. A handy yet subtle calendar display discreetly placed between the 4 and 5 marker is a useful attribute. The dome crystal has the profile of the original but is made from super hard lab-grown sapphire with the benefit of an inner anti-reflective coating adding to the legibility. The modern watch comes with a water-resistance rating of 10 atmospheres (330 feet). Our watch is number 68 of only 1959 made for worldwide distribution. It was purchased in February 2022 at a Canadian authorized Seiko agent and comes with everything originally supplied from Seiko, right down to the tags showing the price of $3,725.00 plus tax.
The previous owner even kept the foam and paper box liners. As a bonus the original 2022 purchase receipt accompanies the package too. The 1st and only previous owner of this watch is an avid outdoorsmen and this watch was worn doing everything and anything. It remains in original unpolished condition. The factory delivered bund leather strap is wearable but well past its prime. A replacement should still be available through Seiko.
We have fitted the watch with a black leather strap from Hirsh that suits its sporting nature and incorporates the original vintage design buckle perfectly.
This uncommon watch has been sold out and no longer available through Seiko. The watch is showing wear and tear in the form scuffs and scratches on the case.
The sapphire crystal remains optically perfect and scuff free. Powering the Alpinist is the thoroughly modern 26 jewel in-house designed 6L35 automatic movement. This mechanism was introduced in 2018 and is less than 4mm in height allowing the 36.6mm diameter Alpinist a total thickness of under 11.5mm despite the tall domed crystal. The movement is not chronometer rated for accuracy but expect to see around plus/minus 10 seconds per day. The watch is running great with all features operating as designed. We are happy to provide the next owner with a complimentary one year warranty. It is estate priced at $1,500.00 CAD. Stock #501-00366.
I bet since 1958 we’ve sold close to 50,000 rings of every shape, size, and value. The most uncommon shaped of the traditional stone cuts is without doubt the heart. We’ve sold heart shaped diamonds from time to time, but we’ve never had one composed of three separate diamonds, custom cut to look like a heart when set touching each other.
The heart shaped halo frame of 20 small round diamonds convinces the viewer that the centre is grouping is just a single stone. The set comes ready to go with a complimentary wedding ring channel set with 15 diamonds of its own. Together the set contains 46 diamond estimated to weigh 0.75 carts in total of nice SI-I average quality.
They were crafted from 14 karat white gold, weigh 7 grams, in a finger size 7. One of our onsite goldsmiths can adjust the fit up or down a size or two. This set is of contemporary design and shows little to no wear. This unique ring is being offered as a matching set only. Estate priced at $1,100.00 CAD. You’d have a hard time finding an empty setting with no diamonds that weighed the same for just $1,100.00. Such is the great value offered by estate jewellery. Stock #101-00544.

Our little friend has returned, now even more sinister since you last saw him. We recently added a pair of 6.5mm lab grown ruby eyes. The rubies have been bezel set in deep 14 karat white gold bezels resulting in an evil blank stare. He now looks like a cross between the Terminator and a possessed C3PO. A custom pendant isn’t unheard of, but custom made chains are practically never seen. We’ve had a couple come through our estate department over the years, but nothing like this before. What is jaw-dropping (forgive us) about this pendant and chain is the scale of custom work! The extra-long 28.5 inch chain is made up of a link design we have never encountered before, individually linked 6.5mm wide spinal cord inspired cages.
Heavily carved for a thick and durable wall gauge ensuring the chain can survive almost any kind of daily wear. The 72.3 gram chain terminates in heavy custom made end caps and an oversized riveted lobster clasp that is somewhat redundant as the chain will easily slip over you head without the need to release the catch. The clasp allows you to wear the chain without the skull or substitute a different pendant you may have. The back bone inspiration could be overlooked as just an unusual design link pattern, but there is no chance of missing the subject matter of the pendant.
The human skull depiction looks pretty accurate to me. An empty, expressionless, three dimensional depiction of what anyone can instantly recognize. It has been hand crafted with excellent detail and heavy construction. The large pendant measures 4.9cm tall (without the bail).
It has a pierced repeating pattern on the backside that we really don’t know anything about.
The pendant is suspended from a large hinged triangular bail that will accommodate a chain up to 13mm in width. On its own the pendant weighs a substantial 60.5 grams. Together the chain and pendant weigh a combined 132.6 grams. The necklace and pendant are accompanied by a November 2020 appraisal stating a retail value of $23,400.00 plus sales tax.
In excellent condition showing little evidence of wear, this custom made, skeletal inspired piece of jewellery is estate priced at $10,500.00 CAD for the set. The skull can be purchased separately for $5,299.00 and the chain is available for $5,201.00.00 CAD. Stock #431-00819.
Chain has been sold. Skull pendant is available.
Eaton’s was once Canada’s largest retailer, at one point the esteemed firm employed 70,000 and commanded 60% of all department store sales. They were a store that sold quality products for excellent no-haggle prices. You could buy everything from farm equipment to high-end jewellery from their very successful mailorder catalog.
You could even order small prefabricated houses from them; they would ship all the required components and plans right to your building site. Many of these homes are still standing today. For over 100 years Eaton’s defined the Canadian retail experience. Changing times and a changing economic environment led to the eventual bankruptcy of the iconic Canadian brand in 1999. Fond memories and the occasional consumer product are mostly all that’s left. Eaton was a great place to work and they rewarded their employees for long-term service. This rare 14-karat yellow gold Rolex Oyster was presented to a loyal employee for 25 years of service.
Earning one of these rare watches was a significant accomplishment for an Eaton employee and they were proudly worn as symbolic badges of honor. We’ve never encountered a single example that didn’t show patin acquired from years of use. Eatons had access to the finest jewellery workshops employing a wide range of expert craftsmen. They no doubt handled the beautiful hand engraving on the case back.
This 34mm model 5590 is powered by the 25 jewel Rolex calibre 1530.
This movement powered familiar Rolex watches like early Submariners and Air-King models.
Many watchmakers feel this old workhorse mechanism was one of the best ever created in terms of reliability, durability, and outright performance. When we received the watch, the movement only needed cleaning to get up and running with close to chronometer levels of accuracy.
The original crown and waterproof tube were worn and needed replacing. Rolex no longer supplies these parts for 60-plus-year-old models, but luckily there are aftermarket replacements that work and look the same except they are not signed with the Rolex TwinLock Logo.
The classic model is now running great and should be good for many more decades of reliable service. A brand new black, 19mm lizard strap has been fitted to the Oyster case and dresses up this presentation watch.
Other colours and styles are available if you’d like something a little more casual. Included with the purchase are the electronic timing report, original crown, waterproof tube, crystal, and an old tattered appraisal document for February 1995.
We are happy to supply the next owner with a complimentary 1-year warranty. This rare Rolex is estate priced at $5,000.00 CAD. Stock #505-00414.
Lady’s estate rings outnumber gent’s by at least 10 to 1 with us. So it’s refreshing when we get to showcase a high quality men’s ring; especially one that’s never been worn. In this age of record high gold prices, you’re not likely to encounter a gentleman’s ring weighing anywhere near what this one does. At 17.7 grams (well over half of an ounce) you’ll know you’re wearing this one. The size 10 1/2 ring displays a fluted shoulder pattern tapering to the flat bottom shank measuring 5.2mm wide. The top of the ring measures over half an inch wide, set with high quality, channel set, baguette and round brilliant cut diamonds.
The 17 diamonds are estimated to conservatively weigh 1.04 carats and average VS-SI-HI quality. It’s nice to see the ring was not only made with upgraded 14 karat white gold, but also high quality diamonds. This ring remains in never worn, never polished condition. The original bright rhodium plating is still completely intact. The durable rhodium coating only displays a few light scuffs and scratches on the flat surfaces.
We only needed to ultrasonically clean the ring to prepare it for its next owner. If you don’t have a size 10 1/2 finger, one of our onsite goldsmiths are able to adjust the fit up or down as required. This sparkling gentleman’s ring is estate priced at $2,700.00 CAD. Stock number 116-00091.
Add a bold touch and timeless sparkle to your jewelry collection with this distinctive Canadian made belt buckle ring, expertly crafted in 10-karat white and yellow gold. The design beautifully combines the warmth of yellow gold in the buckle with the sleek contrast of a white gold band, creating a striking mixed-metal motif. Adorned with 0.33 total carats of pavé-set natural diamonds graded I2 clarity and I/J colour, the diamonds radiate a soft shimmering effect and brilliant sparkle that beautifully enhance the ring’s clever vintage-inspired design.
Showcasing thoughtful craftsmanship and a significant presence, the ring has a substantial weight of 7.4 grams. Currently a size 6.5 with some room to adjust up or down a size. A playful statement piece full of character and charm, estate priced at $990.00 CAD. Stock #131-00233.
2025 is the year of the snake and this is the perfect accessory to celebrate the 6th animal sign of Chinese Zodiac. The year of the snake comes around every 12 years and symbolizes wisdom, renewal, and transformation. People born in the year of the snake are often seen as strategic thinkers, intelligent, and intuitive. Love them or hate them, you have to admire any animal that can survive without arms or legs. Millions of years of evolution have made them efficient successful predators despite their obvious challenges.
This simple representation custom crafted from resilient 10 karat yellow gold showcases the essence of the snake. It wraps around the wrist in an seamless one piece design. No hinges or clasps to deal with, just slip it over your hand and enjoy the response from people who admire snakes or find them terrifying and the stuff nightmares are made of. At well over half an ounce in weight, you can feel the quality and security of the solid construction. Two small lab-grown rubies provide the emotionless gaze you’d expect from a creature lacking eyelids or even the anatomy to smile.
If you can see the inside of a snake’s mouth, that’s not a smile, it’s more likely a sign you’re about to be bit. At current gold pricing (July 4th 2025) this 17.1 gram 1o karat bangle contains over $1,000.00 in just recyclable gold content! This bracelet will fit a smaller to medium sized woman’s wrist. It can be bent and opened up a little to accommodate a slightly larger wrist if necessary. It is in excellent condition and estate priced at $1,500.00 CAD. Stock #441-00421.
Have you checked out the pricing lately of a good used Rolex Daytona or Omega Speedmaster Moonwatch? These watches have been appreciating faster than the covid real estate market. Finding a classic Swiss chronograph without spending a fortune is getting more difficult all the time. A weak Canadian dollar is adding to pricing pressures too. The Tag Heuer Carrera CV2017-1 is a watch that offers a classic, purposeful, sporting look without the sky high pricing. You won’t find a much better value in the preowned watch market than a Tag Heuer Carrera with an original Valjoux 7750 movement. The Carrera was introduced in the mid 1960s and was arguably more popular than the benchmark Rolex Daytona of the period.
It was standard equipment on many wrists of automotive sports participants, especially in rally car racing. Even today the Carrera looks the same as it did over 70 years ago. Instead of a manual winding 17 jewel movement, the modern Carrera chronograph is equipped with a 25 jewel automatic Swiss made mechanism with a 12 hour chronograph and calendar (something the original lacked). This example is old enough to feature an original Tag Heuer modified Valjoux 7750 movement, (Tag Heuer Calibre 16) which is visible through the display case back.
It’s a reasonably sized watch with a case diameter of 41.5mm. The silver dial with silver chrono registers forms a classic sophisticated look, especially with the highly polished stainless steel tachymetre bezel.
Our latest Carrera comes with the original solid stainless steel bracelet with a locking buckle. If you ever decide you want to go all in for a Daytona or Moonwatch, Carreras like this are always welcomed back as trade-ins. Our example is in very good condition. The previous owner couldn’t have worn it very much. There are only minor scuffs and scratches on the case and bracelet. The engraved bezel shows also shows minor scratches but looks like is has never been polished. The numbers and text are still sharp and crisp.
Even with carful polishing the fine details lose some definition. There are also no dings on the sharp bezel edges. The 13 link bracelet is in excellent condition showing no sag or stretch.
If you have a medium to large wrist you may need to order an extra link or two. The watch looks almost like new with all functions operating as designed. Comes with a complimentary 1 year Bill Le Boeuf Jewellers warranty, the watch is estate priced at $2,000.00 CAD. Stock #520-00137.
Basic Rolex Oysters with automatic movements have been around for more than 75 years. They feature simple and functional dials with only a time display. Over the decades Rolex occasionally updated the design of the hands and continually offered dials with different types of hour markers. Stick, square, arrow-shaped, Arabic, Roman, faceted, tapered, combinations, and luminous versions of hour markers all were featured over the decades. This rare Rolex showcases a parchment coloured, stepped dial with faceted pointed hour markers, and minute markers inboard the hour markers.
The faceted dauphine-style hands display some pitting patina. The raised text ROLEX logo isn’t something seen on modern models and helps to distinguish this as a vintage model.
The 34mm case size is midsized by modern standards but considered a typical size for a gentleman’s watch of the era. As tastes moderate, we’re seeing renewed interest by men and women in the 34 to 36mm sizes. The 13 folded link Oyster style bracelet will fit anyone with a wrist size of up to 8 inches.
The 18-jewel caliber 645 is working well. These early Rolex automatic movements are not the prettiest but they are still excellent performers with many earning certified chronometer status. The automatic module covers many of the beautifully finished components that are on display in the later calibres.
These mid-century Rolex Oysters are great for anyone looking for something a little bit out of the ordinary. They are also a great place to enter the Rolex collecting hobby at a lower price point. Including a 1-year Bill Le Boeuf Jewellers warranty, this vintage Rolex is estate priced at $4,750.00 CAD. Stock #505-00337.

Boasting over 60 years of experience in the jewelry industry combined, Gabriel Gelin and Sam Abaci founded the jewellery company Gelin Abaci in 1969. Renowned for their high-quality engineering and their unique tension setting technique, Gelin Abaci designs contemporary jewellery pieces where the stones are held in place by pressure.
Suitable for certain hard stones like diamonds, this technique involves holding the stones in place using compression rather than traditional prongs or bezels. This unique setting style, which applies approximately 65 to 95 pounds of pressure to the diamond, emphasizes its brilliance and creates the illusion of a “floating” diamond.
Our estate example features a striking, 0.60 carat heart-shaped diamond centre stone that is GIA-certified with SI1 clarity and F colour (GIA #6137286686).
For extra sparkle and elegance, the romantic heart-shaped centre stone is flanked by 2 high-quality round shoulder diamonds also of SI1 clarity and F/G colour (0.31 total carat weight) as well as an additional 6 round bead set accent diamonds (also 0.31 total carat weight) of VS/SI clarity and G/H colour.
At a substantial weight of 8.2 grams, the 14 karat white gold band ensures both durability and a luxurious feel. Currently size 5.5 with a possibility to size down only.
Comes with a 2013 Gem Lab Appraisal Report suggesting a retail value of $8,950.00.
Our estate price is $2,750.00 CAD. This exquisite designer ring is ideal for someone who values contemporary design, GIA-certified quality, and a symbolic heart-shape for an engagement or anniversary gift. Stock #101-00583.
We have dozens of new and estate anniversary rings like this. From small light 10 karat gold with 0.10 carats of diamonds to over 5.00 carats of total diamonds weight 18 karat gold versions. They come in a style and a budget to suit everyone. I selected this example because the 14 small diamonds are very high quality (VS-GH) and twinkle way more than the 0.17 carats total weight would suggest. The simple 2.6 gram 14 karat white gold setting measures 2.9mm wide in a finger size 5.5. Bead setting allows more light and more sparkle than the channel set alternative setting style. Perfect condition showing no measurable wear. It could also be used a wedding ring, it’s flat edge will fit many different engagement ring designs. Estate priced at $490.00 CAD. Stock #e8902.
From the less is more playbook comes this super simple wedding ring by Tiffany. This is about as basic as it gets for a gentleman’s wedding ring. Understated but all quality from the second you feel it. Highly polished smooth finish and just 2.6mm in width but with a very tall profile of 2.5mm. It’s about the same gauge as round coat hanger wire but far more dense and white. Despite the width, this ring is deceptively hefty weighing over 7.3 grams. That’s one of the great features of platinum, its density. In Tiffany form of 95% purity with a touch of alloy to make it harder, this form of platinum is heavier that any karat of gold, even pure gold weighs less.
Sometimes we like to pick on Tiffany because it’s hard for us to get our heads around the price of some their jewellery, verses the actual value of precious metal it contains. Not so with this ring, at today’s platinum price (June 26th, 2025), this ring contains $435.00 in just recyclable metal content yet the Tiffany’s retail price for this ring is only $1,650.00. A less than 4 to 1 ratio of precious metal verses retail price is better value than many generic rings of this style you’d see at your local mall jewellery store. This ring measures a size 9 1/2 but can be sized up or down to fit practically anyone. The ring is in very good condition showing only minor signs of wear. We decided not to aggressively polish the inside and lower shank edge to in order maintain the crisp Tiffany signature and quality marking that is stamped inside the ring.
This is a current design (Product number: 72538749) available for purchase at your local Tiffany store for $1,650.00 CAD. Our estate example is priced at just $850.00 CAD. Stock #401-00300.
Every once in a while a ring arrives in our estate/vintage department that makes our entire team stop dead in their tracks and just stare. This is that once in a while ring. Pretty much the definition of less is more luxury. Just a simple double gallery platinum setting with 2 slender baguette cut diamonds. The shoulder diamonds draw your attention to the beautiful marquise brilliant cut secured in a six claw head. When this ring arrived we immediately sent the diamond to the Gemological Institute of America in New York City for a quality report. Unfortunately, Canada has no grading service that is internationally accepted like a GIA report. It costs a lot of money for this certificate ($205.00 USD plus 2-way shipping and insurance) but it’s worth the peace of mind knowing the world’s foremost authority on diamond grading has examined your diamond. While we are fortunate to have a GIA trained Graduate Gemologist and diamond graders on staff, there is no substitute for an actual GIA laboratories report. Every important diamond should come with a Gemological Institute of America report.
If you’re considering a significant diamond purchase, insist on a GIA report, there is no substitute. The full December 5 2019 report can be seen online here. In addition to a very high F colour, VS1 clarity and no fluorescence, it’s the lovely outline of this particular marquise with its length to width ratio of 1.73:1.00 plus a tiny table percentage of just 58 that makes it so pretty. These characteristics may seem trivial but collectively they make a huge visual impact that needs to be seen in person.
I can’t imagine a better setting than the pure luxury of platinum with the two accent baguettes running down the shoulders. The ring is in excellent condition and ready to wear in a finger size 5 1/2. If you’d like to use this diamond in a different setting we’d love to custom make whatever you have in mind. Stock #e12943 101-00284.
Viewing by appointment only.
Seiko has roots in timekeeping dating back to 1881 when 21-year-old Kintaro Hattori set up a shop in Tokyo selling watches and clocks. A little over a decade later he set up a factory to produce his own clocks. Seiko has a history of innovation and technological achievement that rivals any of the traditional Swiss luxury watch manufacturers. The Seiko Prospex Titanium Diver SNR029J1 is a watch that showcases some of Seiko’s most innovative technology. Despite the immense variety of watches available, the vast majority can be classified into two categories: either automatic or quartz. Automatic watches run on mechanical energy generated by the movement of the wearer’s wrist which winds the mainspring then slowly, predictably releases power to the hands, through a series of gears to an oscillating balance wheel. Automatic watches don’t use an electric power source. They require cleaning/servicing every 5 to 10 years. An exceptionally well-tuned, high-end, fully adjusted, automatic watch can keep time with an accuracy of a few seconds per day. Quartz watches rely on a quartz crystal to keep time, which vibrates when an electric current is passed through it. In most quartz watches, the crystal will vibrate 32,768 times per second, which the circuit interprets to achieve an accuracy of +/- 1 second a day (often much better). The downside of quartz watches is that they need a battery or solar-charged capacitor to power the crystal and move the hands. The Grand Seiko “Spring Drive” movement takes the best aspects of both types of watches, using their “Tri-Synchro Regulator” technology.
Like an automatic watch, its power comes entirely by the motion of the wearer’s wrist in the form of stored spring power that is slowly released. However, instead of powering a traditional escapement/balance wheel releasing power through a series of wheels and gears to the hands; the mechanical energy is used to power a tiny generator producing continuous electric current. This current first powers a quartz crystal, keeping time much more precisely than any mechanical balance wheel oscillating 4000 times slower ever could. The watch then compares the frequency of the quartz crystal with that of the spring drive glide wheel and uses the remaining current to apply a frictionless electromagnetic brake on the wheel to regulate its speed. The brake keeps the wheel perpetually spinning at a precise rate as determined by the quartz crystal. No battery to replace, no rechargeable capacitor to fail as with every other quartz watch including solar-powered watches. You get the best of both worlds: the accuracy of a quartz watch with the convenience and reliability of an automatic watch.
There truly is no other watch in the world that even comes close to this level of ingenuity. Our latest estate watch comes from a Canadian authorized Seiko agent and was purchased in late January 2021. The Prospex diver is a serious watch. It comes with a water-resistance rating of 300 meters, a case size of 44.8mm diameter, and 15.8mm thick.
It is certainly a large watch, but the mostly titanium construction keeps the weight down to a manageable 160 grams. The thick rotating bezel is easy to grasp and simple to rotate, as is the oversized 8mm screw-down crown. A double-locking, foldover clasp is equipped with a cleverly integrated extension allowing 2.5mm to over 30mm of extra bracelet length.
A matt black dial is the epitome of legibility with thick hands and applied hour markers, all treated with Seiko’s proprietary luminous material that is equal or better than Super-LumiNova.
Instead of highly polishing frames for all the hour markers, Seiko has micro-etched the 12,3,6, and 9 markers. The resulting reflections display subtle dispersion of rainbow interference colours.
A sapphire crystal with an anti-reflective inner surface coating should keep the scratches at bay while providing perfect optics. This super hard crystal has been ground with a concave inner surface for better visibility at any angle underwater. A handy calendar and power scale display the 72-hour power reserve of the 5R65, 30 jewel movement.
The watch is in very good condition, showing small scuffs and scratches but remaining in original unpolished/refinished condition. There are a few tool marks on the edge of a couple of links from a previous bracelet length adjustment. This is not a grey market watch, it comes complete with its original packaging, booklets, endorsed warranty card, and even the original price tag of $7,800.00 CAD. This model is still being produced and is shown on the Seiko website but now it has a retail price of $9,000.00 CAD. Our price for this carefully worn Spring Drive Professional is $5,000.00 CAD. Stock #501-00120 e14617.

SOLD
Custom made right here in Barrie by Jeff Walters Jewellers and now it’s looking for a new home. Both rings look perfect showing zero wear of any kind. The claws and channels should be good for several decades under normal use. Well made in a finger size 5.25 from 5.3 grams of 14 karat white gold the rings contain 23 nice quality round brilliant cut diamonds. The engagement ring holds a 0.38 carat diamond of I1-F quality with a very good cut. It’s the superior cut that really makes the centre sparkle. Channel set along the shoulders and in the wedding ring are an additional 22 diamonds of SI2-I1-GH quality.
Although these rings have been previously enjoyed you’d never know it. We have professionally cleaned and refinished them to a bright flawless polished finish. If you’re not a size 5.25 no problem, our onsite goldsmiths can adjust them up or down as required in just a day or so. As good as new and read go except at about half of the original price and this time they’ll come in a Bill Le Boeuf Jewellers box. Being sold as a set only for the estate price of $1,750.00 CAD. Stock #e9344.
Gentleman’s watches and Cartier goes back to where it all began. Wristwatches were pretty much only worn by women until Cartier designed the Santos. It was the answer to a request from pioneering pilot Alberto Santos Dumont who needed a watch while flying his precarious aircraft.
A gentleman’s pocket watch was too dangerous and awkward at the least to use while trying to control experimental airplanes. Dumont was a personal friend of the famous Paris Jeweller Louis Cartier. The Cartier “Santos” can correctly be called the world’s first true pilot’s watch. Modern men should be grateful to both Cartier and Alberto Santos Dumont or we could still be using pocket watches today.
The Dunmont W2SA0017 is the latest version of a watch that goes back to 1904 and has been in serial production for well over 100 years. Its extra large size may not be truely representative of contemporaries from other brands but this is large for a Santos. The square outline looks much larger than 33.9mm width suggests. Compared to a Rolex 36mm Oyster it actually appears larger.
The slim profile of just 7.5mm is accomplished with the help a very thin Cartier-branded version of Piaget’s ultra-thin, manual-winding calibre 430P calibre with a simple two hand display of the time only.
This remarkable little movement is only 2.1mm tall. The hand wind movement has a power reserve of 38 hours and runs at a relaxed frequency of 21,600 cycles per hour. This reliable mechanism has been in service for around 25 years. The case features a solid 18 karat rose gold bezel, sapphire crystal, beaded crown with synthetic spinel cabochon. The signature of Alberto Santos Dumont is debossed into the case back along with the serial number and other Cartier information.
This watch comes complete with everything from when originally purchased in June 2021.
It is in original unpolished condition. There are a few light shallow scuffs on the rose gold bezel and stainless steel case.
These minor blemishes go unnoticed except under extreme scrutiny. The quick release original Cartier black crocodile strap is in like new condition along with the signed Cartier buckle.
This is a current model available at any Cartier boutique for $11,700.00 CAD. For a sophisticated event there is nothing nicer to wearing a thin hand wind mechanical timepiece. Refined taste in a less is more package is what the Cartier Dumont is all about. This watch is covered by our 1-year warranty (prorated 5-years) and is estate priced at $8,865.00 CAD. Stock #501-00238.


A more modern version of a traditional solitaire. The 0.43 SI2-H pear-shaped brilliant cut diamond is secured by a channel and prong setting strengthened by the yellow gold bar running through the bottom of the head. It really looks good and is easily matched with a flat edge wedding ring. The ring weighs 4.2 grams and is estate priced at $1,180.00. Stock #101-00163.
It’s been a while since we posted a colourful opal, so we thought we’d do it in style with an excellent example of a boulder opal with a very good play of colour in the green/blue range of hues.
While not a true black opal, the appearance between black and boulder opal can over lap. Boulder opal are more valuable than common white opal and usually less expensive than a true black opal. Black opals are coloured by trace elements of iron and carbon causing the dark colour. Boulder opal can easily be spotted by a layer of solid dark brown ironstone that is intentionally left on the back of the stone to provide contrast to the body colour. The ironstone base of this opal is clearly through the back of the ring.
Don’t confuse and don’t be confused by someone representing an assembled opal doublet or triplet as a natural black or boulder opal. By the measurements of 14.5mm x 8.2mm x 3.8mm and formula, we estimate this opal weights 2.50 carats. It displays an almost complete colour shift from medium purplish blue to a bright slightly yellowish green as the ring is moved.
High quality opals have a life of their own and are captivating to observe. The swirling style ring is the perfect compliment for a colourful opal. The opal has been accented with a white gold crown setting on each shoulder containing what we believe are white quartz gems. 3.8mm natural diamonds would have provided more sparkle but would have added hundreds of dollars extra cost to the ring. We can add a couple of nice estate diamonds, leave the quartz in place, or remove them completely as this beautiful opal doesn’t need anything else to be the star of the show.
The ring is well made and in very good condition. The opal remains in excellent condition displaying very good polish with no scratches. One of our onsite goldsmiths can adjust the fit as required up or down a finger size or two. This artistic custom creation is estate priced at $1,999.00 CAD. Stock #206-00592.
SOLD
Luxury watches come in all sizes, if you like yours served up extra large, we have the perfect watch for you. This watch measures a generous 48.8mm in diameter. For decades the benchmark size for a racing chronograph has been around 40mm to 42mm. Omega’s Speedmaster and the Rolex Daytona both measure between 40 and 42mm. Pictured beside our Breitling Bentley T Speed, an 18-karat white gold Daytona looks more like a mid-sized watch.
The Breitling Motors T Speed Chronograph features a very interesting chronograph function; the elapsed seconds register runs at twice the speed of a traditional watch. The seconds register circles the entire dial in just 30 seconds. This super fast pace does serve a practical purpose, it allows 1/10th of a second timing capability. Without the highspeed chronograph module, this watch would have to make do with just a 1/5 second timing increment. Seeing the seconds register circle the dial in just 30 seconds does take some getting used to, but this feature makes great sense in a business where tenths of a second matter.
The extra large dial makes interpreting the tenths possible. The dial also incorporates a tachymeter scale for measuring units per hour between 1000 to 95. A rotating slide rule bezel adds extra mathematical calculation functions for those who want to exploit every possible function this watch offers. The iridescent natural mother of pearl dial is an upgrade luxury feature over the basic black or white face. The Bentley connection extends from the case back that displays 3 classic Bentley automobiles to the engine turned bezel finish that takes inspiration from the dashboard of vintage Bentleys.
This watch is number 272 of just 500 produced.
Attached to the case is an extra-long, heavily padded crocodile leather strap with white stitching. The strap is secured by an 18-karat foldover deployment buckle.
The watch comes with a Bentley inner/outer box, a limited edition certificate, and a chronometer certificate. This watch was owned by a long time Bill Le Boeuf Jewellers customer who took exceptional care of it. It is in excellent condition looking almost like new.
The leather strap hardly looks worn. All the functions of the watch are operating as designed. We are happy to include a 1-year warranty for the next owner. This watch is estate priced at $19,750.00 CAD. Stock #515-00054.
A deep seated bias for baguette cut diamonds makes this unusual eternity ring an absolute favorite from our current estate collection. You’ll really have to see this band in person to understand. The sleek and subtle optics of the step cut diamonds work so well channel set end to end without any gaps. 17 extremely well matched baguettes light up in bright white and rainbow coloured flashes. The diamonds are made all the more striking between heavy channels of calm, understated 14 karat yellow gold. Part of what makes the 1.50 carat total diamond weight so striking is their high VS-GH quality. The diamonds show no colour or inclusions to the unaided eye. Currently the 3.1 gram ring measures a finger size 5 3/4 with limited room to adjust. The estate price for this glass slipper of a wedding/anniversary ring is $2,660.00 CAD. Stock #121-00110 e11349.
Here’s your chance to get a pretty Canadian diamond engagement ring, wedding ring and a matching anniversary ring all for less than the replacement value of the engagement ring alone. This style engagement ring has been a popular choice for a few years. The centre diamond weights 0.34 carat with an excellent cut that really shows off the nice H colour. A clarity grade of SI2 is based on a white crystal inclusion that falls just within the table border that is visible only with a little magnification. Two matching wedding rings have been soldered together on the bottom forming a sleeve that fits snuggly over the engagement ring completing the fully dressed looked. 16 additional channel set brilliant cut diamonds of SI2-I1-HI quality contribute to the 0.58 carats of estimated total weight. The centre diamond has been laser engraved with the image of a maple leaf and a unique serial number identifying its origin from the North West Territories in Canada. The 14 karat white gold set weighs 7.6 grams in a 5.5 finger size. Excellent overall condition. Only a quick polish and fresh rhodium plating will have it looking identical to new. Being sold as a set only for the estate price of $1,440.00. Stock #e9007.
They are more than just a diamond hoop or a simple drop earring, this pair does a great job at being glamorous in a modest and easy to wear size.
Diamond earrings continue to be one of our most popular estate jewellery categories. This pair is very clever, looking like a 1.00 carat single stone drop at the bottom of each hoop. The drop sections each actually contain 9 smaller diamonds that overlap each other leaving no empty spots to reveal the illusion. The four decorative claws further reenforce the mimicry and are nothing more than ornamental.
As a finishing touch all the gold areas around the diamonds have been rhodium plated to a brilliant white finish. The 34 round brilliant cut diamonds used in the 4 sections total an estimated weight of 0.75 carats. They are well matched and of better quality than typically seen in most multiple stone designs, SI clarity and HI colour. The earrings are secured by easy to use hinged locking posts, always lined up and no fussy friction backs to keep track of.
The decorative filigree gallery is a nice touch that doesn’t serve any purpose other than to look pretty.
These earrings are made from close to 3.5 grams of upgraded 14 karat gold. Excellent condition and estate priced at $1,320.00 CAD. Stock #151-00364.
SOLD
Somebody went and put our favorite underdog diamond cut into a tennis necklace; baguettes! And they used them the way they were designed to be used, in undulating ribbons of diamonds, unlike anything the fabric industry has ever achieved. This glimmering ribbon is edged with delicate stitching of petite round brilliant cut diamonds.
The 366 round diamonds are all of SI-I1-GH quality, their kaleidoscope of sparkle creates the perfect contrast to the baguettes. Set tightly against each other the 147 tapered and graduated baguettes shimmer brightly in time to the wearer’s breath. They’ve been gifted with high VS-SI-FG quality to keep them free of eye-visible inclusions that would mar their intensity. The necklace measures 16 inches long and has been fabricated from 32.5 grams of brightly rhodium plated solid 18 karat white gold. Its back half was left plain, to focus its almost 10.00 carats total diamond weight across the throat. The necklace is secured with a hidden box catch and two additional safety locks for peace of mind during wear.
In like-new unworn condition, the necklace is accompanied by an AGL Appraisal stating an estimated retail replacement value of $29,200.00 CAD.
We feel a more competitive replacement value would be around 50% less at $14,575.00 CAD, and our estate price for this beautiful necklace is $10,200.00 CAD. Stock #161-00181.


The first Rolex Explorer II (model 1655) was pretty much a commercial disaster. It was marketed as a specialty watch for those interested in spelunking (cave exploration). In the 1950s and 60s, this activity was actually becoming somewhat popular. The original Explorer II had two hours hands and a fixed bezel indexed for 24 hours. The smaller, skinny hour hand would circle the dial every 12 hours, while the dominant hour hand took a full 24 hours to go around the black dial, which was the only colour offered. The theory was, in the absolute darkness of a cave the only way to determine AM hours from PM hours would be by referencing the dominant 24-hour hand. The oversized 24-hour hand was treated to an extra-large dose of luminous tritium making it the obvious feature in a no light situation. Unlike the rotating bezel of a Submariner that can be used as a minute timer and the GMT-Master bezel that displayed a second time zone, the Explorer II bezel is fixed in place. It can only show the current time albeit in a 24-hour format. The vintage looking first generation Explorer II didn’t sell in large numbers, today they are expensive collectibles with prices starting around $30,000.00. Production of the originals ran from 1971 to 1984. Our latest estate Rolex is a very early 2nd generation example from 1986. The 16550 features an entirely new larger case, sapphire crystal, white gold framed hour markers, a white dial option, and a new caliber 3085 movement.
The new movement enables the user to independently adjust the 24-hour hand to display a second time zone. This feature set the Explorer II free from the depths of just cave exploration to the world of jet travel with a dual time zone display capability. The 16550 was only produced from 1985 until 1989 making it a relatively scarce transition model. I think this is the first one we have ever had. If you come across a Rolex that looks like this, chances are it is the much more common 16570 produced from 1989 until 2011. Aside from a few minor movement differences, the only way to distinguish a 16550 from the common 16570 is, the 16550 (2nd image) has a thicker numeral font, horizontal middle sections on the 2s, and triangle indexes are a little longer.
It’s always fun to discover the tiniest changes that Rolex implemented into their watches as they evolved. At some point over the past 35 years, the original tritium dial was replaced with a more modern luminova version. The purist collector will always prefer complete originality. Many of the original dials on 16550 Explorer IIs have been updated (especially the white versions) as the paint shifted to a creamy color, while the paint on the black dials often cracked. The newer replacement dial on our 16550 offers an obvious advantage of still exhibiting phosphorescence after exposure to bright light.
Original tritium dials lose their ability to glow after around 25 years. Our Explorer II is in fair overall condition, showing sag, stretch and wear in the 11 link 78360 Oyster bracelet with service buckle.
The synthetic sapphire service crystal shows a small scratch but otherwise displays perfect optics over the glossy black dial. The previous owner spiced up the look of this 38-year-old classic by installing a Swiss made Rubber B strap with a thin red pin stripe running down the centre. This strap is specifically made for the Explorer II and fits the unique case profile and uses the original Rolex buckle, giving it a factory looking fit.
Including a complimentary 1-year warranty prorated for 5 years, this uncommon Explorer II is estate priced at $8,790.00 CAD. Stock #505-00128.
Despite the vintage motif of this ring, it is in completely unworn condition, looking just as it would have in its original showcase. The 6 integrated prongs extend to the raised white gold ring top, burying the diamond under protective white gold. The precise machine finish on the shoulders is untouched, contrasting the brilliance of the diamond. Polished and brushed rhodium/white gold, and the luxurious warmth of the 10 karat yellow gold, much more yellow than you’d expect from a 10 karat alloy give the ring a much more expensive look.
The diamond itself weighs 0.13 carat of I1-K quality. The 6.6 gram ring is Canadian-made and currently measures a finger size 11 with room to adjust. Our estate price for the unworn gent’s ring is $720.00 CAD. Stock #118-00062.
SOLD

I wonder if Jack Heuer (great grandson of the company’s founder) ever could have imagined that 60 years after he designed the original Carrera, it would still be one of the brand’s most sought after models. It’s incredible to think that the iconic 1964 design is still around and looks basically the same as the original. Calibre 1887 squarely places Tag-Heuer at the forefront of modern watch making technology. The 39 jewel column wheel automatic winding chronograph movement is a miniature mechanical masterpiece comprising of 320 individual components working in perfect coordination. Although the design wasn’t completely developed by Tag Heuer, it’s been boldly re-engineered to a higher standard with greater performance. The column wheel chronograph is much more precise feeling compared to modular types seen in most automatic chronograph movements built by rival brands. Sophisticated, a pleasure to operate and beautiful to look at through the display back.
It’s a movement that Tag Heuer is obviously very proud of. Our Carrera was purchased at an Ontario Tag Heuer authorized agent in the summer of 2011.
It was worn for over 10 years on the original stainless steel bracelet. About two years ago the original owner purchased the very expensive Tag Heuer stainless steel deployment buckle with black crocodile strap. The accessory Tag Heuer strap and buckle cost over $1,000.00. The strap and buckle combination was only used a few months before he decided to trade the watch in for something different. The buckle still displays a protective blue sticker on the inside of the fold.
The easy to operate deployment buckle is simple to operate and helps extend the life of the beautiful stitched edge strap. The 41mm case looks bigger than the dimension suggests thanks to the silver/white dial and thin bezel. This version is the dressiest of the Carreras, a simple dial with stick hour markers and no tachymeter bezel scale allows the watch to look equally at home on the race track or at your next black tie event.
A discreet calendar display window is located at 3:00 o’clock providing some useful extra functionality. Comes complete with the original inner/outer box, fully endorsed warranty card and instruction booklet. Bill Le Boeuf Jewellers will supply an complimentary 1 year warranty. Estate priced at $3,500.00 CAD. Stock #520-00128.
Relative to its original purchase price of just $190.00 CAD in 1971, this Rolex had a costly service of $45.00 just 3 years later. The repair/service cost almost 25% of what the entire watch sold for a few years before.
The repair was likely required due to a severe shock or drop of some sort as it needed a new balance staff (common repair) and a general cleaning while it was disassembled. A similar service to a contemporary Rolex would likely cost somewhere in the $1,200.00 to $1,500.00 today. While that sounds like a lot of money, it only represents about 10% of the value of the new Rolex GMT Master II.
This tells quite a bit about the cost of Rolex watches and the servicing fees. Highly skilled watchmakers and technicians were plentiful in the 60s and 70s, every small town had at least a few of them.
The occupation wasn’t very lucrative as plenty of competition kept the servicing costs extremely low. My father was an experienced watchmaker in the 1950s; there was plenty of work to be had, but not much compensation relative to the skill and time required to maintain such fine instruments.
Today qualified watchmakers are far more appreciated and compensated accordingly. The cost of a new Rolex watch has seen exponential price appreciation in the last 50 years. The median income in the year our latest estate watch was made (1971) was around $10,000.00; the cost of the watch represented around 2% of a year’s wages. With a median Canadian income of around $64,000.00 (according to statistics Canada) in 2023, a modern Rolex GMT-Master II now costs over 21% of a year’s wages. Rolex has become far more than just a high quality watch manufacturer, they have transformed their business into one of luxury and lifestyle.
This one owner 1971 Rolex GMT Master is a testament to the quality of Rolex watches. How many consumer products can literally be used 24/7 for one’s entire adult life and then left for the next generation to use? You’ll always pay up for a good Rolex but there are far worse things you can do with some extra income. This unlikely investment was quite a surprise to the original owner when he finally decided it was time for a new home after over 50 years of ownership.
This local watch comes with its original invoice from the summer of 1971. It also comes with the mentioned 1974 service receipt from Rolex Canada. It was serviced again at Rolex Canada in late 2002. That major service included an overhaul to the self winding mechanism plus replacement of the dial, hands, bezel insert, crown, case tube, repair bracelet (new buckle perhaps), and a few miscellaneous movement parts to the tune of $994.00 (over 5 times the original purchase price) plus sales tax.
Incidentally, sales tax in Ontario increased 260% from 1971 to 2002, it seems Rolex isn’t the only one who knows how to make money. In a perfect world, we’d prefer to have all the original 1971 parts still on the watch, but we’re thrilled just the same to have a Rolex this complete with a known history. The replacement parts are genuine Rolex, just not original to the watch.
Also included is the rare GMT brochure, fully endorsed punched paper warranty booklet, original chronometer hang tag, green plastic product tag with matching serial number, 2002 service papers with carbon copy, service/travel pouch, and various other payment receipts. Notice that the penmanship is the same on the original sales invoice and warranty paper.
The original inner/outed box is complete but the spring loaded hinge is broken. Despite being over 50 years old, we have no concerns about offering a complimentary 1-year warranty (prorated for 5 years) on this classic dual-time Rolex GMT Master 1675. Our estate price is $20,000.00 CAD. Stock #505-00343.





Wholesale is the new retail, if you know where to shop. There are great opportunities to be had in our large selection of estate jewellery. Some of our gold jewellery is priced barely over its recyclable value and occasionally even under it. Our better quality natural diamonds with Gemological Institute of America reports are always priced better than the competition and often priced at or under wholesale replacement cost. Our latest estate natural diamond is a great illustration of that. We are very confident this is the best value oval diamond of this size/quality currently on the market. Oval brilliant cut diamonds are the most requested shape, and have been very popular alternatives to round diamonds for a while now. Our latest estate ring should prove to be very popular for someone looking for a high quality natural diamond engagement ring. The full February 2016 GIA report can be seen online here (original laminated report not available).
The 1.51 carat diamond is an eye clean SI1 clarity with a very good F colour, excellent polish, very good symmetry, and no fluorescence.
It exhibits a very attractive length to width ratio of 1.36:1. It has been secured in a custom made, four prong double gallery ring setting with 22 good sized natural accent diamonds running down the shoulders.
Each shoulder diamond has been expertly French set in 4 prong settings. The 3.4 gram ring has been crafted in premium 18 karat white gold. It measures a 7 and can be adjusted up or down a finger size or two. The ring remains in excellent lightly worn condition. A light polish and fresh rhodium plating would be all that is required to make it look like new. Its flat edge offer an endless selection of possible wedding or anniversary ring choices when the time comes.
No need to purchase an expensive custom made wedding ring to fit a specific contour, this one will fit and compliment almost anything. We encourage you to compare and shop around the value this ring offers. We are very confident you won’t find better. This ring is estate priced at $10,500.00 CAD. If you’d like to buy the centre oval diamond only, it is available for just $9,500.00 CAD. Stock #101-00624.
There is no way to identify the name of this complex bracelet link design. Once again, leave it to the Italians to produce a complicated link shape like this. The yellow gold side sections are formed from an elongated curb link design that has been turned on its edge. They are connected by a solid ingot of white gold that has been precisely soldered in the centre. Viewing the bracelet from the top displays a yellow gold “landau bar” repeating pattern with reflective flashes from the polished white gold ingots. Each link section is tightly hinged with virtually no play in the joints.
Chain/bracelet making doesn’t get any better than this. The oversized lobster clasp features a white gold rivet that will resist wear from the steel spring hidden inside much better than yellow gold.
The bracelet looks to be in unworn condition. At 8 1/2 inches long and 8mm wide it was likely produced with a gentleman in mind.
We can remove a few links to fit a lady’s wrist. The bracelet weighs 1.2 troy ounces (37.5 grams) and has been expertly crafted from ungraded 14 karat gold. This unique piece of jewellery is estate priced at $3,850.00 CAD. 
SOLD
People often ask us how much do lab-grown diamonds cost. Well that really depends on where you buy them. Despite what online sources and retail stores are selling them for, the truth is they only cost around 2% of what an equivalent natural diamond does (at a wholesale level). Just to give you idea of just now cheap lab-grown diamond are, we just did a search for a lab-grown diamond the same as our estate natural and found 9 examples the same or bigger and better for under $183.00 USD!!! This is our regular retail price plus shipping.
They are so cheap they really have become a separate and distinct market from natural diamonds. It is thought that natural diamonds are between 1 to 3 billion years old and can take millions of years to form deep within the earth. The majority of modern lab-grown diamonds on the other hand are made in just a few days in factories in China and India. We are happy to show you both natural or lab-grown diamond options if you are thinking of buying, but our hearts will always hold a special place for the miracle of a natural diamond.
Our latest estate natural diamond is this very good quality 1.20 carat pear shaped brilliant cut of very nice VS2-F quality.
This ring is under a year old and is in like new condition. The GIA report was produced exactly one year ago to the day.
The American made setting is thin and delicate made in finger size 4 1/2. It has a very fashionable skinny shank measuring just 1.8mm wide and contains 18 tiny round brilliant cut natural diamonds of SI-GH quality weighing a combined 0.15 carat.
This ring can easily be sized up a few sizes if you have a more average sized finger. It will compliment any wedding/anniversary ring with a flat edge, no need to get an expensive custom made ring to match. While natural diamonds like this have seen pricing pressure in recent years they don’t appear to be going anywhere. Natural diamonds are very expensive to find and extract, new diamond mines are not coming on stream because of this. As long as there is demand for natural diamonds there are very good opportunities to purchase them for excellent values right now, especially if you consider an estate diamond. This high quality natural estate diamond ring is priced not much more than what many stores are selling lab-grown versions for. Bill Le Boeuf Jewellers always offers true value on everything we offer. This ring is a great example of that for the estate price of $5,970.00 CAD. Stock #101-00623.
SOLD
Elevate your jewelry collection with these exquisite Italian-crafted dangle earrings. In many parts of the world, especially across Asia, the Middle East, and parts of Europe, gold is deeply ingrained in cultural, religious, and economic traditions. In these cultures, a high value is placed on gold purity and lower karat gold, such as 10-karat (which contains only 41.7% pure gold), is often considered costume jewellery or not “real” gold at all. This cultural preference for higher karat gold isn’t just aesthetic – it’s about value, status, and authenticity. Lower karat gold simply doesn’t hold the same prestige, resale value, or spiritual meaning, and may not even be accepted by local jewellers or gold buyers.
It is likely for these reasons that these Italian “fashion” earrings, featuring a graceful cascade of coloured glass stones from light purple, to light blue and then dark blue are crafted from luxurious Italian 18-karat yellow gold (75% pure gold content by weight) at 10.35 grams total weight including stones. They are secured by sturdy European backs with a large 5.7mm disc to distribute the spring pressure.
Designed to captivate, the delicate dangle movement adds a touch of charm and fluidity, making them perfect for both daytime and evening wear. If these are a little much at 8.2 cm in total length, we could easily remove the bottom section and buy the left over gold to lower the overall cost. A striking example of timeless Italian craftsmanship combined with contemporary flair. Estate priced at $410.00 CAD. Stock #211-00200.
SOLD
These ladies Tag Heuer’s are almost the same but a little bit different. The 2000 Exclusive pictured on the left was the final evolution of the series before being replaced by the Aquaracer model that is still in production today. The 2000 Exclusive featured a more complicated bracelet link pattern containing an extra section. Likewise with the bezel, made from two individual components rather than just one as on the Aquaracer.
According to our calipers the slightly older 2000 Exclusive measures a little larger at 28.5mm diameter compared to 27.0mm for the Aquaracer. Both watches are powered by a Swiss made quartz movement with calendar display and seconds hand. These ultra reliable movements usually run within a few seconds of dead accurate per month. Expect changing the silver oxide cell every couple of years for around $25.00 and perhaps a full overhaul every 20 years or so. They both feature 46 natural round brilliant cut diamonds of exceptional VVS-G (or better) quality, totaling over half a carat for each watch.
10 diamonds are set on the mother of pearl dials that are all unique and one of a kind, with the remaining 36 bead set on the one way timer bezels. These dials showcase a subtle rainbow of dispersion that shimmers across the face. We polished the newer Aquaracer’s case and bracelet to a mirror finish but left the 2000 Exclusive alone with its contrasting brushed and polished appearance. They are pretty much the same in technical specification, with the Aquaracer having a higher water-resistance rating and a diver’s bracelet extension under the locking buckle.

Both watches are more than qualified for rugged use under any situation.
The slightly larger Exclusive model comes with its original box and documents. The warranty card has been filled out by hand with a clerical error for the serial number by someone from Tag Heuer’s parent company Louis Vuitton Moët Hennessy (LVMH), the model number on the outer sleeve is for the correct watch, but again with a different serial number, no one is perfect. We are happy to report both watches are working great and keeping excellent time. They each come with our complimentary 1 year warranty. Estate priced at $2,250.00 (28.5mm 2000 Exclusive WN131J 520-00145) and $2,000.00 (27mm Aquaracer WAF1416 520-00144).
Aquaracer has been sold 520-00144
Omega makes many limited editions of their popular models. I’m sure there are dozens of different limited edition Seamaster James Bond watches and Speedmasters. The sheer numbers of limited edition offerings definitely dilute the appeal and merely make most just another model variation. We’ve seen many Omega limited editions made in runs of up to 10,000 units. Here is another Omega limited edition, but this one is well and truly a rare watch as just 333 were ever made. This is one of the last few made, number 328 of 333.
For a giant manufacturer like Omega, this is a remarkably low number. We originally sold this watch around 2007 when we were authorized agents for Omega. We still have an old catalog here showing the Canadian retail price of $18,000.00.
This is a curious watch and I really don’t know what it was commemorating or why it was produced in such low numbers. What I can say is it is a very interesting timepiece due to its overwhelmingly simple and effective approach to displaying the time. The 44mm case size was giant when this watch appeared in 2007 and even today it looks extra large due to the bright white dial and lack of a thick bezel.
This isn’t white paint, it is made of glass enamel. Enamel is an old technique using powdered glass and fusing it to a metal base. This process produces a super hard durable finish that doesn’t fade or stain. The technique was mostly abandoned when pocket watches fell out of favor around the mid-point of the 20th century. Omega clearly hasn’t lost its ability to produce a dial that looks like it could have come from one of their exquisite pocket watches from 100 years ago. The font on this watch looks like an early Art Deco design or something you’d see on a First World War trench watch. Simple tapered hands, a skinny blued-steel second hand, and a thin minute track on the dial edge complete the vintage look.
Rather than equipping this watch with a predictable display back, Omega selected to fit this watch with a beautiful embossed image. Chronos is the Greek god of time. The winged deity is pictured on top of a globe holding an oversized pocketwatch in one hand and a spear in the other.
I’m sure the solid threaded case back added significant cost compared to a display window and contributed to a total weight of 139 grams! This watch is in almost new condition, it has only been worn a handful of times and has never been polished in any way. Over time the copper alloy in rose gold produces a soft oxidized patina that we decided to leave alone.
This subtle finish can easily be removed with a polishing cloth by hand in less than 1 minute. We thought leaving it completely visible was a testament to show just how little wrist time this watch has seen since 2007. The original soft brown crocodile strap is perfect and the 18-karat locking deployment buckle works great and snaps shut with a satisfying click.
Powering this less is more oversized dress watch is Omega’s Co-Axial calibre 2403 automatic winding mechanism. This movement is based on Omega’s Co-Axial calibre 2500 but without the date mechanism. The 2500 was the first commercially produced Co-Axial escapement movement. The 2500 is based on the workhorse ETA 2892-A2, so you can be confident this movement will provide a lifetime of reliable service with the occasional servicing. We’d normally open a watch like this up to show off the pretty little mechanism but the delicate red wax seal is still completely intact showing the case-back has never been removed.
We are happy to supply the next owner with a complimentary 1-year warranty. It does not come with any original documentation or packaging. Our estate price for this genuine Omega rarity is $13,500.00 CAD. Stock #510-000132
Get em while you can. Oddities like the Rolex Air-King-Date are still relatively accessible in Canada and other Commonwealth countries but this is not a common watch.
Searching the internet reveals just how uncommon the Air-King-Date truly is on an international level. The rest of the world received Air-Kings with just a simple three-hand display without a calendar; the Rolex 5500 and two-tone 5501 outnumber commonwealth market “Date” models 5700 and 5701 by about 7 or 8 to 1 by our estimate.
Even though the Air-King Date is far more rare, and it offers a useful calendar display, they don’t sell for any more than the common no-date models. Our latest stainless steel Air-King-Date could very well be the rarest currently on the market. This watch comes with the original 7205/57 date coded (3/69) 13-link riveted Oyster bracelet.
I don’t know of a single other example that also comes with the original box, warranty booklet, plastic sleeve, and the original sales invoice. The invoice is from Eaton’s in Toronto and shows a purchase price of $175.00 plus 5% sales tax, on December 30, 1969.
The other interesting thing about this watch is the attractive champagne patina on the silver dial. The colour shift is uniform and almost complete. The tritium hour plots are fully intact except for one that is partially missing.
We also believe this watch has never been refinished as the lugs remain thick with appropriate edges.
The Oyster bracelet shows moderate sag with a little stretch but is fine for everyday wear and has decades of life left.
The flat buckle is prone to acquiring small scuffs and scratches but the coronet logo is still decently defined.
Despite their rarity, these watches are among the most affordable Rolex on the market. Rolex has always described these to have a case diameter of 34mm, our measurement with a digital micrometer confirms the actual size is an easy 35 plus mm. The comfortable size and light weight of less than 72 grams make them a great choice for a slim wrist. The Air-King Date features an extremely sturdy and reliable calibre 1520.
This 26-jewel automatic winding mechanism was initially developed in 1957 and stayed in service until the late 1980s. A more than 30-year run speaks volumes for reliability. This watch is running well and comes with our 1-year complimentary warranty. It is estate priced at $6,500.00 CAD. Stock #505-00099.



Brooches are making a comeback on the Hollywood red carpet. They are appearing on the lapels of fashionable women and men too who like to showcase their style. We absolutely love antique Art Deco brooches like this. They really display the exceptional skill of the artists who created them over 100 years ago. The labor involved in producing something this intricate today makes recreating one impossible. Even if we knew someone who could do it, the cost to it would be several multiples of our original example. This one dates from the earliest part of the Art Deco design era in the 1920s, when white gold was still a novel material in jewellery manufacturing. This exceptional example of filigree jewellery design measures 63.3mm in length and 7.3mm tall. There isn’t am empty area lacking the decorative filigree pierced treatment, even the edges have been embellished.
The focal point is a small 0.03 carat VS-GH European cut diamond bead set in a geometric diamond shape that is often used in Art Deco jewellery designs.
It is secured with a hinged locking pin on the back. These decorative brooches can serve double duty when worn as a pendant on almost any size of chain or cord necklace. This beautiful antique brooch is estate priced at $780.00 CAD. Stock #161-00369.
Probably the most inventive hoops we’ve encountered, twisting themselves in the ear so that they face forward. The pair also have an asymmetrical lean that hugs the jawline during wear, drawing the eye toward the face. They drop 20.5mm and are hollow constructed for comfort, weighing 2.5 grams together. The 14 karat yellow gold hoops are in like-new condition for the estate price of $350.00 CAD. Stock #e14376.
Halo designs aren’t going anywhere, especially when they look like this. The 7mm, 1.50 carat pinkish purple rhodolite garnet is about as nice as this variety gets. Perfect clarity and cut exactly the same as a 57 facet round brilliant cut diamond.
The naturally high refractive index of garnet in combination with the brilliant cut facet pattern result in a sparkling light show that few coloured gems can compete with at any price point. This is a very high quality ring manufactured by Gabriel & Co. New York.
It features 74 bead set round brilliant cut diamonds of SI-GH quality set in a three section forked shank and cushion shaped halo. The are each expertly set with four individual claws for extra security.
There has been a lot of labor used in the creation of this beautiful ring. It was cast from 14 karat white gold with a finished weight of close to 6 grams in a finger size 7 1/2. It remains in perfect condition looking unworn. The original bright white rhodium surface plating is fully intact even on the shank bottom. Like new but at roughly half the price. This Gabriel & Co. ring is estate priced at just $2,400.00 CAD. Stock #206-00615.
When I see estate rings like this I wonder why people even consider buying something new. This one likely dates from the 1940s. The economy was booming, everyone had a good job, and things were still made with pride, good quality, and often locally. This ring was made by A&A jewellers Toronto. They have been out of business since 2006 and couldn’t compete with lower quality cheaper products made offshore. They occupied a 100,000 square foot factory and employed hundreds of local craftsmen when they shut down, but their jewellery lives on. They were supplies to many independent jewellers like us and even Birks, we miss them. Our latest estate ring was hand made from premium 18 karat white gold. The geometric design is Art Deco inspiration that still has influence in todays jewellery styles. This ring has stood up remarkably well.
The shank is still thick enough not to worry about and none of the claws, beads, or channels have ever been rebuilt or repaired. The old alloys of 18 karat white gold were much harder than modern alloys and they were also much more white, not requiring rhodium plating to maintain a white finish.
The centre diamond in this pretty creation measures 5.95mm x 3.41mm and is estimated to weigh a conservative 0.73 carats. Our clarity call is also a conservative I1. The single semi-translucent feather type inclusion is hardly visible where it has been placed under a claw. We estimate the colour at an I and the overall cut is very good (a touch shallow). The shoulders are decorated with 8 bead set round single cut diamonds with milgrain edging and two bezel set baguettes. Every accent stone is original to the ring and none show any damage or chips, all are of VS-I quality or better. This ring can be adjusted in size from a 5 to an 8. The flat edge makes wedding ring selection options almost endless. For the cost of a simple custom made setting alone (without any diamonds), you can get a beautiful estate ring like this with a significant sized natural diamond that is also some Canadian jewellery manufacturing history. This ring is estate priced at $2,100.00 CAD. Stock #101-00549.
The Mille Miglia series continues as part of the Chopard racing line of watches. Model 8992 adds the additional feature of a GMT (Greenwich mean time) dual time display.
The traditional 12 hour stopwatch, calendar, tachymeter scale are much easier to interpret with the silver/white dial. Most of these watch were delivered with a rubber strap, this one came with the uncommon stainless steel bracelet with deployment buckle.
If you have a larger wrist we may need to source an extra link or two as a couple were removed at some point.
The 42mm case is water resistant to 50 meters with its screwed down case back and display window. Powering the watch is a beautifully decorated, chronometer grade Valjoux 7750 that has been modified to Chopard specifications. The watch comes with a 2019 GemScan appraisal document suggesting the replacement value with new would be $11,200.00 CAD.
It displays scratches and scuffs associated with use on the bracelet and case. We can refinish and polish most of these away if you wish. All the features are operating as designed and the watch is keeping good time.
Surfing the Chopard website shows several different Milli Miglia models but none with a dual time display, and only available with a leather or rubber strap, priced from $9,000.00 USD. Including our complimentary 1-year warranty, this retired Chopard is estate priced at $4,500.00 CAD. Stock #501-00246.
Chopard’s Happy Diamonds collection is best described by the 163 year old Swiss institution as being, “as audacious as they are playful, with their iconic dancing diamonds gently moving and twirling between two sapphire crystals, symbolizing an authentic touch of Joie de Vivre and a truly free spirit. Little diamonds do great things” This Happy Sport diamond chronograph certainly captures that spirit with its 0.35 carat total weight collection of 5 round brilliant cut diamonds.
The diamonds are of excellent quality, grading a conservative VS clarity, G colour, and all of excellent cut. They spin and twirl across the sapphire crystal sandwich with the slightest movement. A high point in the centre of each of the bezel settings causes them to spin like a top as they float around the dial. It’s a fun a mesmerizing display that adds some sparkle to the sporting nature of this watch.
It’s a large watch with a diameter of 42mm but isn’t difficult to wear. The depth of 12.6mm is quite manageable and with a comfortable weight of only 79 grams. The soft alligator strap is cut on the shorter side and comfortably fits a wrist size of up to 7 1/2 inches (longer length straps are available). This watch is in excellent condition showing only light signs of use. There are very minor scuffs and scratches on the case and bezel.
The original black strap and signed Chopard buckle look almost new.
Keeping time behind the easy to read white dial is a high precision Swiss quartz movement. This modern mechanism features a 30-minute elapsed timer with a lap time function, calendar, and timezone quick adjust. The one-way ratcheting bezel can also be used as a 60-minute timer when 1/10 of a second display accuracy isn’t necessary.
The watch is running like new with all functions operating as designed. We are happy to provide the new owner with a no-charge 1-year warranty (prorated 5 years). The watch comes with a beautiful Chopard presentation inner/outer box with a protective cardboard sleeve. The Happy Sport diamond chronograph is estate priced at $5,500.00 CAD. Stock #501-00195.
This Cartier ring has an amazing feeling on the finger. A soon as you feel it you know it is of high quality. It weighs well over two thirds of an ounce and it is premium 18 karat gold. At todays gold price of $5,775.00 Canadian (Oct. 23, 2025) this ring contains well over $3,000.00 is simply the value of gold it contains! The compound curved top isn’t simply simply a square dome, but a gentle exercise in soft gentle creases at the corners disappearing in the centre.
The optical effect is difficult to describe and impossible to photograph. The large footprint is over 4.5 square centimeters but is easy the wear if you have a finger close to a French size 58 which is around 8 1/2 to 9.
The hollow back of this design allows it to fit a slightly larger finger than the size suggests. Cartier designers did it right with this ring the smooth edges and low profile make it surprisingly comfortable. The wide shoulders and thick 5.5mm shank bottom help to keep this ring from spinning on your finger. The finger size, gold purity, and markers marks are clearly stamped inside the ring.
The lightly engraved Cartier signature, and serial number are almost completely invisible but can mostly be seen under magnification but not seen in photographs. Our goldsmiths applied a perfect polish to the completely smooth surfaces leaving a perfect mirror finish to this statement ring.
This is the sort or ring that looks right at home on a middle or index finger. Looking like it just stepped off a Paris fashion runway, this rare Cartier estate ring is priced at $$3,600.00 CAD. Stock #401-00296.
Determining whether or not natural jadeite has been artificially enhanced to improve the colour is extremely difficult to determine, even for experienced gemologists. Making the call that any jadeite is 100% unenhanced is something best left only to someone like The Gemological Institute of America. That being said we determined this jadeite is natural but we are not ready to confidently say it hasn’t been treated to improve its colour. We have factored in no extra value for this beautiful apple green 4.30 carat jadeite. Our estate price of $1,050.00 has been calculated using the gold value, diamonds, and some labor to manufacture the ring. Jadeite can occur in a wide range of colour from including purple, brownish/red, white, but the vivid greens are the most sought after, and this one has that colour. The cabochon cut measures 11.0mm x 8.5mm and is estimated to weigh 4.30 carats. It is partially framed on one side by a crescent shaped arrangement of seven bead set round brilliant cut diamonds.
The high quality VS-HI diamonds weigh an estimated 0.15 carats in total. This ring was made in a rather small finger size 5, but our onsite goldsmiths can easily make it up to three sizes larger if necessary. The soothing green colour of jadeite is very popular in Asia and reminds me of new spring growth. This ring is well made and in like new condition. Jadeite is very hard, extremely durable and is tougher than even diamonds. It remains in perfect condition, displaying excellent polish, showing no scratches or scuffs of any kind. We don’t see much jadeite around here. This pretty ring is estate priced at $1,050.00 CAD. Stock #206-00389.
Audemars Piguet, Vacheron & Constantin, and Patek Philippe are considered the holy trinity of luxury Swiss watches. Of the 3, Vacheron & Constantin’s mid-century models are an underappreciated rarity and bargain. Between 1940 and 1970 V&C produced less than 5,000 watches per year according to serial number sources. During this period, Vacheron & Constantin had a policy of producing no more than 24 examples of any reference with a specific dial, making this square case 18 karat yellow gold model scarce, to say the least.
In continuous production since 1755 has earned the esteemed brand from Geneva the honor of being the oldest watch manufacturer. We have only seen a handful of VC watches pass through our estate department over the past 60 years. It is always a treat when one shows up once or twice a decade.
Tradition runs deep among Swiss watch manufactures. A round case with a white dial and Roman numerals defined pocket watch style for hundreds of years. Vacheron was one of the first manufacturers to introduce a watch that wasn’t circular with their tonneau (barrel) shaped case in the early part of the 20th century, followed by square and rectangular watches. Our latest estate watch measures 26.3mm x 26.3mm (38.3mm including lugs). The 18 karat yellow gold case is hallmarked with the image of Helvetia. Helvetia is the female personification of Switzerland in much the same way Lady Liberty represents the United States of America.
The G part of the stamp signifies Geneva. The attention to detail and movement finish is an important Vacheron & Constantine tradition. The beautiful 17 jewel hand wind calibre V458 is running great and keeping good time. This movement is hand finished with côtes de Genève and finely bevelled plates.
It is operating at leisurely 18,000 cycles per hour with a soothing, audible, familiar tick tick tick tick tick……….. The extra-large stepped lugs give the watch more wrist presence than you’d expect for a watch of this size.
A less is more silver dial features arrowhead and Arabic hour markers, connected minute track, and subsidiary seconds hand.
As per our usual practice, we’ve elected to leave the gold case in its original unpolished condition. There are scuffs, scratches, and dings on some of the exposed edges but for a watch approaching 80 years of age, the condition is quite good.
Attached to the watch is a brand new, genuine lizard, 19mm strap with gold plated buckle. Including a complimentary 1-year Bill Le Boeuf Jewellers warranty, this rare watch is estate priced at $5,100.00 CAD. Stock number 501-00101 e14564.
The design of this wedding set is surprisingly timeless thanks to its uniqueness that doesn’t confine it to any specific trend period. Really an unsung advantage to opting for something unusual, it can never go out of style. Both the engagement ring and matching wedding band feature bezel set graduate diamonds that build as they move toward the center.
The engagement ring is crowned with a prong set GIA-certified 0.61carat round brilliant cut diamond of SI2-J quality, very good cut, excellent polish, and very good symmetry with no fluorescence. The diamond is laser inscribed to ensure you are always able to access the digital copy of its certificate. The additional 13 round brilliant cut diamonds are all of SI-H quality and push the total carat weight of the set up to 1.29 carats.
The rings are made from ultra-premium 19 karat white gold and were originally put together by Spence Diamonds. Estate price for the set only $2,975.00 CAD. Stock #101-00399.
It would be almost impossible to add any additional gem weight to this little cross pendant. It measures only 2.8cm X 2.0cm but is packed with close to three carats of natural diamonds plus a good quality blue sapphire.
This pendant is all about the precious gems with just the necessary amount of premium 18 karat yellow gold to securely hold everything in place. The diamonds are invisibly set using a seam of gold running down grooves cut into the edges holding them in place. This technique allows the diamonds to be secured in place without any claws or gold channels that would otherwise partially cover them. It’s a complicated method of setting gems that few manufacturers have been able to master. The centre gem is a nice quality dark blue sapphire that has been perfectly set in a square bezel setting. A square bezel set stone is also a difficult thing to do, at least if you want to do it without chipping a corner and keeping everything perfectly true.
Outwardly simple looking but the pendant has been created by a very skilled goldsmith. The 30 square modified brilliant cut diamonds (princess cuts) are have been custom cut for this specific application of invisible setting. They are perfectly matched in size and shape with an average quality of VS-K. Outwardly simple looking but this pendant has been created by a very skilled goldsmith. The backside of the pendant is pierced at every stone allowing easy cleaning. It is suspended by a large hinged bail able to fit a good sized chain or cord necklace through. The pendant has a total weight of 4.8 grams and is estate priced at $1,900.00 CAD. Stock #231-00385.
A timeless engagement ring featuring a 6-prong head that seems to take its inspiration from the Tiffany Solitaire, with its graceful scooping out of the prong bases. The shoulders are accented with 14 handset round brilliant cut diamonds of VS-GH quality. They cover the top half of the ring so that during wear all you see is sparkle.
The ring itself is solidly constructed from 2.8 grams of 14 karat white gold and shows no signs of wear. It currently measures a finger size 5 1/2 with some room to adjust. Accompanying the ring is a 2022 appraisal stating a very optimistic insurance value of $8,767.00.
We feel a more realistic replacement value with new would be $3,400.00 and our estate price is $2,380.00 CAD. Stock #101-00336.
Centre diamond sold. Setting available $525.00 (stock #141-00021).
Perfect condition, original bill of sale and box. They don’t come much more complete than this unless you bought it brand new yourself. But then you would also get a little something extra in the form of a much higher price tag. This ring was purchased new in December of 1998 for $3,275.00 plus tax. 17 years later the incredibly durable platinum ring is still like new, the box is smudge free, the original receipt although faded and wrinkled is still legible.
This solitaire style is still one of the most popular around and with the BIRKS history you can be 100% confident in the high quality of this item. Platinum is significantly heavier than gold so a finished weight of 5.3 grams shouldn’t come as a surprise.
The receipt shows a weight of 0.34 carats for the diamond, VS2 clarity and GH colour. No mention of the cut was made, but it is easily very good to excellent. Platinum is a much more difficult and costly precious metal to adjust. Bill Le Boeuf Jewellers will alter the current size 6.5 for you at NO CHARGE. Estate priced at $2,100.00 CAD. Stock #e9034.
Zenith; you may not know the name but you know their work. Their El Primero automatic movement almost single-handedly saved the mechanical watch in 1969 when the quartz revolution started gaining ground. Traditional manual wind watches were pretty much all that was available at the time. Most ran at reliable but slow 18,000 beats per hour. Consumers were eager for the accuracy the new technically advanced electronic quartz watches promised. Then Zenith unveiled its El Primero, the first-ever automatic chronograph tuned to run at an unheard of 36,000 vibrations per hour.
The movement was so groundbreaking until recently matched by Seiko’s High-Beat mechanism. Until the year 2000, Rolex exclusively used the El Primero movement for the Daytona chronograph, but they “detuned” the movement to run at 28,800 vibrations per hour to match the pace of their own in-house designed movements. It took Zenith 7 years to develop the 31-jewel movement masterpiece. It’s no surprise you can find it pretty much unchanged 54 years later in this exotic 18-karat rose gold 42mm Captain Chronograph Zenith El Primero 18.2110.400. This El Primero is the nicest Zenith we’ve had in a long time. Its condition is exceptional.
It looks like a shop-worn example or better.
There are only some tiny scuffs and scratches on the case, the high grade crocodile strap appears unworn. The watch has never been polished or touched up in any way. It still comes with its original plastic wrapping and case back sticker. A classic silver dial is the epitome of tradition and offers excellent contrast against the faceted hands and hour markers. The signed 18-karat rose gold buckle too remains in perfect blemish free condition.
The 42mm case features a large easy to use crown, vintage inspired rectangular pusher controls, and a display case back allowing viewing of the intricate movement through the skeletonized weight rotor.
While not considered a waterproof watch, it does come with a water-resistance rating of 50 meters in case you accidentally submerge it. The large dial allows elapsed time interpretation down to 1/10 of a second accuracy. Pictured alongside a 36mm Rolex Datejust the Zenith appears much larger than 42mm. The 6mm diameter difference is only part of the story.
As the Zenith lacks a thick bezel, the dial gains some extra surface area. A subtle date window at the 6 o’clock position adds some day-to-day utility while not upsetting the perfect balance of the rest of the dial. The curved sapphire crystal has its anti-reflective coating fully intact.
This El Primero comes with absolutely everything that was delivered with the watch when purchased new in October of 2011. Fully endorsed warranty card by Canadian authorized agents, instruction booklet, documents, tags, protective plastic, inner/outer boxes, cardboard sleeve, and a period-correct 280-page hardcover book outlining the history of the brand, the El Primero movement, and other contemporary Zenith watch models.
This watch has been retired and replaced with a similar Chronomaster model of the same 42mm size #18.3200.3600/69.C901 showing a retail price of $27,100.00 CAD on the Zenith website. The watch is accompanied by a one-year Bill Le Boeuf Jewellers warranty. Estate priced at $13,900.00 CAD. Stock #501-00229.
This is another watch I really like. I have never seen one of these before. It’s 18-karat gold with a titanium bezel insert and bracelet centre sections. It is on the small side measuring 31.5mm in diameter and would fit well on a man with a thinner wrist or a lady that wants something a little bigger. It will fit a wrist size of close to 8 inches as the bracelet and case measure 20cm long.
The watch weighs 88 grams in total and looks like it was only worn on special occasions. If you assume the non precious metal components in this watch weigh around 28 grams (likely less) than leaves around $6,650.00 in just the recyclable gold content at today’s gold price (May 21, 2025). Comes with its original box and most paperwork in excellent condition. The Swiss-made Omega calibre 1444 quartz movement that powers the watch is working perfectly keeping excellent time.
The two small extra hands on the dial display the day of the week along with the day of the month. The 49019121 serial number places production from approximately 1986. The estate price including a 1-year Bill Le Boeuf Jewellers warranty is $7,500.00, CAD. Stock #510-00036 e5990. 
Who would have ever thought that precious 18 karat gold could be paired with rubber to make luxury jewellery. High end Swiss watch brands have been doing just that for many years. Even some well know jewellery brands like Cartier, Chopard, Saro, Bvlgari, Van Cleef & Arpels have been known to use rubber components in their designs. Baraka in an Italian manufacturer who aren’t afraid to blend premium 18 karat gold with innovative materials like ceramic, 316L stainless steel with high tech PVD coatings. Italy has always been the design capital of the world for many industries. The Baraka website showcases some very edgy and fashionable designs are in keeping with the Italian tradition for pushing the style envelope.
Baraka designs showcase complicated manufacturing techniques and beautifully engineered proprietary components like the patented clasp on our latest bracelet. The clasp showcases a small diamond in the release trigger. This clasp is made up from no less than 13 separate parts all working together forming a beautiful esthetic with incredible security, far better than your typical spring loaded clasp. Almost every spring loaded clasp uses steel to supply resistance for the closing mechanism. Baraka have used a 7 sided flat piece of white gold sheet that has been annealed to make harder and to supply spring resistance.
This section is secured by 4 heavy rivets into a frame. Rivets are used because soldering the pieces together would fuse the parts and soften the metal. An interference trigger (also rivetted) with a small diamond forms the close/release trigger. It take a strong fingernail and significant force to open and close this clever clasp.
Functional and attractive, this is the focal point of the bracelet, not something you’d want the hide on the backside of your wrist. The two other hinged sections have been crafted with complicated joints using multiple parts made from 18 karat white and rose gold.
This bracelet measures just 7 inches in overall length, so it would be most suited to a lady’s wrist or slender gentleman. The bracelet weighs 12.7 grams including the three rubber sections. We feel the net weight of just the 18 karat parts of this bracelet weight around 10 grams. It is in original condition and never been polished. The gold sections display some minor scratches to the rose gold and white rhodium finish the top but the inside edges are almost perfect.
This rare Baraka piece is estate priced at $1,890.00 CAD. Stock #441-00389.
Forgive our photography, this irradiated teal diamond is exactly the colour of a Montana sapphire in person. But, being a diamond, it is gifted with diamond high dispersion (sparkle) and fire (converting white light into coloured light). Which results in a brooding gem that dances between teal, bright green, and blue.
The rectangular princess cut weighs approximately 1.00 carat of an almost eye-clean I1 clarity thanks to its darker tones disguising the grade-setting inclusions. The shoulders and halo of the ring are studded with 72 petite round brilliant cut diamonds of nice VS-G quality. They bring the total diamond weight of the ring up to 1.40 carats.
The ring itself is solidly constructed from brightly rhodium plated 14 karat white gold and currently measures a finger size 6 1/2 with some room to adjust. The estate price for the like-new ring is $3,150.00 CAD. Stock #131-00146.
What could be more appropriate than a diamond set crown for the King of the Jungle? Ironic really as lions primarily live on the grasslands and plains of Africa and not in the jungle, but who’s going to argue with a lion? This is a fun piece recently traded in to our estate department. It contains around 200 tiny round single cut diamonds estimated to weigh approximately 0.40 carats in total. They are of I1-I quality and have each been hand set in 4 prong settings. This is an impressive well made 3-dimensional pendant that twinkles and sparkles with the slightest movement. The piercing eyes are 2 small black diamonds. The extra large hinged bail will accommodate almost any chain with a diameter or width of up to 7mm. The finished pendant weighs 9.2 grams and is in perfect condition. This fearsome depiction of the “King of the Grasslands and Plains” is estate priced at $805.00 CAD. Stock #161-00189.
Every watch collection needs a cornerstone piece. For the Rolex collector that piece is likely a Daytona, a Submariner, or a GMT-Master. These three models are the holy trinity for anyone interested in Geneve’s most famous brand. Any 4-digit reference, plastic crystal, Rolex sports model is a rarity these days and seldom come to market. Our latest estate Rolex is a very special example of a Rolex 1675 GMT-Master. The watch dates from the second half of 1967 and has only had one owner since it was purchased brand new at Alteen’s Jewellery, Sydney Nova Scotia on December 19, 1968.
It was a cherished possession for over 50 years and was carefully worn on a regular basis by its one and only owner. In the 1940s and 50s international travel was catching on and pilots required an easy way to keep track of local time and Greenwich meantime. GMT is a constant time that doesn’t change with the seasons and is the international reference point to which all local time zones are calculated. The simple rotating bezel can be rotated to show GMT using the second long red hour hand in a 24-hour format with the daylight hours indicated in the red zone and dark nighttime hours shown in blue.
This simple format has been the standard display since the Rolex GMT-Master was introduced in 1954. This 1967 example is the best, most complete 1675 GMT we’ve ever had. It comes with a couple of accessories we’ve never ever seen before. Accompanying the watch is a small green plastic clip that would have attached to the Oyster bracelet when on display in the jeweller’s showcase.
The first and only owner carefully preserved the original metal foil Rolex price tag of just $295.00 Canadian, and the foil “Swimpruf” Oyster tag. The back of the tag is labeled with some of the watch details and the corresponding serial number.
All the other documents are original, correct and in very good to excellent condition. It is exceedingly rare to find any Rolex with this amount of original documentation.

Completing the package are the inner/outer boxes and red plastic chronometer hang-tag, all in well-preserved condition.
To our knowledge, the watch was only ever serviced through Rolex Canada. The case-back service etching confirms this statement as there is only one record, and it corresponds with a Rolex service guarantee tag and invoice receipt issued in June 1990 for $444.00.
There are no missing chapters to the story of this watch. When serviced in 1990 at Rolex Canada it is assumed the “Pepsi” red/blue bezel insert was replaced, along with the crystal and date-ring. We believe the rest of the watch is original except perhaps one of the bracelet end pieces that is stamped 380. The 13 link, folded/rivet 7206 bracelet is in excellent condition showing only minor sag and little stretch. The buckle is clearly stamped with a production date of 2/68.
The matt black dial is absolutely perfect, with no stains, scuffs, or scratches of any kind. The 11 luminous tritium hour plots are completely intact, showing an even patina of a slight parchment hue. The four 18 karat white gold tritium hands match perfectly and are also in excellent condition. The more we examine the watch we more we appreciate the honest representation. Aside from a light surface cleaning we have left the watch in the condition presented to us. Light scratches and softening of the beveled case edges are to be expected for a watch that is 58 years old. It may be impossible to find a better example of a one-owner, GMT-Master. Never mind it is Canadian delivered, this may be one of the best, most complete vintage GMTs available anywhere. We’ll let the pictures do some talking.











Rolex sports watches have turned out to be an unlikely investment for more than 60 years. Values for watches like this have increased in double digit factors. Excellent condition, collectible Rolex watches have always seemed expensive, except in hindsight. We are happy to provide the next owner with a complimentary 1-year warranty. Stock #505-00086.
Viewing by appointment only.
Aaron Basha is the “Godfather of Charms” for good reason! The founder’s playful designs were sparked by the birth of his first grandchild, for whom he designed a collection of jewel-encrusted baby shoes. Now in their third generation of family ownership, the New York-based jewellery institution boasts a broad range of “magical treasures for the child at heart”. Despite their instantly recognizable playfulness, there’s nothing cute about the price points attached to these Italian-made charms. The “A” Initial Charm is currently listed on their website for $4,400.00 USD. Made from 4.7 grams of high quality 18 karat white gold, the enameled and bowtied A stands 25.3mm tall (including its bail).
The bow and bail are hand-set with 0.08 carats of high quality, petite round brilliant cut diamonds. Perfect condition and estate priced at $2,860.00 CAD. Stock #161-00045 e14253.
It may look like a familiar watch but it’s actually somewhat new (at least by Rolex standards). Well, perhaps it is not completely new but rather an evolution of the most popular watch in the world. Much like the width of a gentleman’s tie or the length of a lady’s skirt, watch dimensions ebb and flow. This generation of the classic 36mm Datejust debuted in early 2018 with narrower lugs and slight tweaks to the case, dial, and bezel. It follows the traditional balanced look of the original 1945 Datejust. A more significant change can be found inside the 100m watertight Oyster case.
The old calibre 3135 has been replaced with the all-new calibre 3235. A new movement isn’t something that happens very often for Rolex, the 3135 saw duty in the many Rolex watches from 1988 until 2019. The new movement isn’t an evolution of the 3135 as over 90% of the parts are redesigned or different. The 3235 features a completely new type of escapement (the heart of a movement), a modified barrel design that allows for a longer mainspring for an extended power reserve, a new winding module to increase efficiency, and tighter accuracy tolerances. In keeping with the Rolex philosophy of “in-house” manufacture, they have improved gear train efficiency by developing their own proprietary lubricants. Even though the movement is rarely seen and only by qualified watchmakers, they have even refined the aesthetic finishes on the mechanism. All these improvements ultimately provide the wearer with an extremely accurate, dependable, robust timepiece with a long 70-hour power reserve. They have even tightened up the accuracy tolerances to a claimed plus or minus of around 2 seconds per day. This Datejust is absolutely perfect in every way and has never been worn. It features the upgraded 18 karat white gold fluted bezel and factory diamond dial. The radial finish sunburst blue dial with the Oyster bracelet offers a slightly sportier look compared to the Jubilee style and the diamonds add a touch of sophisticated sparkle. Hidden under the embossed buckle is a clever extension that allows a 5mm length adjustment without the need for any tools, on days when a bit of extra room is more comfortable.
At 36mm this watch is perfect for the lady who likes something a bit bigger but not a cartoon or the slim gentleman who doesn’t like the bulk of a 40mm Professional model. The watch comes with everything as delivered from the original authorized Rolex agent. Full documents, booklets, endorsed warranty card, inner/outer boxes, chronometer hang tag, foam box liner, white cardboard protective box sleeve, clear plastic bezel guard, and even a large Rolex shopping bag. There are still many of the original protective plastic stickers on the buckle, case back, and lugs. The next owner will benefit from the 5-year international Rolex warranty until the spring of 2027.
While not as difficult to find as a Daytona or Submariner, a stainless steel with white gold, blue dial Datejust is not a watch seen often in the showcase of your local Rolex agent. This brand new, never worn, perfect condition Datejust 126234 is estate priced at $17,340.00 CAD. Stock #505-00238
Some jewellery styles just age better than others. The 80s had more than their fair share of fashion flops when it came to jewellery design, but the herringbone necklace wasn’t one of them. These flattened link classics are still popular with our customers looking for vintage estate jewellery. In fact they sell so well we can’t understand why they are no longer being produced. This one is a survivor and remains in excellent condition showing no areas of stress or kinks. It measures a significant 3.5mm wide and is quite thick at 0.7mm.
When these are made too thin they can easily kink and invisibly repairing them is next to impossible for even a very skilled goldsmith. The shorter length of 16 inches, heavier gauge, and slightly harder 10 karat construction should help protect this example from damage caused by creasing. These herringbone necklaces look almost like a seamless ribbon of gold that contours to the neckline. The flat surface with beveled edges catch the light better than almost any other chain style.
It is secured by an easy to operate good sized lobster clasp. This necklace is in excellent condition showing no wear. It is estate priced at $700.00 CAD. Stock #431-00735.
The sapphires you’re likely to encounter at your the local jewellery store certainly don’t look like this, either in size, colour, or transparency. This is a very special ring that we are thrilled to showcase for you. We don’t see many 7 carat sapphires of even marginal quality normally.
We think this example comes from Ceylon (Sri Lanka). The bright, sightly violet blue is typical from this part of the world, but not the size. It’s cushion shaped dimensions of 11.8mm x 9.5mm x 6.4mm suggest it weighs somewhere around 7.15 carats.
Sapphires make a great alternative to diamonds when it comes to an engagement ring. They are second hardest of all gemstones, their colour is stable and doesn’t fade over time. They can also stand up to heat encountered when the ring is being sized or retipped. The most famous recipient of a sapphire engagement ring was the late Princess Diana who received her 12 carat oval Ceylon sapphire in 1981. From what we understand, Prince Charles purchased the ring as an off the shelf item from luxury jeweller Asprey in London for the equivalent of $60,000.00 USD back in 1981.
Today her original ring is being worn by Catherine the Princess of Wales as her engagement ring. The only regal connection we can make with our version is the “royal” blue hue. Styled in much the same fashion as Diana’s on a smaller scale, our ring is surrounded by 14 round brilliant cut diamonds (just like Diana’s). It is also crafted in premium 18 karat white gold as is Diana’s. The shoulders on our estate ring have been pave set with an additional 68 tiny brilliant cut diamonds. All of the natural diamonds are of SI-GH quality. A decorative filigree scroll pattern keeps the ring from being top heavy and adds some delicate elegance to the design.
This ring is in remarkable condition looking almost unworn. It still retains its original finish and has never been repolished or re-rhodium plated. There is zero wear on any of the claws securing the sapphire and diamonds. The ring measures a slightly larger 8 1/2 but can be made a few sizes smaller if necessary. This would be a very difficult ring to replace as Ceylon sapphires of this size and shaped are quite rare and very expensive. Engagement ring or dinner ring, this one of a kind sapphire would make the lady in your life feel like a princess for the rest of time. It is estate priced at $17,500.00 CAD. Stock #206-00518.
You can’t get a higher gold content in white gold than 19 karat. At just under 80% gold content this unique metal is much heavier than 14 karat and for sensitive skin it is less likely to cause any irritation due to the lower alloy content. Perfect condition, appearing unworn the highly polished rhodium finish is fully intact and scratch free. A very good to excellent cut Canadian diamond is secured in the traditional 4 claw setting measuring 5.33mm diameter estimated to weight 0.60 carats of SI1-SI2-H quality. A maple leaf logo and unique serial number has been engraved along the diamond edge.
A matching 19 karat white gold wedding ring is included, containing 12 nice quality SI-H round brilliant cut diamonds all neatly channel set half way around the ring. Weighing 6.6 grams and measuring a rather small size 4.5 this set will fit the smaller more petite lady. Sizing the rings larger would not be a problem. Two appraisals supplied by Accurate Gemological Laboratories Inc. Toronto dated August 2014 are also included with the set.
“Accurate” Gem Labs describe the diamond qualities a little more optimistically than my opinion would be. Likewise their opinion of value is quite a bit more than ours at $7,800.00. We feel a ring set like this is more realistically replaceable for closer to $3,750.00. As estate items they are priced at $2,625.00 for the set only. Stock #e8624.
These basic 4 prong stud earrings have been decorated with a frilly buttercup frame. Each earring contains a bright I1 to I2 clarity diamond of I colour. Each diamond has just 1grade setting inclusion that has been carefully positioned under a claw to minimize its impact. Each inclusion is clearly visible but that doesn’t mean these diamonds don’t sparkle and twinkle like a much high clarity/colour diamond. They each measure a full 4.65-4.70mm diameter and are both well matched and nicely cut. They are securely set into 14 karat white gold buttercup flower design settings that measure 10mm in diameter. The earrings are secured by long threaded posts with threaded backs. Total weight 2.0 grams. Estate price $1,050.00 CAD. Stock #151-00182.

Everyone has different priorities when shopping for an engagement and wedding ring set. Some couples want a big statement and will happily sacrifice quality in favor of size. If that isn’t your jewellery philosophy than this set is definitely worth your consideration. Featuring 0.61 carat total weight of exceptionally lively VS-H quality round brilliant cut diamonds this set doesn’t need gargantuan size to turn heads. The rings themselves continue the theme of high quality; consisting of 9 grams of bright white curving platinum. The set currently measures a size 5 1/2 with lots of room to go up or down. Estate price $2,100.00 CAD. Stock #e9962.
The Art Deco period from the 1920s to 1930s was influential throughout society and changed the way almost everything was styled. Architecture, automotive, to even household products, almost everything received the geometric treatment with opulent materials and bold colour contrasts. Trends come and go but classic style endures. Original Art Deco jewellery is among the most popular with our estate jewellery customers. These sapphire and diamond earrings look like an original from the 1920s but they are actually of modern Canadian manufacture by Crescendo Jewellery Toronto. High quality and proudly made in Canada have always been hallmarks of the brand. Crescendo were one of Bill Le Boeuf Jewellers first suppliers when our business opened over 65 years ago. These earrings weigh a substantial 7.6 grams in upgraded 14 karat yellow and white gold.
The two-tone appearance isn’t artificially achieved with a simple rhodium plating on yellow gold but a separate white gold cast section soldered to a yellow gold frame. The earrings have been hand set with 50 natural round brilliant cut diamonds of very nice SI-I quality. The focal point of each earring is the bezel set oval blue sapphire in the centre. Each sapphire measures approximately 6mm x 4mm and are estimated to weight 1.00 carats in total. They exhibit a strong bright blue colour and have very good clarity. Spring loaded Omega backs over wire posts secure the earrings and keep them in place.
Pressure from the spring backs help disperse the weight of the 20.5mm long earrings. They are in excellent condition showing no areas on wear.
We have a Crescendo Jewellery catalogue that still shows these earrings (model E1698) along with a matching pendant if you wanted to build a set. The earrings are estate priced at $2,600.00 CAD. Stock #211-00228.
We know you love our estate earrings. Contemporary, retro, vintage, or antique, they are all popular with our customers. Our walk-in customers get to see almost everything we have in stock; unfortunately, our online clients only see what time allows us to post on our website. We’d love to post everything, but there simply isn’t enough time. Here’s our way of “killing 6 birds with one stone”. These six pair of 14 karat yellow gold earrings are simply being sold by their weight.
This isn’t the most accurate or scientific way of pricing them but it isn’t too far off either. Some of these are set with genuine gems and diamonds that weren’t considered in the pricing formula, just the gross weight.
Some are of a more complex construction that should reflect a higher cost, but not in this case. Just the weight and only the weight. A couple of pair are modern but most are fun funky retro designs.
They range in weight from 2.2 grams to 7.4 grams and are priced from $281.00 to $947.00 CAD. All are in excellent condition and come in our traditional Bill Le Boeuf Jewellers dark blue box (gift-wrapped if you wish). Stock #426-00117 to 426-00120, 211-00083 and 211-00084.
Stars are SOLD 
Balls are SOLD ![]()
Garnets are SOLD
Citrine/Garnet are SOLD 
Maple leaf SOLD 
In keeping with the popularity of large, overachieving watches, we present this Breitling Avenger II Seawolf (even the name is impressive). This is one of Breitling’s most qualified diver’s watches. It is water-resistant to an indicated 10,000 feet or 3,000 meters. The water pressure at this depth is well over 2 tons per square inch. Incorporated into the 45mm stainless steel case is an automatic helium escape valve.
This feature may come in handy if you decide to do a really really deep dive, requiring living in a diving bell breathing a mixture of helium and oxygen for extended periods of time. Pressurized helium gas can penetrate the case gaskets and push the crystal out when decompressing if the watch isn’t equipped with such a valve. It does make for an interesting conversation point if someone asks what the little button on the side is for. The rest of the watch is pretty typical for most luxury diver watches. A one-way 60-minute bezel timer, threaded crown, screwed on case back, and heavy stainless steel bracelet with locking buckle round out the diver features.
Large, thick, luminous hands and hour markers provide excellent legibility in any condition or situation.
It comes complete with a Breitling inner/outer box, extra green rubber BREITLING embossed strap with signed buckle, a generic NATO nylon striped strap and a Breitling signed NATO style buckle.
All accessories and straps are in perfect condition. The watch is in very good to excellent condition, showing only minor scuffs and scratches on the case and bracelet.
These minor blemishes can be removed while you wait if you’d like the watch to look perfect. Included with purchase is our complimentary one year warranty. The watch is estate priced at $3,500.00 CAD. Stock #515-00108.

The two diamond feathers that make up this dinner ring are deeply contoured at multiple angles to maximize the play of light. At the slightest movement, the ring is covered with splintery flashes of white and every-coloured light. During wear, the white gold shoulders disappear showing only the 136 hand set diamonds that adorn each feather. Together they make an approximate 1.75 carats of I1-I2-G quality brilliance. The size 8 1/2 ring has been designed to sit on a middle or pointer finger and covers the whole digit when worn. Each graceful feather bends gently upward, floating at a proud 8.2mm above the finger top. The 7.7 gram 14 karat statement ring is estate priced at $2,100.00 CAD. Stock #e11967.
Thomas Alt was a Montreal based jeweller from a long line of German goldsmiths. Both of his parents were raised in Idar-Oberstien, once the world center for gem trade, the cradle of Art Deco design, and the modern home to many master stone cutters. His family’s roots in the jewellery trade date back 200 years. You can tell from his expressive and confident work that he was raised into this trade. Our limited edition Thomas Alt screw back earrings measure a statement making 19.6mm diameter. The high dome 14 karat yellow gold bases have been decorated with subtly white gold wire work. The gestural framework creates an artistic nest around the asymmetrical diamond focal points. Both diamonds are of a high VS1 clarity, I colour and together weigh an estimated 0.57 carats. The diamonds throw an eye-catching spray of spectral colour and bright white flashes. The 11.79 gram pair are accompanied by a Thomas Alt signed certificate stating their limited edition along with a 27 year old Certificate of Appraisal stating a retail value of $3,300.00 CAD.
Our estate price $2,800.00 CAD. For an additional $150.00 the pair can be converted to pierced studs with heavyweight friction backs. Stock #e11335.
Tag Heuer’s Link model has maintained key design elements since its introduction as the S/el (sports elegance) back in 1987. Over the years is has become a more dress and less sports model. This ladies 29mm example dates from 2013. A string of bead set, high quality VS-FG round brilliant cut diamond replaces the timer bezel seen on most Tag Heuer sports models.
Instead of luminous hour markers on the dial it showcases more diamonds. It is still water resistant with a sapphire crystal and sturdy stainless steel bracelet, but these models are more likely to see dressy events than scuba diving.
It is powered by an ultra reliable and accurate Swiss quartz movement with calendar display. Comes complete with everything originally delivered from the authorized Tag Heuer agent. The full length bracelet will accommodate a wrist size of close to 8 inches.
When last available this watch came with a retail price of $5,650.00 USD. After a light polish it looks almost like new. The sapphire crystal shows a few small scratches and impact marks, that most likely occurred from rubbing against a diamond ring. They remain pretty much invisible due the the patterned silver dial.
The watch is running well and keeping perfect time. This one owner watch was recently traded in for a Rolex from the original owner. We are happy to supply the next owner with a complimentary one year warranty. It is estate priced at $4,000.00 CAD. Stock #520-00115.
We acknowledge how popular lab-grown diamonds are, and the fact they are much less expensive than their natural counterparts. But did you know just how inexpensive they really are? The hot market for lab-grown diamonds means there is a huge range in retail prices depending where you are buying. Here is a screen shot of our pricing for exceptional quality 1.00 carat round brilliant lab-grown diamonds of minimum VVS2-F quality with excellent cut, symmetry, and polish. The average retail price is only $359.00 (U.S. dollars).
A natural diamond of the same quality will cost you at least 20-25 times more!!! Be an informed consumer. Don’t pay more than you need to for a lab-grown or natural diamond, shop around and compare apples to apples, you’ll be shocked by the range in pricing. Our latest diamond is not a lab-grown and it isn’t ultra high quality but it is a great opportunity to buy a 1.00 carat natural for a great price.
The antique diamond is conservatively graded I1 clarity with a J colour. This diamond is around 100 years old and displays a few minor chips along the edge as evidence of a life well loved.
At some point in it’s history the diamond was remounted into a more contemporary 18 karat yellow and white gold setting by BIRKS.
The ring is in very good condition and ready to enjoy for decades to come. The size 6 ring has a flat edge and will fit nicely with almost any existing wedding/anniversary ring.
New, estate, natural, or lab-grown, Bill Le Boeuf Jewellers always offer consistent excellent value. This one offers a lot of natural sparkle for just $2,482.00 CAD. Stock #101-00528.
Nothing spelled out middle success in the 1970s more than the suburban home with a 2 car garage, a station wagon, and a Rolex Datejust. There are many ways to describe such an iconic model. Rolex describes it as the “Classic Watch of Reference”. Classic indeed, the Datejust has been around since 1945 and looks pretty much the same today as when it debuted. Our latest estate Rolex is one of the most commonly encountered, but that doesn’t mean it shouldn’t be on the list for anyone looking to get into the vintage Rolex scene or the seasoned collector.
These mid-sized 36mm watches are the Goldilocks size for the average size guy or lady that prefers something a bit larger but not over the top. Too many watches today are simply overwhelming for the average to smaller wrist size. 50 years ago watches were essential tools for everyday life, not the lifestyle statements they are today. A Rolex from the early 70s was for many the high point for mechanical watches. Bulova’s Accutron was the height of precision with some very clever tuning fork transistorized mechanics. Evolving technology, toxic mercury batteries, and no parts supply spelled an end to the high-pitched hum of the Accutron. A Rolex movement from this era was still hand-assembled and adjusted by hand with tiny screws located on the rim of the balance wheel.
Turning these tiny screws in or out allowed Rolex’s watchmakers to poise the wheel giving it perfect balance. Rolex wasn’t the pure luxury item they are today. Rolex had to keep their costs in mind as there were other brands competing for the baby boomer dollar. In order to avoid heavy import duties, Rolex had some of their bracelets made in the USA with lower purity 14 karat gold trim instead of the Swiss Made bracelets with 18 karat.
These American-made bracelets are super comfortable. Their steel oval link sections and hollow gold middle conform to every wrist contour. Even when they were new they had a loose feel, the hollow links made a jingle sound unique to this bracelet.
This example shows significant sag that really doesn’t illustrate the overall condition. You need to look at the wear and gapping when viewed from the top. This watch shows only a small amount of wear and grooving between the gold links.
This bracelet likely has another 50 years left in it if keep clean. The fluted bezel is still quite crisp for a watch in its 6th decade.
The best part of this watch is the unique bronze dial. I think this dial has colour shifted from a silver hue to what we see today. The subtle dial is much different than the typical champagne and silver often seen on this model. The luminous tritium hands and hour plots display even patina. There is usually an hour plot or two damaged or missing on these watches and this one is no different. The 8 o’clock lume pip is almost gone.
When looking closely at the dial we see the hour markers are not the common dome or hash mark style. They are sloped and faceted. This style marker is quite unusual and adds to the vintage look. Installation of a new Rolex plastic crystal and basic case cleaning was all that was required to get this classic ready for a new home.
Including a 1-year Bill Le Boeuf Jewellers warranty (prorated for 5 years), this classic Rolex is estate priced at $7,000.00 CAD. Stock #505-00206.
2009 Jaeger-LeCoultre Master Control 147.8.37.S. 40mm stainless steel case and bracelet, extra dark brown alligator strap with signed JLC folding buckle, comes with original boxes, documents, endorsed Canadian agent warranty card. 32 jewel automatic movement calibre 899 with 22 karat gold rotor edge. Very good overall condition. The leather strap is in fair condition. Comes with a 1-year warranty. The estate price is $6,000.00 CAD. Stock #e14574 501-00104








Buying a significant diamond is unlike almost anything else you can spend a paycheque on. The economy of scale doesn’t really work with diamonds as it does with other items. There is a general rule when it comes to the price of diamonds; as the size doubles, the price quadruples. For example, a nice 1.00 carat GIA certified, VS2-F, excellent cut, excellent polish, excellent symmetry, none fluorescent, round diamond sells for around $10,000.00 CAD (if competitively priced). A 2.00-carat version of the same quality goes for around $35,000.00. Up that to a 4.00 carat and you’re talking about $140,000.00. Big diamonds are exponentially more rare than small diamonds, and finding one of high quality ups the rarity factor much more. It’s always exciting for us when a large diamond arrives in our estate department. This 4.28 carat whopper is cut exactly the same as a tiny diamond weighing only 0.01 carat. Every round brilliant cut diamond has 57 facets regardless of its size. Big diamonds are more attractive because they have more surface area for sparkling reflections. The bigger the diamond, the longer it takes for light to travel inside and then exit in a rainbow of dispersion much more than a small diamond could. Few jewellery stores carry diamonds much bigger than about 1.50 to 2.00 carats. Bill Le Boeuf Jewellers always have some in the 3.00 to 5.00 carat size. Even if you don’t think a big diamond is for you, you should have a look at a large, well-cut, good quality, diamond and find out just how contagious our excitement is. Our latest diamond has a lot going for it. Eye clean VS2 clarity means no blemishes or inclusions can be seen without artificial magnification.
A very good cut, excellent polish, very good symmetry and no fluorescence make this diamond sparkle like a disco ball. The M colour displays a very slight yellow hue but far less than the M colour grade may lead you to believe. The Gemological Institute of America report is your assurance of impartial quality assessment. NEVER accept anything but a GIA report. Many other certificates and appraisals can be biased and sometimes downright inaccurate. There is no substitute for a GIA diamond grading report. If you’d like a second opinion of quality this diamond also comes with an International Gemological Institute (IGI) report stating the quality as VS2-L (one colour grade higher than that of the GIA). Let’s make an incredible ring together using this diamond. Our onsite goldsmiths and designers are eager to create something truly remarkable to showcase this beautiful stone. You can see a short YouTube video of this diamond here. Email us your number and we’ll WhatsApp you a better quality video. The diamond comes with its original laminated GIA report and a copy of the IGI report. Stock #191-00026 e14313.
SOLD
When we custom made these earrings a few years ago we weren’t exactly reinventing the wheel, but I bet you haven’t seen another pair like them before. The first thing you notice is the large size of 5.0cm diameter x 2.5mm wide. Long or short hair, there is no way anyone is going to miss seeing these.
The second thing you notice is the solid construction, saving a few dollars by making them hollow wasn’t something we were interested in doing. They weigh well over half an ounce at 16.6 grams in 14 karat white gold. The third thing is the chunky reflections and sparkles from the 1.7mm diameter diamonds.
Diamonds this size don’t usually “twinkle” like this; that’s because we selected 17 facet single cut diamonds for this project and not the typical 57 facet round brilliant cut diamond. Round brilliant cut diamonds twinkle and reflect the same amount of light as single cuts but in much smaller bits. This is a great example of less is more and it’s one of the reasons Rolex selects 17 facet single cut diamonds for decorating diamond dial watches. In good quality, single cut diamonds simply look better than full cuts. The 80 diamonds we hand selected from 1000s exhibited superior cut and with good clarity and colour.
They average SI-GH in quality. This pair of Bill Le Boeuf Jewellers originals were traded in for something different by the original owner. They remain in very good condition with the rhodium plating fully intact. They show fine scratches and scuffs on the exposed polished surfaces but nothing requiring a fresh polish or re-rhodium plating. If you’re able to stop by, we’d love to show you how a simple high quality single cut diamond can look better than the more complicated 57 facet brilliant cut. If we had to hand make them today with gold at all time highs, it would cost over $5,000.00. This custom made estate pair is priced at just $3,500.00 CAD. Stock #151-00304.
SOLD
For a fresh look, a Rolex with a leather strap gives any Oyster case Rolex a completely different personality. You wouldn’t know it by casual observation, but this Oyster Date 1500 is almost a senior citizen. According to the serial number and the date code on the case back this classic Rolex was produced during the 2nd half of 1961. At that time it likely had a retail price of around around $150.00.
Buying a brand new contemporary Rolex with a date display is going to run you $9,800.00 CAD. In 2021 the Rolex Date was retired.
If you wanted to buy that sweet spot 34mm Rolex, you’ll have to settle for an Oyster without a date display; the Datejust now only comes in 31, 36, and 41mm or the 28mm “Lady DateJust”. Powering this vintage Rolex is the venerable in house manufactured 25 jewel calibre 1560.
It is functioning flawlessly and completely fills the compact stainless steel case. It’s low frequency of 18,000 beats per hour is clearly visible as power pulses through the second hand at a more leisurely pace. Modern Rolex movements operate at a much more frantic speed of 28,800, the increased rate translates to a more fluid motion to the sweeping seconds hand. The relaxed pace of our vintage Date doesn’t mean this watch isn’t accurate. Calibre 1560 still conforms to Switzerland’s strict standards to qualify for chronometer status. With independent confirmation, Rolex proudly display this feature on every watch that earns the distinction.
A flawless silver sunburst dial features its original tritium plots that are all completely intact and dome shaped 18 karat white gold hash mark hour markers. A never worn, custom made tan crocodile strap has been attached between the 19mm lug span.
Aaron Bespoke from Montreal crafts high quality straps in a wide range of colours from various leathers and fabrics. Ordering a strap like this from Arron Bespoke will cost you over $300.00.
Attached to padded and stitched strap is a hard to find stainless steel Rolex tang buckle.
The Rolex 34mm Date on a leather strap is a great choice for a slim gentleman who doesn’t want/need a larger and heavier Rolex.
These are also a fun choice for the fashionable woman. Drilled Holes in the lugs along swapping for a different colour strap in less than a minute, even faster if with quick release spring bars.
The watch is functioning flawlessly and keeping great time. Including our complimentary 1-year warranty this Rolex 1500 Oyster Date is estate priced at $3,800.00 CAD. Stock #505-00446.
SOLD
Concord was founded in Switzerland in 1908. The brand was created to design luxury timepieces for the burgeoning affluent American market. Often their watches incorporated precious metals and gems making them more than just high quality time keepers. In 1915 Concord started to manufacture watches for jewellery greats Tiffany, Van Cleef & Arpels and even Cartier. It was a Concord watch presented to Winston Churchill and Joseph Stalin by President Truman during the World War II peace talks. During the quartz crisis of the 1980s that nearly crippled the Swiss watch industry, Concord thrived by designing and manufacturing some of the most expensive quartz watches ever to be seen on the market.
In the 1970s and 80s their quartz technology allowed them to produce extremely thin and sleek designs; some measuring less than 2mm thick. Our ladies Concord Saratoga 15 73 287 is a classic and elegant dress watch with a touch of bling. A synthetic sapphire crystal protects a beautiful embossed silver diamond featuring gold Roman numerals and a date aperture at 3 o’clock.
The solid 18 karat bezel is bead set with 16 round brilliant cut diamonds of excellent VS-GH quality totaling 0.35 carats. Concord really go the extra mile in terms of quality. 18 karat gold trim runs the entire length of the bracelet and is of solid construction, it’s far heavier than many of the gold laminated designs seen in other brands.
Each adjustable link is secured by 2 threaded screws compared to many brands who secure their links with only a simple split pin rivet or bushed friction pin. The case back on the Saratoga is held on by 4 screws not a basic interference snap on back.
Even though this watch is not designed to be waterproof it passed our vacuum test for water resistance so it wasn’t a concern when it we submerged the entire watch in our ultrasonic cleaner. At just 23mm diameter this watch would be perfect for the slim wrist lady who is looking for a versatile watch that can be worn for almost any event or activity. Equipped with a Swiss quartz high precision movement that is keeping excellent time. The watch is in very good condition and appears never to have been polished or refinished in any way, aside from the bracelet edges only. Including a 1 year complimentary warranty the watch is estate priced at $1,900.00 CAD. Stock 501-00391.
In the event you’re feeling some winter cabin fever, be grateful you’re not from this Canadian diamond’s home. The average winter temperature in the Northwest Territories is -40 C, even their summers rarely rise above +25 C! Fitting though that such icy gemstones should be found in that epic environment. This 0.50 carat round brilliant cut Canadian Ice brand diamond is an offering from Ben Moss Jewellers. The diamond is a nice I1-G and faces up larger than you’d expect thanks to the ring’s tapered shoulders.
That classic 14 karat white gold solitaire hides some delicate scrollwork in its under -gallery, providing graceful accents only the wearer will know about.
The 2.9 gram engagement ring is accompanied by all of its original paperwork and “Mountie red” boxes. Estate price $1,330.00 CAD. Stock #e13890
The tulip shank is the perfect balance of durable and delicate. Its shoulders rise up high and solid to maintain durability while allowing the shoulders to taper dramatically towards the center diamond. That taper gives the impression of the center diamond being much larger than it is, making this 0.37 carat a worthy crown for such a thoughtful piece. The diamond is an eye-clean SI1-I, well matched to the 0.21 carats of SI-H round brilliant cuts that run down each shoulder. At 3.5 grams the 14 karat white gold ring has a surprising heft despite its petite 5 1/2 finger size. Estate price $1,100.00 CAD. Stock #e13471.
Princess cut diamonds were the most popular shape for engagement rings around 15 years ago. Today it’s oval shaped diamonds that are our most often requested. When it comes to channel set anniversary rings like this, princess cut diamonds have always made the most sense. When tightly set, side by side in a low channel they offer an uninterrupted display of sparkle and brilliance.
Round stones in this sort of setting look good too, but will always shown some empty areas of dead space. Princess cut diamonds are cut the same as a round diamond but with a square outline. They look a little smaller given their slightly deeper cutting proportions but offer a perfectly straight edge when expertly set in an anniversary style ring. The 10 princess cut diamonds in this ring each measure approximately 2.25mm x 2.25mm and weigh a combined 0.75 carats in total weight. They are very well matched of SI-I clarity and colour. This ring is constructed from 14 karat white gold in a finger size 6 1/2, weighing a sturdy 4 grams. The backside is open for easy cleaning with two connecting struts for added security.
We can only adjust the fit up or down about half a size. It was crafted in Canada by long time manufacturer Corona Jewellery in Toronto. The ring is in hardly worn condition and would fit without gaps with any flat edged engagement or wedding ring. It also looks great all by itself on the right hand. This ring is estate priced at $1,190.00 CAD. Stock #121-00043.
Great features and performance for a bargain price. They’ve been around for 140 years but unless you’re a serious watch aficionado you’ve likely never heard of Alpina. This Alpiner 4 model AL525NS5AQ6 in a current offering on the Alpina website for $1,895.00.
The watch features the same 25 jewel Sellita SW200-1 you’d find in any calibre 5 Tag Heuer, Baume & Mercier, Oris, Sinn, and many other well known Swiss brands. It also comes standard with a hard synthetic sapphire crystal, threaded crown/case-back, two way coin edge ratcheting timer bezel, luminous hands/markers, water resistant to 100 meters, fully stainless steel case, sunray blue dial, applied markers, and a beautifully finished case.
You could do a lot worse with the same money on a different watch. This one also comes with an extra Alpina signed textured 22mm blue rubber strap.
The watch has never been worn and remains in perfect condition.
It comes with the original documents, product/price tag, and the inner/outed boxes. Including our 1-year warranty the watch is estate priced at $1,070.00 CAD. Stock #501-00309.
It’s been 67 years since Rolex introduced one of the most popular and distinctive sports models of all time, the GMT-Master. In the 1940s and ’50s international travel was catching on and pilots required a quick easy way to keep track of local time and Greenwich meantime. GMT is a constant time that does not change with the seasons or location, it is the international reference point to which local all local time zones are calculated.
The simple rotating bezel can be rotated to show GMT using the second long red hour hand in a 24-hour format. The daylight hours are displayed in the red zone and dark nighttime hours are shown in blue. This model dates from 1978 and is in remarkable condition for its age. The dial shows absolutely no patina on the tritium hands or hour markers. The flat black, matt finish dial is perfect. We felt a watch of this quality and condition deserved a fresh factory service. In November 2020 we sent it to the Rolex Canada facility in Toronto for an estimate to service the watch and to address any other issues it may have.
To our relief Rolex only suggested overhauling the 26 jewel, calibre 1570 automatic mechanism, and replacing the plastic crystal.
The rest of the watch was left alone. We specifically requested that Rolex DO NOT polish or refinish the case or bracelet in any way. It has only been worn a handful of times since the factory service was completed at the end of January 2021. The previous owner removed the protective factory service stickers since these pictures were taken but the watch finish remains in excellent condition.
The Jubilee bracelet is a service replacement from 1997. Jubilee bracelets made their first appearance on a sports Rolex with the GMT. All the other sports models came only with the Oyster style making the GMT a little different.
After close to a 30-year absence Rolex is once again offering a GMT-Master with a red/blue bezel on a Jubilee bracelet, the new GMT is still the only sporty Rolex to be offered with a Jubilee bracelet. The GMT-Master was retired in the late 1990s and replaced with the GMT-Master II still in production today. The newest “Pepsi” red/blue model 126710BLRO retails for $14,400.00 CAD but apparently, the waiting list to buy one is a mile long, and used versions of the newest model have asking prices of over $25,000.00.
Of course, you can always get the entirely 18 karat white gold version for $59,000.00 CAD, but there are long waiting lists for that one too. Vintage GMT Masters have seen considerable appreciation in value over the past few years. If you’ve been chasing them for a while maybe it’s time to bite the bullet with this fantastic example. All four digit model number, plastic crystal professional Rolex watches are turning up less and less often. Collectors are buying everything that comes on the market and tucking them away. In the 1964 James Bond movie Goldfinger, the character Pussy Galore wore an early example of a Rolex GMT Master.
A 40mm watch in the ’60s was very unusual for a woman, but looking at it today I think they look fantastic on a feminine wrist, especially with a Jubilee bracelet like this one. This watch comes with the 2-year international Rolex service warranty, green faux suede service pouch, copy of service invoice for $1,412.50, service warranty card, booklet, and a Rolex polishing cloth. This beautiful example of a vintage GMT-Master is estate priced at $28,000.00 CAD. Stock number 505-00034.
Viewing by appointment only.
Art Deco doesn’t get any better than this. The classic details of Art Deco design are clearly visible in this bracelet. Bold contrasting colours, geometric balanced shapes are artfully combined resulting in one of the most popular eras in estate jewellery. We don’t get nearly as many pieces like this as we’d like to. It is very exciting when a significant example does turn up in our vintage jewellery department. This bracelet is constructed from 18 karat white gold and platinum.
Mixing 18 karat and platinum may seem like an unusual choice as both metals look similar but white gold was easier to work and was less expensive. The entire top of this bracelet is crafted from platinum while the bottom and hinges are hade made from white gold. The bracelet contains 38 old European cut diamond estimated to weigh approximately 4.00 carats in total and are of SI clarity with colour range HIJ.
There are 24 black onyx suppling the contrast in this beautiful piece of wearable art. The bracelet measures approximately 6 inches long and is secured by a plunger type clasp with side safety plus an additional safety chain.
Each of the links has been hand engraved with a delicate interlocking leaf vine pattern.
It is in excellent condition and appears completely original. The joints and hinged components show little to no wear. Despite the light airy look the bracelet weighs nicely over half of a troy ounce. This pretty piece of classic Art Deco jewellery is estate priced at $5,965.00 CAD. Stock #241-00066.
You don’t see high quality sapphires very often and when you do they are almost always set with diamonds to highlight the contrast. This bracelet forgoes the diamonds in favor of 3 edges of bead set natural brilliant cut royal blue sapphires. The high quality cobalt blue stones are faceted in a similar pattern to a full cut diamond, so they display brilliance unlike most.
This bracelet was crafted from premium quality, solid 18 karat white gold and a good amount of it. The bracelet weighs a substantial 21.2 grams and measures 18.3cm (7 1/4 inches), so it should fit most women’s wrists. The plunger style clasp is both easy to close by yourself and secure. It was manufactured by Zancan Jewellery from Italy.
We are not familiar with this brand. They are still in operation and offer elaborate jewellery creations in sterling silver to high end 18 karat gold like our estate bracelet. The cost to reproduce something like this with todays gold price would be in the $5,000.00 neighborhood. The 36 natural sapphires are estimated to weigh a combined 1.50 carats.
The bracelet shows very little wear. The rhodium plating over the white gold has worn off over much of the white gold revealing a slightly warmer hue. It would be a simple process to restore the chromy white look with a fresh plating of rhodium. This high end luxury Italian bracelet is estate priced at $3,150.00 CAD. Stock #241-00067. 
SOLD
I’ve been baffled ever since I saw my first Turn O Graph; why isn’t this model more popular? In fact it’s never been a top seller since its 1953 introduction. There are a few who appreciate the added functionality of the two way timer bezel, but most who have purchased a Datejust opt for the simple fixed bezel varieties. I’m sure even Rolex can’t figure out why it hasn’t been more successful. They persisted with the model updating it for over 5 decades until it was recently retired a number years ago. Although not the most profitable watch from Rolex it is notable for a number of reasons. It was the first watch to introduce the concept of the rotating timer bezel for measuring elapsed time, way back in 1953. It is considered the father of the wildly successful Submariner diver model. It was also the first professional pilot watch. In the 1950s it was used by pilots for navigational calculations. Later in the same decade it became the official watch of the US Air Force acrobatic Thunderbird display team. The Turn O Graph is also known in North America as the Thunderbird due to this association. TOGs don’t show up very often and latest example is the oldest one we’ve ever had. The inside case back and buckle have matching date code stamps indicating produced in the second half of 1961.
These early Thunderbirds like some of their regular Datejust cousins came with beautiful dauphine style hands and arrow shaped hour markers. These features along with the oxidized patina of the dial add to overwhelming vintage character of the watch.
The rotating bezel is made from premium quality 18 karat white gold and displays a slight yellow hue compared to the stainless steel case and bracelet. There are a few scratches and dings on the soft gold bezel but overall the fine coin edge finish is crisp and sharp.
The delicately machined bezel is a detail that really can not be refinished; the condition of this example speaks volumes of how the previous owner(s) looked after it. The rolled link Jubilee bracelet is also in very good condition, showing only minor lateral movement.
There is no question this looks like a vintage watch, but for a sporty Rolex well over 60 years of age it’s in remarkable condition. The 25 jewel calibre 1560 is functioning flawlessly inside the 36mm Oyster case.
It’s low frequency of 18000 beats per hour is clearly visible as power pulses through the second hand. A Rolex Submariner from this era could easily exceed $50,000.00. Thunderbird Turn O Graphs are more scarce yet sell for a fraction of the price. I still feel these are the most useful watches ever produced by Rolex yet they are often overlooked and have never really shared the spotlight despite how innovative they were. Although Rolex are no longer producing the Turn O Graph I think we haven’t seen the last of them. Rolex have been know to reinvent past models. Included with purchase is a Bill Le Boeuf Jewellers one year warranty. This classic is estate priced at $10,680.00 CAD. Stock #e13733.
There is a relatively new designation of “fancy” diamond called fancy white. These diamonds feature an even spread of microscopic crystal inclusions that create an opalescent fog within the stone. The diamonds take on a “white” body colour that let their natural brilliance and rainbow dispersion flash through, like the beam of a lighthouse. In order to be designated fancy white these diamonds need to display this effect evenly throughout their depths.
The 2.20 carat total weight set featured today exhibits that same effect but displays an intense champagne colour (that has unfortunately photographed like cognac!). Grading-wise these clouds equal an I3 clarity though they exhibit that same mesmerizing opalescence of their fancy counterparts. The pair are set into 14 karat white gold martini-style studs that span an eye-catching 6.55mm and 6.95mm diameter. Estate price, $3,150.00 CAD. Stock #151-00221.
Probably the largest hollow rope link we’ve ever had in our estate department, measuring an impressive 11.5mm wide. Despite its size, the chain is in surprisingly good shape, showing only the most minor signs of the life that it has lived. Manufactured using heavy gauge hollow square section tubing is not surprising when you consider it has been made from extra warm 18 karat yellow gold. Its 21.7 gram weight is a testament to its quality despite the hollow construction but what else do you expect from Italian chain! The 9 inch length makes that bracelet almost universal as we can shorten it as needed to fit any wrist. It’s a fun piece that makes a great sound as the links jostle about while being worn. Estate price $3,200.00 CAD. Stock #441-00097 e12428.
SOLD
Audemars Piguet, Vacheron & Constantin, and Patek Philippe are considered the holy trinity of luxury Swiss watches. Of the 3, Vacheron & Constantin’s mid-century models are an underappreciated rarity and bargain. Between 1940 and 1970 V&C produced less than 5,000 watches per year according to serial number sources. During this period, Vacheron & Constantin had a policy of producing no more than 24 examples of any reference with a specific dial, making this 35mm, 18 karat yellow gold model scarce to say the least.
In continuous production since 1755 has earned the esteemed brand from Geneva the honor of being one of the world’s oldest watch manufacturers. We have only seen a handful of VC watches pass through our estate department over the past 60-plus years. It is always a treat when one shows up once every other year or so. Our latest estate watch measures 34.7mm in diameter. This size is somewhat deceptive and wears larger than you’d expect. Pictured beside a 36mm Rolex Datejust, it appears the same or even slightly larger because it features a larger dial without a thick bezel.
The 18-karat yellow gold case is hallmarked with the image of Helvetia. Helvetia is the female personification of Switzerland in much the same way Lady Liberty represents the United States of America. The G part of the stamp signifies the city of Geneva.
The attention to detail and movement finish is an important Vacheron & Constantine tradition. The beautiful 17-jewel automatic winding calibre 477/1 is running great and keeping good time. This movement is hand finished with côtes de Genève and finely beveled plates. This was VC’s first self-winding movement and is housed in a water-resistant case equipped with a screw-on case back.
While not intended to directly compete with a pedestrian Rolex Datejust, it was VC’s do it all design of the 1950s. The bumper rotor provides a unique wearing experience as you can actually feel the rotor weight bounce off its 2 spring bumpers through wrist movement. The original champagne dial has turned a rich toffy colour over the years with an almost complete even patina. The gambler dial features hour markers shaped like card suits, clubs, and diamonds along with Arabic 12 and 6, all connected by a traditional printed minute track.
The sweeping centre seconds hand adds a touch of utility bringing the design away from a pure dress model. As per our usual practice, we’ve elected to leave the gold case in its original unpolished condition. There are scuffs, scratches, and dings on some of the exposed edges that are appropriate for a watch approaching 70 years of age. The large, fancy lugs are the most defining characteristic of this model and contribute to more wrist presence than you’d expect.
They’re far more substantial than what you’d usually see on a watch of this size. Their proportions appear less significant with grooved and stepped details. Their sculpted profile arcs low keeping the strap in contact with the wrist.
Attached to the watch is a new, 17mm Hirsch strap with a gold plated buckle. We will supply an additional strap of your choice at no charge if you’d like a different style or colour. Including a complimentary 1-year Bill Le Boeuf Jewellers warranty, this rare watch is estate priced at $8,160.00 CAD. Stock number 501-00136 e14658.

The 3 pointed star is a corporate logo that is easily recognized worldwide. The simple design has been symbol of Mercedes Benz since 1909 but it goes back quite a bit further. It was inspired by an 1872 postcard from the company founder to his family in which he identified their home with a three pointed star. The 3 points represents the companies intention for their engines to dominate the land, air, and sea environments. Mercedes Benz has seen success in marine and aircraft engines, it is their automobile production that they are most well know for.
This 14 karat yellow and white gold expression of the logo has been made to a standard worthy of the brand. Solid construction with a finished weight of 5.3 grams in upgraded 14 karat gold. The white gold background has been decorated with a reflective dimpled finish and 18 tiny single cut diamonds scattered throughout. Another 3 point star has been fashioned into a large hinged bail that can fit a chain of close to 6mm.
The pendant measures 21.5mm in diameter and is in excellent condition showing no wear on the bail or connecting ring. Estate priced at $720.00 CAD. Stock #161-00348.
.
From their 1868 inception in Schaffhausen Switzerland by American watchmaker Florentine Ariosto Jones, International Watch Company (IWC) developed a worldwide reputation for manufacturing watches of the highest quality.
As many of the world’s great watches do, the Portuguese model came about due to a customer request. It is believed that in the late 1930s, a Portuguese wholesaler approached IWC requesting a gentleman’s wristwatch with the precision of a pocket watch.
Challenges imposed by the Second World War made the production and delivery of civilian watches difficult. According to the IWC website, barely 250 “Portuguese” watches were delivered by 1945. It turns out that the introduction of the large for the 41mm time case size was far from commercially successful. In 1993 to commemorate the 125th anniversary of the IWC brand a small run called the Jubilee Portuguese was produced. The limited edition quickly sold out and a renewed interest in the classically styled model led to the reintroduction; the rest as they say is history.
To this day the Portuguese is the model that IWC is best known for. We don’t see many IWC watches at Bill Le Boeuf Jewellers and this one is one of the nicest we’ve been able to offer in our ever changing estate collection. The classic 41mm case size is perfect for today’s watch enthusiasts. Lacking a thick bezel, the silver/white dial looks even bigger than it is. A slightly domed crystal, relatively thin profile of 12.8mm, and supple crocodile strap help contribute to an easy to wear experience. Our example is in almost new condition. It has never been polished or refinished in any way.
The leather strap with a signed 18-karat rose gold buckle looks new and is completely blemish free.
The case back still sports its protective transparent sticker.
Curiously, the bottom outside lug corners have each suffered a small impact as evidenced by these two flat dents, The previous owner never noticed them and couldn’t explain how they got there.

They go unnoticed except under close scrutiny. The simple dial layout makes for simple time interpretation. The large dial gives the applied Arabic hour markers lots of room. The highly modified Valjous 7750 serves timekeeping duties. The calendar display has been eliminated along with the 12-hour chronograph register. IWC watchmakers even moved the continuous seconds hand to the 6 o’clock position to give the dial perfect symmetry and balance. The next owner will benefit from our 1-year complimentary warranty (prorated 5 years). This watch comes with an additional 20mm high quality generic crocodile strap with gold plated deployment buckle.
The original IWC box, cloth liner, instruction booklet, service booklet, never used polishing cloth, and plastic warranty card are all included in the estate price of $13,500.00 CAD. Stock #501-00241.


Forty years ago you walked into a jewellery store, saw a sparkly ring that appealed to you, and you bought it; simple. I suppose today that still happens from time to time, but our customers are interested in the quality, the pedigree, and most of all assurance they are receiving excellent value. The best way to determine value is to make sure the jewellery is described correctly and documented accurately. Accurate grading is the only way to comparison shop, and we welcome opportunity to demonstrate the excellent value of our estate diamonds and jewellery.
Our latest estate diamond ring has just been updated with our custom made platinum setting using two of the original tapered baguette diamonds. The original setting was decent but showed a little wear on the shank and somehow just didn’t showcase the centre diamond to it’s potential. After some consultation with an interested customer (thanks Nicola) we settled on this traditional platinum design. The freshly created ring is in keeping with the spirit of the original but is now ready for several generations of enjoyment. Here are a few before and after images showing the transformation.
The difference in colour between white gold and platinum is very apparent when viewed side by side. We sent the large centre diamond to The Gemological Institute of America for a full grading report in January 2024.
The full report can be seen online here. 1.19 carats in weight, SI1 clarity, I colour, fair cut, excellent polish, good symmetry, and strong blue fluorescence were GIA’s opinion of this diamond. While it was there we spent a little extra to have the report number laser etched in the diamonds girdle.
In case you lose the original laminated GIA report you can always look it up online and print off a copy. The cut is bright with lots of sparkle and brilliance, it could be brought up to excellent standards at the expense of around 10 to 12% loss in weight. That’s always the tradeoff when cutting natural diamonds; go for a perfect cut or try to retain some extra weight. If this diamond were to be recut, the diameter wouldn’t change, only the depth would be altered, so it really wouldn’t look any smaller in a setting.
The strong fluorescence is a unique characteristic that only some natural diamonds exhibit (lab-grown diamonds do not fluoresce like this). When exposed to invisible long wave ultraviolet light some natural diamonds glow an eerie chalky blue colour like this.
It’s a neat party trick that goes unnoticed until you’re getting your nails cured under UV light or you see the phenomena at glow in the dark bowling or somewhere like that. Set on the shoulders of the new custom platinum ring are two of the four original tapered baguettes. A pair of small round brilliant diamond are bead set after the baguettes and blend nicely into the low dome profile of the 2.2mm shank. The four high quality accent diamonds add an additional 0.20 carats of VS-GH sparkle. The 5.6 gram ring measures a finger size 8 and can be adjusted down as required. The classic design has an almost totally flat edge, making wedding ring selection very easy.
If you’d like a different style of ring or other piece of jewellery, this diamond can be purchased separately for $4,000.00.
The brand new never worn custom made setting without the centre diamond is also available separately for $1,250.00. The diamond or complete ring comes with the original January 2024 GIA report, and our traditional blue presentation box. This estate ring is estate priced at $5,250.00 CAD. Stock #101-00574.

Before everyone gets upset the dial has been refinished, the bezel insert and hands are likely service replacement items; look at what it is and what it offers. It’s a vintage 1965 Submariner 5513, one of the most sought after watches on the planet and it’s selling for about the same as a contemporary used Submariner.
This is a genuine rarity that you can actually wear every day and don’t need to be worried about hurting the value. The 26-jewel calibre 1520 lurking within the 40mm Oyster case is working great and keeping very good time. This workhorse movement is a favorite of watchmakers for its easy servicing and durability.
The very rare period correct 7206/80 Oyster bracelet still retains all of its 13 riveted links.
Naturally, after well over half a century, the bracelet is showing some wear and tear. It shows less sag and stretch than you’d expect.
A Submariner from the 60s with the correct riveted link bracelet is something you almost never encounter. The date code on the buckle is easily identified from early 1966.
If you’d like to preserve this rare bracelet we are including a high quality Rubber B nylon/rubber Cuff strap.
This never worn, $300.00 aftermarket strap was specifically made for older Rolex Submariners. Tough, waterproof, and very modern looking. It brings together vintage 1960s with a contemporary edge. The refinished dial has been done to a high standard. The only obvious telltale sign it’s not original is the silver text that should be white.
The font is a little thick compared to the original but it is still very attractive on the flat matte finish. For a Submariner of this era, the depth rating should read meters before feet not feet before meters. The luminous plots have been expertly applied to a high standard with just enough surface tension dome.
No, it’s not a museum piece and it’ll never win an originality contest but it looks great and comes with a somewhat affordable (at least for Rolex) vintage look that can only come with age.
We changed the plastic crystal with a genuine Rolex replacement; after installation, the watch passed our vacuum test for water resistance.
Plastic crystal Submariners hardly ever show up around here anymore. Almost every example that turns up in the market is immediately snapped up and squirreled away by collectors and is never seen again. Including a one-year Bill Le Boeuf Jewellers warranty, this vintage Submariner is estate priced at $16,000.00. Stock #505-00082.

A Patek Philippe is truly a rare treat for us to showcase. The brand is considered by most as the pinnacle of Swiss watchmaking tradition and quality. Since 1839 PP & Co. have been handcrafting luxury watches for royalty, heads of state, business leaders, and the world’s aristocracy. In well over 60 years of business, I’d estimate only a dozen or so have passed through our estate department. Many of Patek Philippe’s creations are extremely understated, and many models have been in production for decades. Wearing any Patek instantly confirms your good taste and appreciation of the finer things in life. We are proud to present this model Twenty-4, in 18 karat rose gold. The line was introduced in 1999 as their first collection exclusively designed for women.
The obvious Art-Deco inspiration has always been popular with those who admire classic geometric design and contrast. The company describes the Twenty-4 as “a stylish companion for the life of modern, active women, at any time of day or night.” Our model 4910/11 is a one-owner example that has been regularly worn by a long-time customer of Bill Le Boeuf Jewellers. We have elected to leave the watch in its current unpolished and original condition. The watch displays signs and evidence of life enjoyed, with scuffs and minor scratches on the case and bracelet.
It would be an easy job for our expert onsite goldsmiths to refinish the case to the original gleaming highly polished finish if you wish. We’ll always leave it up to you whether to leave watches original or restore the finish to like new. The Twenty-4 is still a current offering with a dial change to Arabic numerals and deletion of the diamond hour markers. The setting crown on the new model is simply adorned with the corporate logo, whereas our original design comes with a 0.05 carat diamond.
The current MSRP of the Twenty-4 4910/1201R-001 comes in at a cool $54,600.00 CAD plus sales tax.
Our watch comes with a no-charge jewellery bonus of a pair of Patek Philippe 18 karat gold diamond and sapphire earrings. These earrings contain 60 small round brilliant cut diamonds estimated to weigh 0.01 carat each.
The diamonds are contrasted by 12 bezel set blue sapphires on the edges. Needless to say, the diamonds and sapphires on these 16.3-gram earrings are of only the finest quality. If you’re looking for a pair of these earrings on the secondary market, expect to see asking prices well above $10,000.00. They come included for no extra charge with the purchase of the watch.
The watch is powered by Patek’s proprietary quartz movement, calibre E15. This 6 jewel mechanism is functioning flawlessly and keeping excellent time. A fresh Swiss battery was installed when this photo was taken.
It should come as no surprise that this watch is powered by an electronic movement. Patek Philippe were pioneers in quartz technology more than 60 years ago. Their precise mechanisms are finished to the same impeccable standards as the mechanical movements. The 25.5mm wide watch weighs in at a substantial 123.9 grams including the 6 adjustable sizing links.
Both the watch and earrings come with their original inner/outer boxes, and complete paperwork and original invoices.
The pillow and liner of the box’s finish are deteriorating and flaking off. One of the earring’s spring-loaded Omega backs is loose and should be tightened. The watch and earrings are being sold as a set only for the estate price of $31,000.00 CAD (tax included). We are happy to export duty-free to most international destinations. Stock #e14561.


Viewing by appointment only.

When this diamond ring arrived it needed 4 new claws, as they had worn thin over more than 20 years of continuous use. We figured before making the necessary repairs, we might as well add some extra value by sending the diamond to The Gemological Institute of America for a grading report. The diamond ring already came with a DC Taylor appraisal conservatively grading the diamond an SI2 clarity with an H colour.
I’m happy to say the diamond actually graded a slightly better SI1-H from the GIA. The complete October 15th, 2021 report can be seen online here.
Be extremely careful buying fancy-shaped diamonds. There are no universally accepted standards for cut, geometry, and proportions for fancy shapes. Thankfully this diamond is nicely cut. The table facet of 74% is a little larger than optimum, but it is still good, all the other proportions are quite nice. The girdle edge is a pleasant medium to thick, many poorly manufactured princess cut diamonds have very thick to extremely thick girdles that add nothing but extra weight. Far too many princess cut diamonds are cut waaaaaay too deep. This example has a depth of 72.7% which is appropriate for a square/rectangular princess cut. The overall dimensions of 5.88mm x 5.32mm are much larger than many 1.00 carat princess cuts.
There are 1.00 carat princess cuts out there that measure as small as 5.0mm x 5.0mm. Make sure the jeweller you are considering buying a fancy shape diamond from can explain how the cut affects the price and sparkle of a diamond. This bright and brilliant diamond is set in a simple 4 prong solitaire with a flat shank. The premium quality 18 karat white gold setting weighs in at a substantial 5.7 grams in a finger petite size 4 1/4.
Fortunately, the high-quality, solidly constructed ring can be made up to 3 sizes larger if needed Our onsite goldsmiths can accomplish this task in only a few days. If you like this diamond but would prefer a different setting, bring us your ideas. We’d love to create a custom one of a kind piece of jewelley for you. The complete ring with 4 newly repaired claws (not completed yet) is estate priced at only $4,690.00. The diamond alone is priced at $4,060.00 CAD. Stock #e14471.
This premium quality engagement/wedding ring set was crafted in Canada by award winning designer Noam Carver in Montreal. Bill Le Boeuf Jewellers is proud to be the exclusive agent for Noam Carver in the area. We sold this set to a long time customer of ours in 2018.
She recently decided to reset her diamond into a yellow gold setting for a new look. We accepted the original set (model B022) on trade toward a new yellow gold set.
Our large 2.10 carat estate old European cut estate diamond was looking for a home and just so happened to perfectly fit the Noam Caver original ring settings.
A full description of this 150 year old diamond can be seen on our website here. These 18 karat white gold rings are still available from Noam Carver and come with a retail price of close to $7,000.00 CAD. They are in excellent condition, the only wear they are showing is the super white rhodium finish has mostly worn away.
A fresh rhodium plating can easily be restored but we are waiting until the new owner confirms the size 6 set fits perfectly. Rhodium plating is this finishing touch for most white gold rings and is only done after alterations and adjustments have been completed. The rings contain 45 French set small round brilliant cut diamonds all secured using 4 tiny beads per stone for added security (no shared claws here). Each ring is individually serial numbered and comes with its lifetime warranty certificate.
The 1.7mm wide rings fit together with puzzle piece accuracy thanks to the contoured wedding ring edge.
They weigh 5.3 grams in a finger size 6 and can be adjusted up or down a little. You can buy the 2 ring set complete with the antique centre diamond for $10,075.00. If you have your own diamond we’d be happy to secure it into the rings for $3,075.00 CAD. Stock #141-00034 (2 piece set) and 191-00183 (2.10ct. diamond). Comes with the original inner/outer Noam Carver presentation box.

Why settle, you can have the best without breaking the bank. Platinum prices have been coming down for a number of years now. While still more expensive then white gold, platinum is now a compelling alternative. It’s whiter, tougher, more resistant to chemicals and it’s far less likely to cause irritation to those with sensitive skin. It is also more dense than even pure gold and it’s exponentially more rare. Here’s a ready to go set for way under $1000.00. The traditional solitaire design contains one round brilliant cut diamond estimated to weigh 0.20 carat of I1-K quality. Curiously the original manufacturer set the diamond in a four prong white gold setting while the rest of both rings are made from platinum. If you look closely you’ll notice the four prong top has a subtle yellow hue compared to the pure white colour of the platinum. The 2 rings measure a finger size 7 and weigh a combined 6.1 grams. The traditional design allows adjustment up or down to any possible finger size. The price of just an empty platinum setting can easily exceed our estate price for this 2 ring set of only $700.00 CAD. Stock #e11514.
The image of Britannia has been around for over 2000 years. She is somewhat the equivalent to the United State of America’s Lady Liberty. Both are beautiful images of strength and pride. These are arguably one of the prettiest bullion items available. This is the first example I can remember coming through our estate department. We only have the one and she is offered for just 5% over the current spot price. There is no sales tax on fine bullion. First come first serve. Stock #912-00716.
SOLD
Retro is getting more popular every day and this retro styled Hamilton was a sellout success when reintroduced in 2011. Only 1971 pieces were made to commemorate the 40th anniversary of the original.
I bet if they released this as a regular production model Hamilton would have sold thousands more of this striking model. The original was a revolutionary as it was one of the first watches ever produced to feature automatic movement with a chronograph function.
If that wasn’t enough the original also featured a handy calendar function as does the re-edition. The new watch features a more contemporary 29 jewel movement (Hamilton calibre H31) with a power reserve 50% longer than the original at 60 hours. Aesthetically the reedition is quite true to the original. Van Rijk Jewellers Toronto sold this original version a while back.
The two-tone sunburst dial is a beautiful homage to the original. Raised sub-dials registers with concentric rings, applied luminous hour markers, beveled rehaut with tachymeter scale and minutes track. The dial looks like it came from a watch far more expensive.
This is a large heavy watch, including the leather strap and buckle it weighs in a 142 grams. It has a diameter of just over 44.5mm, and measures 14.6mm thick. A threaded crown and case back contribute to a water resistance rating of 100 meters.
The dark brown rally strap is almost at the end of its usable life. We will supply no charge Hirsch replacement for the next customer. A signed pushbutton deployment buckle is a nice touch and adds to the luxury feel of this rare watch.
The Pan-Europ H357160 is in very good condition and remains unpolished showcasing the fine beveled edge on the top edges of the case. The slightly domed sapphire crystal is in perfect condition without the slightest scuff or scratch. We are happy to provide the next owner with a complimentary 1-year warranty. All functions are working as designed and the watch is keeping very good time. Comes with empty warranty card, instructions, inner/outer box, and foam box liner. Estate priced at $2,700.00 CAD. Stock #501-00336.

You wouldn’t expect to purchase a beautiful handmade piece of jewellery like this at a department store but that’s exactly where it came from. It’s hard to exactly date a cameo like this as the style hardly changed for over 100 years. It was likely hand carved in Italy from natural shell and finished in North America. The upper case E in a diamond stamp on the back of the frame tells us this was sold by Eaton Canada.
Eaton’s was once Canada’s largest retailer. At one point the esteemed firm employed 70,000 and commanded 60% of all department store sales in Canada. They were a store that sold high quality products for excellent no haggle prices. You could buy everything from farm equipment to high end jewellery from their very successful mail order catalogue. You could even order small prefabricated houses from them; they would ship all the required components and plans right to your building site. Many of these homes are still standing 100 years later.
For more than a century Eaton’s defined the Canadian retail experience. Changing times and a changing economic environment led to the eventual bankruptcy of the iconic Canadian brand in 1999. Fond memories and the occasional consumer product are mostly all that’s left. As soon as we saw the crisp, sharp, capital E in a diamond shape trademark we knew we had a little piece of Canadiana. This is a big one, it measures over 2 inches in length.
As per Eaton’s usual high quality, this one was crafted from a generous amount of 10 karat gold. The total weight is over 20 grams; we estimate the cameo contributes only around 5 grams of that total. A Delicate milgrain border and twisted gold wire ribbon add some extra decoration to this antique.
A pretty lady’s profile is typical subject matter for cameos and this one doesn’t disappoint. The hand carved depiction various in thickness allowing shading and contrast. In some sections the shell has been carved to less than 1.5mm in thickness.
You can wear it as a brooch with the safety wire clasp or deploy the hidden foldaway bail and wear it as a pendant. For an iconic jewellery item, its hard to beat an antique Cameo. This Canadian example is in excellent condition and estate priced at $1,050.00 CAD. Stock #231-00315.
We bought this watch because the original dial was impeccable. There wasn’t a stain or scuff to be seen.
The hands and hour markers were also in like new condition despite being 60 years old. To top it all off the tritium hour markers are still 100% intact and have all developed a lovely matching tan patina all around.
We acquired it in none functioning condition and assumed a simple mechanical overhaul was all it needed to get up and running again. Opening the case back with our original #2 Rolex propeller wrench from 1950s revealed a perfect condition, unmolested Tudor 25 jewel 2461 movement (ETA base calibre).
It was bone dry but otherwise mechanically perfect. Not one of the assemble screws looked like they had even been turned. After a full overhaul from our master watchmaker the watch is running well with chronometer standards (plus 3 seconds per day) as per the Vibrograf report.
It also showed an impressive beat error of just 1.2 milliseconds. This watch is ready to go for many decades with the occasional service. The case back didn’t show a single etching of previous service before the one we left. Chances are this watch was used for 5-10 years then sat in a drawer for the next 50!
The most curious feature of this watch is the unusual engine turned bezel. Most examples of the model (7965) come with a simple smooth polished bezel.
Was this a rare option, or did someone exchange it from a different model?
We didn’t go down that rabbit hole but it is certainly an attractive detail and sets this apart from the crowd. Our October 2023 service comes with a 1-year warranty. A new 20mm lizard grain brown leather strap pairs well with the vintage character of this Oyster Prince. As an added bonus we are including this Oyster style aftermarket bracelet for anyone looking for a more casual look. This good quality stainless steel bracelet fits the 34mm case like it was designed for it.
It features solid link construction, fliplock buckle and a diver’s extension (we don’t recommend this 60 year old watch for swimming).
You get 2 classic Oyster looks in one. Estate priced at $2,000.00 CAD. Stock #505-00453.
Anyone ever heard of Spessartite before? I didn’t think so. This gem is a rare form of the quite common garnet. When most people think of garnet a dark slightly reddish-brown gem comes to mind. Typical good quality garnet is usually the colour of red wine. As with most gems, there are anomalous colours that sometimes occur. With garnet, the rare hues can literally be any colour of the spectrum except blue. Each of these oval faceted garnets weigh an average of 3.25 carats and each contain a nice quality 0.25 carat SI1-H square princess cut diamond. We’ve priced both of these custom made 3.4 gram 14 karat white gold pendants exactly the same. One stone is slightly bigger and one is slightly better quality. It’s going to be a difficult decision which one to pick. Common garnet can sell for around $50.00 per carat while some very rare exceptional green garnets can sell for ten times as much. Orange to slightly brownish orange Spessartite garnets like these sell for somewhere in between.
All garnets have a very high refractive index (the ratio of the velocity of light in a vacuum to its velocity in a specified medium). What this means to the casual observer is these things sparkle much more than almost any other coloured stone. As light slows down travelling through these stones it is bent and bounced back to your eye as visible colour and sparkle. There are very few gems that do this as well as garnets. Diamonds are one of the only gem minerals that have a higher refractive index than garnets, but good luck finding one in this colour and don’t even ask about the cost of such diamonds. You’ll not likely encounter another Spessartite again. I can only remember one other example that has passed through Bill Le Boeuf Jewellers before. We’re going to let you decide which one to buy and what style of chain best flatters the pendants. Each pendant excluding chain is estate priced at $1,610.00. Stock #e9612 and #e9611 231-00101.
1 sold.
There’s a watch for every wrist and a watch for every occasion. Sometimes a giant, over the top, bulky sport watch can look a little out of place. The Oris Artelier is anything but a bulky sport watch, it’s a dressy traditional automatic with a very sophisticated appearance.
It has a classic sort of look making it difficult to tell whether it’s brand new or a 60 year old vintage piece. Beautiful dark gray guilloche dial with simple applied stick hour markers, a sweeping second hand and a very calendar window at 6:00 o’clock distinguish it from the typical sport model. The heart of the watch is of course a fine quality Swiss made Selitta SW200-1 26 jewel automatic movement proudly displayed through the case back window.
The luxury touches continue with a brightly polished 40mm stainless steel case on a brushed and polished flexible link bracelet with concealed locking butterfly clasp.
The watch is in very good and 100% original condition looking hardly worn. Have a look a the elaborate guilloche pattern on the dial. In bright light the pattern really comes alive with a 3D appearance.
Oris often go to some extra effort to make their watches stand out from the crowd. They have a dedicated customer base who appreciate the features and subtle look they offer. Oris didn’t need to go to the extra work doing this but we’re glad they did. This model can still be seen on the Oris website where is show with a price of $2,000.00 USD. This watch comes complete with the original inner/outer boxes, instructions, warranty card and our 1-year warranty. It is estate priced at $1,100.00 CAD. Stock #501-00018.

We’ve never encountered a BIRKS hallmark that wasn’t all capital letters. Either they took a brief break from formality, or someone was taking liberties with the Birks brand.
Whether this vintage necklace/earring set is genuine Birks or not it has been very well made. The 17-inch long necklace features solidly constructed clusters of rose-cut brooding red garnets.
The clip-on earrings (dating from the era when it was improper to have one’s ears pierced) each feature an 11mm wide cluster of matching rose-cut garnets. The 10 karat yellow gold set weighs in at 7.8 grams and is estate priced at $700.00 CAD. Stock #231-00151.
An intricate and thoughtful design from our Barrie neighbour Michael Smiley Fine Jewellery! The entire set takes its cue from the 0.98 carat princess cut diamond center. The halo’s corners have been cut off and patterned with keystone accents to help draw the eye in.
Those cut off corners were set with diamonds and between them a diamond shaped gallery medallion with yet another diamond at its center.
The beveled theme continues onto the shoulders and the fitted wedding band. Each ring of the soldered together set has been accented with three diamonds per shoulder; those on the engagement ring are thoughtfully graduated. All told the ring is hand set with 38 petite round brilliant cuts of VS1-H quality to match the brilliant center. To keep with Michael’s demand for high quality the set is made from 7.2 grams of 18 karat white gold. They currently measure a finger size 4 3/4 with some room to adjust. $7,150.00 CAD. Stock #e13026.
Likely one of your first pieces of jewellery was a pair of earrings. There is also a good chance it has a simple hoop earring. Hoop earrings are our most popular style. Large, small, thin, or thick, you can’t go wrong with a pair of hoops. Our latest pair of estate earrings should prove popular with their bright cut texture adding an degree of sparkle compared to simple polished tubing. They measure a full 50mm in diameter (2-inches), they are secured by locking wires.
An added benefit of the bright cutting is, if you happen to dent one of these it likely won’t show up. They are in perfect condition and weigh a combined 3.7 grams in upgraded 14 karat yellow gold. They are estate priced at $405.00 CAD. 426-00292.
SOLD
It only makes sense that many of Switzerland’s exclusive watch brands also manufacture high end jewellery items. After all, if you have the craftsmen and women that are skilled in producing intricate watches made from stainless steel, titanium, and precious metals, making jewellery is a natural and easy thing to transition into. Like their watches, the jewellery they produce is of exceptional quality and priced to match. Our latest watch brand jewellery item is this Piaget Possession spinning ring containing a petite 0.02 carat Gypsy set diamond.
This ring is perfect for the person you loves to fidget. Remember the figdet spinner fad from a few years back? This ring works the in a similar manner; the centre section containing the diamond is not connected to the outside and inner area that is in contact with the finger, allowing it the spin freely. A clever design indeed but also one without any practical advantage other than an actively for restless fingers. The ring is made from premium quality 18 karat gold with a natural brilliant cut diamond of minimum VVS2-G quality. This is a subtle ring measuring 4.7mm wide and 1.9mm tall. It measures a finger size 7 1/2 and weighs in at 6.8 grams. This ring is still available on the Piaget website under the model number G34P8M00 where it shows a price of $3,050.00. Our one owner example is in original condition, it has never been polished or refinished and retains all its sharp edges, hallmarks, and makers marks.
It was purchased in March 2022 at the Yorkdale Shopping Centre Toronto.
It comes with its original bill of sale, certificate, travel pouch, and envelope. This Piaget ring is estate priced 40% less that the replacement value at $1,830.00 CAD. Stock #121-00270.

This retired one owner Cartier ring is a little beat up but it has a lot going for it. We can always tidy it up by polishing and refinishing it, but they’re only original once. We don’t see many Cartier jewellery items and when we do they seldom come with the original packaging and certificate. It was purchased in October 2018 at the Yorkdale Shopping Centre Cartier Boutique Toronto.
The Cartier Lanières line of jewellery and watches have been retired leaving the only source for the distinctive designs the secondary market. The design can be identified by its use of square and geometric shaped features looking somewhat Art Deco inspired.
Our Lanières ring is was crafted from 18 karat white gold in a finger size 7 1/2 (European 55). It measures 3.10mm wide, 2.25mm tall, and weights a substantial 6.7 grams. The debossed Cartier logo still retains its crisp sharp edges; this detail often gets softened and becomes obscured when repeatedly polished.
The serial number, and other Cartier stamps are also clearly visible inside the flat shank.
Although this ring can be adjusted in size, its perfect pattern will become distorted. Comes complete with original inner/outer boxes, certificate and envelope. Estate priced at $1,980.00 CAD. Stock #401-00297.
We’ll admit it, the market for natural diamonds is challenging right now but it’s far from dead. In the meantime, the race to the bottom for laboratory grown diamonds is getting ridiculous. We can sell you high quality (VVS2-F) 2.00 carat lab-diamonds for less than $500.00 USD; that’s only around 2% of what the natural equivalent costs.
At the same time, pricing for natural diamonds is definitely lower than a few years ago. We’re finding current wholesale prices for natural diamonds is quite firm with no discounts on well cut, desirable qualities, in decent sizes. That’s where our estate diamonds offer a compelling option. Most of our customers would prefer to buy natural diamonds as there is nothing special or remarkable about a mass produced lab-grown diamond. They are an interesting example of modern technology but leave us cold knowing they can easily be replaced of reproduced for pennies on the dollar. Our latest natural diamond ring is a classic 3 stone design made by Birks Canada.
The ring features a large round brilliant cut estimated to weigh 1.70 carts according to its 7.9mm diameter. Its high clarity grade of VS1 could be improved on if it was recut to an excellent grade. This would modestly improve its brilliance and dispersion by revising the geometry, but more importantly it would remove a tiny chip on an upper girdle facet.
Personally we wouldn’t spend the money recutting it because the chip can only be seen under magnification and doesn’t pose any durability risk. The colour of the centre diamond is conservatively estimated to be a K, displaying just a hint of warmth. The large centre stone is flanked by a pair of old European cut diamonds weighing an estimated 0.58 carats in total. They are of nice SI clarity with a fancy light brownish hue. The subtle colour goes almost unnoticed when 90% of the attention is on the large centre diamond.
The ring appears to be a Birks custom. To see shoulder diamonds set in crown settings while the centre is secured in a double gallery setting is an unusual combination. We speculate the two brown shoulder diamonds were once earring settings that someone reimagined for use in this ring.
The ring measures a finger size 6 with a flat edge 2.9mm wide shank. This type of style fits perfectly flush with any flat edge wedding or anniversary ring. It takes millions of years and just the right conditions for mother nature to create gem quality diamonds like this, not just a few weeks in some far away foreign factory. This natural miracle of nature diamond ring is estate priced at $8,000.00 CAD. Stock #101-00595.
Rolex Explorer IIs are only available in stainless steel with a white or black dial. That’s it, no options, no diamonds, no gold or two tone cases. There isn’t even a different bracelet option offered.
If you want a classic sport Rolex this may be the model for you. Measuring 40mm diameter makes for a comfortable size that can be worn by anyone.
Not too big and not to small. They have become just a little more collectable over the last few years since they were replaced with the new 42mm version. The classic glossy black dial is synonymous for a sporty Rolex and always looks great. This is a great example of a complete 16570.
Minor wear and tear on the case, bracelet, and bezel are appropriate for a watch made around the turn of the millennian. The “P” serial number engraved between the lugs dates this watch from 2000.
Around this time Rolex upgraded the bracelet with solid end links but kept the fully drilled lug holes.
This watch offers the tight fitting upgraded bracelet ends with the more vintage look of holes in the lugs. The 12 link Oyster 78790A bracelet shows very little sag.
Sold new on Ontario by an authorized agent, it comes with its inner/outer boxes, warranty card, booklets, calendar, hang tag, wallet, etc. Included with watch is a one year Bill Le Boeuf Jewellers warranty. Estate priced at $9,000.00 CAD. Stock #505-00542.
Fabric motifs have been a staple in jewellery for centuries, they are fun to carve and allow for interesting surfaces on the metal. The looping ribbon of this whimsical band has been accented with an open channel of round brilliant cut diamonds. The well-matched SI-HI diamonds equal 0.13 carats together and make a striking contrast to the high polished 14 karat white gold. The 3.5 gram ring currently measures a finger size 7 1/2 with a bit of room to adjust. The ring is in like-new condition retaining its original chromy rhodium finish, for the estate price of $420.00 CAD. Stock #121-00141.
At the height of their popularity, Universal Geneve watches were considered among the best. They shared market space with Switzerland’s finest brands in the showcases of the world’s most exclusive retailers. They were distributed in North America alongside Petek Philippe by Henri Stern as a more affordable option. In France, Hermes handled the distribution for a period and proudly displayed their name alongside Universal Geneve.
The 1970s and the advent of quartz technology marked a turning point for the Swiss watchmaking industry. Many great companies floundered attempting to reinvent themselves with lower-priced battery-operated quartz models striving to stay relevant in the new electronic world of watchmaking. From occupying the luxury, exclusive, niche market space to competing with Japanese brands like Seiko proved a disaster for many Swiss companies that had been around for over 100 years. By the time it was over, more than 50% of the people employed in the Swiss watch industry were unemployed.
Universal Geneve was one such brand that eventually succumb to the competition and eventually went out of business. Before their demise, they produced what have become some of the world’s most sought-after and collectible watches. Compax chronographs and Polerouter models are at the very top of list when it comes to desirable Universal Geneve.
When this 1960s Polerouter Sub was brought in, we knew it had to be part of our estate collection. This is our first ever Polerouter let alone the illusive and much sought after “Sub” divers model.
We feel it is completely original with the exception of possibly a replacement crystal. The 1950s ushered in a new interest in the undersea world and scuba diving adventures. An eager Swiss watch industry developed watertight models for an emerging middle/upper class clientele. Rolex had their Oyster case with screw down crown and external rotating timer bezel, while many other brands used the “Super-Compressor” case by Ervin Piquerez S.A. (EPSA). The unique and patent protected design used a rotating internal timer bezel controlled by a 2nd crown located at the 2:00 o’clock position.
This design relied on water pressure itself to keep moisture at bay. As underwater pressure increased at greater depths, the case back compressed the seal tighter and tighter against the body of the watch. Out of water the seal relaxed extending the life of the pliable O-ring gasket. Brands like BlancPain, IWC, Jaeger Le-Coultre, Longines, Zenith, and others used the proprietary case technology, but the Universal Geneve Sub is the arguably the most collectible. Our model 20369-1 is the last version of the first generation produced and can be identified by the signed Universal Geneve “U” shield logo crown that is taller than the cross hatched lower crown.
The Polerouter Sub is a good sized watch measuring 42mm diameter, it really shows its larger presence when compared to something like this 37.2mm Rolex Turn-O-Graph.
Our mark III first gen comes with the upgraded 28 jewell calibre 218-9 that is in excellent mechanical and aesthetic condition. The micro-rotor automatic winding movement has a very long for the time power reserve of close to two and a half days.
The finish of these movements is exceptional and has been compared to what you’d see on a Patek Philippe, Vacheron Constantin, or Audemars Piguet, with beautifully decorated plates that are beveled and treated to gold plated text and jewell bearing bezels.
Our master watchmaker just performed a full technical revision to this exotic mechanism in March of 2025. It is running exceptionally well as noted by the by the vibrograph report.
Although the watch is around 60 years old, we feel our recent service is perhaps the first ever as there were are no other service etchings scribed into the case back.
The screw heads are all in perfect condition, the delicate Geneve wave decoration is bright and crisp without stains or oxidation. The watch likely sat dormant in a drawn for decades before we acquired it. The Universal Geneve brand itself hasn’t seen any commercial action since its name and all intellectual property was sold off in 1989 to Stelux Holdings International Ltd.
Big news came out in late 2023 when Universal Geneve was acquired by Breitling Watch Company with plans to revive the important Swiss brand. Universal Geneve will be a perfect compliment for the Breitling focused line of professional sports watches. In November of 2024, Universal Geneve announced the creation of 3 unique Polerouter watches prior to the brand’s full relaunch sometime scheduled for sometime in 2026. The three unique Polerouter come on the 70th anniversary of the 1st Polerouter released in 1954. Of the three 1 off examples, only 1 will be made available to the public at the Phillips auction in May 2025. The two other have designated for archival retention by Universal Geneve and will not be made available for purchase anywhere. A great article this trio of Polerouters can be seen online Hodinkee. With this sort attention to Universal Geneve and the Polerouter model, the brand relaunch is sure to be a huge success. We expect to see renewed interest interest in this important brand and increased demand for hard to find vintage models. Perhaps we should hold on to this rare Polerouter to speculate on future value, but we’ve decided to allow a lucky collector first crack at it. Aside from our March 2025 internal service the watch remains how we received it.
The 42mm stainless steel case has been left completely original and unpolished. Many times the lightly engraved model and serial numbers found on the case back become naturally polished away from use. We’re happy to report the identifying numbers are completely legible on this example.
The watch also comes with the impossible rare Gay Frères expansion bracelet that is in remarkable condition showing zero sag with every spring being tight and intact.
Gay Frères produced watch bracelets for watch manufactures such and Rolex, Vacheron, Patek, Heuer, Audemars, Piaget and others. By the mid 1970 Gay Frères employed over 500 specialist craftsmen.
In the late 1990s Gay Frères was gobbled up by Rolex in an effort to become more vertically integrated.
This stretchy 5 segment per link stainless steel bracelet in secured by a fold over singed buckle.
This buckle/bracelet combination is near impossible to find today and adds a large value component to the Polrouter 20369-1. We are happy to provide the new owner of this rare watch a 1 year warranty. This watch is estate priced at $15,000.00 CAD.
If the price of gold keeps climbing, we may be better off recycling this bracelet simply for the gold content, but that would be a shame. It may be hollow but it still contains a good quantity of valuable precious metal. At 18 karat it contains 75% pure gold by weight plus some fine silver alloy. At todays gold price of $4,500.00 CAD (March 31, 2025), this bracelet contains 10.2 grams of pure gold that is worth $1,475.00 CAD. As luxury piece of jewellery the classic curb link design never goes out of style. The chunky looking links show no wear in the joints, but do display a few minor dings.
It may be hollow but its still very durable. The high gold content 18 karat alloy resists oxidation and chemical corrosion that would harm lower quality 10 or 14 karat gold. The bracelet measures 9mm wide and a little over 8 inches in total length.
It’s impossible to buy new 18 karat gold jewellery for anywhere near $100.00 per gram these days, but occasionally we can offer some lovely estate items for not much over only the gold value. This bracelet is estate priced at just $1,875.00 CAD. Stock #441-00325.
SOLD
In over 60 of business, we had very few opportunities to offer a Vacheron Constantin through our estate department. VC is one of the most respected of all the high-end luxury Swiss brands, with a history going back to the mid-1700s. They are considered one of the holy trinity among Swiss brands along with Audemars Piquet and Patek Philippe. These three brands occupy the ultra-high-end space when it comes to luxury Swiss watch manufacturers.
This timeless design is from the Malte Grande Classique collection model 81000/000G-9107 and had a retail price of over $14000.00 USD close to 20 years ago. The solid 18 karat white gold case measures 36mm in diameter and features a beautiful hand-wind chronometer grade movement visible through the clear case back.
An engraved silver guilloche dial displays only the necessary information to tell the time. The watch comes with an endorsed warranty card from Royal De Versailles dated October 2003.
The original dark brown crocodile strap is in fair condition, showing significant wear, and comes with a signed 18 karat white gold buckle.
The white gold case displays signs of use in the form of scratches and scuffs but remains in good to very good condition. Comes with endorsed paperwork from Royal de Versailles (October 2003), and a signed leather travel pouch. Included with the purchase is a complimentary 1-year warranty. Estate priced at $15,000.00 CAD. Stock #e6056 501-00147.
Finding a dressy watch that’s truly tough enough to stand up to pretty much anything, yet formal enough to wear at a sophisticated black tie event isn’t as easy as it may seem. You could always go for a Rolex Oyster 36 if the $8,000.00 price isn’t a problem and you’re fortunate enough to see one at your Rolex agent. As timeless as the Rolex is it lacks some handy features and details of the Tag Heuer. A basic Rolex Oyster doesn’t have a calendar, diamonds, mother of pearl dial or timer bezel. The diamonds are petite but of excellent VS-G or better quality. They are prong set in square settings that double as very functional hour markers.
The Tag Heuer Link WJ1114-0 has excellent sporting features in this pre-owned example for $1,695.00. It’s water resistant to 200 meters thanks to an incredibly durable sapphire crystal, threaded crown and threaded case back. The watch is constructed entirely from high grade 316L stainless steel.
The Swiss made movement is functioning with typical quartz accuracy of plus or minus a few seconds per month. Mother of pearl dials are flattering with any outfit as their subtle rainbow of iridescent colours roll across the face.
Diamond hour markers add just a touch of bling without being over the top. The 39mm case is easy to wear for any gentleman or the lady who likes a larger watch without being too bulky. The iconic “S” shaped flexible link bracelet is tight showing no stretch or sag. It is secured by a fold over clasp with safety lock.
It has been worn responsibly by a regular customer/collector of ours. It shows light scuffs, scratches, and minor dings from use. A light polish/refinishing tidied things up without disturbing too much of the original detail. Including a one year complimentary warranty and our presentation box, the watch is priced at $1,695.00 CAD. Tock #520-00127.


We just don’t have enough hours in the day to properly post some of our watches. We thought we’d give you a sneak peek at a few interesting watches that are available now. As always we have more watches and jewellery in stock that hasn’t or will not make it to our website.
1996 36mm Rolex Datejust 16220. Complete documentation, packaging, and a very interesting patina on the silver dial that has shifted the colour to a very pale olive/champagne hue. Very cool. $7,300.00 CAD. 505-00334
1998 40mm Rolex Submariner 14060. No box or papers, but with the sought-after “SWISS only” 1-year dial. Always a collectible model. $11,000.00 CAD. 505-00335 SOLD
2006 41mm Omega Seamaster 300 2531.80.00. The “James Bond” watch. Nice condition with a pristine box and most of the original documents, recent factory service. $3,680.00 CAD. 510-00102 SOLD
39mm Tag-Heuer Link. Classic Tag for someone just getting into the hobby. You can’t go wrong with this low-maintenance quartz. No box or documents but in excellent condition. $1,000.00 CAD. 520-00087 SOLD














Synthetic moissanite has occasionally been used as a diamond substitute for a couple of years now. We come across this unusual mineral once in a while but this is the first time we’ve seen it in a gents ring. For those of you who aren’t up on the trend, moissanite is a man made gem that was introduced in 1998. It’s actually a decent alternative to a diamond being the next hardest gemstone on the MOHS hardness scale, with similar optical properties. It actually displays slightly more dispersion than a diamond and tends to be a warmer colour; sitting somewhere around a K on the GIA diamond colour grading scale. This slight mild tint actually makes it a more convincing diamond substitute when compared to completely colourless cubic zirconia. Measuring 7.5mm in diameter the stone has been calculated to weigh approximately 1.35 carat. It’s an impressive looking centrepiece, bezel set into a unique 20.1 gram, 14 karat white and yellow gold men’s ring. The extremely well made ring is one of the more modern looking and striking gents ring we’ve had come through our estate department. The ring is brightly polished and measures a finger size 11 1/2 with some room to go up or down. Estate priced at $1,950.00 CAD. Stock #206-00250 e9949.
SOLD
You don’t need to spend a lot of money to get into the watch hobby. A watch like this 1991 Tag Heuer 2000 Professional is a perfect way to figure out if a luxury watch is right for you. The 2000 series came out in the early 80s before Techniques d’Avant-Grade (TAG) had even merged with Heuer Watches. Since it was introduced, the 2000 Professional series has been a corner stone model and is still in production today, known as the AquaRacer. Our 2000 model 962.206F-2 dates from 1991 and is in good condition for its age.
The textured silver dial is very nice showing no discolouration or moisture staining, and the green/red logo is crisp and sharp. Luminous tritium hour markers and hands no longer glow due to their age, showing even even patina and match very well. The hour hand is missing some of the original luminous material but that goes almost unnoticed as the colour is close the same hue as the dial.
The threaded crown locks nicely down with over 2 full turns. We weren’t expecting much when we subjected the watch to an internal pressure test for water resistance, but to our surprise this 33 year old watch easily passed showing no signs of leaking.
The adjustable 24 link stainless steel bracelet will accommodate a wrist size just short of 8 inches. It display moderate sag but little joint wear between the links.
Its one way ratcheting timer bezel works great with 60 strong index clicks per 360 degree rotation. A flip lock buckle with diver extension tucks nicely under the clasp when not in use.
At 37mm diameter, only 8.3mm thick, weighing under 100 grams, this watch is super comfortable and can be worn by either a man or a woman. We believe the sandblasted finish is completely original to the watch and it hasn’t been polished on touched up. It displays evidence of use in the form of scratches, scuffs, impact marks, on the case, bracelet, and buckle but generally faces up quite well. The lab-grown sapphire crystal is perfect, not even the slightest scuff detracts from its excellent optical properties. Powering the watch is a Swiss made precision quartz movement that is working flawlessly and keeping better time than even the most highly adjusted automatic movement could.
It is nice to see the original calendar ring is with black numerals over a grey background is still here.
This watch does not come with any original packaging or documents. Including our 1-year complimentary warranty this retro Tag Heuer 2000 Professional is estate priced at $650.00 CAD. Stock #520-00121.
This 20mm long digit dominating ring certainly makes a statement with its vortex of swirling movement. The ring spirals around its central curving focal point, its bending crown of diamonds and sapphires. The siz round brilliant cut diamonds and 5 round faceted sapphires equal 0.30 carat together. The Canadian made ring itself is 6.3 grams of 14-karat yellow and white gold and currently measures a finger size 8 1/2 with room to adjust. Estate price is $980.00 CAD. Stock #206-00272.
It’s been said time and time again, you can’t judge a book by its cover. The “I1” clarity grade may technically and accurately describe this diamond’s clarity but it doesn’t show what it looks like in reality. We’ve seen many diamonds that grade better on paper, SI2 or and even SI1, that are dull and lifeless do to clouds that have a negative impact on the transparency and brilliance. While the grade setting inclusion is of a decent size, the white colour, position withing the stone, alignment with neighboring facets and claw position, make it virtually disappear unless you look at it under magnification.
With the use of darkfield illumination combined with some serious magnification make it is easy to resolve.
Under regular viewing situations all you see is sparkle and dispersion from this large natural diamond. According to its diameter of 7.12mm and other dimensions we estimate it weighs 1.60 carats. The colour of the diamond is a strong white H, it exhibits no fluorescence, and a good cut. The popular round halo setting design features a ring of 20 round brilliant accent diamonds of VS-H quality.
The ring has been constructed to a high standard with a finished weight of 4.2 grams. I love how the culet (bottom point) is visible through the setting when viewed from the side. The sharp point is hovering just above the gallery, great skill was exercised when it was hand assembled.
The 3mm wide shank is completely solid and made to a finger size 6. The ring appears to be in unworn condition. The original bright white rhodium finish is still completely intact. One of our onsite goldsmiths can easily adjust the fit up or dome a size or two. When the time comes, this ring will fit with any flat edged wedding or anniversary ring. No need to have something custom made to fit flush. This like new ring is estate priced at $5,500.00 CAD. Stock #101-00608.
A matched pair of wedding bands custom made from the best ingredients possible; we should know, we made them! Each is 7mm wide by 1.75mm thick featuring a comfort fit interior for smooth wear despite the flat edged profile. Both feature a single 0.15 carat baguette cut diamond of high VS-G quality, buried just below the surface of the rings. The combination of calm step cut diamonds within high polished platinum creates a subtle impression that makes you look twice.
The platinum nature of the bands means that both will last for generations. One is currently a size 10 and weighs in at 14.9 grams, the other is size 11 1/2 and weighs 15.9 grams. The estate price for the brand new, never worn bands is $1,610.00 CAD and $1,750.00 CAD respectively. Stock numbers e13393 116-00001 and e13394.
Size 10 example has been sold.
Decent emeralds are far more rare than diamonds and finding a large one with a rich green colour and excellent transparency is next to impossible. The finest natural emeralds of this size can wholesale cost over $10,000.00 USD per carat! While this one isn’t a perfect 10, it does display excellent colour with reasonably good clarity and is nicely cut with dimensions of 9.0mm x 8.8mm. We’ve calculated it weighs approximately 2.62 carats.
It has been set in this 14 karat white gold pinwheel cluster design. The braided ribbon design features 36 round brilliant cut diamonds bead set in the six sections.
An additional 18 small diamonds accent the 2.1mm wide shoulders. The 54 diamonds are estimated to weigh 0.55 carats and are of very good VS-G quality. The ring doesn’t appear to have ever been sized before and remains in original condition. If you don’t have a size 7 finger, one of our onsite goldsmiths can adjust the fit from a 5 to a 9.
A square stone in a scalloped edge setting is not something often seen but the unusual combination works great. This ring is estate priced at $3,990.00 CAD. Stock #206-00561

We’ve showcased some incredible jewellery, watches, and diamonds on our website over the years, but this ring holds the title as this biggest ever. We don’t mean in price as this one is actually quite inexpensive (we’ll explain), but is sheer dimensions and weight. It’s cushion shaped outline measures 33.8mm x 28.1mm with a heavy dome profile shank of 8.0mm wide and 3.2mm tall.
It has a gross weight of over 1.5 troy ounces (48.8 grams), that’s the same a 11 Canadian quarters! Without doubt this was a ring someone had custom made to showcase the huge yellowish/brown quartz that was calculated to weigh approximately 34 carats. The quartz has been bezel set in this over top white gold ring that measures a finger size 10. Surrounding the massive stone, around the shoulders and sides are 240 round brilliant cut diamonds.
The natural diamonds have been expertly set with perfect geometric precision. It’s one thing to drill and set half a dozen stones or so, but try doing it 240 times with this sort of accuracy. Hats off to the master goldsmith who created this one, their identity will remain a mystery as ring ring contains no maker’s trademark. All of the diamonds are nicely matched of VS to SI clarity with an average colour of HI.
Here’s why we feel this ring is super inexpensive despite the $10,000.00 price. If we calculate the total gem weight of around 42.40 carats, that leaves over 40 grams of 14 karat white gold. At todays gold price (March 10, 2025) of $4,185.00 CAD per ounce, the ring contains $3,160.00 in recyclable gold content only. Our wholesale diamond price guide show a wholesale cost of around $800.00 per carat USD for diamonds of this size (0.035 carat) and quality (VS-SI-HI). $800.00 USD per carat times 8.40 carats equals $6,720.00 USD in wholesale diamond value ($28.00 USD per diamond). The yellowish/brownish quartz is likely worth a few hundred dollars if you could fine something similar.
This flamboyant extravagant creation is in excellent condition and may be perfect for the extravert in you. Its size means it could be worn anyone, man or woman. It shows only minor wear on the surface of the quartz in the form if microscopic surface scratches and some abrasions on the facet junctions. It is offered for a price not only under its wholesale replacement value, but less than the wholesale cost of just the stones and gold value. The labor value to hand make something of this quality would be at least $2,000.00. This incredible ring is estate priced at $10,000.00 CAD. Stock #206-00557.
A significant weight men’s/lady’s rose gold bracelet is a rare thing to see in our estate jewellery displays. Our vintage and estate bracelets are almost always yellow gold and occasionally white gold. I don’t remember the last time we even have something like this is rose gold. The specific hue of this bracelet is very subtle, it doesn’t look coppery like some rose gold alloys. The bracelet is the popular Figaro style link measuring 6.7mm wide, with a length of just under 8 1/2 inches.
This length should fit the average man’s wrist and most women’s. Each link is 2.5mm thick and contributes to a substantial 19.6 grams in total weight. It is in excellent condition showing no wear between the links. It is estate priced at $2,150.00.00 CAD. Stock #441-00158.
SOLD
This style of ring has become very popular because you get the look of a 1.00 carat solitaire for the price of a 0.25 carat. A close look at the photo shows 4 small princess invisibly set without any metal prongs on any of the inside diamond edges. The 4 princess cut diamond are of very good quality for this type of ring SI-H and are very well matched. The 14 karat white gold setting weighs 4.0 grams and is in excellent condition. Estate priced at $700.00. Stock #e6583.
A collection of amethyst and diamond halos showcasing the range of purples that the gem is capable of. The matching oval earring and necklace set exhibits a rich royal purple in the earrings and a highly brilliant true purple in the pendant. The round amethyst in the ring is a lighter purple and the smallest of the group measuring 5mm in diameter.
The halo on the ring is a perfect circle of petite diamonds, while the halos on the earrings and pendant are a more open cluster, creating a scalloped edge. Together the diamonds in the earrings and pendant weigh approximately 0.42 carats.
The set is all 14 karat white gold with the necklace and earrings retaining their original chromy rhodium plating. The pendant is strung from an 18-inch chain and the ring measures a finger size 5 1/4 with some room to adjust.
Estate price for the earring and pendant set $910.00 CAD and for the ring $336.00 CAD. Stock numbers 436-00196 and 206-00350.
Ring has been sold.
In just the past 12 months the value of gold has increased 45%. As gold continues to appreciate in value it becomes more and more tempting to simply recycle some of our gold jewellery instead of selling it. We certainly do our fair share of gold recycling but usually only when our estate jewellery comes to us damaged or worn out. Jewellery and watches in excellent condition and of popular design aren’t normally considered candidates for scrapping/recycling, but these are not normal times.
Global geopolitical influences, have played havoc with commodity and currency valuations. Inflation pressures have focused the attention of many to gold and its ability to offset the effects of a weakening currency. ALL of our 18 karat estate rope chains are being sold for around 25% more than just the value of gold they contain, not to mention the extra value of fine silver alloy. Our price does include all the extra costs that go into producing a finished piece of jewellery such as the manufacturing costs, import duties, and wholesale/retail margins. At only 25% more than simply the recyclable gold value these chains are being sold for less than the wholesale replacement cost. Most of our premium quality 18 karat gold rope chains come from Italy, where the world’s finest chains are manufactured. We have more in stock than shown in these images, in lengths from under 16 inches to over 32, and in various widths. They are all priced at $130.00 per gram.
Lab-grown diamonds are the talk of the jewellery industry and they have been for several years now, but naturals are still a major part of our business. This is especially true when it comes to estate diamonds. A competitively priced estate diamond makes a very compelling case as an alternative to lab-grown, after all, a natural diamond still has value should you ever want to trade it in. Our latest natural diamond is this traditional round brilliant cut weighing 0.60 carats. It is a SI2 clarity with just a few scattered inclusions. The colour is a very nice “I”. It has a good cut and exhibits no fluorescence. We could set this diamond into a ring on make it into a simple pendant. Chances are we have another estate diamond of similar quality we could make into a knockout pair of earrings for less than anything else you’d be able to find new. This diamond measures 5.34mm diameter x 3.30mm deep and is in perfect condition. Estate price at $800.00 CAD. Stock #191-00181.
Tudor has been Rolex’s effort at capturing the mid-range luxury watch market since 1952 when they launched the first Tudor Oyster Prince. Focusing on that mid-market price point has allowed them to be a little more adventurous and diverse in their offerings, with something like the popular Black Bay mirroring Rolex’s iconic sporty diver look and this Heritage Ranger taking on the has sport/utility watch segment.
Ranger model 79910 has an all-brushed finish with just a discreet polished edge on the bezel. A matte black dial with ultra legible luminous hands and markers that plot out only the essential time interpretation information, this watch doesn’t even come with a calendar display.
The 41mm diameter case is equipped with a scratch-resistant sapphire crystal, screw-on case back, and screw-down crown embossed with the old logo Tudor rose.
It’s powered by a Swiss-made Tudor Calibre 2824 (ETA 2824) that features a 38-hour power reserve. Tudor’s watchmakers upgrade the specification on the standard movement with better hairspring and a higher grade pallet fork. The mechanism is adjusted to within chronometer specifications without the official certification and extra cost associated. The Oyster case Ranger is water-resistant to 150 meters and was based on a design from the late 60s. Tudor offered the Heritage Ranger 79910 with four different factory-issued straps, two of which accompany this watch: the leather strap with folding steel buckle and flip-lock, plus the NATO-style, one-piece camouflage fabric strap with its own steel buckle (never been installed on the watch).
This watch appears to be in unworn condition. There isn’t even the slightest scuff, scratch, or blemish on the case, buckle or strap. There are still some protective plastic stickers on the buckle and case back.
It is accompanied by an inner/outer box, endorsed Canadian authorized agent warranty card (January 2015), documents, hangtag, paperwork, foam box liner, and even the original protective white cardboard box sleeve. Included with the purchase is a complimentary 1-year Bill Le Boeuf Jewellers warranty. Estate price $4,500.00 CAD. Stock #505-00191.
Here’s a real knuckle-duster for you; a digit-dominating 20.7mm long ring encrusted with 180 hand-set round brilliant cut diamonds that completely cover the top half of the ring. All have been perfectly matched for cut and SI1-KL quality.
The warm colour is imperceptible to the untrained eye thanks to the whitening effect of the warm 14-karat yellow gold that surrounds and secures the diamonds. The 18.6-gram ring is hollow across the top but features a sheet-style backplate instead of an open grill.
This allows for easier cleaning but also prevents skin irritation that can sometimes happen with an open grill. The statement ring currently measures a finger size 10 with some room to adjust. The estate price is $3,850.00 CAD. Stock #116-00063.
Miscellaneous estate/vintage pendants and charms come and go, often without any website exposure. We thought we could show you our current selection of gold crucifix and cross pendants. Most of these are of higher quality and construction compared to what you’d encounter today if you’re looking at brand new. Many are 14 and 18 karat gold.
Some are solid and others are hollow, but all are heavier and larger than what manufactures are doing today. These two are both 18 karat, multi-piece assemblies. The larger example (e14124) is actually a little lighter and less expensive than the smaller version. After being in business for well over 60 years we’ve learned that keeping a good selection of inventory in stock is always more successful than trying to order from a catalog. All of these pendants are in perfect, like-new condition and more than competitively priced. The showcased two are estate priced in 18 karat premium gold at $266.00 and $322.00 CAD. Stock #e14124 and e14125.
BOTH SOLD. Others are available.
The Rolex Datejust is the watch that made Rolex a household name. Still in production today, this is the single most popular model Rolex has ever created. Cosmetically speaking this model has changed little since it was introduced to mark Rolex’ 40 anniversary way back in 1945. 80 years later it’s still in style and still in demand by people from all walks of life by both men and women.
The watch transcends fashion styles that come go and is admired by every generation. If you are looking for a blue chip watch, there is no better than any Rolex Datejust. When this watch was new it likely only cost around $300.00 CAD. The name Datejust may seem a bit awkward, but it makes perfect sense given some thought. Most watches slowly mechanically turn over the date display starting around 10:00pm taking several hours to fully turn the disc to reveal the next ,nnnnnnday of the month. Rolex produced a quick turn mechanism advancing the date in the blink of an eye within a few minutes of exactly midnight. This seemingly simple process makes the date display absolutely true and “just”, hence the unusual moniker.
Modern Rolex production is estimated at around one million watches per year making a contemporary Datejust very common. This wasn’t always the case. It took Rolex 60 years to produce the first 1 million watches total production of all models. According to the 2,221,538 serial number and inside case back stamp, this example was produced some time during the 2nd quarter of 1969.
When some people see the made in U.S.A. bracelet, they think the watch (or at least the bracelet) is a fake. This is not the case. Rolex produced many of their bracelet is the U.S. to get around steep import tariffs applied to non American produced watches.
In the early the mid 20th century there were plenty of made in the U.S.A watch brands that benefitted from this protection. Today every one of those original brands are out of business despite the protectionist actions. Some of those old American watch brands have been revived, but only in name as foreign buyers bought up the rights for pennies on the dollar. Our latest Rolex Datejust 1601 features a 26 jewel self-winding movement calibre 1570 tuned to chronometer specifications for accuracy.
18 karat yellow gold hands and hour markers display the time on a uncommon “linen” texture pale champagne dial. The classic 18 karat yellow gold fluted bezel frames the dial and provides a function seal compressing the plastic crystal against a flange on the bezel. This pretty detail isn’t just an iconic styling detail, it keeps this watch water-resistant.
The rest of the watch is high grade stainless steel that wears up well to all of life’s day to day challenges. This watch is in good condition for a 56 year old example. It is running well, keeping very good time with all functions working as designed. It was serviced in late 2022 and has hardly been worn since. The Jubilee bracelet will accommodate a man’s (or woman’s) wrist size of close to 7 1/2 inches or less.
We are happy to provide the next owner a complimentary 1-year warranty. You can still find a 36mm Datejust with an 18 karat white gold bezel on the Rolex website for $12,050.00 CAD. Ours is estate price at $5,000.00 CAD. Stock #505-00554.
Here’s your chance to start or add to your bullion collection at a price that can’t be beat. Most bullion vendors are selling fine silver like this for much more than our price. Even if you’re buying 1000s of ounces at a time, the best price we’ve seen is closer to spot plus 7% from bullion dealers. These sealed bars are from the Sunshine mint in Nevada. They are one of the larger silver refiners and supply bullion to several sovereign mints around the world. These bars are available in 2 sheets of 20 x 1 ounce examples. They are factory sealed and show zero oxidation or discolouration. We are selling them as a set of forty only. We may have other bars and coins in stock if you’re looking for a smaller amount. Pure bullion like this is not subject to sales tax of any kind, as it is considered a financial transaction. At spot plus just 5%, we expect these bars to sell very quickly. First come first serve. Offered at just the intrinsic silver value plus 5%. For credit card payment please add 2% to cover the credit card fees. To see up to the minute silver pricing, historical silver and gold charts, check out BullionVault.com. As of writing this posting (June 24, 2025) silver is priced at $49.24 CAD per ounce, making the 40 ounces worth $2,068.08 including the 5% premium. Actual purchase price will be determined at the time of sale. Stock #912-00715.
SOLD
18 karat gold is considered the premium choice when it comes to a gold engagement ring. A few manufacturers are using proprietary white gold alloys containing palladium bumping the gold purity to close to 80% while producing a whiter colour than traditional white gold. This Spence Diamonds engagement ring is a great example of a high quality 19 karat white gold engagement ring. The ring was originally purchased in November of 2014 when the cost of gold was 40% less than today and the Canadian dollar was 20% more valuable compared to the U.S. dollar. The ring contains a beautiful square brilliant cut diamond (princess) surrounded by 68 small round brilliant cut diamonds bead set in a cushion shaped halo outline and down the shoulders. There are great design elements incorporated throughout the ring. Overlapping, split shank with milgrain highlights, wheat engraving along the shank edges and diamond set gallery are features that can be admired from every angle.
The ring comes complete with a copy of the original bill of sale ($5,422.00 plus sales tax), appraisal, diamond report, warranty brochure, document folder and even the business card of the Spence Diamonds branch manager. It measures a finger size 6 and is in excellent condition showing little use. Our price is just $2,925.00 CAD. Stock #e13327.
Cartier’s version of the super popular paperclip link is the Santos-Dumont link. Stylistically the same but, you know, it’s Cartier so it’s made from solid 1.8mm wide, 18 karat white gold knife edge wire stock, with a width of 5.9mm.
The brand also shows itself in the solidly riveted oversized lobster clasp (conveniently large enough to proudly display its logo).
The hefty 20.9-gram bracelet measures 8 inches long (20cm). Cartier currently show a lighter 1.4mm version in white gold on their website priced at $5,700.00. Our estate price is $3,420.00 CAD. Stock #441-00195.
As the late comedian, Mitch Hedberg put it, in one of his deadpan nonsequiturs, “rice is great when you’re hungry and want 2000 of something”. This rice link bracelet and necklace set is about 1740 short of that goal. It more than makes up for the deficit consisting, as it does, of 46.9 grams of 18 karat yellow gold. The puffy rice grains and organized by threes and hinged to their neighbors on either side, allowing for controlled movement to ensure they sit flat during wear.
They span 8.6mm with the necklace measuring 16 1/4 inches and the bracelet measuring 7 3/4 inches. Each features a hidden box catch with springy white gold tongues and added safety locks. Heavy gauge hollow construction and in perfect condition. Estate price for the set only $6,097.00 CAD. Stock #431-00206 e14022.
SOLD
If you can’t find what you’re looking for, custom made is your only option. This ring is definitely a one off custom. You just don’t see rings like this made in mass production. Even seeing a basic single row diamond eternity ring isn’t something every jewellery stocks, because they are difficult to impossible to adjust in size. This one checks off way more boxes than just a simple eternity ring. It is measures 9.3mm wide, made from premium 18 karat yellow gold, has one row of channel set natural princess cut rubies, two rows of bead set round brilliant cut diamonds, and made heavy enough to adjust up in size by boring out the inside without interrupting the stones. The 24 square rubies each measure 3mm x 3mm and are estimated to weigh 3.50 carat in total.
They are very well matched and set so close together they look like a continuous ribbon of red circling the ring. They are framed on each side with 30 bead set natural diamonds (60 in total) contributing an additional 1.50 carats of gem sparkle. The diamonds have each been hand set in shared bead style using a minimum of claws exposing maximum sparkle from the high quality SI1-H natural diamonds. You know you’re wearing this ring, the width, theweight, and smooth finish feel great on the finger. Rubies make an excellent choice to use in an eternity ring style as they are second only in hardness to diamond.
This ring appears to have been only occasionally worn, showing little to no wear. Only one of the rubies displays a small chip that likely occurred when the ring was stamped with the 18K purity mark as it is almost directly over the impression. The small blemish is only visible under magnification. This well made ring would be difficult to reproduce and certainly couldn’t be replicated for our estate price of $4,000.00 CAD. Stock #206-00573.
Two’s company and three’s a crowd never applies to diamond jewellery. Using just 2 stones in almost any jewellery item makes for a very awkward arrangement in almost every design. Now add a 3rd stone and everything balances things out very nicely. This 3 stone creation of natural diamonds in quite substantial in diamond and gold weight. Including the 20 inch box link necklace it weighs 6 grams. The diamonds weigh an estimated combined weight of 0.96 carat.
We tend to be conservative in our calculations, there is more than likely a full carat by scale. The diamonds are nicely matched of I1-J quality. Pendant and chain are in like new condition showing no wear and tear, the original bright rhodium plating is still fully intact on the both sections. Estate priced at $1,925.00 CAD. Stock #161-00273.
Buying/selling new and pre-owned jewellery for over 65 years has allowed us great insight into the jewellery market compared to most jewellers who simple buy from a manufacturer, apply a markup and resell to the consumer. We’ve also provided accurate, fully documented appraisals that reflect the actual market, and not some inflated figure that isn’t realistic. We have unique experience that few others do. We subscribe to the world’s most accurate and extensive wholesale database of pricing information that continuously changes and is always evolving.
With this stunning 14 karat white gold, tanzanite and diamond bracelet, we are going to walk you through how our experienced gemologist comes up with a price. The starting point is the basic case setting in white gold that weighs approximately 30.8 grams if there were no stones in it. Something like this would be well bought at a wholesale level for around 1.5 times the value of gold it contains. The gold value alone is $1,700.00 CAD, so let’s say $2,550.00 (wholesale).
There are 142 round brilliant cut diamonds in this bracelet that we have conservatively calculated to weigh approximately 7.42 carats I1-IJ quality. From our wholesale database pricing info we see they cost around $375.00 USD per carat, so that works out to $3,750.00 CAD (after currency conversion). The 13 oval faceted Tanzanite gems are calculated to weight approximately 9.75 carats in total. We assessed the overall quality to be very good, lets say 7-8 out of 10 based on their saturation of colour, transparency, and quality of cut. Our March/April 2024 wholesale gem guide database suggests Tanzanite like this have a wholesale cost of 325.00 USD per carat. This results in a wholesale cost after currency conversion of $4,250.00 CAD.
Finally there is the cost involved to set each one of the 155 gems at least $5.00 per stone at wholesale trade rate, this works out to $775.00. If you add these 4 components together of the empty bracelet $2,550.00.00, loose diamonds $3,750.00, loose tanzanites $4,250.00, plus the labor to secure the gems $775.00, the total comes to total wholesale cost of $11,325.00 Canadian. If this bracelet was not made in North America it would also be subject to a 5% duty when imported.
The retail replacement value of something like this could be anywhere from an additional 25% to more than twice its wholesale cost. The key to getting great value for jewellery of knowing your jewellery or knowing your jeweller. As an excellent condition, like new, estate bracelet, we have it priced at only $10,430.00 CAD. Yes, this price is correct, we have a priced less than the wholesale cost to replace it. We’re happy to explain and show you the wholesale cost on any of our estate jewellery items, including loose diamonds. We are confident you won’t find better value anywhere. Bracelet stock #241-00065.
This piece centers around either the Tree of Life or a representation of Mother Earth; leaning towards the latter considering the female figure hidden in the trunk. She’s kneeling on an earthy reddish-brown crystal mass that twinkles brightly when moved.
Her eyes are bright green emeralds and her expansive branches are decorated with rubies, emeralds, sapphires, and diamonds. At the heart of the tree-top is a 1.50 carat round brilliant cut diamond of I1 clarity and fancy brown hue, mirroring the colour of the crystal mass.
What really catches the eye is the 5.50 carat oval tanzanite of the intense blueberry colour the gem is prized for. Judging from its position at the foot of this mythical tree I would wager it’s a representation of some important life-spring or pool.
The piece can be worn as a brooch or is accompanied by a 34 1/2 inch long 4.4mm wide King’s link chain that clasps onto two hidden rings.
The piece itself spans 2.51 inches long by 2.7 inches tall and is accompanied by a Harold Weinstein LTD. appraisal stating an estimated value of $25,000.00 CAD.
Our estate price for this one-of-a-kind handmade piece is $12,600.00 CAD. Stock #231-00181.


This is undoubtedly the most luxurious basket weave you’ll ever encounter! In place of grasses or lengths of willow, this bangle has been woven from diamond and 14 karat yellow gold. The rhodium enhanced diamond set strands are pave set, ensuring each section is tightly packed with brilliance.
The 208 hand set diamonds are of well-matched SI-I quality, equalling a perfect 1.00 carat estimated total weight. The yellow gold ribbons have been carefully crafted to mimic fabric, each displays its own unique pattern of hills and valleys in a soft satin finish with high polished ridges. The bangle spans 19.1mm wide at its top tapering to 5.5mm wide at its back.
It has been equipped with a button release box catch with two safety locks.
The interior of this hefty 38.1-gram bangle features a gold circular patterned screen. The ubiquitous intertwining linework looks like flowers one minute then morphs into a star within a circle.
Estate price $4,500.00 CAD. Stock #171-00023 e14108.
I’m not sure what the inspiration was or if there even was one when this ring was created by local designer goldsmith Michael Smiley. As per his usual format, this ring is very well made using very high quality components. The highly polished 14 karat yellow gold setting weighs 8.4 grams and contains 14 Gypsy set round brilliant cut diamonds along the zig-zag outline of the ring. The total diamond weight is approximately 0.20 carat and all are of VS-G quality. The ring measures a size 5 and could be sized up by our goldsmiths as required. Estate priced at $1,150.00. Stock #e7113.
Tag Heuer is best known for their large sporty divers watches and chronographs, often drawing on past designs from their 150 plus year history. When you think of Tag Heuer you likely don’t picture a watch that looks like this. It’s not a big, bulky, sporty divers watch. It’s the Carrera and its trimmed with solid 18 karat yellow gold. The original Carrera came out in the 60s and it has always been one of the brand’s more subtle models. This one dates from 2008 and showcases a less is more philosophy. The clean white textured dial displays only the essential information. The slightly domed sapphire crystal is scratch free with perfect optics. Quietly ticking away inside the water resistant case is an automatic Swiss made movement. The robust ETA derived 2824-2 (not the Sellita clone) mechanism is running great with all functions operating as designed. The 25 jewel movement is running well at a high beat frequency of 28,800 cycles per hour. This movement was selected and modified by Tag Heuer known as the Calibre 5 because of its reputation for being utterly reliable under adverse conditions. Versions of this movement can trace their origins to the mid 1950s. Even its contemporary configuration has been in use since the 1980s. A threaded display back showcases the movement for all to see.
Our master watchmaker performed a full servicing on the movement in March 2025. It should be good for 5 to 10 years before its next routine servicing. At 39mm diameter and 130 grams the watch is large but not overwhelming. It wears larger that the size suggests because it lacks a large bezel; it’s all dial. The solid 18 karat yellow gold bezel is in excellent condition showing only light surface scratches. The stainless steel and 18 karat gold capped links also display minor evidence of careful and occasional use.
We will happily refinish/polish the watch for you if you wish but remember, it can only be original once. This one owner watch comes complete with the endorsed warranty card from Colombian Emeralds, inner/outer boxes, instruction booklet and pouch. This is an uncommon more dressy looking Tag Heuer. It will appeal to the mature watch enthusiast looking for a classy looking, easy to read luxury watch with basic time and date display. This model seldom comes around for sale and even less often complete with box and paperwork. Included with purchase is a complimentary 1 year warranty. Estate priced at $2,750.00 CAD. Stock #520-00017 e12390.
If your taste is for the custom/contemporary look consider this unique solitaire. The rounded square shank is very comfortable to wear measuring an average size 6.5 containing one round brilliant cut diamond 4.48mm diameter weighing 0.33 carats of good quality SI2-G. The shoulders of the ring are connected by two diamond shaped rose gold castings each containing one small bead set round diamond. The ring weighs 4.3 grams and is still warm from a fresh refinishing. Estate priced at $1,085.00. Stock #e6585.
Mabe pearls, known for their distinctive half-spherical shape, have a rich history dating back to ancient times when they were treasured by cultures such as the Greeks and Romans. Our example is a 15mm silver-white with subtle blue and pink overtones, featuring delicate soft moon-like peaks and valleys spread across its surface.
The pearl is wrapped in a braided collar ending in a petite diamond-studded bow, with seven round single-cut diamonds, totaling 0.07 carats and boasting high VS-G quality.
The finger size of 6 1/2, with room to adjust, ensures both comfort and a personalized fit. The 14 karat yellow gold ring weighs 8.6 grams and is in like-new condition for the estate price of $882.00 CAD. Stock #206-00409.
SOLD
Step up your game with this pair of 14 karat gold cufflinks. The shirt and tie are not dead, it’s too bad the pandemic has changed the way some of us dress and present ourselves to the rest of the world. Occasions where more formal attire should be worn say a lot about the person and the respect they have for the situation and people around them.
This classic set was manufactured from upgraded 14 karat yellow gold and are designed in classic geometric rectangular form with a machine cut bright pattern and texture. They are in excellent condition and function with great security. I’d always rather be slightly overdressed than underdressed. This timeless pair of cufflinks are estate priced at just $800.00 CAD. Stock #446-00011.
SOLD
“You only get one first impression” and in the case of these link bracelets that impression is hefty. Their 15.2 and 14.4 gram weight are surprising in the hand as they look lighter than they weigh. Each 14 karat curb link bracelet measures 5.2mm wide and consist of a subtle cross between yellow and rose gold. One measures 8 inches long and the other 8 1/4 inches. Both are equipped with heavy spring ring catches with scale matched ring ends for easy fastening.
The make of the clasps and the colour of the metal seem to point to an older vintage. Meaning that these bracelets were most likely high quality charm bracelets back in the bygone days of traditional hang charms or perhaps they were once part of a sophisticated pocket watch chain. Estate price for each $960.00 CAD and $1,002.00 CAD. Stock numbers e13148 and e13149
We feature them a lot but solid rope chains are rare compared to their hollow counterparts, so we feature them every time we can! Measuring a narrow 2.7mm by 24 inches long the chain is ready for any wearer. The 21.8 grams of solid 18 karat yellow gold that makes up this chain is bolstered by its mega lobster clasp that is equally function and a feature to display.
The clasp measures 19.5mm long by 9.1mm and accompanied by extra-large jump ring ends.
The necklace is in like new condition showing zero wear on any of the connecting rings. Estate price $2,834.00 CAD. Stock #431-00728.
SOLD
Don’t let the 18 inch length deceive you, this statement necklace fits like a 16 or 17 inch length thanks to its oversized links. The massive rolo links each measure 11mm in diameter by 3.9mm wide and are of course hollow constructed.
Despite that the chain still weighs in at an impressive 30.2 grams of rich 14 karat yellow gold, as a testament of its high quality Italian manufacturing. The chain ends in a decorative C clasp that could really be worn at the front or side of the neck as a feature.
The chain does exhibit some minor dings on several links but they are only visible with careful up close inspection. Estate price $3,145.00 CAD. Stock #431-00676.
SOLD
Where do we begin describing a ring like this? It would take a post thousands of words long for us to adequately describe the attributes of this ring and the absolute value it represents. We’ll start with the facts. When it comes to our estate diamond rings and other jewellery, wholesale is the new retail at Bill Le Boeuf Jewellers. You’d think with all those inexpensive lab-grown synthetic diamonds flooding the market, natural diamonds would be seeing some pricing pressures. Such is not the case, in fact, the opposite is true; while lab-grown synthetics are falling in price every day, properly graded, natural diamonds have seen price increases over the last year. Did you know that synthetic diamonds have fallen in price to only around 10% of their natural counterparts? If you’re considering a synthetic, laboratory-grown diamond, make sure you are getting it at close to a 90% discount compared to the real thing. The diamond in this beautiful 18 karat white gold halo setting is 100% natural in every way. The only thing humans contributed to Mother Nature’s creation was the skill to transform the rough crystal into the excellent cut, finished round brilliant cut diamond.
What I love so much about this diamond is the 60/60 excellent cut (60% table and 60% depth). Almost no modern diamonds are cut like this anymore. Among accurately graded, excellent/ideal cut diamonds with reports from reliable labs, the average depth is more than 62% relative to the diameter. Two percent doesn’t sound like much, but it makes them appear noticeably smaller due to their compact diameter. Sorting through our 500,000 diamond database there are no stones of this quality anywhere near this price ($28,400.00 diamond without setting) with an average diameter of 8.45mm or larger. The other component of this 60/60 diamond is the 60% table percentage. This slightly larger table percentage contributes to the bigger look with a modest optical bias favoring brilliance over dispersion. A more brilliant diamond will display a touch more white/black flash, compared to a smaller table that shows more break up of white light into a rainbow of spectral colours known as dispersion. There is a little more to it than that, but rest assured this is a rare diamond with excellent cutting geometry compared to what is available in other excellent cut diamonds.
This type of geometry was more common in 1950s and 1960s. The full 2011 Gemological Institute of America report can be seen online here. Besides the flattering excellent cut, the rest of the diamond’s attributes are very nice without being exceptional, resulting in all around great value. Its VS2 clarity appears flawless to the naked eye, the H colour is virtually colourless without a noticeable tint, very good symmetry/polish and no fluorescence finish up this diamond’s quality characteristics.
The 18 karat white gold setting also makes this diamond appear larger than you’d expect for a stone weighing 2.20 carats. The ever popular “halo” design frames the centre with a string of tiny round brilliant cut diamonds, all expertly French set with a decorative beaded outline.
The diameter of the halo frame bumps the ring’s diameter to just shy of 12mm. The 6.1 gram premium white setting contains 130 full cut diamonds of minimum VS-H quality that bring the total diamond weight to an estimated 2.95 carats. The ring measures a slightly smaller size 5. Our onsite goldsmiths can adjust the ring up or down a full size or so. The setting alone represents outstanding value considering it is estate priced at just $1,600.00 (without the centre diamond). Decorated on three sides of both shoulders plus the vertical sides of the halo frame and even a surprise diamond under the setting. As a final touch to love and romance, the filigree gallery of the ring consists of 6 hearts that go almost unnoticed, lost in the ornate design.
The ring is in excellent condition, showing no worn areas. It comes with the original laminated GIA report from January 2011. The complete ring is estate priced at $30,000.00 CAD. Stock #101-00357.
Viewing by appointment only.
This amethyst bangle joins the ranks of our selection of coloured gemstone bangles and bracelets. The intense purple is a welcome colour in our rainbow that already includes deep red garnets, blue sapphires, red rubies, and fiery orange citrine.
To set them apart from the crowd the amethysts have been bracketed by bright cut, chromy rhodium finished settings with petite diamonds at their centres. The 10 karat yellow gold bangle is secured with a figure-eight lock.
Estate price $350.00 CAD. Stock #e14226 241-00004.
Heart padlock bracelets first became popular in the Victorian era. They were gifts between two lovers with the man keeping the key and the woman usually wearing the bracelet whenever they had to be separated. This notion certainly wouldn’t fly today which is probably why they are no longer made with accompanying keys. Now the padlocks simply act as decorative clasps and the symbolism has been lost to a passion for antique motifs (thank you Bridgerton and Downton Abbey). This 9-karat rose gold example is, in fact, British, marked with the assay mark of Birmingham and a date stamp for 1906.
The heart-shaped padlock hangs from a period-appropriate faceted Cuban link bracelet with each link individually carat stamped. The bracelet is heavy-gauge hollow constructed, in like-new condition, and weighs in at an impressive 21.3 grams as a testament to its high quality.
The 117-year-old bracelet is equipped with an additional safety chain for added peace of mind. The estate price for this bonafede antique is $1,470.00 CAD. Stock #441-00287.
SOLD
Tahitian pearls are not only the most valuable pearl, they also represent the greatest level of environmental care in an already environmentally conscious industry. The pinctada margaritifera mollusk can grow to ten pounds in its lifetime, and that lifetime usually covers about 20 years but some have been known to live to 50 years old. They are also very sensitive to changes in water temperature and pollution, making pearl farmers very vocal supporters of ocean cleanup efforts and climate change. If the oceans warm too much pearl mollusks would eventually die off and the pearl industry would collapse. The pinctada margaritifera takes 18 months to 2 years to grow a Tahitian pearl. They aren’t killed in the pearl harvesting process. Farmers need to maximize the yield of their mollusks. It wouldn’t make sense to kill one that has reached the larger size required to grow the most valuable pearls. Tahitian pearls come in a range of colours known in the trade as aubergine (dark grayish-purple bodycolor), pistachio (yellowish-green to greenish-yellow bodycolor), or peacock (dark green-gray to blue-gray body color with pink to purple overtones). Our 9.2mm round Tahitian is of the peacock variety.
It’s had a 14 karat white gold ring custom-built around it. Featuring 0.50 carats total weight of tapered baguette-cut diamond accents of high VS-GH quality. The ring measures a finger size 6 1/4 and is accompanied by its original appraisal stating a reasonable realistic value of $3,600.00 CAD. Our estate price $2,100.00 CAD. Stock #e13941.

Beyond being visually appealing the by-pass wedding set carries a symbolic representation of the wearer’s relationship. I don’t mean the obvious statement of being married. The style is meant to symbolize two lives lived mostly separately until by chance they meet and intertwine to carry something beautiful and special.
That important change is represented in this ring by a 0.40 carat round brilliant cut diamond. With an I1-H quality this diamond is not quite perfect but like most marriages the fiery diamond doesn’t need to be perfect to be beautiful. The 0.50 carats of channel set diamonds symbolically build in size as they move toward the center diamond and joint of the matching wedding band. Both rings are well made from bright white 14 karat gold, currently measure a finger size 6 with some room to adjust. They are being sold as a set only for the estate price of $1,400.00 CAD. Stock #e10964
Buying previously owned high quality jewellery can be great value. This beautiful 18 karat gold necklace is for sale at just 39% more than the value of only its gold content.
Too bad you can’t buy a good used car for 39% more than its metal content. Once your car is totally worn out it is only worth $250.00 to $300.00 per ton!!! “The trend is your friend”, gold continues to escalate in value almost every day. If we could only go back in time 20 years and load up on gold when it was trading at $500.00 per ounce; today (Feb. 22, 2025) it is selling for $4,176.00 per ounce. It’s hard to describe this style of chain and I certainly don’t know its name. It consists of yellow gold double wedge shaped links turned 90 degrees on each other connected with white gold circular rings measuring 4mm diameter.
The complicated necklace measures 23 inches long and is secured with a large circular lobster clasp with a swivel base allowing the clasp to spin and twist. We know nothing about the “dinor” label located a few links from the clasp.
We couldn’t find any information about this manufacturer online. The clasp is stamped 750 (metric equivalent to 18 karat) along with a MK logo, we tested various sections of the chain to confirm gold content and are confident of the premium 18 karat white and yellow gold construction.
This mysterious chain may not be truly unique but we have certainly never seen anything quite the same. It is suitable to be worn with a pendant or by itself. The long 23 inch length can easily be worn by a lady or man. It is estate price at $4,500.00 CAD. Stock #431-00836
It’s the whitest, most durable precious metal available. These qualities make it the perfect choice for setting diamonds. Platinum will last a few life times without the need for constant rhodium plating and the occasional re-tipping or re-channeling typical of white gold rings. This example is channel set with 7 small round and baguette cut diamonds all of very good VS-H quality weighing approximately 0.30 carats in total. The ring weighs 4.0 grams in a finger size 5. The flat edge channel set design fits many different rings and would make a great choice for a wedding or anniversary ring. Estate priced at $1,050.00 CAD. Stock #e8148.
The simple twisted bangle is taken to a luxurious height in this well thought out example. First, it’s been made from 11.8 grams of top quality 18 karat yellow gold, proof that despite its hollow nature it was still made well and sturdy. The joint ends have been capped in high polished white gold and the hinge is spring loaded to keep the bracelet in place even if the clasp opens. As if that weren’t enough it’s been equipped with a clasped safety chain for maximum peace of mind. The twist itself measures 5.75mm wide making it a piece that can stand alone or stand its own while being worn in a layered fashion. Estate price for the like new piece $1,800.00 CAD. Stock #e13527.
This puffy curb link measures 8.8mm wide by 3.8mm thick giving it a bold presence on any lady’s wrist. That bulk is achieved by hollow construction but the 14 karat yellow gold bracelet still weighs over half an ounce at 15.1 grams.
It is in like-new condition, showing no dents or dings as proof of its durability. The piece is slightly longer than average at 7 3/4 inches and is estate priced for $1,650.00 CAD. Stock #441-00095 e13484.
SOLD
Sapphires are prized for their brilliance and sparkle, which might surprise anyone used to seeing them in their deep blue variety. Find them in a lighter colour, like this sunny golden yellow pair, and you’ll see what they are capable of. In person they appear to fire from within, almost rivaling the well-cut diamond they bracket.
The pair weigh about 0.20 carats together while the diamond in their midst weighs 0.38 carat, of a nice SI2-H quality. In an engagement ring or promise ring they are especially potent as sapphire is a traditional symbol for loyalty and constancy. The ring that carries this shinning trio is well made from 14 karat white gold and currently measures a finger size 5 1/2 with some room to adjust. Estate price $1,260.00 CAD. Stock #206-00433.
It’s called a SuperOcean for good reason. It’s a “super” capable diver watch with everything the sport watch aficionado could be looking for. One of the most impressive things you’ll notice is the water resistant depth rating on the dial of 5000 feet; no wonder this watch is known as Orange Abyss.
That depth rating should be plenty for the typical recreational diver who is not likely to exceed any more than 100 feet. Overbuilt in almost every way the 42mm watch also is equipped with a helium escape valve. It’s another feature that 99.9% of divers will never need.
It is there just on the off chance you decide to do a really really deep dive that requires living in a diving bell breathing a mixture of helium and oxygen for an extended period of time. Pressurized helium gas can penetrate the case gaskets, build up inside the case and push the crystal out if the watch isn’t equipped with a helium escape valve. It does make for an interesting conversation point if someone asks what the little button on the side is for.
The rest of the watch is typical high end stuff. Certified chronometer grade automatic winding Swiss movement, super hard curved synthetic sapphire crystal with anti-reflective coating, threaded crown/case back, one way ratcheting timer bezel, thick highly luminous hands and hour markers.
These SuperOcean models are mostly seen with basic black dials. They were also available with red, yellow, and blue coloured chapter rings around the edge of the dial. Only the orange version like this one was produced as a limited edition run of just 2,000 pieces.
The overall condition as very good for a watch that was purchased new in 2013.
It remains in original condition and appears unpolished. The colour matched black and orange strap is in fair condition.
An accessory stainless steel bracelet is available from Breitling should you wish to change the look. The watch comes with every piece of original packaging, warranty card, certificates, instructions, booklets etc. Bill Le Boeuf Jewellers will supply a 1-year complimentary warranty for the next owner. Estate priced at $3,500.00 CAD. Stock #515-00091.
Mystic topaz is a captivating and vibrant gemstone that undergoes a unique enhancement process to achieve its distinctive appearance. Typically starting with a colorless or pale topaz, the gem is treated through a process called physical vapor deposition (PVD), where a thin layer of titanium is applied to the gem’s pavilion surface. This treatment results in an array of stunning, iridescent colors, including mesmerizing shades of green, purple, blue, and gold.
The play of colors gives mystic topaz its enchanting and ever-changing rainbow-like effect. Our 5.50 carat mystic topaz has been specially cut with concave facets to further enhance the splintery rainbow effect. The gem is framed by 56 petite round brilliant cut diamonds equaling 0.50 carats together of SI-IJ quality.
The ring itself is made from 14 karat white gold and currently measures a finger size 9 with some room to adjust. Estate price $1,400.00 CAD. Stock #206-00477.
Among jewellers and those in the diamond trade a diamond like this is known as a “Triple X”. The 3 Xs refer to the excellent cut, excellent polish, and excellent symmetry. At no point in this diamond’s transformation from the rough crystal, to the finished gem was any part of the production compromised or rushed. No doubt, the master cutter/polisher responsible for cutting this diamond could have opted for merely a good or very good cut with a heavier finished weight but they didn’t lower their high standards.
Very few diamonds stocked by most jewellers are manufactured to such high standards. Mother nature endowed this diamond with outstanding potential when it formed 3-4 billion years ago, in the form of exceptional clarity and colour. The Gemological Institute of America determined VVS2 clarity with an F colour.
As an added bonus the diamond also shows no fluorescence when exposed to long-wave ultraviolet light. The full GIA report can be seen online here.
Valuable and important diamonds should always come with a GIA report (there are no substitutes). If you’re considering any valuable diamond, insist it comes with a Gemological Institute of American Diamond Grading Report. GIA DO NOT provide appraisals and has no interest in the commerce of diamonds. They are an impartial 3rd party, interested only in research, education, and detailing the quality of diamonds and gems. This diamond has been laser engraved (at extra cost) with the GIA report number on its faceted girdle edge.
The previous owner obviously placed a great deal of importance on quality. The white gold setting has been crafted from premium 18-karat white gold and hand set with 10 complimentary VS-GH shoulder diamonds adding an extra 0.20 carats of accenting sparkle. This ring measures a finger size of 6 1/2 and weighs over 3.5 grams.
If you need the ring adjusted in size, one of our on-site goldsmiths should be able to accomplish this task in just a couple of days. The classic 6-prong setting offers excellent security and can easily be matched with any flat-edged wedding or anniversary ring. This triple X-rated diamond ring is estate priced at $17,000.00. If you like to choose a new ring design or custom make a different jewellery item, the diamond can be purchased alone for $16,500.00 CAD. Stock #101-00468.
Not all hollow jewellery is made the same. There are manufactures out there producing ultra light weight hollow jewellery for the sole purpose of making the item as cheap as possible, without any consideration of quality or longevity. We have recently encountered earring posts on studs that were actually hollow. While our latest estate chain is indeed hollow, it still was built to last for many decades. The heavy gauge construction still weighs in at a substantial 50.8 grams. No doubt money was saved producing it with a hollow core but that certainly wasn’t the main consideration. The links were formed from premium 18 karat gold of rich colour with a beautiful finish that the Italians are famous for. It comes with a large lobster that looks like new; the chain ends and each of the 8.1mm wide links display no signs wear either.
24 to 26 inches is the most popular length for men’s chains. This one is 24 1/2 inches in long giving it the perfect look for most gent’s tastes. The necklace could also be appropriate for the woman who likes the longer look to wear overtop a blouse. We could remove a section and easily turn it into a matching bracelet for you. We always like to point out the fact the price of gold is still on the rise. At the current price of gold ($4,163.00 per ounce CAD Feb. 18th. 2025) this chain contains over $5,100.00 is just the recyclable gold content it contains. If you tried to purchase something like this new, expect to see prices approaching $12,000.00. This like new chain is estate priced at $7,200.00 CAD. Stock #431-00674.
SOLD
This swirling dinner ring boasts a 1.15ct oval blue sapphire at its core, a gem that has captured hearts throughout history with its vivid and captivating hue. The presence of specific mineral elements, such as titanium and iron, plays a crucial role in determining the sapphire’s distinctive blue hue.
Such tough metals are responsible of the bright blue exhibited in today’s example. This is a high quality sapphire not like most of the inky dark blue (almost black) sapphires seen these days.
The stone also features a bisecting line of galaxy-like fingerprint inclusions running right across its width. Surrounding the sapphire are 20 round single-cut diamonds, totaling 0.20 carats, carefully set to accentuate the ring’s graceful design. Weighing a delicate 4.1 grams and sized at 6 with ample room for adjustment, the piece marries timeless sophistication with modern wearability. Estate price $1,365.00 CAD. Stock #206-00496.

Everybody looking for a rugged and reliable divers watch knows the Rolex Submariner as the industry benchmark and for good reason. For close to 70 years the Submariner defined the segment. The only downside of ownership in the Submariner club is the price of admission these days. Finding a good used one with documentation is around $15,000.00 CAD. For that amount of money, you’ll get what hundreds of thousands of others already have. There are many other great brands out there that offer similar performance, a rich history, and arguably more interesting designs. The Tutima Pacific 677 at less than 1/10th the price is the perfect watch for someone who wants an automatic Swiss diver’s watch but doesn’t want to devote 10 mortgage payments acquiring one. Since 1927 Tutima has produced timepieces known for legibility in demanding environments. They are a gritty brand that rebounded from almost complete destruction after their factory was destroyed during an air raid bombing only hours before the end of World War II was declared. In the mid-1980s a Tutima chronograph was made the official pilot’s watch for NATO. The Pacific 677 is by any standard a watch of thoughtful, purposeful design and execution. The flat sapphire crystal is exponentially tougher and harder than any glass counterpart. The day-glow orange second hand boldly stands out and can’t be confused with a minute hand.
One way ratcheting bezel can indicate elapsed time up to 60 minutes. A threaded crown and case back provide water-resistance of over 600 feet. Simple luminous hands and hour markers provide clear time interpretation in any lighting condition.
A useful calendar displays the day of the month along with the day of the week (in French and English). The comfortable, solid link, stainless steel bracelet is secured by proper screws, not bushed rivets (that will eventually fail in other similarly priced watches).
A quality Swiss-made 25 jewel ETA 2836-2 keeps track of the time-keeping duties with the 43mm case. This movement is based on the workhorse 2824 which has been used in many high-end Swiss brands since the 1970s but can trace its roots back decades before that. Although not chronometer rated in Tutima specification, it is accurate and ultra-reliable. The watch is in excellent original condition and has never been polished or refinished. The largest blemish is an impact mark on the rotating bezel at the 18-minute position.
The sandblasted finish on the case and bracelet is resistant to showing scratches while at the same time offering a serious professional look. It comes complete with an extra generic fabric strap, a complete set of instructions, fully endorsed warranty papers, a plastic product tag, and its original zippered box. We are happy to provide the next owner with a 1-year complimentary warranty. This watch is estate priced at $1,325.00 CAD. Stock #501-00146.

If only your last used car came as well documented as this watch. Buying a preowned Rolex is much the same as buying a used car, except once you’re ready to move on the Rolex is still going to be worth a bunch of money. Condition and history are paramount considerations when it comes to purchasing anything that’s had a previous owner. This 1 owner Datejust 36mm 116203 was purchased new in Kitchener Ontario in December 2004.
At that time this watch had a suggested retail price of $9,580.00 CAD. 19 years later this watch is an excellent value at $12,000.00. It was worn as a timekeeping tool by its previous owner every day. He kept to the Rolex maintenance schedule of a complete servicing to the automatic movement every 5 years.
The original service invoices are included with the package. The second service was performed at Rolex Canada in June 2022. Since the June 22 service, the watch was only worn for less than 4 months. The watch no longer sports the striped service stickers and shows some minor scratches that are easily removed should you wish.
Included with the recent service was a professional refinishing of the 18-karat yellow gold and stainless steel case. The watch now looks practically new aside from only a little bit of sag/wear in the full-length Oyster bracelet.
Complete kit, 1 owner, Rolex watches are not that uncommon, but one with full factory service history is quite rare. You can rest assured the watch was serviced to Rolex’s high standards and will continue to function as a reliable luxury watch for decades to come. The classic two-tone Datejust with the smooth bezel and sportier Oyster bracelet is much less common than the typical fluted bezel with the Jubilee bracelet we usually see. Needless to say, the watch comes with all its original documentation and packaging.
If you bought a used car 20 years ago for the cost of this watch, that car was likely scrapped ten years ago and you likely received a few hundred dollars for it. Buying a new or used Rolex often works out to be an unlikely but positive investment decision. If you’re considering buying a preowned Rolex this is a great example to consider.
We’re always looking for good quality trade-ins. Bring us your old gold, silver, watches, diamonds, or other used jewellery. There is always room in our estate department for another previously enjoyed treasure. Once the Rolex service warranty expires in June of 2024, our 1-year warranty kicks in and our 5-year prorated warranty will extend decreasing coverage until June 2027.
This is now a retired model but the replacement model 126203 looks pretty much the same priced at $15,550.00. There are very few consumer products that retain their value better than a Rolex watch. This excellent example is estate priced at $12,000.00 CAD. Stock #505-00248.
Our estate department is always treating us with unusual jewellery to showcase. Sapphire earrings are not uncommon but when the sapphires are a vivid orange colour we get excited. There is no doubt this set of earrings were a special request from someone who wanted something they just couldn’t find anywhere. We’ve never seen a pair of orange sapphire earrings other than perhaps a small simple stud design. According to the average dimensions of 7.3mm x 5.8 we estimate the sapphires weigh approximately 2.36 carats in total. It would have been quite a task to find a nice set of stones with matching dimensions and this sort of saturation in colour. Both sapphires are of very high quality displaying few inclusions and have been cut to a very high standard.
A sapphire without any colour influencing elements is completely void of colour and resemble a colourless diamond. These “white” sapphires can be confused with diamonds and have been used as diamond simulants for hundreds of years. Trace amounts of chromium and iron are what cause some sapphires to become various shades of orange. With all coloured gems it really is all about the colour. The closer you can get to pure hues with rich saturation are always the most valuable and sought after. This matching pair is about as nice as it gets when it comes to orange sapphire. The quality doesn’t stop with the sapphires, this set was crafted from upgraded 18 karat white gold with super secure, spring loaded Omega backs. These hinged backs provide a really secure lock when they pass over the wire post when closed.
Providing sparkling contrast the earrings contains a frame of round brilliant cut diamonds. The diamonds are much larger than what is usually just an outline of tiny accents. Each of the 20 diamonds weigh 0.075 carats, are of minimum VS1 clarity with G colour, and are very well cut. Even the finished weight of 5.9 grams feels of quality. If you’d prefer a more traditional butterfly friction back, the Omega backs are easily removed. This unique pair of premium quality orange sapphires and diamonds and estate priced at $3,500.00 CAD. Stock #211-00244.
Spend some time in Omega’s online museum and you’ll learn more about their watches than you’ll know what to do with. The history of the Constellation is surprisingly interesting; developed in 1952 to commemorate Omega’s chronometric achievements at the world’s observatories. The line was redesigned in 1982 launching the Constellation Manhattan which featured on its case back the Cupola of the Geneva Observatory.
The name Constellation recognizes Omega’s pursuits in chronometry (the science of accurate time measurement). At the height of pocket watch popularity in the mid-1930s, Omega scored a pair of victories in every category with a pocket watch movement. From 1945 to 1952 they won an additional six times. These accuracy competitions were performed at astronomical observatories in Geneva and England.
The case-back of every Constellation is embossed with the image of an observatory along with 8 stars, one star for each precision contest won over the years before the Constellation’s debut in 1952. This Manhattan design was the first to feature the now iconic Griffes or claws on the case, originally meant to hold the crystal in place and keep the watch watertight.
This member of that collection dates from 2009 and comes equipped with an upgraded factory-delivered mother of pearl dial with blackened Roman numerals decorating the bezel and diamond hour markers. Made from stainless steel and 18 karat yellow gold with a 25.5mm case the watch is in very good condition, showing small scuffs and scratches as a testament to careful use.
Its condition appears completely original with no signs of polishing or refinishing. The super accurate, fully jewelled quartz movement (Omega calibre 1456) is running perfectly and keeping excellent time.
A fresh high quality silver oxide battery should keep it keeping excellent time for 2 to 3 years. The very pretty natural mother of pearl dial displays a lovely iridescent effect as the watch is moved. This special diamond dial was a $950.00 upgrade over the basic painted dial. Our old 2010 dealer catalog had this watch priced at $3,850.00 CAD at a time when the Canadian dollar was pretty much at par or over the U.S. dollar. Omega still makes a version of this watch in the same 25mm size with a few style tweaks and a price of $8,500.00 CAD. The current design can be seen on the Omega website here. Comes with the original Omega fully endorsed warranty and information cards along with a travel pouch (missing pillow). Included with purchase is our complimentary 1-year warranty. This classic design Omega Constellation is estate priced at $3,000.00. Stock #510-00201.
Simple, classic heart shaped diamond pendant. The 16 round brilliant cut diamonds weigh an estimated 0.75 carats in total. The 14 karat yellow gold pendant is suspended on an 18 inch light rope chain. The total weight is 2.9 grams. Usually this popular style pendant is set with more albeit smaller diamonds. While this one is only set with 16 stones the average size is close to double the average, resulting in so much more sparkle. The diamond quality average at SI-JK produces quite the display for only $900.00. That’s only $52.50 per diamond. Stock #e13323.
In case you haven’t noticed, the price of gold has been consistently creeping up for 20 years now from $500.00 to almost $3,700.00 per ounce, that’s a lot. That number equals close to $120,000.00 CAD per kilogram! So even when gold is used in small amounts, like under 5 grams in the case of this cute bracelet, it really adds up. This bracelet is also made from top quality, 75% pure 18 karat gold. It weighs 4.69 grams and contains $418.00 in simply its gold value as of today (Nov. 6, 2024). The bracelet is designed with a heart/vine pattern and measures 5mm wide.
Perfect for someone with a very wrist as it only measures a touch over 6 1/2 inches. The heart sections features a bright cut finish applied to the surface providing a sparkling twinkle that looks like tiny diamonds at a regular viewing distance.
It is secured by a sturdy lobster clasp. The bracelet shows very little wear with the original factory applied bright white rhodium finish still fully intact. This summertime inspired bracelet is estate priced at $690.00 CAD. Stock #441-00387.
SOLD
Skull themed jewellery certainly isn’t for everyone, but I have to admit it definitely has a macabre attraction. We don’t see a lot of skull jewellery around here but when we do it seems to be custom made and made to a high standard. Our latest is this 10 karat yellow gold creation that weighs close to one full troy ounce at 29.1 grams. It was custom made by an unknown jeweller and tests approximately 10 karat purity. There are no karat or maker’s trademarks stamped inside the thick shank. You’re going to need a large finger for this one as it measures a size 12. The thick heavy construction limits our ability to adjust the fit any more than 1 or 2 sizes in either direction. Lacking facial features skulls are empty emotionless symbols. The art of the unknown jeweller has given this skull a sinister grin with intense blue sapphire eyes expressing neither friend or foe intentions.
The sapphire eyes are set deeply within the eye sockets adding an uneasy feeling to the disturbing smile. I really like this ring and the sturdy feeling of its heft. Each rounded oval sapphire has been conservatively estimated to weight 0.50 carats. They are very well matched of medium to dark royal blue colour with good clarity. Every skull jewellery item needs some flames thrown into the design and this ring doesn’t disappoint.
Both shoulders feature overlapping stylized flames running down the shank depicting a sense of intense combustion. For the right person this ring would make the ultimate accessory. This ring is in perfect condition showing little to no wear. The natural sapphire eyes remain scratch free. This statement ring is estate priced at $2,900.00 CAD. Stock #206-00568.
This is one of those rare watches that is much more than it appears. To the casual watch aficionado, it is a basic Tag Heuer diver’s watch. While that observation is correct, this watch is much more. It is one of the first watches to display the TAG HEUER logo, and also one of the first produced after the corporate takeover of Heuer Watch Company by the holding company Techniques d’Avant Garde. It could be argued that TAG helped save Heuer from bankruptcy as the quartz revolution of the 1970s brought many traditional mechanical watch manufacturers to their knees. The 844 series of Heuer and Tag Heuer watches was the company’s first proper diver’s watch and one of the few carry-over models from the Heuer era.
Heuer enjoyed much success in the world of mechanical chronographs and timers, but robust diver’s watches were something lacking from the Heuer lineup. A more affordable option to the Rolex Submariner was the goal, and the 844 was the result. The 42mm case size was larger than the Submariner, but otherwise, they look very similar. Luminous dial markers, Mercedes-style hands, flat black paint, minute markers, aluminum bezel insert, and the crown guard are all almost the same as the Rolex Submariner from the era.
The Rolex Oyster bracelet is different, but Tag Heuer’s stainless steel bracelet appears almost identical to the dressier Rolex Jubilee bracelet found on other Rolex models. It is very clear where the design inspiration for the 844 series came from.
Powering our 844/5 is an ETA-based 2824-2 automatic movement. These workhorse movements have been around since the 1970s and are renowned for their durability. Not typically chronometer rated, the ETA 2824-2 is more than accurate enough to keep you on schedule. Finding any 844 series Heuer/Tag Heuer is an uncommon event, finding one in this kind of condition almost never happens.
The dial and hands are perfect.
From the flip lock diver’s extension-equipped buckle to the screw-down crown, everything on the watch is operating as designed.
Perhaps the rarest part of the package is the fact this watch comes with its full complement of documents including the endorsed warranty papers from a Toronto Jeweller.
Even the 30 plus year old original cardboard box is here and marked with reference 844. For the Heuer collector looking for a historically important watch, this watch checks off all the boxes. This watch was serviced late in 2021 by our master watchmaker and is running as good or better than new.
It passed vacuum/pressure testing and is keeping time better than you’d expect for a NON chronometer rated automatic watch. Including a complimentary 1-year warranty, this watch is estate priced at $5,000.00 CAD. Stock #520-00041 e14384.


This is the epitome of statement jewelry, a commanding ring that dominates the hand with its impressive dimensions. Spanning 31.0mm in length, 26.6mm in width, and rising 15.0mm tall, this geometric masterpiece is a visual spectacle. The striking 21 carat emerald-cut smokey quartz that crowns this ring has been decorated with a curving under-gallery that shines through the gem as if it were underwater.
That subtle roll of light is accentuated by 0.20 carats of petite round brilliant cut diamonds, showcasing SI-GH quality. Weighing 18.8 grams, this vintage marvel is both substantial and intricately detailed.
Currently sized at 8 with room for adjustment, this statement ring invites those with a flair for the extraordinary to make a bold statement with their jewelry.
Estate price for this vintage ring $2100.00 CAD. Stock #206-00431.
The Canadian dollar keeps getting weaker and gold prices keep rising but our prices on estate jewellery is always great. Combatting inflation by purchasing an asset made from appreciating gold is not the worst thing you could do with a depreciating dollar. I bet you regret not buying that heavy gold chain when gold cost under $600.00 and ounce 20 years ago, because today gold costs more than $4,000.00 CAD. Our latest estate piece is this sapphire and diamond bracelet made from upgraded 14 karat white gold. This bracelet is a touch longer than most at 7 1/2 inches.
The 10 flexible links each contain 18 tiny round diamonds and 5 step cut dark blue square sapphires. Each of the 228 natural precious stones was set by hand, there was a lot of labor required to make this bracelet. The single cut diamonds average I1-J in quality. At 10.5mm wide, this bracelet has good presence on the wrist, at well over half an ounce in weight (17.4 grams) you can feel the quality.
The link joints show almost no wear and many sections still retain the original factory rhodium plating. Security was an important consideration when it was made. The primary locking plunger style box clasp is supported by 2 additional safety catches.
The master clasp blends well in the link pattern demonstrating great attention to detail from the manufacturer. If you have a petite wrist, a full link could easily be removed and turned into a matching pendant. This bracelet is estate priced at $2,150.00 CAD. Stock #241-00102.
At 8.6mm wide this sweet little double halo offers a large footprint for a small price point. The princess cut center is Canadian from the Ekati mine in the North West Territories and comes with its original certificate of origin. It weighs 0.30 carats of I1-I quality and is accented by 52 petite round brilliant cuts that total an additional 0.30 carats weight of SI-GH quality. The petite 2.5 gram ring currently measures a finger size 4 1/2 with a bit of room to adjust.
The 14 karat white gold ring comes from Canadian retailer Charm Diamonds Centres. It is accompanied by its original box, a certificate of valuation stating a replacement price of $2,925.00 CAD, and the original invoice. Our estate price for this hardly worn, 4 year old ring is $1,393.00 CAD. Stock #101-00363.


If you didn’t think you could afford a high quality Canadian diamond ring here you go. It comes with all kinds of documents and certificates. A Gem Scan certificate of Evaluation dated Feb-2006 proclaiming a replacement value of $2050.00, a Gem Scan wallet card and Northwest Territories Government certificate of authenticity with registered Gemprint. Polar Ice diamonds are one of the very few Canadian diamond brands that not only are mined in Canada but are also completely cut and polished in Canada too. As with all Canadian diamonds a unique laser engraved registered number can be seen on the girdle using powerful magnification. The 2.4 gram 18 karat white gold setting is quite attractive; a soft twist formed by the shoulders frames the diamond in a subtle embrace. Measuring the average ladies finger size of 6.5 the ring can be adjusted up or down a couples sizes to fit your special lady. Our on site gold smiths can accomplish this task sometimes the same day.
The ring is in perfect condition, the only thing it’s lacking is a hand to be displayed on. Complete with the traditional Bill Le Boeuf Jewellers small blue ring box the ring is estate priced at $1,036.00 CAD. Stock #e9123.
Tahitian pearls are not only the most valuable pearl, they are also cultured with the greatest level of environmental care in an already environmentally conscious industry. The pinctada margaritifera mollusk can grow to ten pounds in their lifetime, and that lifetime usually covers about 20 years but some have been known to live to 50 years old. They are also very sensitive to changes in water temperature and pollution, making pearl farmers very vocal supporters of ocean cleanup efforts and climate change. If the oceans warm too much pearl mollusks would eventually die off and the pearl industry would collapse. The pinctada margaritifera takes 18 months to 2 years to grow a Tahitian pearl. They aren’t killed in the pearl harvesting process. Farmers need to maximize the yield of their mollusks. It wouldn’t make sense to kill one that has reached the larger size required to grow the most valuable pearls.
Tahitian pearls come in a range of colours known in the trade as aubergine (dark grayish-purple bodycolor), pistachio (yellowish-green to greenish-yellow bodycolor), or peacock (dark green-gray to blue-gray body color with pink to purple overtones). Our 12.4mm jumbo Tahitian pearl is of the aubergine variety, and of good to very good quality, displaying just a small dimple blemish toward the bottom (not visible from the top).
The dark pearl is perched on a simple 14 karat white gold ring with a flat 3mm wide shank. Set on each shoulder are four smalll round brilliant cut diamonds of SI-K quality. The 8 diamonds are estimated to weigh 0.20 carats total weight. The ring measures a finger size 8 and weighs 5.7 grams. One of our goldsmiths can alter the fit to suit a range of finger sizes if needed. The ring is in excellent condition still showcasing its undisturbed original hard rhodium plating. Estate priced at $900.00 CAD. Stock #206-00570. 
The spiraling helix cage diamond pendant measures 34.2mm long by 9.6mm wide and has been built to roll! The delicately graduated diamonds stretch across 2/3rds of the pendant’s surface, allowing it to roll back and forth during wear and still show diamonds.
The 0.20 carats total weight of SI-H round brilliant cuts are accented by highly polished rhodium-plated 14-karat white gold. The like-new pendant weighs in at a sturdy 3.57 grams for the estate price of $770.00 CAD. Stock #161-00215.

It’s hard to grasp the scale of this ring until you put it on, so trust me when I say it’s digit-dominating! At its widest point, the ring spans 22.8mm. But, despite that size, the ring is surprisingly subtle, the mirror finish combined with the curving surfaces of the yellow gold create a fun-house camouflage. That illusion leaves the trailing comet of diamonds and sapphire to stand out prominently on the finger.
The night sky pear-shaped sapphire weighs in at approximately 0.78 carats and is quite lively despite its deep colour. It’s tailed by a scattering of round brilliant cut diamonds that equal 0.50 carats together, all of SI-GH quality. The one-of-a-kind 14 karat ring weighs in at 7.5 grams and currently measures a finger size 7 with some room to adjust. Estate price $1,820.00 CAD. Stock #206-00314.
Fun faux Leopard prints and other animal patterns have always been popular in fashion. A little over 100 years ago Leopard patterns were the “it” print for everything from home decor to women’s fashion; especially in France. The popularity of the medium-sized cats prompted Louis Cartier to include a panther on an invitation to his 1914 exhibition. Then Cartier designer Charles Jacqueau included the spots in two of his designs. In 1917 the first full panther appeared on a vanity case Louis Cartier had specially made for Jeanne Toussaint. She was eventually persuaded to start working for Cartier in the early 1920s and panthers featured heavily in her work. The full Cartier panther history can be read in this fascinating article by Marion Fasel. The interesting thing about this breed of jewellery is that it’s based on inaccurate species identification. The panther is actually the black or dark colour breed of jaguars and leopards, so the famous Cartier Panther is in fact a leopard.
Our latest Panther/Leopard inspired piece is this wonderful pendant. It it extremely versatile with a hinged bail with safety clasp that will fit almost any chain or bead necklace, even those without a clasp.
The pendant is of very good construction featuring 79 fully faceted round diamonds and sapphires. The diamonds are of I1-J quality and the sapphire are good quality dark royal blue. All totaled we estimate the diamonds and sapphires weigh approximately 1.75 carats. The pendant weighs a substantial 11.6 grams in upgraded 14 karat yellow gold.
The yellow gold has been rhodium plated over the stone settings and on the back to promote contrast and brilliance. It’s a beautiful object of art and a great example of a classic jewellery design. Estate priced at $2,275.00 CAD. Stock #231-00362.
In the past 10 years, we’ve only had the opportunity to showcase 3 natural alexandrite pieces in our estate department; an apt example of the rarity of one of the world’s most coveted gems! Alexandrite was something out of a fairy tale when it was discovered in the mountains of Russia in 1830. A gem that changes colour as it passes from sunlight into candlelight, as if responding to the setting of the sun. In daylight, the original Russian gems were bright emerald green and in incandescent light, they went red like rubies. Modern examples from Brazil, East Africa, and Sri Lanka have supplemented the extinct Russian sources and show a variety of blue/greens and purple/reds.
When it was originally discovered, it was named for the soon-to-be Tzar of Russian Alexander II, a perfect tribute as the gem’s colours mirrored the national military colours at the time. The example we have today features 9 natural Brazilian alexandrites that have been oval mixed-cut to best showcase their colours. The combined 2.00 carats display a very strong colour change from bluish-green (almost a peacock green) to purplish-red. They display the best colour change we’ve ever seen in Brazilian material.
The necklace brackets the gems with trios of channel set I1-H round brilliant cut diamonds. Their addition of 0.75 carats total weight of sparkle helps bring attention to the natural fire of alexandrite, which displays purple, pink, and red flashes when showing blue-green body colour. The neckpiece itself is made from 14 karat yellow gold and measures close to 20 inches long with a sturdy white gold box catch and additional safety lock.
The piece came with its original UGL certificate from New York and a November 2021 appraisal from Harold Weinstein LTD. in Toronto, both displaying slightly more optimistic assessments of the piece than we settled for. The UGL cert from 2010 states a replacement value of $9,000.00 USD and the Harold Weinstein document states a value of $21,000.00. We feel a competitive price in Canadian dollars is $12,000.00 and our estate price for the like-new necklace is $8,400.00 CAD. Stock #e14552 231-00114.

Keltica is a Canadian manufacturer that we’ve been proud to partner with for many years. The quality of craftsmanship is uncompromising and the designers have a passion for Celtic heritage that is evident in their work. This lesser seen eternity knot is a dynamic open wire design. It proudly states its presence in 14 karat white gold without looking bulky. The pattern on both, in the proper Celtic tradition, goes continually around in an unbroken pattern. The center jewel is a sparkling 0.46 carat round brilliant cut diamond of strong I1-I quality that is secured in a sturdy partial bezel setting.
Both rings measure a small finger size 4 3/4 with room to adjust but the pattern will be interrupted. The pair were purchased new from Bill Le Boeuf Jewellers about 6 years ago. The base Keltica model can be seen on their website. Our estate price for the excellent condition set is $1,400.00 CAD. Stock number e11413.
Effy is a brand that should be familiar to most people, but in the event you aren’t one of them they are known for pieces like this; diamond-encrusted and featuring head-turning gemstones. Today’s example is a 14mm x 7mm marquise scissor-cut smokey quartz, the perfect pairing for warm 14-karat yellow gold.
The softer tones of the gem and gold are set off by 0.25 carats total weight of SI-I1-I round brilliant cut diamonds, 72 of them in total. The heavy gauge articulated bail has been left plain but features a silky sandpaper finish as a final touch. Estate price for the like-new piece is $630.00 CAD. Stock #231-00206.
Quad sets are a staple for most big-box jewellery retailers, they provide a massive footprint for a relatively low price-point. This set features the standard invisible set quad of modified princess cut diamonds spanning an impressive 7.94mm and perched 8.10mm off of the finger.
The quad is accented by an additional 18 round brilliant cut diamonds that bump the total carat weight of the ring up to 1.50 carats.
The diamonds are all of I1-I quality and are backed by brightly rhodium enhanced 14 karat white gold. The set currently measures a finger size 8 with some room to adjust. This set offers a huge bang for the buck, preowned priced at $1,650.00 CAD. Stock #101-00421.
We are swimming in stock projects, but some things just need to be pushed to the front of the line. So when this pear-shaped diamond came in at the center of a dated engagement ring we just had to give it a second chance.
Instead of adding it to our large stock of loose estate diamonds, we found it a delicate halo pendant for its new home. The transformation was astounding, letting the 1.01 carat estate pear-shaped diamond show off its brilliance by letting it dance freely during wear on the new jointed pendant.
The halo of petite diamonds also increased the apparent footprint of the stone, bumping it to 8.37mm wide by 11.7mm. The 9mm long bail is large enough to accommodate most chains and its 6 diamonds of I1-GH quality bump the total weight of the pendant to 1.17 carats. The large central diamond is an eye-clean SI1 with a bright G colour.
The brand new 14-karat pendant is currently suspended from a 17-inch curb link Italian-made chain that is sold separately for $350.00 CAD. The pendant (without a chain) is priced at $5,999.00 CAD. Stock #161-00201.
We often are asked for advice on what quality of diamond people should buy. That is a difficult question to answer, but one thing I’d do if I was buying one my myself of someone I love would be to spend my budget on things that you can easily see. I mean there is very little perceptible difference among the first 5 or 6 clarity grades to a naked eye. The same can be said for the first 3 or 4 grades of colour. The difference between and excellent cut and a very good cut could be something as minor as a 1 percent difference in total depth or crown height. Getting a good balance of the 4 Cs are a safe way to get a sparkling diamond, and speaking with a traded diamond grader or gemologist helps too. Our latest estate diamond ring is an excellent example of having all the right characteristics in balance, resulting in a very pretty stone and setting that doesn’t cost much more than a mortgage payment.
The weight is nicely over the 1/2 carat mark at 0.56ct. The colour is exceptional as per GemScan report of E (we concur). The cutting geometry is described as excellent and we agree. On paper the I1 clarity may be considered a compromise but the two white feathers within the table border are not distracting and are also very difficult the see without artificial magnification.
There are many less attractive, hazy looking SI2 or even SI1 diamonds out there. The premium quality 18 karat white gold setting measures 3.4mm wide in a finger size 6 1/2, and contains a surprise diamond bezel set in the gallery on both sides.
Our onsite goldsmiths can adjust the size up or down if required. This style engagement ring will fit any flat edged wedding or anniversary style ring. No need to make an expensive custom made ring to match this one. The ring is in like new condition showing no areas of wear. Comes with a GemScan Pre-Cert and a AGL (Accurate Gemological Laboratories Inc.) appraisal from November 2013 suggesting a replacement value of $4,600.00 plus tax.
While this value could be considered a little optimistic, there is no question our estate price of just $1,890.00 represents fantastic value. Stock #101-00502.
Movado, like many Swiss watch manufacturers, was established in the late 1800s. They first began producing watches in the town of La Chaux-de-fonds Switzerland, the birthplace of numerous high-quality watch brands. Also like many other Swiss brands, mergers and alliances formed over the years. After the quartz revolution of the 1970s, numerous Swiss brands disappeared or merged with other companies. In the 1980s Movado was purchased by North American Watch, later changing its name to The Movado Group. The less is more philosophy has been a Movado look since the introduction of the Museum watch in the 1940s. A large dot at 12:00 on the face symbolized the sun, the single index was the only reference marker on the entire dial.
The “Museum” style soon defined the brand, and to this day it is the look that personifies Movado. Our lady’s stainless steel model features the classic glossy black museum dial. The highly polished, reflective hands are surprisingly easy to see and interpret the time with. The brand new black leather Hirsch strap integrates perfectly with the 23mm round case.
All stainless steel construction, with a synthetic sapphire crystal that spans the entire top surface, makes for a very modern. Very good condition, showing only a few light scratches on the case. An ultra accurate Swiss quartz movement is operating perfectly within the super thin 4.6mm case. We are pleased to offer the new owner a complimentary 1-year warranty (prorated for 5 years). The estate price is $400.00 CAD. Stock #501-00157.
Spend a little time in Omega’s online museum and you’ll learn more about their watches than you’ll know what to do with. The history of their flagship Constellation is surprisingly interesting; developed in 1952 to commemorate Omega’s chronometric achievements at the world’s observatories. The line was redesigned in 1982 launching the Constellation Manhattan which featured on its case back the Cupola of the Geneva Observatory and 8 stars as a homage to the lines beginnings. This watch was also the first to feature the now iconic Griffes or claws on the case, originally meant to hold the crystal in place and help keep the watch water resistant. To this day these features can be found on the Constellation.
This member of that collection dates from 1995 and is one of the last examples of the first generation Manhattans. It comes with the popular and neutral tone champagne dial that blends well with any colour scheme. It also features a solid 18 karat yellow gold bezel and upgraded full bar 18 karat gold link hinge points.
The rest of the watch is constructed from stainless steel. The 22.3mm case may be considered a bit on the smaller size but is perfect for the 80s-90s vintage revival we are seeing.
Aside from some corrosion at the edge of the dial at 4:00 and 5:00 o’clock the watch is in very good condition.
The full length bracelet shows no stretch and just a tiny amount of sag.
A sliding clasp keeps the buckle length quite short but opens up to easily fit over even a larger hand.
Powering the watch is a precision Swiss made quartz movement that is working great and keeping excellent time. I can’t remember the last time we had a 1st generation Constellation as part of our estate offerings.
Omega still produce a watch that looks similar to this Constellation Manhattan that can been seen on their website for $8,100.00. The modern version is a touch larger at 25mm millimeters and features 12 small diamonds on the dial. We are happy to supply the next owner with a 1-year warranty covering and mechanical defect or failure excluding damage caused by misuse or moisture. This 30 year old vintage Omega is estate priced at $1,000.00 CAD. Stock #510-00203.
Breitling’s core group of customers are typically aviation, racing, and diving enthusiasts, plus those generally interested in sporting watches. Our latest Breitling isn’t really any of those things except perhaps somewhat sporting with its 44mm case size, water resistance rating of 100 meters, and stainless steel construction. The Unitime is a watch designed for someone who is interested in knowing what time it is anywhere in the world. International businessmen and world travelers could benefit from this slick world timer. Once you synchronize your local time with the corresponding city on the outer rotating disc you can instantly see the time in major cities throughout the world.
If you travel to a different time zone the hour hand can be adjusted to display your new local time without affecting the times of any other city. When jumping time zones the minute and second hands are unaffected and continue to operate, maintaining accurate minutes/seconds. This watch isn’t nearly as complicated as it looks once you’ve played with it a little bit. The Unitime isn’t the first world timer from Breitling as they made a version similar in function to this way back in the 1950s.
What is different is the fact Breitling produced the world time module that they have adapted to fit modified ETA 2892. It is good for 70 hours of power reserve and has been officially certified chronometer status. This is also the first watch that Breitling has produced with a tungsten carbide bezel. This super tough metal will keep the Unitime Sleek T bezel looking scratch free and maintain its sharp crisp edge. The rest of the case is crafted from highly polished stainless steel. A 22mm lug width allows an easy selection of leather strap choices should you prefer something other than the blemish free, factory-equipped white stitched black calf.
A handy 31-day calendar with luminous hands and markers and some useful extra utility to this unique Breitling.
This watch appears unworn and is without blemish. It comes complete with its original box, documents, and endorsed warranty card.
It is running flawlessly with all functions operating as designed. The watch remains under the factory’s 2-year international warranty until November 2023. Bill Le Boeuf Jewellers will extend this warranty for 1 full year and prorate coverage for an additional 5 more years. This retired model is estate priced at $5,250.00 CAD. Stock #515-00066.
International Watch Company’s Fliegeruhr (pilot’s watch) is a formidable piece of equipment. The large stainless steel case measures 44mm in diameter and is rather thick at 16.6mm. The robust dimensions are necessary for the purpose it was designed for, an easy to use, easy to interpret timekeeping chronograph. The large dial features simple Arabic hour markers and a set of large hands. All the important timekeeping references wave been treated with highly luminous pigment for use under any lighting condition.
We see plenty of luxury Swiss made chronographs that come through our estate department but this one offers an addition function.
That extra button at 10:00 o’clock can pause the silver chronograph seconds hand and allow a red “shadow” seconds hand to continue recording elapsed seconds. Push the button again and the silver hand instantly catches up and hides away until a spilt-time is needed again.
The different colour registers are not for aesthetics. The chronograph minute and hour registers are charcoal coloured to distinguish them from the 9:00 o’clock constant seconds register. A large day-date calendar at 3:00 o’clock round out all the utility this watch has to offer.
Time keeping duties are handled by IWC calibre 79230, itself a highly modified Valjoux 7750. IWC watchmakers added the split-seconds module, and adjusted the 29 jewel movement in 5 different positions for a higher standards of accuracy.
The nicely decorated movement is protected from the effects of magnetism by an iron liner hidden underneath the heavy stainless steel threaded case back.
This watch is in original condition, it doesn’t appear refinished or polished. The original dark brown strap is decent condition but the factory single end keeper has been replaced with two generic versions.
The oversized winding/setting crown is both easy to use and protected from accidental adjustment as it is threaded into the case.
It is running great and keeping very good time with all functions operating flawlessly. There are no original documents or packaging with this IWC. It comes with our complimentary 1-year warranty (pro-rated for 4 additional years). Estate priced at $5,970.00 CAD. Stock #501-0342.
It’s unusual for us to showcase a Rolex that is not an Oyster. The Rolex Oyster case is defined by its screw-down crown, threaded case back, and crystal (either plastic or sapphire) that is secured by a tension-fit bezel. This 1960s Rolex presentation watch comes with none of those attributes.
It does however comes with some Canadian history and a legendary calibre 1520 automatic winding 26-jewel Rolex movement. This watch was awarded to a 25-year employee of Canada Shipship Lines in 1969. You’d think a Rolex given to a sailor would be the more rugged stainless steel Oyster on a bracelet.
Rolex Oysters and far more watertight and much better equipped to deal with the working lifestyle of a sailor onboard a large ship. Judging from the lack of wear and tear on the case, the absence of multiple service etchings inside the case, and general excellent overall condition; I’d say the previous owner only used this watch for special occasions outside his day-to-day tasks. Powering the 35mm solid gold watch is the 26-jewel Rolex 1520 automatic movement. If don’t recognize the mechanism you certainly know the model that also shared this workhorse calibre.
Some very collectible Submariners from 1960s through 1980 also used the calibre 1520. Robust construction and reliability make this movement a favorite of watchmakers. Excellent condition examples of these movements are in high demand by collectors wishing to restore high value Submariners. Pre-owned Rolex 1520s movements generally have prices in the $3,000.00 to $4,000.00 range. The dressy nature of this watch is evident from the beautiful silver dial, gold hands, and simple hour markers. A subtle minute track and -T SWISS T- is the only other print on the clear and legible dial. The Ts bracketing the SWISS signify the luminous material used on the hour plots and hands was made from tritium.
The heavy case (16.7 grams net with plastic crystal) was crafted from 14-karat gold and is fully polished.
The lug edges are crisp and sharp showing little wear.
The plastic crystal is thought to be original and is practically blemish free offering excellent optics. The simple dial only reads ROLEX in perfect black text; just in case the coronet logo wasn’t enough of a reminder.
A brand new 20mm black leather Hirsh strap has been fitted to this classic looking dress watch. If you want a simple dressy Rolex like nothing else on the market, this very rare presentation model may be for you.
The next owner will benefit from our complimentary 1-year (prorated 5 years) warranty. This watch does not come with any original documentation or packaging. Estate priced at $6,000.00 CAD. Stock #505-00403.

The latest addition to our estate collection is this Internally Flawless (IF), natural colour, fancy yellow diamond. In terms of rare minerals, diamonds are scarce but not too uncommon. Natural yellow diamonds on the other hand are indeed few and far between.
Our in store diamond database contains close to 700,000 diamonds from the world’s largest cutting factories, but only around 2,800 are fancy yellow diamonds. Of those, only around 50 are this size or larger and of the same or better quality. That works out to less than 1 per every 100,000 diamonds. Diamonds like this are not readily available or replaceable. Yellow diamonds occur when trace amounts of nitrogen are present when the rough diamond crystal formed billions of years ago. This yellow diamond is of Internally Flawless (IF) clarity.
This means there are no detectable inclusions visible by a trained diamond grader when viewed at 10 times magnification. In person, this diamond is far more brilliant and bright than these still images show. Unlike most yellow diamonds, this one exhibits no secondary modifying brown hues as would otherwise be noted in the GIA report, pure primary spectral yellow is the most desirable colour. The diamond comes with a GIA report from the summer of 2012. It has never been assembled into a piece of jewellery and remains in perfect condition. The full Gemological Institute of America report can be seen by clicking here.
What sort of jewellery do you think this rare diamond would look good in? I’m thinking perhaps a drop pendant or maybe a halo style ring with contrasting white diamonds. The possibilities are only limited by your imagination. This diamond was originally purchased through Guild Hall Wealth Management. You may have heard their Sunday morning program on AM 640 Toronto. The diamond comes with lots of articles copied from Money Magazine, The Wall Street Journal, Forbes.com, and various other internally produced documents from Gild Hall.
A March 2015 Diamond Grading Report and Appraisal from Harold Weinstein suggests an estimated replacement value of $30,400.00 CAD.
The original bill of sale (April 9th, 2014) shows an initial purchase price of $14,862.84 plus sales tax.
This perfect condition, fancy yellow, natural diamond is estate priced at $9,000.00 CAD. Stock number 191-00131.
When we are asked to weigh in on the debate of platinum versus white gold we like to boil it down to the one point the metals differ on; do you want it to last one lifetime or many? On a microscopic level when you scratch gold you are taking some metal away. But platinum has this unique quality of sticking to itself, so when you scratch it you are mostly just moving the platinum around, instead of removing metal. So a gold ring will be so thin and worn down by the end of the wearer’s lifetime that there will be nothing to pass on but the diamond.
If you are looking to start an heirloom tradition this might be the ring you are after. The neutral nature of a solitaire engagement ring ensures that it won’t look dated by the time you are ready to pass it on. Especially when you consider that the solitaire has been popular since its invention in 1886.
This 3.9 gram solitaire features a 0.37 carat round brilliant cut diamond of bright, eye-clean SI1-H quality that sparkles brightly at the slightest movement. Estate price for a timeless classic $1,050.00 CAD. Stock #e13766.

When the Tudor Black Bay series was released in 2012 it was obviously heavily inspired by the ever-popular Tudor Submariners of the 1950s, featuring the unique contrasting, luminous snowflake hour hand.
Initially only available in red and then blue, its design was so classic and perfectly executed it was honored by the jury of the Grand Prix d’Horlogerie in Geneva in 2013. The highly anticipated Black Bay “Black” was released in the fall of 2015 and was available on either a leather strap or metal bracelet.
A few months after the release of the Black Bay Black, Tudor made an announcement at Baselworld 2016 that all Tudor Black Bay models would soon feature an in-house designed and manufactured movement. What is interesting and noteworthy, is that would make the Black Bay Black with Tudor 2824 caliber available for sale for less than a year. The Tudor 2824 caliber movement is based on an ETA 2824 movement used by nearly every luxury watch brand. It is a time-tested (pun intended), trusted movement known for its precision and reliability. However, Tudor’s watchmaking expertise improved upon the ETA incabloc shock protection and regulation system making the movement more specific to the Black Bay. The easiest way to tell the difference between the two is that the original Tudor Black Bay Black had the iconic Tudor Rose emblem on the dial, rose crown, and curved text on the dial.

The new generation Black Bays with the in-house calibre feature the Tudor Shield on the dial, crown, and straight horizontal text. All ETA2824 Black Bay models come with an accessory cloth NATO style strap in addition to a metal bracelet or leather strap (but not both). One of the great things about our Black Bay Black is that it comes with all three bracelet/strap options.
When it was initially purchased in March 2016, the watch came on a stainless-steel bracelet. The original owner decided to purchase the OEM distressed black leather strap with a matching Tudor deployment buckle to have the option to change up the look.
Metal, leather, and nylon bracelets are all in very good condition. That is three unique looks for one watch. The watch is in very good condition showing some scuffs and scratches but remains in its original unpolished condition.
Keeping with the theme of an homage to vintage dive watches Tudor chose to use a flat black dial with gold writing to be paired with rose gold snowflake hands and hour indices giving it a similar look to how early Submariners have aged. Heritage Black Bay Blacks were produced for less than one year making them far rarer than the red or blue bezel versions. Its short production run will surely lead to an increase in value over time and will solidify a place in the horological annals. Comes complete with inner/outer boxes (watch cuff missing), accessories, booklets, hang-tag, and a 1-year Bill Le Boeuf Jewellers warranty. The previous owner even kept the white cardboard sleeve showing the correct serial number on the outside sticker. You are not likely to find a more complete example than this one. Estate priced at $6,875.00 CAD. Stock #505-00131.
SOLD
The first time we sold this watch it was only 6 weeks old. The second owner recently traded it for a different Seamaster he discovered in our estate collection. Now it it is looking for a new home. This Omega Seamaster Aqua Terra was purchased new from an authorized Canadian Omega dealer on April 24th 2016.
The high grade stainless steel 43mm diameter case features Omega’s curved lyre lugs, high polished fixed bezel, signed screw down crown, and a domed anti reflective sapphire crystal. The teak concept pattern on the white dial was designed by Omega to recall the wooden decks of luxury sailboats and it’s been boldly accented with 18 karat rose gold luminous dial markers and hands. Precise microscopic parallel etchings on the hands and hours markers disperse reflected light in a subtle rainbow effect that is memorizing to see and can’t accurately be captured with our limited photography skills. The fine details and finish of the dial and applied details are second to none in the industry.
The real achievement of this watch stands at the 3 o’clock position, a month/day calendar display that automatically recognizes months with 30 and 31 days. To account for the short month of February, the date only ever needs to be set once a year on the first of March. With satellite technologies in many quartz movements that can globally position themselves to account for changes in time zones this annual calendar may not seem like much, but consider that this annual calendar with its instantaneous jump has been incorporated into a Swiss made certified chronometer movement that already features a 55 hour power reserve, silicone balance spring on free sprung balance, two spring barrels mounted in series, and automatic winding in both directions. The sophistication of Omega’s Co-Axial Calibre 8601 allows the watch to run longer with more precision between services. The rhodium plated and red accented movement can be viewed beneath the antireflective sapphire crystal on the screw on case back.
As expected from a Seamaster the watch is water resistant to 150 meters or 500 feet. The case and bracelet have the original factory finish showing signs of wear that could be refinished away if you wish for no extra charge.
The previous owner purchased a genuine Omega NATO style leather/fabric strap and worn it like that for a while.
The $230.00 strap (receipt included) shows significant wear but can still be safely worn if you’d like to change the look to something a little more casual.
It is a pity Omega have decided no long to make the Annual Calendar Aqua Terra. They only offer the basic date display (no month display) that requires date correction 5 times per year.
The smaller size 41mm current version (1.220.10.41.21.02.001) comes with a retail price of $8,500.00 and can be seen online here. Our estate example comes with the original inner/outer box, endorsed Canadian warranty card, instructions, wallet, and the extra Omega NATO strap. Before this watch was retired from the Omega lineup, it had a price of $9,650.00 CAD. Our estate price for this 8 year old annual calendar Seamaster is $5,200.00 CAD. Stock #510-00178.
From cell phones to automobiles and refrigerators to ping pong balls; nearly every consumer brand name item carries a manufacturer’s suggested retail price. The key to getting great value is knowing if and where you can get a lower than MSRP price. Shopping for diamonds is very difficult because they do not have a suggested retail price. The price you see is dictated by the level of profit needed by the vendor to cover their overhead and hopefully maintain a reasonable surplus to supply a decent income for the employees and owners. Modern commerce is extremely competitive, we welcome and encourage our customers to become informed and seek out the best value in diamonds. When you know what you’re comparing you know how to find the best value. Bill Le Boeuf Jewellers is always about full disclosure with all our diamonds and jewellery in general. We’ll always show you everything needed for you to determine where the best value is in both new and estate jewellery. Over 60 years experience, much lower than average overhead, unique diamond sourcing/buying strategies, and generally just a lower markup give Bill Le Boeuf Jewellers perhaps an unfair advantage. I’m guessing our clients don’t really care about all that, they just care about getting the absolute best value. We’re happy to deliver fantastic value plus deliver a level of service only a fiercely independent vendor can offer. This pretty diamond is a great example of the type of value we can offer at Bill Le Boeuf Jewellers. It’s GIA certified, so comparing its attributes is just a click away by looking at the certification report online. This diamond was purchased in the spring of 2017 for almost $1300.00 plus tax.
It comes complete with the original bill of sale, copy of GIA certificate, diamond card, guarantee, and folder. The diamond was never assembled into a ring. It remains in the little protective plastic/cardboard holder that it was delivered in. Whether it’s a $500.00 diamond or a $500,000.00 diamond everyone is looking for the best value. Take your time, look at the certificate (hopefully it’s a Gemological Institute of America report), don’t be influenced by perceived discounts, and most of all shop around. If this diamond is of interest to you please contact us or stop in to have a closer look. For $555.00 we feel it is the best value around. Dealer and trade inquires are always welcome. Stock #e10707.
Not a fan of the circular or oval halo? How about a vintage rectangular style? It’s amazing how a subtle change of shape gives this cluster such a great look. It’s hard to say with 100 accuracy, but we think this purple sapphire ring was made sometime in the 1960s to early 70s. It was manufactured in Toronto by the Corona Jewellery Company. The centrepiece of the cluster is a cushion shaped brilliant cut purple sapphire. There is a fine line between a stone being described as ruby or purple sapphire; both gems are the same mineral called corundum. The only difference is in the colour. Pure red is a ruby, the more purple it becomes the better chance it will be described as a purple sapphire. It wouldn’t be totally incorrect to call this stone a purple ruby either. The centre stone weighs an estimated 1.20 carats according to its measurements. The sapphire is in very good condition, showing only minor signs of wear.
The upper crown facet junctions show abrasions under magnification and there is a minor impact mark on the edge of the table. The 16 round diamonds surrounding the centre are an older style single cut design, they actually showcase 17 facets or “cuts”, not 1. This cutting style is almost never seen in modern jewellery. Almost all diamond cutting factories produce 58 facet brilliant cut stones regardless of how small they are. Single cut diamonds must display excellent cutting geometry and clarity or they look dull and lifeless. Small brilliant cut diamonds conceal flaws that would easily be seen in a single cut. High quality single cut diamonds easily outsparkle an average full cut. The ring was created using popular, hard, and durable 14 karat white gold. The size 7 ring weighs 4.1 grams and can be adjusted up or down by one of our onsite goldsmiths. All the fine claw tips securing the gems are in good condition requiring no attention. This vintage estate ring is estate priced at $2,450.00 CAD. stock #206-00455.
Just because you can’t find it on our website, doesn’t mean we don’t have what you’re looking for. Our ever-changing estate inventory has hundreds of items that never make it online. Rings, pendants, loose diamonds, watches, necklaces, and earrings come and go without making it to our online pages. There just isn’t enough time to showcase everything. I counted at least 20 crosses in stock, many of which are not shown on BillLeBoeufJewellers.com.
This large 9 karat crucifix measures 36mm x 18mm and weighs 3.1 grams. It is in hardly worn condition and is stamped with all the proper English hallmarks. If you’re looking for a different style cross or crucifix please contact us. We’d be happy to text or email you pictures, prices, and descriptions of what we have. The pictured crucifix pendant is estate priced at $175.00 CAD. Stock #e14161.
Gucci link necklace measuring 6.3mm wide and 20 plus inches in overall length (20 1/2″). The puffed links are manufactured from heavy gauge hollow 10 karat gold connected by oval shaped solid links. The chain is in link new condition showing little to no wear in any of the links. It is secured by an easy to use oversized lobster clasp that is connected to the chain by a soldered shut jump-ring.
Many times the loop that connects the clasp to the chain is left unsoldered because this final stage of manufacturing needs to be done by hand. It is nice to see this ring was soldered shut for some added security. The necklace weighs 17.5 grams and is estate priced at $1,980.00 CAD. Stock #431-00444.
For classic looks that stand the test of time (pun intended) you can’t beat a Cartier. More often than not their watch designs will showcase an easy to read, light tone dial with contrasting black Roman numeral hour markers. The Ronde Solo Quartz is not different.
Timekeeping duties have been further simplified by eliminating the seconds hand, just a hour and minute hand tucked down very close to the silver/white dial. The bright blue signature Cartier spinel cabochon crown is another feature you’d expect to see.
At 36mm diameter this watch could be worn by either a man or a woman that likes something a little larger. Its sleek profile and thin bezel make it wear larger than 36mm. Compared to a Rolex of the same diameter, the dial of the Cartier is actually much larger.
Adding some extra interest is an inner 24 hour track, a great feature for those of you who operate in a 24:00 world. This watch is so minimalist it doesn’t even have a calendar display. The sharp sighted will discover the secret signature within the 7:00 o’clock marker.
A super hard synthetic sapphire crystal is gently curved allowing minimum clearance for the hands while maintaining an overall thickness of a remarkable 6.6mm. The watch has been treated to a recent polishing of the case and bracelet. Overall condition is very good, the buckle shows no stretch and very little sag.
The flexible link bracelet is secured by a butterfly buckle that snaps securely shut and blends into the link pattern.
Included with purchase is everything delivered when purchased new at Birks in 2010. There are even a free battery change coupons from BIRKS that we will honor when the time comes to replace the silver oxide cell.
Cartier describe the precision Swiss quartz movement in this watch as a “high autonomy quartz movement” with an expected battery life of approximately 8 years. We always have these high capacity silver oxide cells in stock and can change them while you wait. Comes complete with original Cartier box, booklets, certificates, CD, full compliment of adjustable sizing links, and the free battery change coupon. Including our complimentary one year warranty, our latest estate Cartier is estate priced at $3,700.00 CAD. Stock #501-00361.
Probably one of the most complete Canadian engagement rings available in the retail chain market is the Charmed line. Made from Canadian gold, featuring Canadian diamond centers and hidden Canadian diamond accents within the band and finally designed by Charm’s founder/owner Richard Calder (Canadian). Of course Charm Diamond Centres themselves are a Canadian company. This particular piece from the collection is set with 1.42 carats of SI-GH diamonds, covering over the entire top half of the ring. The center is a Canadian princess cut weighing on its own 0.56ct of SI2-H quality and proudly laser inscribed as proof of its Canadian origins.
Made from 6.6 grams of solidly constructed 14 karat white gold and currently measuring a finger size 7 with limited room to adjust. The ring is accompanied by its original inner and outer box, certificate of authenticity, and CGI Diamond Report with an estimated replacement value of $6,510.00 CAD. The ring is just over 2 years old and looks like brand new. There is no wear showing on any of the claws. Model 1130708 is currently listed on Charm’s website for $5,799.00 CAD. Our estate price $3,479.00 CAD. Stock #e11412.
Prepare to make a statement with today’s white gold diamond bangle, spanning 10mm at its widest.
Manufacturer from 14 karat white gold, this bangle features a striking floral cluster design adorned with 119 round brilliant cut diamonds, collectively weighing 1.75 carats and exhibiting I2-HI quality.
Its sturdy construction ensures both durability and elegance, while the oval shape guarantees that the diamond-encrusted top consistently faces upward during wear, showcasing its brilliance with every movement. The heavily hinged design incorporates a broad button-release box catch, along with two additional side safety locks, ensuring both security and comfort.
The bangle’s original chromy white rhodium finish remains in impeccable condition, testifying to the bracelet’s unworn status. With a weight of 20.9 grams, this bangle, a harmonious blend of sophistication and contemporary design, awaits those who appreciate the allure of timeless glamour. Estate price $3,150.00 CAD. Stock #171-00084.
This Tiffany wedding set came to us empty and it took some time and thought to decide what diamond would go into it. To stay true to our roots we opted to set a diamond that would tell a story. The solitaire engagement ring was actually invented by Charles Lewis Tiffany in 1886. Picture Victorian Era jewellery and what comes to mind? The later part of this timeline was known as The Aesthetic Period and was characterized by opulent gemstone encrusted pieces, accented with heavy engraved patterns, basically, everything was as ornate as possible. And here comes Tiffany with a completely plain and delicate engagement ring that is all high polished metal and one single diamond set proudly atop it.
Surprisingly his design gamble worked, so well in fact that imitations started popping up everywhere and Tiffany’s had to issue warnings to their customers about impostors. It’s consistently been the go-to engagement ring setting for the last 130 years. We chose a 0.50 carat old European cut diamond for this mount as this cutting style was developed around the same time period as Tiffany’s original solitaire design.
In fact, this new “European cut” style was almost as revolutionary, being the result of the thorough study of light refraction within diamonds. Ours is an eye-clean SI1-H and based on its less-than-round outline was probably from this earlier period of old European cutting. Both rings are made from are 950 (95% pure) platinum. The wedding band has United Kingdom hallmarks, so we have to assume this one was purchased in England.
Both measure a finger size 6 1/4 with room to adjust. Estate price for the set only $2,030.00 CAD. A similar style 2.0mm wide wedding ring with a dome profile is a current offering on the Tiffany website where it is priced at $1,250.00 by itself. Stock #101-00047 e13308.
If you’ve never heard of a transition cut you’re not alone. Transition cut is a term that refers to diamonds from the 1920s into the 1940s. It was a time when the world was changing and technology played a larger role in life including a more scientific understanding of how optical physics related to the brilliance of a diamond.
These transition cuts look mostly like old European cut diamonds but have some characteristics similar to a modern brilliant cut. They’re a bit of a hybrid and we love them.
Smaller tables, taller crowns like antique diamonds but with longer lower girdle facets, and thinner pavilion main facets approaching that of modern diamonds. They have a unique look with tons of dispersion and are perfect in original antique rings or settings inspired by antique design.
This diamond came to us in what we’re confident was its original antique platinum filigree setting. The ring was in good repair as the original setting had been re-tipped at some point in the past.
The large centre stone was safe and secure but it showed wear and tear from being continuously worn for close to 100 years. The extremely thin girdle had several significant chips along its edge and several facet junctions displayed minor bruises.

We felt the old diamond deserved to be repaired in order to display its full potential. We knew this meant sacrificing some size and weight to achieve an unblemished appearance. The chipped diamond originally weighed 2.86 carats and measured 9.10mm (average diameter). We were delighted after our master diamond cutter performed his magic and we lost just 7.5% of the original weight and 7.1% of the diameter. The freshly repaired diamond now weighs 2.64 carats and showcases an excellent F colour and very good VS1 clarity.
The girdle edge is thicker now and will be much more resilient to chipping and other damage compared to the original knife edge girdle. The cut of this diamond still displays the antique geometry of the original. A small 54 percent table and steep crown angle of 37 degrees promote more dispersion (breakup of white light into spectral colours) compared to a modern round brilliant with an excellent cut.
A short YouTube video of this beautiful diamond can be seen by clicking here. To see the April 2023 Gemological Institute of America report, click here.
While the diamond was at GIA in New York we decided to spend a little more and have the report number laser engraved in the girdle. This permanent engraving allows the owner peace of mind if the original document is ever lost.
Any diamond of this size and quality is special, but finding a transition cut from the 1930s is extremely rare. We’ve only ever had a couple of these old-cut diamonds of this size and quality pass through our store over the past 65 years. It would be great if the diamond and setting stay together but we’ll leave that up to the next owner as we have the ring priced separately for $1,000.00 CAD.
The platinum ring contains 8 small single-cut diamonds (0.10ct. tw.), weighs 3.7 grams, and measures a finger size of 8 1/2. The repaired diamond will require a thin bezel setting to be used in the original ring due to the slightly smaller diameter. Keep them together or let us create a spectacular new engagement ring or dinner ring for you. Our goldsmiths can produce anything that you can imagine or have seen before. Diamond stock #191-00117.t Setting stock #421-00016.

Viewing by appointment only.
If your significant other is giving you a hard time about your watch collection, let them know there are worse ways to spend your disposable income. Here is more evidence supporting my argument. Our latest estate watch was purchased from us in late 2001 for just $2,250.00, and at $5,190.00 today I think it’s still good value for an entry-level collector Rolex.
This watch is a little unusual because it is an Air-King but it also has a calendar feature. This combination was only available in commonwealth countries like Canada, Australia, etc. All other countries got the Air-King without the date feature.
I believe this is the only automatic watch that Rolex made during this era that had a calendar feature but wasn’t chronometer rated. These 34mm Air-Kings can be worn by men or women on the original stainless steel Oyster bracelet or a leather strap of your colour choice that gives the watch a completely different character.
The Air-King Date features an extremely sturdy and reliable calibre 1520. This 26 jewel automatic winding mechanism was initially developed in 1957 and stayed in service in watches like the no date Submariner until the late 1980s.
A more than 30-year run speaks volumes for reliability. This Air-King has been worn off and on by various owners for over 50 years.
The full length 13 folded link Oyster bracelet should fit almost anyone and is in decent condition. It is showing some dents and dings with some sage but has many decades of useful service life left.
The logo on the buckle is very well worn but still displays some relief. We are happy to supply the next owner of this vintage (and somewhat rare Rolex) with a complimentary 1-year warranty. The watch is estate priced at $5,190.00 CAD. Stock #505-00255.

Crafted with meticulous attention to detail, this 14 karat solid gold pendant carries an impressive weight of 8 grams, making it a substantial and enduring piece. The Chai symbol, meaning “life” or “living” in Hebrew, holds deep cultural significance in Jewish tradition, symbolizing a commitment to a meaningful and vibrant existence. The pendant features an oversized circular bail, enhancing its visual appeal and allowing for versatile styling. Measuring 23.6mm long by 19.7mm wide, this high-polished Chai pendant is not just a piece of jewelry but a powerful emblem of life’s beauty and continuity.
Wear it close to your heart and embrace the profound history and meaning woven into this timeless symbol. Estate price $875.00 CAD. Stock #436-00220.
A colossal crossover style ring and perhaps the largest to pass through our estate department. At 15.75mm wide the ring is certainly digit dominating though the 11mm intersection tones the width down slightly. Despite its intense design the ring’s pallet is a timeless combination of 14 karat white gold, bright white diamonds, and a streak of well matched, high quality blue sapphires. The 38 round brilliant cut diamonds total approximately 1.25 carats of bright SI-GH quality, adding sparkle to the subdued tones of the 9 square cut natural sapphires.
Not surprisingly the ring weighs in at a very substantial 16.8 grams and currently measures a finger size 7 with some room to adjust. The piece is accompanied by a 2010 insurance schedule stating a coverage of $6,374.00. Our estate price for the head turning ring $3,500.00 CAD. Stock #206-00144 e13422.
SOLD
The frosted top half of the 14.9mm wide ring is a perfect example of how powerful a splash of colour can be. The intense azure and cobalt tones of the 6 natural round brilliant cut sapphires turn the ring into something head turning. They’ve been accented with 43 tiny round brilliant cut diamonds that equal a combined 0.25 carats. Those diamonds add a touch of icy sparkle to better set off the sapphire center. The ring itself is in almost unworn condition made from 6.6 grams of premium 18 karat white gold. Currently the finger size measures 6 3/4 with some room to adjust. $1,120.00 CAD. Stock #206-00225 e13013.
SOLD
Almost every green translucent or semi-transparent gem is identified as “jade”. Even jade consists of several different minerals that have values at completely different ends of the spectrum. This beautiful mineral/gem is correctly know as chrysoprase and has nothing in common with jade aside from its beautiful bright apple green hue resembling extremely expensive jadeite.
Chrysoprase is actually a variety of cryptocrystalline quartz, similar to onyx and agate. The lovely green hue occurs as the result of trace amount of nickel held within the gem. It is a fairly hard and tough mineral suitable for jewellery use. This example has been set in a tradition oval cluster design. The vintage ring is made from 14 karat white gold with a delicate gallery and thin shank measuring 2mm wide in a finger size 7.
The domed cabochon cut chrysoprase is surrounded by 18 round brilliant cut diamonds bead set with a scalloped edge. The diamonds are of high VS-H quality and are estimated to weigh approximately 0.75 carats in total. Green is a popular colour again and this ring is a classic design that showcases the colour to its fullest. Our onsite goldsmiths can adjust the size up or down if required. The excellent condition ring is estate priced at $1,890.00 CAD. Stock #206-00415.
Discover a distinguished gents’ 14 karat yellow gold diamond ring that effortlessly blends sophistication with simplicity. Boasting a very bright 0.72 carat round brilliant cut diamond of SI2-GH quality with a good cut, this ring adopts a minimalist and geometric open bar set style, making it a versatile accessory for various occasions. Measuring 8.8mm at its widest and weighing a substantial 10 grams, it exudes a sense of substance and thoughtful craftsmanship.
With a finger size of 10 1/2 and ample room for adjustment, this ring ensures both comfort and customization. The diamond was accurately quality graded in 2008 by GemScan. It is also accompanied by a 2010 Gem Scope appraisal stating a rather optimistic replacement value of $8,150.00.
We feel a more realistic replacement value with new would be $4,500 and our estate price $3,150.00 CAD. Stock #116-00089.
Vera Wang is most famous for tearing down the rigid norms of the wedding dress industry, throwing away the rule book on what a bride should look like on her big day. Her engagement ring line takes a more traditional route, opting for ornate halos signed with two natural blue square-cut sapphires tucked away in the gallery.
This offering from the Peoples Vera Wang collection is crowned with a 0.45 carat princess cut diamonds and shouldered by a pair of pears equalling 0.48 carats. The additional 64 hand set round brilliant cut diamonds bump the total carat weight of the ring to 1.45 carats, all of SI-IJ quality. The 14 karat white gold ring currently measures a finger size 9 1/2 with some room to adjust down a couple of sizes. It’s currently listed on Peoples’ website for $5,999.00 CAD, our estate price for the beautiful ring is $3,600.00 CAD. Stock #101-00318.
When you’ve been around as long as we have and deal extensively in antique jewellery, you tend to acquire many beautiful odds and ends. Sometimes the items that come in have been loved and used for generations. The precious stones they contain can be in perfect condition while the settings that hold them may be totally worn out. When restoration isn’t a viable option, the stones are removed and the metal work is recycled. Every component in this fabulous custom creation was rescued from a worn out piece of jewellery destined for recycling. The exceptional emerald and every single diamond are at least 150 years old, and 100% natural without any artificial enhancements. The step cut emerald measures 6.4mm x 7.0mm and weighs in at 1.10 carats. Unlike modern emeralds that are oiled to improve the apparent clarity, this antique example is 100% treatment free. It’s ultrasonic cleaner safe, the transparency will not be affected even by commercial grade cleaning solutions!
24 antique cushions and round mine cut diamond add 1.74 carats of vintage sparkle unique to this cutting style. The diamonds have all come from our inventory of antique loose stones. They are all very well matched with an average quality grade of SI-I. The beautiful design is a one off custom creation from the creative mind of one of our 4 full time, on staff goldsmiths. Executed in bright white luxurious 18 karat white gold, the size 6 ring weighs in at a substantial 7.1 grams. Despite the beautiful filigree and fine milgrain details, we’re still able to adjust the size to suit your finger (up or down a size or two).
It’s a genuine privilege for Bill Le Boeuf Jewellers to be in a position to be able to offer and produce such an amazing example of our craft. The fact that it contains genuine period correct ingredients (except for the new white gold) is what makes it truly exceptional. Although not inexpensive this ring still represents outstanding value for the estate price of $9,800.00 CAD. Stock #206-00211 e10394.
Step back in time with a vintage treasure from Birks – an antique Art Deco ring, a true testament to the opulence and glamour of the Art Deco period.
Crafted in premium 18 karat white gold, this ring exudes the characteristic geometric shapes and intricate detailing that defined the Art Deco era.
At its center is a dazzling old European cut diamond, boasting VS-G quality and weighing 0.17 carats, encapsulating the elegance of the period. Flanking the diamond are two custom cut triangular deep blue synthetic lab-grown sapphires, adding a touch of color reminiscent of the bold choices in Art Deco jewelry, a time marked by innovative designs and a fascination with luxury. With a petite finger size of 3 1/2 and limited room to size, this ring is a wearable piece of Canadian history, measuring 16.6mm at its widest point.
Estate price $910.00 CAD. Stock #206-00436.
Thankfully traditional Japanese Geisha has an extremely distinct hairstyle or we wouldn’t know how to begin telling the story of this handmade necklace. The statement necklace begins with a 24.3mm long by 20.9mm carved bust of a Geisha in the traditional Nihonga style you see on classical Japanese scroll paintings. Except of course that her eyes are diamonds. The pair of well-matched round brilliant cut diamonds peer out of the warm 14 karat yellow gold, creating a striking contrast. Hanging from this bust is a 25.5mm long by 26mm heart topped with a 0.92 carat round brilliant cut diamond of I1-HI quality.
That diamond has undergone a treatment called laser drilling, a permanent clarity enhancement employed to improve the overall appearance of a diamond. A microscopic laser beam is used to drill through the diamond to reach a dark inclusion, acid is then forced into that hole, burning away the inclusion and leaving a colourless empty cavity in its place. The laser drill hole can be seen in this photomicrograph reaching a crystal inclusion.
The real story of this piece is the almost shield-shaped octagonal kunzite at the center of the heart. The rarely encountered gem was discovered in the very early 1900s and named for Tiffany’s legendary gemologist and gem buyer George Frederick Kunz. The gem is prized for its pastel pink colour which features the faintest hint of lilac purple. The estimated 22 carat kunzite (we feel the actual weight is closer to 18 carats) features two rows of eye-visible reflective inclusions that run at almost a 90-degree angle to the gem’s crown, making them less visible head-on and more visible viewed from the side. The high-polished gold sheet that makes up the heart has been equipped with a tapered wire gallery to ensure it sits properly during wear.
Attached to the pendant is a 1.9mm wide snake chain measuring almost 30 inches long.
It comes equipped with a sturdy lobster clasp but you’ll hardly need to use it as the necklace slips easily over the head. The entire 14 karat piece weighs in at 36.2 grams and is accompanied by a Harold Weinstein LTD. appraisal stating an estimated value of $13,500.00. Our estate price for this one-of-a-kind art piece is estate priced for $6,600.00 CAD. Stock #231-00180.

Quartz is a very common that can be found throughout the world. Brown quartz is often described as smoky quartz. Sometimes the hue is less saturated and more in the yellow range of the spectrum. Purple quartz is known as amethyst. When amethyst undergoes heat treatment it turns into citrine (orange quartz). Almost all citrine was originally amethyst that’s undergone heat treatment to permanently change its colour. Like any other heat-treated gemstone the outcome is not completely controllable, every gem has a colour hidden inside of it so you never know what you’ll get from heat treatment.
Our large quartz specimens are medium brown and a very pale yellow so soft it almost appears to be the gemstone equivalent of the 10-karat gold that surrounds it. As quartz forms in large crystals, it’s not terribly surprising to find massive gems from this family, but this pair of jumbo gems are only part of a small handful we’ve ever had in store.
This pair weighs approximately 146 carats and 97 carats. With their massive size, you can actually spot some subtle colour banding in both of them. In the larger brown quartz, there are three bands running in an X formation just south of the dead center, you need to tilt the gem in several directions to spot all of them. The soft gold tone gem has a diagonal striation of possibly purple mirage lines, to see them you have to tilt the gem just so, they transition from sharp lines to invisible very quickly. The larger is in a standard basket setting (handmade of course) and the smaller one has a more decorative frame.
Both feature heavy oversized bails that should slip over most chains.
The estate price for these massive talismans is $1,980.00 each CAD. Stock numbers 231-00203 and 231-00202 (SOLD).
FOPE has an almost century-long history of high-quality jewellery manufacturing behind its name. The brand began in 1929 as a small jewellery manufacturing shop with 20 employees. They expanded multiple times over the decades, and in the 1980s developed a specialized gold mesh that would become the iconic feature of their brand. The Novecento mesh is made from an interlocking connection of the individual links that make up the necklace and bracelet we are featuring today. The set is certainly interesting for more reasons than its links, the station-style pieces feature freely swinging diamond studded drops.
The 7.5-inch long bracelet spaces its 5 diamonds evenly across the wrist and the 16.5 inch long necklace focuses its 7 diamonds across the collarbone. The petite VS-FG round brilliant cut diamonds equal 0.15 carats together. Both the chain and bracelet are equipped with a stylized lobster clasp stamped proudly with its FOPE origins.
Being made by one of Italy’s most luxurious manufacturers pretty much ensures the pieces would be made from top-quality 18 karat white gold. Both pieces are in like-new condition, retaining their original chromy white rhodium finishes. They are accompanied by their original FOPE cloth lines box. The estate price for the set only is $6,000.00 CAD. Stock #161-00147
This neckpiece is a stunning homage to the Art Nouveau movement of the late 1800s. The goldsmith who crafted it used traditional metalsmithing techniques to handmake each individual component. From delicate filigree to chased and repoussed leaves, the necklace is a masterpiece!
The piece also combines premium 18 karat yellow, white, and rose coloured golds to add even more depth to the design. The centrepiece is a 9.00-carat pear shaped amethyst that measures 19.7mm x 10.9mm.
The piece weighs in at 20.9 grams and features an adjustable length chain. Estate price for this one-of-a-kind neckpiece is $3,080.00 CAD. Stock #e14454.
The Tiffany brand is arguably the most influential in the jewellery industry. They have a reputation of premium quality with a price reflecting attention to every detail with uncompromising standards. They don’t rely on outside grading services like the Gemological Institute of America to confirm the quality of their diamonds. When it comes to diamond quality, Tiffany’s minimum quality standards are very good on paper and exceptional in person. When the GIA introduced a standardized diamond grading system, Tiffany was celebrating their 116th anniversary and doing quite well without GIA confirming what they already knew. Although Tiffany now uses GIA’s internationally accepted system for describing diamonds quality, their conservative reputation for excellence doesn’t require a fact check through outside independent report suppliers. Tiffany marches to the beat of their own drum, choosing to set the trends, rather than follow them. In fact, Tiffany’s laser inscription would actually be considered a blemish by the GIA as they engrave the unique registered number on a star facet instead of concealing a number on the girdle like everyone else.
Not to say that it is distracting, it is almost impossible to find with 10X magnification, and you can only read the serial number under 60X. Tiffany’s grading is certainly to the high standards or better of those established by the GIA, and their documents are just as thorough. The elegant Tiffany & Co. Diamond Certificate that accompanies this ring states 1.11 carat weight, VS2 clarity, H colour, faint fluorescence, excellent cut, excellent symmetry, excellent polish all illustrated along with the stone geometry.
Enclosed in the robins’ egg blue portfolio shows the purchase price of $20,700.00 plus sales tax, full lifetime warranty, and insurance appraisal valuation in duplicate. It’s hard to dispute the $20,700.00 purchase price paid when you are arguing against anything that comes in that little satin-lined box.
The iconic six prong egagement ring is probably the most copied solitaire on the market. Costco lost a lawsuit from Tiffany for selling generic diamond engagement rings bearing the “Tiffany” name that cost them 21 million dollars. Our 4.5 grams platinum example measures a finger size 4 1/2 with plenty of room to adjust as needed.
It was purchased from the Tiffany boutique Toronto in February 2021 but never worn. It remains in perfect as delivered condition. Everything is original, complete, and in perfect condition, as delivered from T & Co. The ring even comes with the silk handle Tiffany shopping bag, documents, and books. The complete kit is estate priced at $14,490.00 CAD. Stock #101-00340


We’re always happy to showcase a Tacori piece, and have had the opportunity to do so several times, but this is the first time we’ve had one that was completely unworn; in fact, it came in with its out-of-the-showcase cubic zirconia center stone. We of course have hundreds of diamonds patiently awaiting their “forever home” so we popped out that CZ and replaced it with a diamond from an out-of-date mounting.
The 0.97 carat round brilliant cut is a lovely VS2-H quality and is accompanied by a Gemtech certificate detailing the ring that originally housed it.
Now it crowns a Tacori Ribbon model 2573 SM RD in all its glory. The ring is detailed with 34 tiny round brilliant cut diamonds of high VS-GH quality, equalling 0.12 carat together.
The 18 karat white gold ring retains its untouched chromy white rhodium plating and currently measures a finger size 6 1/2 with some room to adjust.
The ring is accompanied by its Tacori certificate of authenticity and original inner and outer box. The estate price for the like-new ring is $7,350.00 CAD. Stock #101-00439.
“1 carat has a nice ring to it”. It’s a great slogan that respected local jeweller D.C. Taylor has been using in recent marketing. This ring was supplied brand new by D.C. Taylor Jewellers in 2014. It contains 34 tiny round brilliant diamonds that total 0.27 carats of VS-GH quality. The centre diamond is calculated to weigh in a 0.73 carat resulting in that nice tidy figure of 1.00-carat total weight. The centre diamond measures 5.75mm diameter showing good finger presence; especially when framed in the rose gold diamond set halo. The very good cut centre gives lots of sparkle and twinkle; you’d never guess the clarity is an I1. Its grade setting crystal inclusion goes unnoticed except under extreme scrutiny and then only by those with super sharp close up vision. With lots of artificial magnification under darkfield illumination, this photomicrograph reveals the inclusion with relative ease.
As Gemologists and certified diamond graders, we love teaching clients how the various aspects of diamond quality affect pricing. We have the knowledge and the tools to show you all the characteristics that are important and the ones that make little difference in typical viewing conditions. The 3.6 gram 18 karat white and rose gold ring is in like new condition. Simon G designer ring model number MR1894-D has a suggested retail price of $2418.00 CAD not including a centre stone.
A complimentary sizing by one of our onsite goldsmiths and rhodium plating will have the ring looking brand new. When it comes time for the wedding ring, Simon G has one ready to go. The flat edge and raised halo make alternative wedding ring options plentiful. Included with the purchase is an appraisal supplied by D.C. Taylor Jewellers suggesting a replacement value of $7,970.00 CAD plus tax. While it lasts our estate price for the designer ring from Glendale California is priced at just $3,500.00 CAD. Stock #e11457.
Kabana is a luxury manufacturer of fine jewellery that specializes in the inlay of precious and semiprecious gems. Mother of pearl, colourful opal, black onyx, turquoise, lapis, and many other gems are hand shaped to fit the intricate styles inspired from traditional and modern design. There are few manufacturers with more recognizable jewellery than Kabana. They have dozens of retail agents in the United States, and you’ll run into more on popular vacation island destinations, like Bermuda, Jamaica, Cayman Islands, Aruba, etc. The jewellery they produce is all hand crafted in the United States with great precision. Jewellery like this requires much more hand adjustment of the stones because inlaid stones must fit tight like a puzzle piece. Prong set jewellery allows the metal to be manipulated around a stone, inlay requires the stone to precisely fit and existing gold structure. We’ve had a few Kabana items over the years, but this is our first from their Sealife collection. The choice of beautiful green malachite is perfect for the large sea turtle pedant that measures 33.8mm from nose to tail.
The 13 inlay sections of cabochon cut malachite display excellent polish and subtle bands of green shading the mineral is known for. This is a substantial pendant weighing 13 grams. The large bail on the underside can accommodate anything from a light gold chain to a heavy leather cord necklace. We don’t think this cute turtle was worn more than a few times. We didn’t even need to refinish the 14 karat yellow gold when it arrived, it still retains the original factory applied bright polish to all the gold surfaces. The realistic sea turtle depiction continues on the underside making for not only a beautiful piece of jewellery but and an interesting object simply just to look it and hold.
From surfing around the Kabana website it appears they no longer produce the large turtle pendant, although a couple smaller versions using other gem material are still shown. Some Kabana retail partners still have the large examples with mother of pearl inlay for $2,279.00 USD ($3,100.00 CAD). We couldn’t find a single example of this version with malachite anywhere online. This unique pendant is estate priced at $1,860.00 CAD. Stock #231-00276.
SOLD

We are adding bright green to our list of impossible-to-photograph gemstone colours! These almost olive coloured images are meant to depict the intense glowing green of high peridot. This trio represents some of the best colours of peridot we’ve had the pleasure of showcasing. Like all high-quality peridot, these 5 gems seem to be lit from within. The 4.37 carat peridot in the ring is the most interesting from a gemological standpoint as it features an inclusion that can only be found in peridot: the lilypad. These inclusions are so special (and frankly mesmerizing to look at) that their presence doesn’t normally affect the value of the gemstone. What’s extra special about this lilypad is its size, the inclusion spans almost the entire diameter of the gem and is clearly visible without magnification.
Like most lilypads, it features reflective spangles that catch the light in different ways as you move the ring. The earrings and pendant also feature lilypads but they are small and can only be found with high magnification. What they are all free of are the black carbon inclusions that are highly detrimental to peridot value. The antique necklace, earring, ring set is made from 14 karat white gold with the ring and necklace featuring delicate millgrain and engraved patterns. The stud earrings are equipped with large heavy friction backs to ensure a comfortable and secure fit for the 7.6mm wide gems they carry.
The necklace measures 17 inches long and is equipped with an antique spring-ring catch. The ring currently measures a finger size 5 1/2 with some room to adjust. Together the set contains 20.35 carats total weight of high-quality peridot, with those in the ring and the necklace showing some signs of wear, not surprising considering the slightly soft nature of peridot; worn with care the set could last another 100 years. The estate price for the necklace is $2,800.00 CAD, for the ring $1,260.00 CAD, and for the studs $980.00 CAD. Stock numbers 231-00136, 206-00258, and 211-00062 respectively.
Earrings have been sold.
Well over 1 million members located in over 100 countries around the world make up the Harley owners group. The membership organizes many ride related rallies that often raise money for various charities including their official cause of Muscular Dystrophy. Almost every community that has a Harley Davidson Motorcycle dealership also has a H.O.G. chapter sponsored by the dealership. I’m sure some of our customers wouldn’t mind having a little pendant like this one. It could be added to a charm bracelet or perhaps to the key ring of your favorite ride. The pendant looks like new, cast from over 2.4 grams of 10 karat gold, measuring 19.2mm x 13.5mm. The back of the pendant has a flat finish that could be engraved with your motorcycles serial number or a special message. The high quality pendant shows great detail. A Sandblasted background with polished highlights and frame provide excellent contrast. Estate price $175.00 CAD. Stock #436-00119 e8737.
SOLD
Ruby is the traditional gem given as a gift for a 40th anniversary or birthday. It is also the birthstone for July and occasionally occurs in one of the gem world’s most vibrant hues of red. High quality rubies are far rarer than diamonds and are seldom seen in large sizes. In a recent July 2022 Hong Kong auction a beautiful 8.39 carat Burmese ruby in a Cartier diamond ring sold for $7,300,000.00 USD. While the rubies in this ring are nowhere near that size, they are very bright and of very nice quality. When we first saw them we figured they were synthetic. After some microscopic examination, we determined they are all of natural origin. The 7 rubies measure 3.2mm in diameter and weigh approximately 0.14 carat each (1.00 carat in total). This ring was custom made approximately 40 years ago and was enjoyed and worn every day by its previous owner. As such, the colourful red rubies have acquired some chips and scratches to their crown facets. The centre diamond is of a high quality VS clarity with white H colour and in perfect condition. Based on diameter and depth dimensions we’ve calculated the diamond to weigh 0.65 carats.
This custom-made dome setting has been crafted from a substantial amount of 14 karat yellow and weight gold with a gross weight of 12.6 grams. This isn’t a large ring for a gentleman as it measures around 8 1/4. It should come close to fitting the pinky finger for the average size man. We can easily make it a little smaller for a lady or larger for a man’s ring finger. Coloured stone rings are uncommon to find in men’s designs. This classic style is often seen showcasing a single diamond or cluster, but this is the first we’ve seen with rubies and diamond. The 7 claws that hold the centre diamond are in excellent condition and should provide the new owner with decades of security. This high-quality and unique ring is estate priced at $3,290.00 CAD. Stock #206-00330.
Over 60 years ago when our business was founded there were a plethora of healthy Canadian jewellery manufacturers. As with other manufacturing industries some of these companies crumbled in the last three decades as the market became more and more competitive. Inexpensive labor in developing countries reduced production costs and gave importing companies an edge that many Canadian manufacturers/wholesalers couldn’t compete with. Some survived by increasing their quality and focusing on customer service. This allowed a few them to stand above what importers were producing, justifying the cost difference. One manufacturer we deal with also started to tout their Canadian nature, producing all of their jewellery using Canadian gold and often featuring Canadian diamonds. This three stone ring is one of theirs and we are happy to showcase it here. The 0.75 carats in this example are not certified Canadian in origin but the 14 karat white gold is. Their I1-I quality works well at this size, the inclusions are not noticeable and they offer a great deal of clean space that shines brightly. This little piece of Canadian gold is estate priced for $1,120.00 CAD. Stock #101-00186 e12328.
The Tag Heuer 4000 series was built like no other Tag before or since. This was a model that is often overlooked but is worth considering; it was well ahead of its time when it debuted more than 30 years ago. Despite the low profile of just over 10mm, this is one tough watch. It has solid bracelet end pieces instead of hollow stamped sections. The solid ends are secured by solid bushed rivets, not hollow spring bars like most watches.
Its solid stainless steel links are secured by more rivets, not split pins as found on other Tag Heuer watches from the same period. Even the folding/locking buckle is made from heavier gauge steel while still offering a diver’s extension.
The coloured Tag Heuer logo splits down its middle when the bezel timer is rotated is a quirky feature exclusive to the 4000 series.
The original tritium hands and hour makers are fully intact showing almost no patina or discolouration. This is a curious and rare white dial automatic version. It is somewhat usual in the fact the hour markers don’t have a contrasting metal or coloured frame around the once luminous tritium plot.
This gives the hour makers an inconspicuous appearance that is somewhat at odds with a sporty diver’s watch.
A hardened synthetic crystal also in perfect condition offers excellent optics on or off-axis. We serviced the Swiss-made automatic winding movement in April 2023. An electronic report shows the watch is running well within accuracy expectations.
Also included is a vacuum and pressure testing report to a depth of 10 atmospheres (300 feet). One-way timer bezel, screw-down crown/case back are features you’d expect for a sporting Tag Heuer and the 4000 has them. The original sandblasted finish has held up very well and looks completely original. If you want a tough Tag Heuer that is different than the common 2000/AquaRacer series this rare 4000 is a model you’re not likely to encounter and certainly not in this sort of condition. Including a complimentary 1-year Bill Le Boeuf Jewellers warranty. Estate priced at $1,200.00 CAD. Stock #520-00104.
Today are showcasing the Tiffany Soleste Round Brilliant Double Halo Engagement Ring with extremely rare and costly natural pink diamonds in set in rose gold and platinum.
Our petite model measures 8.35mm across, featuring a significantly smaller center diamond than the version currently featured on Tiffany’s website; but it’s still the extremely high quality Tiffany’s is prized for.
The ring also features a dazzling halo of chic natural fancy pink diamonds surrounded and shouldered by white diamonds, bumping the total carat weight of the ring up to 0.60 carats. The 3.5 gram ring currently measures a finger size 5 with some room to adjust.
It’s accompanied by its original black box and a 2014 receipt showing a purchase price of $5,800.00. We have this excellent condition Tiffany estate priced $4,500.0 CAD. Stock #101-00534.

Without question, this is one of our favorite rings. The setting is Canadian made from 3.6 grams of 14 karat white gold. It’s a brand new creation inspired by those wonderful Art Deco designs of the 1920s and 30s. Geometric details with fine filigree and milgrain are distinctive features of the Art Deco style. This new construction setting has been here for a while just waiting to showcase the ideal centre diamond to turn up in our estate department.
Last month a beautiful 0.90 carat round brilliant diamond came in that fit the setting perfectly. It was already in a ring that had seen at least 50 years worth of wear and tear. As such the original shank was a little thinner than we were comfortable with and the gallery sides were worn from rubbing against another ring for many years.
There’s nothing we like better then taking old components and reinventing them into something brand new for our customers. Reusing larger diamonds like this saves our savvy customers a lot of money compared to purchasing new. You can also feel good knowing the gold from the original setting will be recycled, adding to the world’s supply without disturbing any new ground.
The freshly set diamond fits totally flush in the octagon shaped inner setting. 8 small protected claws secure the very good cut centre diamond means this ring should be maintenance free for decades to come.
The main 0.90 carat diamond measures 6.2mm x 3.7mm and is of solid SI1 clarity. The grade setting clarity characteristic is a small white feather located just the the right of the 12:00 o’clock position close to the edge.
As observed with our Gemological Institute of America master diamonds its colour was determined to be a very nice G. Two additional round brilliant cut diamonds of very good SI-H quality provide 0.27 carats of extra bling on the shoulders. If you love this setting as much as we do and already have a diamond, it’s available to hold your diamond for $1,600.00. We welcome your trades should if you’d like to upgrade to this or something else. This new/estate combination ring is priced complete at $5,600.00 CAD. Stock #e12256.
As jewellers, gemologists, goldsmiths, and designers, we celebrate the imperfections of Mother Nature. This would be a pretty boring profession if the only thing we were dealing with were perfect gems that were all cookie cutter examples of each other, where the last one was exactly the same as the next one. Natural flaws and imperfections spawn human creativity and inspiration, leading to innovative designs and new opportunities to feature something new. From a purely technical perspective there is absolutely nothing perfect about this antique diamond, but we love it none the less. It was cut well over 100 years ago when the science of optics and the physics of light was in its infancy. Trial and error produced the evolution of this style of cut. It lacks the precise geometry of a perfectly cut modern round brilliant cut diamond but it shares all the key cutting details of a new diamond. It has the exact same number and position of facets on both the top and the bottom.
All the rudimentary facet shapes are there, they only need to be manipulated in proportion to become a perfectly cut modern diamond the same as the next one. The clarity has numerous feathers and crystals leading us to grade it an I2, although you may feel it looks better (especially in person) with its relatively clear centre section. The colour we have determined to be in the KL range but not the typical yellow to brown hue but more of an uncommon very slight grey tint. The cut and symmetry by modern standards is fair at best but that doesn’t mean it lacks brilliance and dispersion. Considering the age and generous weight of well over 2 carats this is a truly rare example of an antique diamond. Lab-grown diamonds are all the rage these days and are definitely an easy way out. If you don’t want to have a lot of skin in the game, our price for high quality lab-grown diamonds is close to 98% less than a natural diamond of the same quality. This image is of a currently available (January 6, 2025) 2.15 carat, VVS2-H, lab-grown diamond with an excellent cut, symmetry, polish, and no fluorescence, priced at $470.00 USD.
We can order this diamond, or dozens exactly the same for less than $500.00 USD plus shipping. Don’t be fooled, you don’t have to pay many thousands for lab-grown diamonds if you source them through competitive independent jewellers like us. Is this lab-grown diamond better than our estate antique natural diamond? Yes it is, but as a modern example of technology it leaves us cold and lacking emotion. It isn’t unique and its residual value is the same as any modern piece of mass produced technology. Our natural diamond from the mid 1800s has an outside diameter of 8mm (on average) and would make a great statement as the major component in an engagement ring or maybe a beautiful pendant. Our talented goldsmith/designers can create anything you can imagine or have seen before. We’ve set it into this contemporary estate ring by Canadian designer Noam Carver.
This ring set was purchased from Bill Le Boeuf Jewellers around 7 years ago. The original owner decided to reset her diamond into a different Noam Carver in yellow gold for a change of look. She traded the original set in and now they are available for more than 55% off their replacement value. They are ready to got with this 2.10 carat diamond or we can set your diamond in it. The ring set is 18 karat white gold and contains 45 small brilliant cut diamonds with a total weight of 0.63 carats and of SI-GH quality. The size 6 ring set (model number B022) is priced separately for $3,075.00 CAD, stock #141-00034. The centre estate diamond is priced at $7,000.00 CAD. Stock #191-00183.

Lab-grown diamonds have been inexpensive alternatives to natural diamonds for several years now. As personal relationships change, we are starting to see lab-grown diamonds return to the market as preowned engagement rings and other pieces of jewellery. The owners of lab-grown diamond jewellery are surprised and sometimes shocked to learn that lab-grown diamonds are worth next to nothing on the secondary market. The price of these created stones continues to drop as the technology used to make them matures and becomes ever more efficient.
Many stores selling lab-grown diamonds take advantage of generous markups but do not buy back their jewellery, leaving the original consumer the task of selling the jewellery privately. This 14 karat white gold Noam Carver engagement ring (model #B264-01A) is only a few years old and is still a current offering on their website. Including 44 small natural diamonds of SI-GH quality it carries a retail price of $2,355.00 USD (not including a centre stone). Bill Le Boeuf Jewellers have been exclusive Noam Carver dealers for the Barrie area for many years. The award winning Montreal based designer produces some of the industries most popular designs. They offer a lifetime warranty on their rings including complimentary sizing. This lifetime warranty does not cover the centre stone or regular wear and tear.
The oval lab-grown diamond in this ring is of exceptional quality. The International Gemological Institute (IGI) report in comes with describes the diamond of VVS2 clarity, E colour, excellent polish, excellent symmetry, very good proportions, and no fluorescence.
Looking at the same or better quality lab-grown diamonds on our database shows a retail price is only around $220.00 USD!!!! That’s right, the current replacement value of this diamond is just $220.00 USD for the same quality IGI graded lab-grown diamond.
If you’re considering the purchase of any lab-grown diamond we urge to shop around for the best value. We’ve seen well over a 500% difference in price for the same lag-grown diamonds depending where you but them. A competitive independent jeweller can save you thousands on the purchase of a lab-grown diamond, we do it almost every day for our customers. This estate Noam Carver ring is decorated with accent diamonds running down both shoulders and on the gallery setting.
It measures a smallish size 5 but can be made a little larger. It comes complete with its lifetime warranty card showing the ring’s unique serial number. The ring displays a couple years of wear but can easily be refinished to look like new. We’ve decided to leave it original and will polish and rhodium plate it as required for the next owner. The complete ring is estate priced at just $2,000.00 CAD. Stock #101-00522.
This diamond came in with an Amsterdam diamond report declaring the diamond “loupe clean of river colour”. These old terms refer to flawless clarity with perfect colour. Hoping for a similar opinion from the Gemological Institute of America the diamond was sent to New York for a more internationally accepted opinion. The results came back with a VVS1 clarity with an E colour. Both characteristics are just 1 grade off perfect. Fewer than 4% of diamonds receive a quality grade like this or better. The added length of a fancy shaped marquise makes them look bigger than an ordinary round diamond. The actual dimensions of 10.32mm x 5.62mm x 3.73 make for an impressive display. GIA report #2165031879 describes the symmetry and polish as very good. The diamond also will exhibit strong blue fluorescence when exposed to long-wave ultra violet light. The Estate price is $15,500.00, CAD. Stock #e8067.
The diamond is currently mounted in an 18 karat yellow gold setting with baguette cut diamonds available separately. Stock #e8067
Diamond sold, setting still available.

The origin of the wedding cake dates all the way back to Ancient Rome. It has seen many transitions over the centuries but the history of the wedding cake as we know it comes from the 1600s bride’s pie. Sugar was a sparse luxury so the pie was usually of the savory meat variety with rings hidden inside. A superstition arose that the women who received a piece of pie with a ring would be the next to marry. That tradition was eventually swapped for the throwing of the bouquet. The wedding cake evolved into a multi-tiered dessert thanks to Royal weddings and new sources of white sugar. The symbolism of the cake itself also evolved from an omen of fertility to one of good luck and a long union. The current popularity of cupcakes and dessert bars have almost replaced the standard tiered wedding cake. Most couples still hold to tradition with a small, personalized cake to cut and share between themselves. I doubt Tiffany’s silversmiths had this coming trend in mind when they made this solid sterling silver cake stand in the 1940s.
At 9 1/2 inches diameter the raised platter is on-point for wedding cupcakes or a personal couples cake. It’s all timeless elegance with an Art Deco inspired pierced trim and pedestal base.
The tray weighs a solid 543 grams making it a stable base to use with the matching Tiffany & Co. Audubon sterling silver serving set! The handles of both the knife and server are artfully chased with reeds and flowers on their backs and a pair of playful love bird parrots on their fronts. They come in their original blue pouches, black case, and outer Tiffany & Co. box and both are currently available on Tiffany’s website for $480.00 and $480.00 respectively.
All three pieces of this unique wedding cake set have room for some personalized engraving. Keep it small and you can start a family tradition to be passed down and added to for generations! The serving set is estate priced for $550.00 CAD and the tray for $1,000.00 CAD. Stock numbers E12233 and E12234. It would have been a sad thing to photograph a cake set without any cake! We would like to thank Cakes By Design for their impromptu custom Tiffany blue cupcakes! Cakes By Design are a fantastic Barrie business located in the south end at 12 Commerce Park.
If you’re looking for a unique, custom made, delicious dessert to mark your big day give them a call. The platter and serving set are available separately or together for the estate price of $1,550.00 CAD. Stock numbers e12233 & e12234.
Cake stand sold.
The Tag Heuer 4000 series was built like no other Tag before or since. This is a model that is often overlooked but is worth considering if you ever see one. It was well ahead of its time when it debuted close to 35 years ago. Despite the low profile of just 8.6mm, this is one tough watch.
It has solid bracelet end pieces instead of hollow stamped sections.
The solid ends are secured by solid bushed rivets, not hollow spring bars like most watches. Its solid stainless steel links are secured by more rivets, not split pins as found on other Tag Heuer watches from the same period. Even the folding/locking buckle is made from heavier gauge steel while still offering a diver’s extension.
The full length 18 link bracelet shows almost no sag and zero stretch. The coloured Tag Heuer logo splits down its middle when the bezel timer is rotated, this quirky feature unique to the 4000 series.
The original tritium hands and hour makers are fully intact showing no patina or discolouration. The tritium pigment still offers a bit of luminous qualities but is pretty much worn out after more than 30 years of continuous glowing. This is a remarkable example of a seldom encountered model. It measures a modest 34mm diameter and is suitable for a gentleman with a slim wrist or a lady. This picture is showing its size compared the popular 36mm Rolex Datejust.
It is in very good to excellent condition and remains 100% original and unpolished. Even the original screw-down crown is in excellent condition requiring one and a half full turns before popping out.
The sandblasted finish is fully intact with no sections of gold plating wearing thin. The classy champagne dial is perfect and blemish free. A high precision Swiss quartz movement inside the 200 meter water-resistant case is running strong and keeping great time. The 7 jewel ETA calibre 955.412 is equipped with a 31 day calendar and a low battery voltage warning system.
Finding any decent condition Tag Heuer 4000 is difficult, finding one with original inner/outer boxes, instructions, fully endorsed warranty card, and the original bill of sale is practically unheard of. The watch was purchased in Toronto Oct. 31, 1995 at E.H. Penny’s Fine Jewellery for $1,260.00 plus sales tax. Including our 1-year complimentary warranty this rare watch is estate price is $1,200.00 CAD. Stock #520-00143.

An engagement ring that focuses on clean lines for a modern feel. The princess cut diamond that crowns the ring has been set with pronounced corner prongs that mirror the narrow channel edges. The diamond itself is a bright and sparkly 0.56 carat of I1-H quality that faces up far better than you would imagine. It’s shouldered by 24 petite round brilliant cut diamonds of the same quality, who add an extra 0.19 carats to the ring, bringing the total diamond weight to 0.75 carats. The 2.9-gram ring is made from 14 karat white gold and currently measures a finger size 6 1/4 with a bit of room to adjust. Estate price $1,400.00 CAD. Stock #e13922.
Diamonds are by far the hardest of all gemstones. In fact, they are 200 times harder than the second hardest gem, but that doesn’t mean you can’t chip or break them. Much the same as wood has a grain, diamonds have directional hardness and cleavage planes. If impacted with enough force in the right direction, diamonds can be damaged. While this isn’t common we do see it from time to time. Diamonds of promotional quality with significant surface breaking inclusions are more prone to damage than higher clarity diamonds. When this estate diamond arrived to us it weighed 0.99 carats but wasn’t well cut and had a significant chip that extended into the stone.
We knew it had potential, but it would come at the expense of significant weight loss. By the time our master diamond cutter repaired the stone, almost half its original weight was lost. Its diameter went from 6.25mm to 5.05mm with a resulting weight of 0.51 carats.
As this diamond has been entirely remanufactured, it is now in perfect condition with a very good to excellent overall cut, a strong SI2 clarity, H colour, and showing no fluorescence. The grade setting inclusions are small white crystals that are invisible to the naked eye. This diamond comes with a cut report detailing all of the diamond’s geometry.
This beautiful stone could be used in any creation, from a simple solitaire pendant or ring to half of a pair of stud earrings. Freshly cut and estate priced at just $1,000.00 CAD. Stock number 191-00103.
Admittedly, the metaphysical world is new to us, but we saw this piece and knew it was more than it seemed. We’ve never encountered a winged dolphin before, but with a bit of research, it seems these creatures are from the world of dream symbolism. If a flying dolphin (not necessarily winged) appears in your dream it could be a sign that you are starting a new stage in your life.
They are a reminder of self-discipline. Ours features diamond eyes and is jumping over an intensely saturated violet/blue natural tanzanite weighing approximately 1.00 carat. The jury is out on exactly what tanzanite represents, but some of its listed symbolism are self-awakening, transformation, and wisdom. But the real focus of the piece is a rough crystal golden beryl, also known as the sunshine stone.
The 38mm long by 14mm wide six-sided crystal features a collection of fine needle-like inclusions within its top half. Across the back of the crystal, an interior refraction plane captures a rainbow in its depths. The gem symbolizes confidence and motivation. The intricately carved wings of the dolphin also feature a row of round brilliant cut diamonds, bringing the total up to an estimated weight of 0.18 carats of bright VS-G quality.
Attached to the pendant is a 2mm thick foxtail chain measuring a total length of 23.6 inches, ending in a heavy lobster clasp. The entire 14 karat necklace weighs in at 42 grams and is accompanied by a May 2018 Harold Weinstein LTD. appraisal stating an estimated value of $6,500.00 CAD. Our estate price for this one-of-a-kind handmade piece is $3,150.00 CAD. Stock #231-00182.
This engagement ring is about as Canadian as you can get; made from 3.70 grams of 14 karat Canadian white gold by Corona, a Canadian manufacturer, and containing a Canadian diamond. Not just any Canadian diamond either, this 0.44 carat princess cut was mined from the Ekati mine in the Northwest Territories and is a brilliant VS1 clarity in a white G colour. It’s been certified Canadian and laser inscribed with a maple leaf logo, the Canada Mark logo, and serial number CMBE-203227. The ring itself is a very sturdy take on the classic solitaire style engagement ring and should make even the most cautious wearer feel comfortable. Currently measuring a finger size 6 1/2 with the capacity to be sized to nearly anything the ring is freshly polished and ready to go. Estate price $1,736.00 CAD. Stock #e9617.
This is a large and heavy pendant measuring just under 6cm in height weighing 17.7 grams. The yellow and white gold design appears hand made and tests approximately 14 karat gold. The large hinged bail is big enough to hold all but the heaviest chain you may have. 36 round brilliant cut diamonds decorate the centre and have an estimated total weight of 0.50 carats with a average quality of I1-J. Estate priced at $1,680.00 CAD. Stock #436-00023 e7850 .
If you’re secretly in love with popular halo designs but still want to put your own stamp on it, how about doing it in pink gold? Of the numerous halo designs we’ve done over the years I’d estimate more than 90% are made of white gold or platinum with the occasional one done in a more traditional yellow gold. This 14 karat rose/pink gold creation makes it little different than most. The 3.3 gram setting has a tight 9.5mm diameter halo assembled with 16 sparkling SI2-HI round brilliant cut diamonds. Secured nice and low in the ring is a 0.71 carat SI1 clarity, H colour round brilliant cut diamond measuring a full 5.9mm in diameter.
There are 16 additional bead set round diamonds on the shoulders giving the ring a fully dressed look.
The flat edge of this style ring makes matching it up with an anniversary or wedding ring. This ring comes with a June 2019 appraisal from Caribbean Gems describing the ring and the diamonds. The document suggests a retail value of $3,499.00 USD.
In the five and a half years since this ring was purchased the price of gold has more than doubled, natural diamonds like this one have lost a little value and the Canadian dollar is worth about 20% less, making this ring more expensive (at least in Canadian dollars) today than is was back in 2019. The size 6 1/2 ring is in like new condition showing no wear and tear. If you need the size adjusted, one of our onsite goldsmiths can handle the job in just a few days.
Take advantage of our large collection of estate diamonds. Start with a great value estate diamond and we’ll put it in a brand new production ring like this or let us custom make the ring of your dreams. You get unmatched savings using high quality natural estate diamonds and the satisfaction of getting exactly what you want in a new or custom made setting. This is the type of specialty assembly that Bill Le Boeuf Jewellers does so efficiently. We’ve been doing it at the same downtown Barrie location since 1958. So believe us when we say, Nobody does “I do” like we do. This ready to go finished ring is estate priced at an unsurpassed value of just $2,590.00 CAD. Stock #101-00586.
A striking offering from Peoples Jewellers Composite Diamond Bypass collection (now retired). Unlike traditional bypass settings, this playful ring uses its multi-band top to create the appearance of three rings worn in a casual stack. The petite rose gold bands measure only 1.3mm wide each, while the white gold engagement portion measures 2mm wide. Despite this petite collection, the trio covers a comfortable 4.85mm and is topped with a 7.20mm round halo cluster.
The centerpiece of which is a quartet of invisibly set princess cut diamonds turned to a unique compass-heading angle. The ring has been set with 66 diamonds of I1-HI quality equalling approximately 1.00 carat total weight. The 14 karat 3.3 gram ring currently measures a finger size 7 1/4 with some room to adjust. Estate price $1,200.00 CAD. Stock #e14277.
I’m pretty sure there are potentially better investments than purchasing 10 ounces of silver bullion, but I’m 100% positive there are many worse places to spend a little rainy day money. I’m also sure that buying this silver bar at just 5% above the actual silver price is a value few vendors will match. I can point out a few interesting facts about the cost of silver right now. If you’re reading this you likely know that gold is only around 6% off its all time high in both Canadian and U.S. dollars, but silver is still needs to appreciate 10% to match its all time high that was reached way back in 1980. Right now gold costs close to 100 times more than what silver does! Historically speaking the silver to gold ration has been all over the board from as low as 20 to 1 in 1980 to where we are now at 100 to 1. Unless you feel gold is overpriced right know, silver is very undervalued. This bar can be purchased without additional sales tax. It is available for the actual silver value plus just 5%. Stock #912-00684.
SOLD
This captivating piece features a capped Etruscan chain, a design rooted in ancient craftsmanship, leading to a focal point adorned with a trio of bezel-set gems. At the heart of this ensemble is a natural 0.43 carat deep royal blue sapphire, well cut to throw as much light as the sturdy bezel setting allows. Flanking it are two meticulously matched round brilliant cut diamonds, each boasting SI2-G quality, and combining for a total of 0.33 carats.
The 18 inch necklace, meticulously crafted from 14 karat white gold, retains its original chromy white rhodium finish, as a testament to its condition. Weighing a graceful 13 grams, this piece is a harmonious blend of antiquity and modern elegance. Estate price $1,820.00 CAD. Stock #231-00264.
There is a growing trend in signet rings but instead of traditional script initials, these pinky finger accessories are being decorated with sayings, engraved flowers, or symbols that are meaningful to the wearer. New eyes are looking at these traditional rings as blank canvases. From engraved star signs accented with flush-set diamond stars to inside jokes between couples or friends, the possibilities are limited only by one’s imagination! This particular canvas measures 10.5mm x 10.5mm and its defensive shield shape would make a meaningful background to a personal motto.
The 14 karat gold is a pale yellow that almost borders on green electrum in person. It currently measures a finger size 4 3/4 with plenty of room to adjust. Our on-site designer goldsmiths are ready to transform this generic ring into something meaningful and unique. Estate price $767.00 CAD. Stock #401-00131.
It’s not the biggest diamond and it doesn’t have a setting covered in extra decoration but it can hold its own in outright beauty and quality. From the full shoulder 4.1 gram ring setting constructed from premium 18 karat yellow gold and platinum, to the 0.25 carat VS2-EF excellent cut round brilliant cut diamond. This solitaire was assembled with one thing in mind; traditional quality. The 3.4mm wide ring has a clever “reverse” knife edge shank with a sharp groove running down the centre protecting the finish from becoming easily scratched. A simple 4 prong setting made from ultra durable, ultra white platinum displays the high quality diamond at a comfortably low height.
The smaller than average finger size 4.5 ring can be sized bigger if required. It’s refreshing to see such a quality piece made from the rich traditional colour of 18 karat yellow gold. Perfect condition looking like brand new. Estate priced at $1,208.00 CAD. Stock #e9134.
Technically, diamonds are the only gem composed of just a single element, carbon. In theory this is true but the vast majority of natural diamonds form with trace amounts of other elements. Nitrogen contamination occurs naturally in at least 95% of all earth grown diamonds. Nitrogen contaminated diamonds can be near colourless to light yellow in hue. The purest diamonds are known by Gemologists as type IIa. These diamond contain no measurable amounts of nitrogen, they are usually colourless but they can also be gray, light brown, light yellow or light pink. Rare Type IIa diamonds make the best candidates for colour enhancement by the application of extremely high temperature and pressures similar to what a natural diamond could have experienced when forming in the earth’s mantle billions of years ago.
Only diamonds of high clarity are treaded to high pressure high temperature (HPHT) treatment, as lower clarity diamonds can be damaged during the process. Our latest estate diamond is one of these rare type IIa diamonds. It comes with a GIA report that identifies the diamond as being treated by a process to change its colour.
Because the treatment is similar to what a diamond could have experienced billions of years ago, it is 100% permanent. There is no need to treat it with special care and caution. Without the GIA report we’d be unable to confidently identify that this diamond has had its colour altered. Since HPHT diamonds sell for less, this is another reason to insist on a Gemological Institute of America report for any significant diamond you are considering purchasing. The GIA report described the clarity as VS1, G colour, excellent cut, excellent polish, excellent cut, with no fluorescence. Syntenic diamond screeners and testers CAN NOT detect high pressure high temperature treated diamonds. We run all our estate diamonds through equipment to determine natural or laboratory origin. We were somewhat surprised to identify 2 of the 25 small accent diamonds in the settings were of synthetic lab-grown origin. The original owner didn’t know there were lab-grown diamonds mixed among the naturals. They are flagged by the bright their bright red appearance on the display of the screening computer.
Few jewellers have lab-grown screening equipment onsite. Without the sophisticated machine it is quite possible a jeweller could unknowingly sell a lab-grown diamond as a natural. Simple diamond testers DO NOT separate lab-grown from natural, so buyer beware. The setting that holds this interesting combination of high quality, natural, natural colour enhanced, and lab-grown diamonds was made from premium 18 karat gold. The tiny size 4 1/2, ring can be adjusted larger by one of our onsite goldsmiths.
This sturdy, 4.5 gram, well made diamond ring (1.52ct. tw.) is in excellent condition and is estate priced at $5,400.00 CAD. Stock #101-00503.
More often than you might imagine a piece will come through our estate department that makes the entire staff stop in awe. This 1920s Art Deco brooch is one of those and if you don’t believe me you should see it in person. All of its estimated 2.25 carats of diamonds are antique single cut and old European cut. These antique diamonds display larger flashes of white and every coloured spectral light compared to modern round brilliant cut diamonds. At the slightest movement the entire brooch is set on fire. The ever white platinum has been crafted like the most delicate and intricate lace work, so airy looking it is hard to fathom how it holds its shape. The master goldsmith who made this has hidden careful details all over the 43mm x 28mm expanse.
The more time you spend with it the more secrets of high craftsmanship you find. The 53 diamonds are all of top VS-G quality, ensuring no inclusions or warmth to diminish their brilliance. Though it weighs 9.9 grams the piece has been equipped with a unique clasp that locks closed during wear, making it safe on any fabric or strung across a chain. We had a formal appraisal completed by Harold Weinstein Ltd. (February 2018). They felt an appropriate estimate of value was $16,000.00. Our estate price for this pristine antique is just $7,000.00 CAD. Stock #e12031.
Jadeite is probably the least appreciated and least understood gem in the Western world. This is mostly due to the limited and polarizing experiences we have with the gem. Most Canadians are only familiar with Nephrite jade from British Columbia. Nephrite jade is easily found in giant specimens weighing many pounds to several tons. The inexpensive easily worked, lower quality ‘jade’ is usually carved into Haida inspired tourist gifts and low price jewellery.
True jade is Jadeite, the most spiritual gem for Chinese culture; Confucius wrote that jade is like virtue and its brightness represents heaven. In its most valuable form, jadeite is semitransparent and a vibrant emerald green, known as Imperial Jade. It can be one of the most expensive gems in the world. Fine quality examples are exceedingly rare and seldom come to market. A jadeite necklace made by Cartier set a world record at auction in 2014 selling for $27.4 million USD, the largest bead was just 19.2mm diameter.
Jadeite is a gem that just doesn’t show up very often around here. We’ve only had a few gents rings over the years sell through but none have been anywhere near the quality of these 5 examples.
They came to use in a vintage brooch that would have been next to impossible for us to find a home for. We took it apart and used the diamonds and gold in another project, leaving the 5 high-quality jadeites. Given the age and quality of the original brooch, we were pretty sure the stones weren’t artificially colour enhanced or treated. Identifying colour altered, dyed, impregnated jadeite is extremely difficult for even experienced Gemologists. We felt it was best to send the 5 specimens to The Gemological Institute of America for certification. The report came back just as we had hoped, natural colour with no indications of impregnation.
GIA only examined 1 of the 5, but since all came out of the same piece we are confident all are completely natural colour. We may make some earrings and a pendant, or perhaps a series of cluster rings using these stones. In the meantime, if you’re a fan of high-quality true jadeite and know what you’re looking at, you’ll realize the opportunity. The largest measures 9.99mm x 6.96mm and weighs 2.25 carats.
The August 2021 GIA report can be seen online here. For now, we are keeping them together as a set. They are estate priced for all 5 at $5,000.00. Stock #e14441
According to Forbes.com, the 2020 value of the Rolex brand is 9.5 billion, with estimated sales of $5.2 billion. Volkswagen by comparison had a brand value of 7.9 billion with estimated sales 20 times more than Rolex in the same year. This is an astounding statistic. How can a luxury item with just one factory in Switzerland (soon to be two) command a significantly higher brand value than a major automotive company with over 100 production plants in dozens of countries that employ well over half a million people worldwide? Rolex is much more than a decent watch, they’re a luxury product in the truest sense, they are an aspirational goal, a lifestyle, and a status symbol. You may never own a brand new Bentley automobile (parent company Volkswagon), but with some hard work and saving, owning a Rolex can be had for well under $10,000.00.
The operating costs of the average Rolex are only around $100.00 per year, and there is little need to worry about depreciation. This estate diamond ring is a homage to one of Rolex’s most famous designs. The President bracelet of the Rolex Day-Date model is instantly recognizable down the shoulders of this 10 karat yellow and white gold ring.
The iconic fluted bezel from the Rolex is a very obvious inspiration as it forms the outer bezel securing the natural round brilliant cut diamond. We’ve seen this style of ring before, they have proven appealing to both watch aficionados and someone just looking for an attractive ring.
Bezel set in the centre of this ring is a good sized natural diamond weighing an estimated 0.80 carats. It is a pleasant I1 clarity with small scattered inclusions and a very nice GH colour and a good cut.
The sturdy construction 10 karat two-tone ring weighs in at close to 10 grams and measures an average gent’s finger size 10. This ring can be adjusted up or down 2 full sizes. While not manufactured as precisely as its inspiration, this unauthorized miniature does a good job of capturing the look. I wonder if Rolex gives any thought to products such as this that are made in the likeness of their designs. I secretly think they really don’t mind a little extra promotion and value added to the brand with the crown logo. The 18 karat Day-Date II 218239 used in these images has been spoken for, but the ring is available for the estate price of $3,063.00 CAD. Stock #116-00061.
Who doesn’t love the symmetry and simplicity of a three stone ring. The style has been around for over 100 years and is consistently been a best seller. We have a few three stone designs at Bill Le Boeuf Jewellers that haven’t changed at all in over 50 years. Even in a three stone design can be made unique though. This custom made ring contains three high quality radiant cut diamonds that weigh an estimated 1.23 carats in total. They average a very nice VS2 clarity with G/H colour and are all nicely cut. This modern interpretation combines a flattering double gallery four prong setting showcasing a 0.55 carat centre stone with low bezel set shoulder diamonds. The size 6 ring weighs 5.5 grams in a finger size 6. Comes complete with original certificate of appraisal from December 2008. Excellent condition showing no areas of wear or concern. This ring is a very attractive spin on a classic and popular design. A complimentary sizing by our onsite goldsmiths can be accomplished in just a day or two as needed. Estate priced at $3,465.00 CAD. Stock #e9362.
From bottle caps to fine art and vintage watches, people like to collect the rare and unusual. The the world of precious metals and bullion are no exception, early and vintage silver bars command premiums over the actual precious metal value they contain. This is a scarce Engelhard Canadian 1-ounce fine silver bar. Engelhard refineries were once one of the largest, if not the largest refiner of silver, gold, and platinum in the world.
The company is also credited for producing the world’s first production automotive catalytic converter. The bull logo used on this vintage bar is a combination of ancient alchemical symbols. The circle with a dot in the centre represents the sun, and the masculine metal gold; the reversed C symbolizes the moon, and the more feminine precious metal silver.
Early alchemists combined the two believing platinum was an amalgam of gold and platinum. Engelhard used this symbol on most of their Canadian silver bar production. We don’t really consider ourselves precious metal dealers but we do see bullion and coins come in through our estate department on a regular basis. Unusual bars like this are the rare exception. This scarce Canadian 1 ounce bar is priced at $70.00 CAD and comes in its original plastic packaging. The package has been torn at one end but we don’t believe the bar has ever been removed. As this is a fine silver bullion product, it is not subject to any form of sales tax. Estate priced at $70.00 CAD. Stock #912-00697.
SOLD
Glacier Fire brand Canadian princess cut diamond of very good VS2-G quality and cut. We seldom see well cut fancy shaped diamonds since there are no widely accepted cutting standards for any shape besides the round brilliant cut. Many manufacturers simply cut to achieve a heavy stone without much consideration given to the optical efficiency of the finished diamond. What results with many princess cuts and other fancy shapes are things like thin crowns, huge tables, very thick girdles and overly deep stones. Details like this conserve lots of extra weight but contribute nothing to making a potentially beautiful diamond sparkle more. This 0.70 carat princess cut doesn’t suffer from any of those characteristics. It shows a nice tall crown, smaller than average table, medium girdle and not too deep. It’s also perfectly square only off 0.01mm! Measurements of 4.76mm x 4.77mm x 3.50mm are just about perfect dimensions for a 0.70 carat princess cut diamond.
The Canadian diamond is secured in a traditional 14 karat white gold 4 prong double gallery setting with a flat edge shank measuring 3.0mm wide. A traditional design like this is very versatile for easy wedding/anniversary ring selection. A unique registered laser engraved serial number has been applied to the girdle of the diamond as your guarantee of Canadian origin. Included with purchase is a complimentary sizing, Glacier Fire booklet/certificate along with an International Gemological Institute certificate and appraisal. Estate priced at $3,395.00. Stock #e9191.
After taking a deep dive into medieval and Celtic crosses we have come to the conclusion that this cross is not sure what it is. In truth it seems to be some sort of blend, a mix of Celtic cross, Bolnisi cross, and Thor’s cross. We’ll leave it to you to attach meaning and spirituality to this unique symbol. Regardless of you’re religious leanings it is an impressive piece, made of a solid 8.2 grams of top quality 18 karat yellow gold. The hammered texture and the large mabe pearl really adds to the 16th century feel.
Though a modern make you can imagine the pendant sitting around the neck of some courtier. To stick to the trend of the time we’ve hung it from a brand new 18 inch long black leather cord with super strong 14 karat yellow gold lobster clasp. Estate price for this old world pendant $840.00 CAD. Stock #e12249.
This is an incredible example of a late Art Nouveau diamond ring dating from around 1910. It may be well over 100 years old but it looks almost like the day the finishing touch of engraving was applied to the intricate pierced filigree design.
Its longevity is partly due to the resilient platinum it was constructed from and it likely wasn’t worn every day. This style ring marks the transition period from the Art Nouveau design era to Art Deco. Art Nouveau often used styles found in natural forms and sinuous curves inspired by vines, plants, and flowers. These designs bring an impression of dynamic movement. Other characteristics of Art Nouveau are a sense of dynamism and movement, often illustrated by asymmetry and whiplash line forms.
Once the basic ring has been created a master engraver decorates the soft platinum with leafy patterns, bright cutting, and milgrain edging. The bezel setting still shows evidence of the delicate milgrain outline.
Secured within the smooth low bezel is a spectacular European cut diamond of very high clarity and colour. The setting makes it difficult to accurately measure the diameter but we estimate this diamond to have an average diameter of 8.1mm. The total depth of the diamond is easily measured at 4.8mm. Once a mathematical formula is applied to these dimensions we determined the weight of this diamond conservatively at 1.96 carats. There is a very good chance it weighs 2.00 carats or a touch more. Scattered throughout the 11.8mm wide dome filigree setting are an additional 12 old single cut diamonds of SI-G quality, contributing 0.25 carat of added sparkle.
The ring measures a finger size 5 1/2 and can be adjusted a size or two up or down. Original examples of Art Nouveau rings in excellent condition are rather rare as many have been remodeled to newer designs over the years. We are thrilled the temptation to take this ring apart was never acted upon. For a significant diamond with this sort of value we’d normally have set it to The Gemological Institute of America to obtain a formal grading report. This would require grinding away the bezel to remove the stone and we really didn’t want to harm the setting. Our senior Graduate Gemologist (trained in residence) with over 33 years experience is confident this diamond is of strong VS1 clarity with a G colour. The diamond also displays superior cut, symmetry, and polish, not normally seen on antique diamonds of this age. As an added bonus the large centre diamond displays no fluorescence, although some of the small accent diamonds glow brightly when exposed to long wave ultraviolet light.
Larger diamonds in the 2.00 carat size range are seen more often today, but 100 years ago a diamond of this size would have almost never been encountered in a store like ours. This special ring is ready to be enjoyed for many more generations for the estate price of $31,450.00 CAD. Stock #101-00533.
Viewing by appointment only.
Most people consider the price of gold relative to a dollar. A of today (May 6th, 2025) an ounce of gold is worth around $4,700.00 Canadian dollars. Comparing gold to currency is likely an inaccurate measure of what gold is really worth. Currency is continually becoming less valuable because inflation continuously diminishes its buying power. The value of gold should be compared to what it can buy. What we mean but this is how much gold does it take to buy the things you need. That could be a car, a whole lot of groceries, or even a house. Here is something to consider. We all know how expensive a house costs nowadays. A decent starter house in Barrie costs around $700,000.00 today or the equivalent of cost to 150 ounces of gold. 25 years ago that same house cost around $300.00 ounces of gold. House prices have shot up around 500% in 25 years but gold has appreciated close to 1000%. Amazing as it seems, gold would have been a much better investment than real estate. An interesting automotive comparison would be this; a Corvette cost around 140 ounces of gold 25 years ago, today a Corvette costs the same as just 21 ounces of gold. Yes gold has been the place to park some extra cash over the last few decades. Where the price of gold is heading is hard to say for sure but the trend is still very positive for gold.
Our latest estate bullion offering is this Royal Canadian Mint 1 ounce pure gold bar. It is 99.99% pure, this type of purity is amount the finest that is commercially available. Occasionally the Royal Canadian Mint produce some coins that are 99.999% pure. Gold bullion is exempt from sales tax in Canada. The price fluctuates every day relative to the dollar. A great source for the current gold spot price is BullionVault.com. We are offering this 1 ounce bar for only 2% over the spot price. Owning a little gold can be considered insurance to protect you against the effects of inflation on your cash. We are not big dealers of precious metals although it comes and goes with regularity. If you’d like a little gold bullion this is a great one to start with, RCM products are among the most sought after and trusted in the world. For VISA/MasterCard purchases please add an additional 2% to cover credit card fees. Stock #912-00669.
SOLD
Not only do sapphires come in almost every colour of the rainbow but they come in every shade of blue possible.
The highest value of the spectrum is bright cornflower blue, which these sapphires are in person. That soft bright tone allows the greatest amount of light into the gem to bounce around and create dazzling flashes.
The 9.5mm wide ring was likely custom-made, apparent from the sturdy construction. The ring weighs in at an impressive 11.2 grams and features an additional 0.34 carats of petite round brilliant cut diamonds all of VS-GH quality. Added to the estimated 0.64 carats of sapphires and the chromy white rhodium finish on the 14 karat white gold and you have a show-stopping piece!
The ring is in unworn condition and measures a finger size of 6 1/2 with a bit of room to adjust. It comes with a 2022 appraisal stating an optimistic replacement value of $7,035.00 CAD.
We feel $3,108.00 CAD would be a much more competitive replacement value with new, and our estate price is $2,176.00 CAD. Stock #206-00290.
Blushing pearls are a wonderful alternative to the standard white/cream strands. Firstly, they don’t feel like your grandmother’s pearls, their colour automatically lends a youthful vibe and less traditional, playful feel. The soft rosé tones also wear nicer on most skin tones, creating a more subtle appearance. These 20 1/2 inch and 23-inch strands came in as a single-tiered necklace in need of restringing.
We opted for two separate strands as a single strand is more universal than a tiered double strand, working equally well with a pair of jeans and a cardigan or a cocktail dress.
Both strands feature new 14 karat white gold clasps and are made from 6.5mm Akoya saltwater cultured pearls, proudly displaying their bright luster. Estate price for the newly strung strands $560.00 CAD and $595.00 CAD. Stock numbers e13975 and e13976.
e13975 sold. 23-inch strand still available.
18 karat yellow gold and platinum, for when only the best will do! The 6.0mm wide by 2.0mm thick band is about as well-made as they come and is in like-new unworn condition. The warm high polished yellow features both curved exterior edges and a comfort fit interior.
The brushed finish platinum adds heft to the ring, making the 12.6 grams ring feel much heavier than it looks. The band currently measures a stock finger size of 10 with room to adjust. The estate price for this brand-new band is $2,100.00 CAD. Stock #401-00199.
We have a little introductory course we run through with people who are buying their first significant diamond. We try to keep it as simple as possible as there are so many interchangeable factors that effect diamond value. What we mostly aim for is an understanding of the normal minimum thresholds of diamond quality. For example G colour is usually where you lose any warmth detectable to the untrained eye. SI1 clarity is the point where you are almost guaranteed to not see any eye-visible inclusions. We use these benchmarks to help customers understand what they are looking at to give them a reference point of quality. These rules are flexible and all that really matters is what a diamond looks like in person. Some people can’t see warmth in a colour even as low as J. Others can’t find inclusions in diamonds graded I1. Sometimes we get a diamond that stumps even our well trained eyes, like this GIA certified I1-D. At first look without magnification the 1.25 carat round brilliant looked eye-clean. We couldn’t find the inclusions until we looked with magnification then looked again without.
Even then you can only see the feathers at a specific angle and only by looking closely for them. This is mostly due to their fantastic positioning within the facet pattern but also because of the added brilliance caused by the triple “Very Good” grade (very good cut, very good symmetry and very good polish). The stunning diamond is a fitting crown to the three piece wedding set that accompanies it.
The 14 karat white gold set is all geometric trellis work and milgrain accented diamonds. Combined, the round brilliant cuts and graduated princess cuts weight an estimated 2.05 carats for the set. The trio all measure a finger size 6 1/4 with some room to adjust. The main diamond is laser inscribed and comes with its original GIA Diamond Grading Report (May 2019) which you can see here.
As a finishing touch the diamond exhibits no trace of fluorescence when exposed to long wave ultraviolet light. Estate price for the set only $11,200.00 CAD. Stock #e12282.

A petite wedding set from Canadian chain Charm Diamond Centers. The feature of the by-pass style solitaire is a Canadian 0.24 carat round brilliant cut of excellent make and very good SI1-G quality.
The diamond is a bright spark surrounded by wide 18 karat white gold swooping shoulders. At some point a fitted wedding band was custom made to tuck into the engagement ring, featuring a brief dash of channel set round brilliant cut diamonds. That understated band makes a perfect pair to the subtle engagement ring.
Both pieces weigh in at 6.5 grams together and currently measure a finger size 6 3/4 with room to adjust. The engagement ring on its own has been issued a replacement value of $1,700.00 from a 2009 Gem Scan Laboratories Certificate. Our estate price for the two ring set is just $1,033.00 CAD, rendering the custom made one of a kind wedding band basically free. Stock #e10605.
Omega necklaces make a very bold statement with their wide dome cross-section that looks like a shiny ribbon of gold around your neck. They are usually seen in shorter lengths to highlight a pendant or are simply worn alone. The shorter lengths often encountered are usually 16 to 17 inches long. The semi-flexible link design and short length mean the pendant sits just below the collar bones. This 4.0mm wide example gives you the added benefit of being yellow on one side and white on the other. It’s two necklaces in one, able to showcase a variety of pendants.
14-karat gold construction except for the 10-karat lobster catch that must have been replaced at some point. The 26.1-gram necklace is in excellent like new condition. A little extra care was taken when this one was manufactured due to the hinged chain ends. The hinged ends allow a little more flexibility and at the same time make the piece far more durable. Estate priced at $3,120.00 CAD. Stock #431-00559 e9837.
Pretty much any vintage Rolex is a desirable thing. Some of the professional models from the 1960s and 70s have seen their value escalate well into 6 figures for exceptional rare examples. The esteemed Geneva based company’s most popular offering has been somewhat left behind. The Datejust model was introduced in 1945 at the same time Rolex was celebrating their 40th anniversary. It was quite revolutionary for the era being the first chronometer grade automatic winding wristwatch to display the date in a small window on the dial. The name Datejust may seem a bit awkward, but it makes perfect sense given some thought. Most watches slowly turn over the date display starting around 10:00pm taking several hours to fully turn the disc to reveal the day of the month. Rolex produced a quick turn mechanism advancing the date in the blink of an eye within a few minutes of exactly midnight. This seemingly simple process makes the date display absolutely true and “just”, hence the unusual moniker. Modern Rolex production is estimated at around one million watches per year making a contemporary Datejust very common. This wasn’t always the case. It took Rolex 60 years to produce the first 1 million watches total production of all models. This example is serial number 1,071,990. After hours of scouring the internet and speaking with various Rolex aficionados no one has seen one like this before.
The golden brown dial with black text is a colour combination we’ve never encountered. Occasionally vintage black dials from the period can turn a deep chocolate brown over time but these always have white or gold script lettering. Perhaps this was a silver or champagne dial with black writing that somehow colour shifted to this marvelous hue. If this is the case we can’t find another example anywhere. The luminous tritium plots are mostly intact and the period correct dauphine style hands with rare tapered ramped hour markers are also original.
The rest of the watch is pretty much what you’d expect for a watch that was made in the fall of 1964. Wear and tear are appropriate on the case and fluted bezel. We don’t believe the watch has been refinished before. The USA made hollow link jubilee bracelet is showing the expected sag but this style of bracelet was never tight even when brand new. An original fold over buckle closes snugly with a satisfying click.
Powering the watch is a 26 jewel Rolex manufactured calibre 1560 in excellent condition. There is no rotor rash scaring on the plates or case back. We just performed a full mechanical overhaul to the mechanism along with a successful vacuum test for water resistance after installing a new Rolex crystal.
When servicing the watch we were careful to maintain the original finish on the case and bracelet. It can be refinished many times but it can only be original once. With pricing of used and estate professional models quickly becoming out of reach for most, vintage Datejusts could be the place to see the next wave of collector interest. Including a 1 year Bill Le Boeuf Jewellers warranty, this curious bit of Rolex history is estate priced at $9,250.00 CAD. Stock #e11031 505-00172.
18 karat white gold Baptism pendant/charm. Plenty of room the engrave a date and short message. Made in Italy by one of the world’s finest manufacturers UnoAerre. Excellent condition, never used. 3.5 grams in weight. Estate price $400.00 CAD. Stock #436-00140 e14177.
SOLD
Bill Le Boeuf Jewellers has been buying estate jewellery for over 60 years. This unique experience has given us a reputation as an estate jewellery destination and we consistently acquire unique and sometimes custom made pieces originally purchased from boutiques and micro chain stores all over North America and the world. This variety of sources means that we regularly see engagement ring styles that we’ve never encountered before. That was the case for this 6 gram 14 karat white gold engagement ring. The ring shows the signs of being custom made with the hand engraved details and solid construction that you don’t usually see in production pieces. The unique design plays with the contrasting optical effects of an uninterrupted shine of channel set princess cut diamonds bracketed by petite sparkling round brilliants. The main 0.45 carat princess cut diamond was chosen to be slightly narrower than the width of the ring, highlighting it’s brilliant pattern by surrounding it with high polished gold. The theme of contrast is continued when you view the ring from the side, as three little bead set diamonds decorate the space between the two curving prongs. Another tell tale sign of custom made pieces is top quality diamonds; the 1.08 carats of VS-FG diamonds that cover the ring are certainly top quality. The ring measures a finger size 7 and is accompanied by a 2013 Prosper Designs appraisal. Estate price $2,100.00 CAD. Stock #e9968.
On a budget but still want a substantial feeling, good quality diamond engagement ring? Nothing revolutionary here, a nice quality, well crafted ring that was assembled with care and good components. Many rings at this price point have been compromised with hollowed out lightweight settings. At its widest point, the shank on this ring measures 3.2mm and it measures a minimum of 1.6mm thick around the circumference and with no hollow shoulders.
This results in a ring that will last a lifetime and feel great. The traditional cathedral shoulder design terminates in a soft point that showcases a beautiful 0.40 carat SI1-H round brilliant cut diamond with a very good cut. Big enough to be noticed but small enough that it doesn’t even cost as much as most mortgage payments. The unknown manufacturer of this ring could have easily lightened this setting up by a gram or two and no one would have noticed, but it’s nice to see a high quality finished product was the goal.
The ring is in excellent condition, looking like new. This less is more design is easily matching up with any style flat shank wedding or anniversary ring. Estate priced at $1,400.00 CAD. Stock #101-00377.
A Spence Diamonds wedding set that cuts no corners. The 0.52 carat princess cut center is of an eye-clean SI1-GH quality and is surprisingly well cut considering the standard, average at best cutting practices we normally encounter with princess cuts. The two rings are hand set with an additional 23 round brilliant cut diamonds of matching quality that bring the sets total weight up to 0.88 carats.
All of this brilliance is contained in solidly built rings cast from ultra premium 19 karat white gold. This 79% pure gold alloy usually contains palladium enabling this exotic alloy a slightly more white hue compared to a typical 14 or 18 karat white gold. The set weighs an impressive 6.2 grams and currently measures a finger size 5 1/2 with room to adjust. Being sold as a set only and priced at only $1,925.00 CAD . Stock #e13249.

Silver bullion is so inexpensive right now. 1 ounce of silver is more than 88 times less expensive than 1 ounce of gold. The historic relationship of gold vs. silver price is closer to 40 to 1. There have only been 2 other times in history that I’m aware of when the silver/gold ratio has been more distorted than right now. This tells us that gold is overpriced or that silver is under priced. With all the chaos in the world at the moment my personal belief is both silver and gold are under valued but much more so in the case of silver. With silver pricing as low as it has been for the last few years we’ve slowly been acquiring silver but seldom (almost never) do we sell any of it. For all those people who call us asking for silver bullion here’s your chance. These 100 ounce bars of 999 fine silver were manufactured by North Texas Refinery.
The bars measure around 14cm x 7cm x 3cm but are surprisingly hefty when you hold it in your hand. Each weight just a little under 7 pounds. There is no sales tax on precious metals; Revenue Canada looks upon these sales as financial transactions therefore not subject to any form of sales tax. Everyone should own some bullion as security against the effects inflation has on your cash. These 3 are the only 100 ounce bars we are selling at the moment. Priced at just spot plus 5% currently around $5,010.00 CAD (credit card purchases please add 2% service fee). First come first serve. Contact us immediately if you’re interested. You almost never see fine silver bullion price a such a low premium over spot, usually it is close to 10% above the spot price or more depending on the brand and form. Stock #912-00677.
SOLD
One of the only rose gold gents rings we’ve had the pleasure of showcasing, and an antique at that! The shank bottom features its original European hallmarks that have unfortunately been smoothed down from wear, to be unrecognizable. What we can make out is a head in profile wearing some kind of helmet with a peaked edge. The soft colour of the gold, the hand engraving, and the overall design/construction lead us to believe this ring was made somewhere in the Eastern Europe region. The ring top has been heavily hand-engraved across most of its surface.
The very top of the ring features a heavy 18 karat white gold plate centered by a single 0.50 carat round brilliant cut diamond. The diamond is a bright SI1-I quality, showing no eye-visible inclusions and throwing a ton of light. Even though the handmade ring is hollow under the setting, it still weighs in at a substantial 23.7 grams; most men’s rings seldom exceed more than about 10 grams.
It currently measures a finger size 11 1/2 with some room to adjust up or down. Estate price $3,000.00 CAD. Stock #e14189 116-0047.
For Breitling fans and exotic automobile enthusiasts alike this one’s for you. The 49mm diameter Breitling for Bentley Barnato Racing edition makes a cool lifestyle statement. The unique function of the little steering wheel chronograph registers gives the dial more motion than a standard analog chronograph. Instead of tiny little hands slowly circulating a small minute/hour register, the actual steering wheel style registers turn around fixed indicators. The chronograph seconds register is also over geared to circulate the full dial in just 30 seconds instead of the usual 60.
This makes split-second time calculation down to a 1/10 of a second easily possible combined with the oversized black dial. A handy tachymeter chapter ring scale has been indexed perfectly for motor racing with readings for 95 to 320 units per hour. It’s more than just a pretty face, it’s a well thought out tool for the racing/watch aficionado. The unique engraved bezel is designed to resemble the look of the Bentley grill.
The winding rotor covering the 38-jewel Swiss movement has also been designed to emulate the look of a modern Bentley wheel.
The Barnato connection comes from Woolf Barnato who was a wealthy British financier and Bentley owner. He eventually would own the company itself after investing a sizable sum of money to keep the company in business. In the late 1920s, he drove his Bentley race car to 3 straight wins at the 24 Hours of Le Mans race. To this day he is the only person to achieve such a perfect entry vs. win ratio of 3 for 3. Our Barnato Special Edition watch was purchased in Canada in December 2013. It comes complete with the original inner/outer box, instructions, and endorsed warranty card.
The watch is in excellent original condition having only been occasionally worn by a careful owner.
The highly polished finish is almost perfect showing only the most minor of surface scuffs. Estate priced at $8,888.00 CAD. Stock #515-00069.
Technology has lowered the cost of producing lab-grown diamonds from more than natural diamonds 70 years ago to around 98% less expensive today!!!! Yes, that number is correct. If you know where to shop, you can buy a lab-grown diamond for around 2% (or less) of what an equivalent quality natural sells for. That’s how technology works, as it matures, the efficiencies of manufacturing bring prices down to next to nothing. We recently did some online shopping for lab-grown diamonds from a couple of popular jewellery chain stores, and an online only vendor. The average markup for their lab-grown diamonds was over 500%. We saw mark ups ranging from 400 to over 700% in our random sampling. Because lab-grown diamonds cost almost nothing the make, the final retail price is still significantly less expensive than a natural diamonds even with these huge margins. Many vendors are applying large markups because manufactured diamonds are so popular right now and most people never bother to compare pricing with stores like us. We stock very few lab-grown diamonds but we’re happy to give you a quote on one. If you’re considering a lab-grown diamond, give us a call first, we’ll save you thousands of dollars.
Our latest natural diamond isn’t perfect in any respect, but it is 3-4 billion years old, sparkles very well given the modest quality, is a miracle of mother nature, and has residual value exponentially better than a lab-grown diamond. For a natural diamond it is a good size at over 1 1/2 carats. Lab-grown diamond are easily cultured in sizes well over 3 carat and sell brand new for less than $300.00 CAD per carat in VS-G (or better) qualities. When pre-owned lab-grown diamonds start to show up on the secondary market, they will be almost impossible to sell at any price. Natural diamonds have a proven record of value and are still what most people would prefer given a choice. Our nature diamond also displays some fluorescence when exposed to long wave ultraviolet light. This phenomenon never happens in lab-grown diamonds and occurs in some natural diamonds with trace amounts of nitrogen found within the crystal structure. If you see your diamond glow in a similar fashion in “black light” (long wave ultraviolet) you can be sure it isn’t an inexpensive lab-grown.
This diamond would make a great pendant or earring, as most people are willing to give up some quality in order to get a bigger stone that doesn’t break the bank. The I2 clarity grade is pleasant as the numerous crystal inclusions are mostly scattered and don’t interfere excessively with the transparency. The warm colour grade of approximately RS shows as a weak yellow to brown tint. These characteristics are common in natural diamonds and support a natural look far more that “it looks too good to be true” giant lab-grown diamond. We’d love to create something unique to display this natural diamond for you. It’s a large diamond for the estate price of only $2,000.00 CAD. Stock #191-00161.
Round brilliant cut diamonds are the most expensive shape available. This is partially due to their consistently high level of popularity and the amount of weight that is lost when they are cut to a high standard. If you’re in the jewellery business long enough you see fancy shapes come in and out of popularity and their prices rise and fall with that movement. Currently ovals are on the rise and princess cuts are in a bit of a decline from their place at the top a few years ago. Opting for a princess cut will save you some serious money, quite often at least 20% compared to a round brilliant cut. With their busier facet pattern they create a geometric, splintery light show during wear. This particular princess all the more so thanks to its higher cut quality.
As no diamond shape except the round brilliant has a set standard for cut grade many diamond manufacturers will use fancy shapes to hide bad cutting practices. Princess cuts often have very thick girdles, huge table facets, ultra-shallow crowns, and deep pavilions designed to hide extra weight. It’s very important when buying any shape (especially a fancy shape) that you speak to someone who understands diamond geometry for all shapes. We have two GIA certified diamond graders here at 52 Dunlop St West you can talk to. The 0.91 carat here is also a nicer SI1-H quality making it colour and inclusion free to the unaided eye. It’s been set into a timeless 2.8 gram 14 karat white gold solitaire that currently measures a finger size 4 1/4 with room to adjust up in size. The ring is accompanied by an HKD Report stating an optimistic opinion of value at $10,800.00 CAD.
Our more competitive opinion of the new replacement value is $6,500.00. Our estate price is $4,550.00, CAD. Stock #e11856 101-00323.
SOLD
A pendant/brooch from the very early 1900s that perfectly encapsulates the jewellery of the Edwardian era. With the advent of the oxyacetylene torch this was the first period where platinum could be easily worked by most jewellers. So naturally the ever-white precious metal sprang up everywhere. With its unique working properties the medium allowed goldsmiths to create finer, more delicate details than ever before. The aesthetic of the era reflected that as ethereal lace was woven into metal and diamonds. This 32.5mm diameter circle is a perfect specimen.
The outer wreath is a repeating pattern of diamond encrusted leafy sprigs and wrapping swirling vines measuring 0.6mm wide. The centerpiece features four creamy white pearls and one 0.25 carat old European cut diamond.
The other 66 are a mix of antique rose cut and mine cut diamonds bringing the total carat weight of the piece up to 1.00 carat. The center piece is backed by an 18 karat rose gold support for stability. The 115 year old piece weighs in at 9.2 grams and more than earns its estate price of $1,820.00 CAD. Stock #e13136.

Drop pearls are almost always reserved for earrings and pendants as their shape is exaggerated by the illusion of gravity pulling a drop down to earth.
But this set is rounded out with a matching ring, featuring a gravity-defying drop pearl in the process of pulling up and away from the ring that carries it. The high-luster grey pearls mostly feature red and purple overtones with the pendant displaying some strong greens as well. The warm 14-karat yellow gold plays contrast to the smokey drops and display a retro 90s motif.
The solid-constructed ring measures a finger size 6 1/2 with room to adjust as needed, the pendant and earrings are all articulated allowing the pearls to roll and swing during wear.
All are accompanied by equally-retro appraisals from 1998 and can be purchased as a pendant/earring set for $700 and another $1,050.00 for the ring separately. Stock numbers 231-00210 and 206-00374 respectively.

Ears and pendant have been sold. Ring ring is available.
Jade is graded by three unequal factors, the most important is colour, then transparency, and finally texture. Jadeite comes in many colours but the most valuable is imperial Jade, a vibrant emerald green colour. Weak colours are obviously less valuable and the more grey present in a green the lower its value. Our example is a light slightly grey-green, probably most accurately labelled pistachio green. It would make a great wall colour but for Jadeite it’s not the most valuable. For transparency, the highest grade is semitransparent, lay the gem over text and you should be able to distinguish the writing though the letters would be slightly blurred. The more opaque the stone the less valuable it is.
Our 3.86ct oval cabochon cut Jadeite is mostly opaque, allowing some translucency to brighten the gem. Jadeite’s final quality factor, texture, is the least important because it is difficult for Jade to take a perfect high polish. The thick grain that makes it so tough also lowers its ability to be mirror-finished, but still, the best Jade takes a very fine polish. Our example displays the typical waxy lustre expected of most Jade. The 11.8 x 8.7mm gem has been shouldered with 0.12 carats of extra high quality VVS-F round single cut diamonds and all are set into top-quality 18 karat rose gold. Estate price $1,120.00 CAD. Stock #206-00311.
Ready made starter set of fine silver (99.99% purity) Royal Canadian mint maple leaf coins. We get more requests for maple leaf coins than any other variety of silver bullion. Most times we have none in stock and we don’t keep a file of those looking for them. So when they become available don’t think about it for too long. They are always sold on a first come first serve basis. This random grouping of years is a little more interesting because you get 6 different years in the collection with 2 different portraits of the queen a special commemorative fireworks privy mark on the year 2000 coin.
Most of the coins appear to be in untouched condition, still in their original plastic packaging. The first Royal Canadian silver maple leaf coins were issued in 1988 and continue to this day. They are into the 4th generation of portraits and the reverse side of these coins always features the iconic image of a maple leaf.
Enhanced security features made their way into production in 2014. The standard issues mintage for these coins have been as low as just over 100,000 struck in 1997 to approaching 30 million examples in 2014. In our collection there are a couple uncommon years 2000 & 2001 with mintages of only around 400,000 each. These coins are sold without any sales tax added. They are considered a financial transaction exempt from sales tax. These are a great way to get you feet wet in silver bullion investing while at the same time getting some no charge extra value from the collector aspect of Canadian maple leaf 1 ounce coins.
The price for silver has been on the rise for many years but still hasn’t touched its all time high of around $58.00 Canadian in 1980. This set of 9999 fine silver coins is being sold as a set of 16 only for just their value in silver plus 10%. If you’re interested in this set please contact us ASAP as these will sell quickly. The price for these coins changes every minute with the silver markets. At current silver pricing (Feb. 25th, 2025) the set will cost you around $805.00 CAD. Stock #912-00672.
SOLD
This antique-inspired halo takes the “cushion” shape very literally, placing its main diamond at the center of what looks like an overstuffed velvet cushion, all it’s missing is the tassels at the corners. That must mean the 0.48 carat SI1-J round brilliant cut diamond is the crown! The rest of the ring, and its custom-made contour band, have been hand-set with 89 petite round brilliant cut diamonds, bumping the total weight of the set to 0.87 carats.
The pair is made from bright white 14 karat gold and currently measures a finger size 5 1/2 with a bit of room to adjust. Estate price for the set only $1,890.00 CAD. Stock #e8982.
A classic example of a diamond solitaire engagement ring. The natural diamond in this one weighs nicely over a carat, at 6.7mm diameter and an estimated depth of 4.2mm suggests the round brilliant cut diamond weighs 1.15 carats. Our 2 onsite gemologists have conservatively graded the clarity as an I2, many would argue this one an I1 due to the scattered nature of the small crystal inclusions. The inclusions can easily be resolved under magnification but go unseen under casual observation.
The colour has been estimated at an “I”, good to very good cut, and very slight fluorescence, round out the quality characteristics necessary in determining its value. The 14 karat white gold setting is heavier than you’d expect these days, weighing in at 4.1 grams (including the roughly 0.25 gram diamond). The knife edge shank measures 3mm wide in a finger size 8.
One of our onsite goldsmiths can easily adjust the size down as far as a 5 without overstressing the white gold. It is in excellent condition showing little wear except for some light scratches on the rhodium plated surface. In fact, the only preparation required before it was offered for sale is a high temperature ultrasonic cleaning.
We’d be happy to polish the ring while you wait if you want a perfect mirror finish. You can buy an almost worthless lab-created diamond for more money that this or you can choose this 2-3 billion year old miracle of mother nature for the estate price of $1,890.00 CAD. Stock #101-00612.
You didn’t settle for just an average girlfriend so don’t make her settle for just an average engagement ring. When only the best will do, do platinum and do it with a fantastic diamond. This platinum set was hand made to a very high standard using 30 channel set VS-GH round brilliant cut diamonds totaling approximately 0.87 carats. The three size 8 1/2 rings weigh a combined 18 grams. The six prong Tiffany style engagement ring was manufactured by accomplished Toronto jewellers Fortunes Fine Jewellers www.fortunes.com and contains one round brilliant cut diamond weighing 1.28 carats of excellent VVS1 clarity, G colour, excellent cut and no fluorescence. The GIA certificate 1152451942 also states excellent symmetry and very good polish. The complete set is estate priced at $16,500.00 CAD. The centre diamond is available separately if you have a different design in mind for $13,200.00. More information on the centre diamond can be seen in the estate diamond section of website. Stock #e7483.


Centre diamond sold. Rings are still available.
Looking for a current style diamond ring and don’t want to compromise quality or diamond size but need to do it on a budget? Here’s the ring for you. This unworn ring is in perfect condition and contains a 0.33 carat excellent cut SI1-F round brilliant cut diamond secured in a 6 prong setting. The 3.8 gram 18 karat white gold ring also contains 50 small bead set brilliant cut diamonds of SI clarity and I colour. The shoulder edges and gallery have been decorated with a mill grain border giving this previous owned by never used engagement ring a vintage look. The finger size 6.5 is should fit the average finger but this can be changed easily by one of our on site goldsmiths. Estate priced at $1,680.00 CAD. Stock #e8439.
Something unique to the jewellery industry is the ability to recycle unendingly. Diamonds don’t go bad and gold can always be refined back to its pure state and alloyed anew. So the concept of redesigning is as old as the tradition of wearing precious jewellery itself. We can always tell when a piece is a redesign thanks to the strange mix of ingredients. In this case, it’s a mix of baguettes, petite round brilliant cut diamonds, and round single cut diamonds artfully combined into something new.
These small diamonds weigh an estimated 0.20 carats in total and are of high VS-H quality, building towards the main diamond. That 0.53 carat round brilliant cut has been set into a compass heading setting and is an equally impressive VS1-H quality. The nature-inspired vintage remount is in like-new condition, retaining its original rhodium finish. It measures an overall width of 9.8mm and a current finger size of 7 1/2 with some room to adjust. Estate price $2,800.00 CAD. Stock #131-00150.
Certainly, an inventor has the right to name their invention after themselves but when the American goldsmith Thomas Belcher invented a new kind of diamond setting in the mid-1800s, could he not have thought of a more graceful name than the Belcher setting? Because it really is a thoughtful setting style, sinking the diamond or gemstone protectively into the ring top and digging out decorative high polished Us between the prong sets.
This cluster example takes its inspiration from that setting but mostly drops the decorative Us in favor of packing the 7 diamonds tightly together. The 12.3mm wide ring carries its approximate 1.00 carat total weight of round brilliant cut diamonds proudly, locking them in place with subtle white gold prongs. Being a high VS-H quality they are certainly worthy of their seat of honor!
For some added contrast the 14 karat yellow gold that makes up the body of the ring has been polished and satin-finished with a final touch of a blackening running down each shoulder.
The substantial 12.7 gram ring currently measures a finger size 12 1/2 with room to adjust. Estate price is $2,990.00 CAD. Stock #116-00060.

White gold bangles are unusual and having two to showcase at one time has never happened to us before. The pair are brightly rhodium plated and free of dents or dings. The double-row bangle measures 8.1mm wide and the other measures 4.1mm wide.
Both are secured with safety locks and spring-hinged ensuring they snap closed and stay closed. The oval shape of the bangles keeps them tight to the wrist during wear and for the narrower bangle, it ensures the decorative details are always at the top of the wrist.
Both are hollow and constructed from 10-karat white gold with the wider bangle weighing 14.9 grams and the narrower weighing 9.7 grams. We’ve priced them at $75/gram for the estate price of $1,122.00 CAD and $730.00 CAD respectively. Stock numbers 441-00261 and 441-00262.
SOLD
Sometimes I wish our photos weren’t quite so revealing. From a naked eye perspective this diamond pendant does what a diamond pendant should. It sparkles and twinkles great thanks to the very good cut, excellent colour, and generous 1.12 carat weight. The single gallery 14 karat white gold setting really sets the diamond off.
Despite being an I2 clarity it looks great. The grade setting feather inclusion can be seen without magnification under close scrutiny, but if they’re that close they deserve to be smacked. This is a natural diamond that took millions of years to form and its birthmarks are part of its history and character. The large hinged bail will accommodate a light to heavy weight chain or even a cord style necklace.
This is one of those jewellery items that needs to be seen in person to be properly appreciated. A bright, well cut diamond pendant of this size for under $3,300.00 represents excellent value. Beware of inexpensive diamonds that are hazy and dull. Many times diamonds like this I2-G look better in person than a stone with a higher clarity and colour. The simple 14 karat white gold Italian chain we have pictured with the pendant is available for $95.00 extra. This sparkling estate diamond pendant is priced at $3,290.00 CAD. Stock #161-00284.
Transport yourself into the exquisite world of post WWII jewellery creativeness with our meticulously handcrafted jade and diamond ring, inspired by the timeless allure of the Edwardian era. This platinum masterpiece is a celebration of delicate wirework accents, reminiscent of the intricate craftsmanship that defined the period.
At its heart lies a pear-shaped apple green jadeite (forgive our pictures that dull the glowing-from-within tone), a gem revered not just for its stunning color but also for its rich cultural history. Surrounding the jade are 27 round single-cut diamonds, totaling 0.20 carats, each meticulously set to enhance the ring’s overall brilliance.
The sprawling 16.5mm by 20.7mm ring top was custom made around this intense gem by a Chinese goldsmith of high skill, judging by the Hanzi makers mark in the shank.
Weighing 6.8 grams and boasting a finger size of 9, this ring is a fusion of timeless design and contemporary wearability. Estate price of only $900.00 CAD. Stock #206-00503.
The Paper Flower line is best described by Tiffany & Co. as “Paper Flowers is about stripping away all of the rules associated with fine jewelry. Luxury shouldn’t always mean formality, so we used precious stones and the finest materials, but in a way that you can live with every day.”. The platinum, diamond, and tanzanite studs are certainly suitable for daily wear measuring 12.45mm in diameter. The earrings are designed to appear like three individual petals layered on a central spoke, the way you would have assembled them if they were constructed from paper.
Two petals are pave set with 0.50 carats total weight of top VS-F quality round brilliant cut diamonds. The third is left high polished as contrast and to draw the eye to the lilac blue cushion cut tanzanites. The studs are equipped with heavy posts and their original button-release clutch backs.
They are accompanied by their black velvet inner box, robin’s egg blue outer box, and bag. Estate price $3,000.00 CAD. Stock #211-00105.

Shopping for bangles you’ll often see the same things over and over again, varying only in width and the pattern engraved on the surface. So you can imagine our delight when these narrow wreaths of rose gold came in. Cast in solid 18 karat each is a sculptural representation of curving vines patterned with mill work and accented with tiny leaves. They weigh 14.6 and 12.3 grams and will add interest to any layered combination of bracelets or cuffs. Estate priced at $2,100.00 CAD. Stock number 441-00040 e12055.
SOLD
Almost every green translucent or semi-transparent gem is identified as “jade”. Even jade consists of several different minerals that have values at completely different ends of the spectrum. This beautiful mineral/gem is correctly know as chrysoprase and has nothing in common with jade aside from its beautiful bright apple green hue resembling extremely expensive jadeite. Chrysoprase is actually a variety of cryptocrystalline quartz, similar to onyx and agate. The lovely green hue occurs as the result of trace amount of nickel held within the gem. It is a fairly hard and tough mineral suitable for jewellery use. This example has been set in an interesting bark textured oval frame ring design design.
The vintage ring is made from 14 karat yellow gold with sturdy gallery featuring the same bark texture. The flat shank measures 3.5mm at the shoulders tapering slightly at the bottom in a finger size 7 1/2. The domed cabochon cut chrysoprase measures 14mm x 10mm and is estimated to weight approximately 3.33 carats. Green is a popular colour again and this ring is a fun retro design that showcases the colour very well. Our onsite goldsmiths can adjust the size up or down if required. The excellent condition ring is estate priced at $858.00 CAD. Stock #206-00441.
SOLD
Gravity and time are fundamental forces affecting everything and everyone. Measuring the precise passage of time is every watchmakers goal. The invention of the sundial allowed the ability to interpret (with a relative degree of accuracy) the time of day as the sun traveled across the sky. As technology evolved, ever more complicated portable machines were developed to display time of day or night. Micro mechanical clock makers eventually developed devices small enough to fit into a pocket. High quality spring driven pocket watches, with finely crafted jeweled movements released power from tightly coiled mainsprings with astounding precision. It’s truly amazing that such mechanisms were accurate at all given the dynamic forces they’re exposed to. Tension on the spring, temperature, acceleration/deceleration forces, positional error and gravity all work to disrupt the steady and consistent display of time. Watchmakers learned how to compensate and reduce many of the error factors, but gravity was a constant force affecting time keeping accuracy. The tourbillion complication was designed to pretty much eliminate the affects of gravity on the escapement in a vertical position. As pocket watches were usually worn in a vertical position this makes perfect sense.
The tourbillon cage in the Zenith Captain 03.2190.4041/01.C498 rotates the jewelled escapement on its axis once every minute, effectively eliminating the gravitational forces affecting the tiny components.
Sounds simple enough in theory but it took many years for anyone to successfully build one. They are extremely rare and they are very expensive to produce. This short 16 second YouTube video shows the intricate escapement with balance wheel rotating. When this watch was new it carried a MSRP of over $34,000.00 USD. We have the original receipts showing a purchase price for over $30,000.00 Canadian plus tax. This watch is in hardly worn, like new condition. It shows only a few small scuffs on the outside case edge at 9:00 o’clock from resting on its side.
It is functioning perfectly while running at an industry leading 36,000 cycles per hour from the El Primero based movement. This watch is as complete as the day it was purchased from a Canadian authorized Zenith agent in the fall of 2015.
Inner/outer boxes, instructions, endorsed warranty card, accessories and even the original cardboard shipping box are included. If you consider yourself a luxury watch connoisseur or collector, a tourbillon equipped watch must be on your wish list. Including a 1 year Bill Le Boeuf Jewellers wholesale warranty this exceptional watch is priced at $17,500.00 CAD. Stock #501-00054 e12976.
We have written and discussed previously the significance of the Omega Speedmaster. It was the watch selected over many other major watch brands (including Rolex) by NASA to be the watch “flight qualified” for all astronauts. From the Gemini 4 and of course, the Apollo 11 mission. It was the first watch worn on the moon. In fact, the old-school hand-wind Speedmaster Professional mechanical watches were standard issue well into the space shuttle program. The Omega Speedmaster Professional remains one of several wristwatches qualified by NASA for all manned spaceflight missions.
The history of the Omega Speedmasters begins in 1957 with the introduction of Omega’s very first Speedmaster reference CK2915. A chronograph designed to be robust, sturdy, and reliable. It originally was intended to be used as a timekeeper for racing or aviation when split seconds count. The Speedmaster has evolved over the last 7 decades adding more models, variations, and changes to the case shape and dial, but the original ’57 Speedmaster or pre-moon Speedmaster remained an admired and desired look. Our latest Speedmaster takes the basic concept into a more luxurious design, featuring solid 18-karat case and bracelet construction. The old hand wind 1861 movement found in the Moonwatch has been replaced in this model with Omega’s caliber 3303.
This 33-jewel movement adds automatic winding, superior accuracy standards, a lengthy 55-hour power reserve, and a useful 31-day calendar.
The luminous broad arrow hour and minute hands are reminiscent of the first Speedmasters, and the red 1957 is an obvious acknowledgment of the debut year for the model.

The watch is freshly serviced and shows evidence of use. There are a few tiny impact marks on the sapphire crystal edge, but the viewing area remains in excellent condition. The most significant area of wear is the edges on the tachymeter bezel from the 8:00 to 11:00 o’clock position. The wear looks much worse in the images than in person. 
These sharp and flat polished areas on the bezel are prone to impact dings and scratches on all Speedmasters, a little more so on the softer 18-karat luxury versions. We can always polish the edge a little bit to lessen or completely remove this wear, but the debossed printing may be slightly affected. The scale printing could also be completely removed leaving a simple polished bezel, which would actually look quite nice. We’ll leave that decision up to the new owner. Constructed from premium 18-karat rose gold this watch is a true heavyweight despite measuring 42mm in diameter. With the full complement of 21 links (7 are removable), this watch weighs over 227 grams! The bracelet with concealed clasp shows almost no sag and zero stretch.

We’ve opted to leave this watch in its original unpolished condition. It could be refinished and polished at the expense of leaving some gold on the polishing wheel and losing some of the subtle case/bracelet details.
This watch was purchased new at Bill Le Boeuf Jewellers when we were authorized Omega agents. It comes with the original wooden Omega box (the cuff is missing), chronometer hang tag, original navy blue dial, timing report, and vacuum testing result report. Our master watchmaker performed a full overhaul of the movement in March 2023. The freshly serviced mechanism is running well within chronometer accuracy standards.
We are happy to provide the new owner with a 1-year warranty. Stock #510-00125.

Viewing by appointment only.
The Japanese are the undisputed champions of the pearl industry, they produce some of the highest quality pearls on the market. A quick tip for judging pearl quality is to look at how reflective a pearl’s surface is. The highest quality nacre will reflect the world around it like a tiny fuzzy convex mirror. The sharper the reflections, the thicker the nacre, the longer the pearl was grown, and the higher it’s quality. The next thing you want to check for is blemishes on the surface of the pearls, a couple of natural dimples and bumps here or there is to be expected, but the more you encounter the lower the value of the strand.
This strand of Japanese pearls is flapper girl worthy measuring 34 inches long and displays goog reflections you’d expect of the pearl masters. The 7.5 – 7.9mm pearls do display a bit of dimpling and bumps on their surface but they are well-matched to each other. The strand is a softly blush colour and has been appropriately equipped with a 14 karat yellow gold heart-shaped catch.
Estate price $1,750.00 CAD. Stock #e14528
Before Rolex became one of the world’s most recognized luxury brands, they were simply one of many high quality Swiss made watch manufacturers. Historically speaking, they were most well know for being very reliable and robust. They were often purchased by professionals who needed a durable watch that could be counted on to be accurate and dependable under all conditions. The familiar look of the classic Oyster bracelet has changed very little in the close to 50 years since this one was made in the mid 1970s. The Submariner or Sea-Dweller it was originally fitted to likely only cost around $300.00 when it was new. Rolex were never inexpensive watches but they’ve certainly changed from being simply a high quality watch to a luxury item. They have done a remarkable job marketing the brand as a lifestyle statement for people who recognize there is a lot more to a Rolex than a high quality mechanical timekeeping tool. Today Rolex produces all the components that go into the production of their watches, but that was not always the case. Almost all the high end Swiss brands purchased various parts from other specialty suppliers. From dials and hands, right through to springs and complete movements, many parts and assemblies were outsourced to other companies. Although this bracelet is stamped “Rolex” in no less than 4 places and the famous Coronet logo another 5 times, it was manufactured by Gay Frères in Switzerland.
Gay Frères produced bracelets and components for other watchmakers such as Heuer, Vacheron Constantin, Patek Philippe, Audemars Piguet, Heuer, and others. They employed over 500 at the height of their production in the 1907s. This all came to an end in the late 1990s when Rolex purchased the company as they became more vertically integrated, freeing themselves from the limitations imposed from outside suppliers. The look of this bracelet may be familiar but this old school design is made completely from stamped sections of stainless steel. Each link is fashioned from 2 separate pieces of sheet stainless that have been folded 6 times under extreme pressure.
Simple, effective, and lightweight, this was how Rolex did things for many years. The hollow centre sections make make a jingling noise that is music to the ears of collectors and those who like their vintage Rolex original looking and sounding. Bracelets back then routinely wore out every 10 years or so and were replaced with newer semi-solid designs secured by heavy and long lasting screws. It is very rare to encounter an original folded link bracelet in the kind of condition our latest estate example is. This bracelet measures 20mm at the lugs and tapers to 15.5mm at the buckle. The last link is stamped with the model number 9315 with 380 end pieces.
This bracelet will fit a vintage 5512, 5513, 1680 Submariner, 1675 GMT-Master, 1665 Sea-Dweller, or a 1655 Explorer II. It measures over 6 3/4 inches in length with 12 links (not including the diver’s extension). Including the watch it should fit a wrist size of up to 8 1/2 inches. If you need an original extra link, they are not too hard to locate online. A first generation screw link from a 93150 Oyster bracelet can easily be fit into these vintage bracelets too.
Its hard to kill a Rolex watch if you service them every 10 years or so; original vintage bracelets are becoming more rare every day. This one was likely taken off decades ago and is ready to be united with your 1970s professional Rolex. $4,000.00 may be a lot of money for a Rolex bracelet that is close to 50 years old, but on the correct watch it adds far more value than that. It is in very good condition and has been refinished at some point. The embossed Coronet Rolex logo still stands off the surface nicely with excellent detail.
There is only a tiny amount of stretch and some sag.
These almost never show up in any condition let alone one this nice. It is estate priced at $4,000.00 CAD. Stock #505-00552.
This is a more cautious and lower maintenance version of a true tension setting, where the diamond would be held in place by the spring force of the band trying to close itself into a complete circle. The problem with actual tension setting comes when you have to size the ring, but that’s more of an us-problem than a you-problem! Let’s just say we are happy to feature this mock tension set ring instead of the real thing! This ring certainly has the effect of a tension setting, displaying almost the entire diamond from both the head-on and the side view. The 0.50 carat round brilliant cut it displays is a pleasant-looking I1-I, showing only one eye-visible feather inclusion, leaving the rest of the diamond to sparkle brightly. The ring itself has been made from top-quality platinum and a lot of it, weighing in at a whopping 11.6 grams. The ring currently measures a finger size 6 with some room to adjust. Estate price $2,310.00 CAD. Stock #101-00277.
It’s art, it’s jewellery, and if the value of gold continues to climb it might also be a decent investment. We just don’t see objects like this very often. Typical jewellery items like rings, necklaces, pendants, and earrings are seen everyday, but brooches are uncommon in any form. I’m very confident in saying, we’ll likely never see another brooch quite like this one again. This curious little bird was hand crafted in Italy by an unknown manufacture. It has been stamped ITALY but we have been unable to decipher the rest of the trade mark.
It tests as 18 karat and has been made to the high standards associated with luxury Italian jewellery. We have to assume it was made when gold was a fraction of what it costs today as it weighs a substantial 26 grams. It is difficult to determine an age as birds have been a popular theme for brooches for 100s of years. We do know that the attention to detail is excellent and the glass enamel work was done by an expert. This isn’t coloured epoxy like you’d find on modern jewellery. Long lasting glass enamel provides a harder surface, with a rainbow of transparent to opaque colour options. The shading and transitions in colour on the feathers are as nice as we’ve seen.
The enamel is in excellent condition with only a tiny section at the top of the wing showing minor chipping and a crack that goes completely unnoticed except under magnification. The brooch is secured by a white gold pin hinge clasp with built it safety clasp. It measures 7.3mm from the tip of its beak to the tip of its tail feathers.
It’s always interesting to determine the actual value of precious metal in a piece of jewellery, while not a definitive measure of value, it is a key component we’re always happy to share with you. The glass enamel likely weighs a few tenths of a gram leaving 25.9 grams of 18 karat gold. At today’s gold price of $3,764.00 CAD, this brooch contains $2,350.00 in just the recyclable gold content plus a few additional dollars in fine silver alloy. Turning $2,350.00 of raw gold into a beautiful piece of jewellery like this takes many hours of expert skill and more additional costs. If this was a brand new item; by the time it found its way to the final consumer it would likely sell for 3 to 4 times its value in gold. The value as an estate item is much much better at less than 1.5 times the gold value. This charming and playful brooch is estate priced at $3,500.00 CAD. Stock #181-00030.
SOLD
This ring looks like a million bucks, well maybe not a million, but at least $10,000.00. The rectangular radiant centre stone measures an impressive 7.18mm long. Framing the centre stone is an outline of round brilliant cut diamonds enhances the top width of the ring to half an inch.
It looks like an antique but it was originally purchased brand new, right here at Bill Le Boeuf Jewellers not even 10 years ago. The pierced scroll shoulders are flanked with more diamond sparkle that has been highlighted with decorative milgrain. The centre diamond comes with the original Gemological Institute of America report (May 2014).
The full report can be seen online here. The eye-clean SI2 clarity assures there are no distracting inclusions that can be seen without magnification. The H colour grade is high on the scale and faces up quite white. Excellent polish, very good symmetry, and no fluorescence round out the quality characteristics of this impressive natural diamond. The 40 accent diamonds are well matched of SI-HI quality. This ring was made in Canada using Canadian gold. It remains in excellent condition showing no areas of wear. Our onsite goldsmiths can adjust the fit up or down a size or two if needed. This ring is estate priced at $4,200.00 CAD. Stock #131-00207.
When you can’t find what you’re looking for, sometimes having it custom made is your only option, but bespoke comes at a premium. With the price of gold, the cost of high quality natural gems, plus the extra labor for designing and making a one off, custom made is much more expensive than production jewellery. Coloured gems are becoming a popular option when it comes to engagement rings.
Lab-grown diamonds are also very popular now but at only a few hundred dollars per carat for really nice ones, they do come off as a cheap and easy way out. This set was custom made for the original owner who loved blue sapphires but still wanted a traditional engagement/wedding ring look. 13 high quality bright cobalt blue sapphire were sourced as the starting point.
The 13 channel set matching princess cut sapphires are far nicer than those inky dark blue commercial grade sapphires you see at most jewellery stores. Theses measure 3mm x 3mm and are estimated to weigh 0.16 carat each. Set at the bottom of each shoulder is a princess cut diamond (4 in total) with an estimated weight of 0.15 carat each and are all of VS-FG quality.
The centre natural diamond measures 6.35mm diameter and is estimated to weigh exactly 1.00 carat of I1 clarity. It exhibits small dispersed crystal inclusions throughout the body that go unnoticed except under tight scrutiny or under magnification.
In our conservative opinion we feel the colour is an excellent EF, the supplied appraisal suggests it is a perfect D colour. We are in consensus that the cut is excellent. The diamond displays an excellent “Hearts & Arrows” pattern when viewed through polarized light. Both rings are well constructed of 14 karat white gold and weigh a combined 12.1 grams in a finger size 8. They can be adjusted up or down only around 1 size. The sapphires show some surface scratches, abrasions, and a few small chips associated with 10 years of wear. The channel settings show a little wear along with the 4 prong centre setting, but the ring is ready to wear for the next decade without any concern. Duplicating a ring like this would be a costly thing. Finding 13 matching high quality sapphires would be difficult and quite expensive. The ring comes with a July 2014 appraisal certificate suggesting a replacement value of $21,800.00.
We think we could duplicate this set for around half of the appraised value, but there is no way we could replicate the set for our estate price of only $6,000.00. If you like these high quality blue sapphires, the striking contrast against the white gold and diamonds, maybe this ring pair is for you. They are sold as a set only for the estate price of $6,000.00 CAD. Stock #101-00606.

Peoples Jewellers certainly pull out all the stops for their Canadian diamonds! This graceful take on a wrap, by-pass style engagement ring is mesmerizing to look at. Using contrasting bands of mirror finished white gold and bead set brilliant diamonds to keep the eye moving towards the crowning center. The raised four prong setting has been positioned slightly askew to finish off the twisting movement. The diamond in the centre is a 0.45 carat certified Canadian diamond of I1-H quality that faces up brightly to the unaided eye. A laser inscribed serial number and mini maple leaf on the girdle declare the patriotic pedigree. Such a well thought out design deserves a band to match and luckily we have it. The wedding ring is designed to complement instead of compete. It’s a delicate curve of diamonds running tightly against the outer edge of the engagement ring.
Added to the bold SI2-I1-HI quality accent diamonds in the engagement ring, the set totals 1.07 carats of diamond weight. The 14 karat white gold matched set weighs a combined 6.5 grams. Each has been equipped with a “speed bump” at the shank base. This allows the rings to pass over a wider knuckle and then snug up against the back of the finger, reducing their tendency to roll during wear. These bumps can be reduced or removed as needed. With the bumps in the set fits like a finger size 4 and can be sized up. Accompanied by the original Peoples box, paperwork, warranty, and certificate of authenticity. The Gem Scan Certificate lists an estimated retail replacement price of $3,325.00 CAD. Original receipt shows a regular price of $2,999.00 and a purchase price of $2,799.00. Our estate price $1,680.00 CAD. Stock #e11273.
SOLD
Marquise shaped diamonds are starting to be rediscovered. 25 years ago they were a very popular choice. When you see one this good it’s easy to understand the attraction. Diamonds of this quality or better represent less than 4% of what’s available on our database. The extra length of a marquise gives the illusion of a much bigger stone than the actual weight suggests. This diamond ring was originally purchased in Amsterdam in 1993 and is described with its certificate as loupe clean of river colour. This means the original vendor felt the diamond was of flawless clarity and perfect colour. We removed the diamond and sent it to GIA for a more internationally recognized report. The finished document revealed a tiny indented natural at one point making this diamond “merely” a VVS1 with a colour of E. Symmetry and polish came in as very good with strong blue fluorescence when exposed to long wave ultraviolet light. GIA report number 2165031879 can be verified online here. A simple 18 karat yellow gold setting weighing 4.0 grams secures this diamond along with 12 high quality graduated baguette cut diamonds. Estate priced at $16,500.00 CAD. Stock #e8067.
Diamond sold, setting still available.
Most “gold coins” are alloyed with other metals making them more durable and long lasting once they get into general circulation. That’s makes sense in principle but when was the last time you saw a gold coin in circulation with regular currency? Truth is, since the advent of paper money, gold coins never go into circulation for face value. With the price of gold around $4,100.00 CAD per ounce, the face value of gold coins can be close to 100 times less than than their gold content. Any gold coin alloyed with other metals making them less than 99.9% pure are subject to sales tax when purchased in Canada. 99.9% pure gold coins like these Chinese pandas are seldom encountered by us. They are usually traded among collectors and purchased as investments. Only a handful of countries produce coins of such purity and these coins never go into general circulation for their face value. Bullion coins like these can legally be purchased in Canada tax free, no sales tax is added to the price. The Canada revenue agency looks upon the sale of fine gold and other precious metals as a financial transaction therefor not subject to sales tax. These 2 coins are being as pair only.
They are for sale for only the intrinsic value of the gold they contain plus 2%. They are heavily handled with scuffs, scratches, dings, and dents. You can bang them up but they’ll always be worth their weight in gold no matter the condition, as long as they each weigh 1/20th of an ounce (1.555 grams). These don’t come in very often and never in significant quantities. At current gold pricing of approximately $4,100.00 per ounce Canadian these coins are selling for $410.00 for the pair plus 2%. They are very cute, each with a depiction of the lovable panda. For credit card purchases please add an additional 2% service fee. Estate priced at gold value only plus 2%. Stock #912-00664.
SOLD
Oval diamonds are certainly having a moment (more like a year) and it’s not hard to understand why. Though they don’t offer the unrivaled sparkle of an excellent cut round brilliant diamond, they make up for it with footprint. This 0.74 carat oval measures an impressive 8.31mm long. Part of that length comes from the narrow nature of this particular oval, as it spans only 4.58mm wide.
Though skinny (and we here at Bill Le Boeuf Jewellers believe strongly in shape-positivity) the diamond certainly packs a punch with a pleasant SI2 clarity and an I colour that is whitened by the contrasting warm 18 karat yellow gold of the shoulders.
The 4.2 gram ring is solidly constructed and currently measures a finger size 6 1/2 with plenty of room to adjust. Estate price $2,380.00 CAD. Stock #101-00249.
The nature and subject matter of jewellery means the varieties and combinations of styles are pretty much infinite. Even an item as simple as a cross pendant can be expressed 1000s of ways. Our large and ever-changing selection of estate crosses always has something new to display your faith. Our latest Italian-made cross takes inspiration from the most basic concept. Just a horizontal and vertical rectangle overlapped. The sheer simplicity of the design conveys the message without any extra details. No fancy hand engraving or sparkling gems, just premium 18 karat yellow gold and highly polished flat surfaces. Despite the fact the pendant is hollow, it still weighs in at a hefty 7.6 grams. A large circular jumpring will accommodate an equally proportioned cord or chain necklace. Perfect condition, showing no signs of use. This cross pendant is estate priced at $910.00 CAD. Stock #436-00156.
SOLD
Lots of gold chain and necklaces pass through our estate department without ever being showcased on our website. Gold necklaces are one of our most popular items and it isn’t surprising. They are always in excellent like new condition and show no wear of previous signs of repair and are very competitively priced. If we get one that is in less than very good condition or one that has been stretched or repaired before, we have no regrets recycling it for gold salvage. This example would normally not be profiled as it is a typical example of something we always have an example or two around here and they turn over regularity.
What makes this one more interesting is the clever “Push-Lock” clasp. A common spring ring or lobster clasp uses a pull to release spring loaded trigger. This one is still spring loaded but it features a push to release recessed trigger that is impossible be accidentally open. To release the fastener you must depress the trigger with your fingernail while passing the chain end through the opening. There is a sturdy spring captured within the component keeping the well engineered clasp closed. This novel idea is registered and patent protected from copycat designs.
We understand why this necklace was treated to such a clasp, the solid link design weighs in at 37.1 grams. As of today (Dec. 17, 2024) this necklace contains $2,630.00 CAD in just its recyclable gold content. The Italian made Figaro link design measures 20 1/2 inches long and 6.25mm wide.
It shows some impact marks on the polished sections but no wear between the links. Chains like this can be worn for many decades, maybe even a lifetime if kept clean. They are suitable for man or woman and can be used with or without a pendant. This chain is estate priced at $4,710.00 CAD. Stock #431-00902.
SOLD
Tiffany & Co’s Atlas Collection was inspired by their Atlas clock that has been ticking along since 1853. The 20-foot tall cast iron figure and clock have adorned their flagship storefront as an iconic New York landmark. For this collection, they’ve pulled the clock’s shape and Roman numerals. This retired pair of 18 karat white gold hoops accent those high polished numerals with rows of top-quality round brilliant cut diamonds. The earrings feature 180 diamonds together, adding up to a 0.70 carats total weight. The 3/4 inch earrings are equipped with sturdy posts and locking button-release backs.
They are accompanied by their original box and travel pouch. The estate price is $4350.00 CAD. Stock #151-00164.
The Northern Spirit diamond is a classic case of reinventing the wheel. The round brilliant cut diamond was invented by an optical physicist mathematician named Marcel Tolkowsky in 1919. He came from a long line of diamond cutters and designed the round brilliant by analyzing diamonds ability to refract light and to split white light into rainbow spectral light. His cut was the basis of the modern round brilliant which is in fact the only cut on the market with GIA industry standard dimensions, ratios, and facet angles. Meaning that the round brilliant cut diamond is the only cut that can be assigned a GIA cut grade. Doubling the number of facets as this 106 facet round Northern Spirit diamond isn’t really an improvement it just breaks up the same amount of sparkle into smaller pieces. But it certainly makes for a splintered brilliance that you don’t get with 58 facets. That busier pattern does a great job of disguising the grade setting inclusions in this I1-G 0.51ct Canadian diamond. The diamond is accented with additional hidden diamonds set into decorative north stars. The engagement ring has been soldered to its complimentary diamond wedding band that tucks around that star so it is always visible.
The set is equipped with extra comfortable European shanks and together the weigh in at 4.5 grams of bright white 14 karat gold. The accent diamonds combine for an additional 0.06 carats of sparkle. If you’d prefer the set be separated or sized it can be accomplished in a day or two by one of our on site goldsmiths. The certificate package states an optimistic replacement value of $3965.00 CAD (just for the engagement ring). We feel a more appropriate replacement value is $2400.00 (for the 2 piece set). Comes complete with the original Ben Moss Jewellers box. Our estate price for the Canadian set $1,680.00 CAD. Stock #e12486.
One of our favourite shapes for accent diamonds are showing off their wall to wall splintery brilliance in this engagement ring! The 14 tapered baguette cut diamonds make such a calm statement surrounded by high polished rhodium enhanced white gold. They draw the eye to the diamond intersecting the ring, a 0.30 carat round brilliant cut of VVS2-K quality. Its excellent cut promotes superb brilliance and helps make it appear larger than its 4.4mm diameter would suggest. The centre diamond and baguettes combine to weigh an estimated 0.43 carats of total weight. The 3.4 gram ring is in brand new condition and currently measures a finger size six with a bit of room to adjust. It comes with its original Gem Scan appraisal stating a replacement value of $2,450.00.
This ring quite possibly could be unworn; its condition is absolutely perfect without a scuff or scratch. Our price for the pre-owned diamond ring is just $750.00 CAD. Stock #e12857.
This unique engagement ring would have been custom-made for the original owner, as evident from its heavy gauge and minute imperfections. Not to say it’s bulky, the 5.9mm wide shoulders have been left open to keep an airy and feminine feel. Adding to that is the delicate rows of petite round brilliant cut diamonds that loop across both shoulders. The knot to their bow is a bright 0.40 carat SI2-I1-IJ round brilliant cut diamond, bringing the total weight of the ring to 0.60 carats. The 5.6 gram 14 karat white gold ring currently measures a finger size 6 1/2 with some room to adjust. Estate price $1,400.00 CAD. Stock #e13114.
People sometimes ask us, “what’s the point of black diamonds” and we get it. They offer no transparency and zero dispersion because they are totally opaque. What they do offer is exception hardness allowing cutters to facet edges sharper than any other gem, plus superior reflectivity characteristics that makes them look like highly polished black metal, but metal that is virtually impossible to scratch and always keeps a perfect edge.
Our newest estate offering contains 112 round brilliant cut black diamonds. Even though they are totally non transparent they have still been fully faceted with 57 individual cuts on each stone. The labor for cutting 6384 unique facets just for the black diamonds used in this piece is substantial. There are 30 additional white diamonds providing sparkling contrast, brilliance and dispersion.
The white and black contrast and rectangular shape of this ribbon pendant gives it an Art Deco design inspiration. This large pendant measures 35.mm X 21.5mm and weighs a significant 7.7 grams.
The oversized loops on the back allow use with pretty much any necklace, cord, or ribbon.
A black and white rhodium plating has been applied to the surface of the white gold further enhancing the bold striped effect. The pendant shows no wear and remains in like new condition. Estate priced at $2,160.00 CAD Stock #161-00351.
If you wanted to collect every colour in the rainbow using only one variety of gem, sapphires are your best bet. Sapphires occur naturally in the full spectrum of colours. Blue is the hue most people associate with this durable gem, but it can be found in vibrant shades of orange, yellow, green, violet, pink and everything in between. When they form red they are called Ruby, but it wouldn’t be incorrect to describe a ruby as a red sapphire. Sometimes they can be found displaying a pinkish/orange colour, in this form they are called Padparadscha. Sapphires owe their different colours to various trace amounts of common to rare elements that alter their colour. The most pure form of sapphire that is completely absent of contaminating elements is colourless like a perfect white diamond. The pink hue of our latest estate ring is caused by a tiny amount of chromium held within the crystal.
The more chromium the darker the pink until it becomes red and is now referred to a a ruby. This cushion shaped example has been cautiously estimated to weigh 1.00 carat. The November 2004 appraisal estimated the weight at 1.25 carats. The sapphire has be set in a custom made 14 karat white gold setting containing 42 bead set natural diamonds of SI-H quality (0.50 carats total weight). The ring measures just over a size 6 and can be adjusted up or down from there.
Crafted from 14 karat white gold the finished ring weighs 3.7 grams. The ring is in excellent condition showing only light scuffs and scratches on the polished sections of the shank. It comes with a 20 year old appraisal by Jewellery Appraisal Services Inc. Toronto. This one of a kind custom made ring is estate priced at $1,500.00 CAD. Stock #206-00589.
Montreal based designer goldsmith Thomas Alt’s German heritage is certainly apparent in these hand made earrings. The custom cut onyx that decorate each section are the epitome of Idar-Oberstein design of the 1980s. Their mix of matte and high polished faces with step cut geometry allow these unique stones to be surprisingly on point with today’s fashion. Especially the yellow gold hexagon tops with their low profile and earlobe covering 11.6mm width. Being that we have such a soft spot for 80s fashion we couldn’t bring ourselves to fully modernize the earrings. The 14 karat yellow gold studs are in their original non-pierced form and we’ve added french backs to the 14 karat white gold drops. Those trendy triangles measure 18.4mm long and 20.1mm wide. The triangles are topped with 18 hand set round brilliant cut diamonds of a very nice VS-GH quality. The 0.36 carats are a very good to excellent cut grade. They throw a ton of sparkle and contrast to the mostly matte finish of the black onyx. If you too are an 80s enthusiast we can quickly convert them back to a two tone dangling pair. If however you don’t appreciate retro glam than you can take them as is with a two-for-the-price-of-one value.
For an additional $150.oo including heavyweight friction backs either pair can be converted to conventional studs; upping the modern motif by raising the earrings to the center of the earlobe. The pair in their original form are accompanied by a 1992 Certificate of Appraisal with a Retail value listed at $2,050.00 CAD. Our estate price for the two pair are $1,190.00 CAD. Stock #e11338 211-00018.
The gift giving season is fast approaching and brand name jewellery at a great price is always a popular choice. Roberto Coin has a reputation for high quality, beautifully designed jewellery made in Italy. This 7mm wide two-tone bracelet an interesting take on a simple design. Instead of oval or round links, if has been created using navette shaped sections.
The sharper ends and inner sections keep the links much closer together resulting in an overlapping appearance. A tight hinged clasp features the signature lab-grown ruby as a trigger to release the catch. The slightly larger clasp link turns it from a functional necessity into a focal point for the bracelet.
The standard Roberto Coin trademarks are clearly visible on the inside of one of the links.
The bracelet measures 7 1/2 inches long, but wears a little shorter due to the width. Showing very little wear on the hard rhodium finish and zero stretch in the solid links. Estate priced at $2,000.00 CAD. Stock #241-00097.
SOLD
A traditional solitaire engagement ring from Canadian Jewellery store chain Charm Diamond Centres. The Glacier Fire brand is their go-to line of Canadian diamonds that happens to come in a chic black box in red trim. The diamond is laser inscribed as proof of pedigree and its paperwork states a weight of 0.52 carats of I1-H quality. This particular Canadian diamond came from the Diavik Mine in the Northwest Territories. The 14 karat white gold that carries the diamond is all flat mirror finished planes widening as the reach the center to move the eye in.
Hardly worn and still sporting the original factory applied rhodium plating. Currently the ring measures a finger size 6 1/2 with room to adjust. The ring is currently listed on Charm’s website for $2,499.00 CAD. Our price $1,400.00 CAD. Stock #e12794.
On paper, this diamond is far from perfect, but that doesn’t mean it doesn’t sparkle or is attractive. We’ll be the first to admit there are a couple of white feather type inclusions that can be seen without magnification. The rest of the diamond has very good transparency, brilliance, and dispersion. We imagine a diamond like this will eventually end up in a pendant or paired with another diamond of similar quality in a pair of earrings. The strong G colour ensures it has no tint of yellow or brown. It’s bright, it’s white, it sparkles as a diamond should, and it has excellent value at the estate price of just $1,000.00 CAD. Stock #e14047 191-00027
Here’s a fearsome looking gents ring. This proud lion ring was recently modified by us to showcase a very nice half carat SI1-H round brilliant cut diamond set between the jaws of the apex predator. The ring itself is very well made in 10 karat yellow gold weighing 18.6 grams. The large size 11 gents ring can be adjust up or down a couple of sizes by one of our onsite goldsmiths. Two good quality 0.03 carat bead set diamonds are in his eyes add a deceptive twinkle to the lethal gaze.
This is a large ring that measures 1 inch at the widest point. There are no manufactures trademarks stamped inside the shank. We think there is a good chance this is a one of a king hand made ring. This estate diamond lion ring is priced at $2,450.00 CAD. Stock #116-00078.

With one measuring 8 inches long and the other measuring 6 inches this set may have been intended as a parent-child combo, or for a couple consisting of one very petite partner! Both are made from top-quality 18-karat yellow gold and feature solid high-polished engravable disks, one measuring 36mm long by 8.4mm wide, the other measuring 25.5mm long by 4.3mm wide.
Both are equipped with heavy-gauge hollow Cuban link chains ending in spring ring catches. Sold separately and awaiting your engraving instructions for $1,450.00 CAD (larger bracelet) and $350.00 CAD (smaller bracelet). Stock numbers 441-00233 and 441-00232 respectively.
SOLD
The normal alloy mix that turns extra-warm yellow gold into this frankly unnatural white colour is nickel. The white metal lends its colour in brightening up gold and also offers workability and durability to the mix. But for some people, nickel can cause skin irritation resulting in a persistent rash where the metal touches the skin. One solution for this allergy is nickel-free palladium alloyed white gold. The advantage of the palladium alloy is that it actually makes a whiter white gold than the nickel alloy, making this 18 karat white gold ring much whiter than you’d expect. The ring has been crowned with a 0.35 carat princess cut Canadian diamond of bright SI1-G quality.
It’s shouldered with graduated channels of smaller princess cut diamonds of matching quality. Those diamonds top the rings total carat weight up to 0.75 carats total weight. The ring currently measures a finger size 4 with some room to adjust. Estate price $1,150.00 CAD. Stock #e14393.
A three diamond ring with a past, present, future, symbolism is a timeless option for an anniversary or engagement ring. This particular one is made even more timeless consisting of both 14 karat white and yellow gold in the classic double gallery four prong setting style. The wide flat 3.4mm band weighs 3.6 grams and should be durable enough to last a lifetime. It features three shining I1-J round brilliant cut diamonds for a total estimated weight of 0.87 carats that will always remind her of where you’ve been together, and where you are going. Currently a finger size 5 1/4 the ring can easily be sized up or down. It’s a lot of ring and an outstanding value for the estate price of $1,380.00 CAD. Stock #e9697.
Pilots have always considered wristwatches as more of an instrument or tool than an accessory. A quality wristwatch can be used to calculate flight time, air speed, or even distance, therefore the quest for a more precise and more accurate wristwatch was not only just a personal preference but a necessity. Heralded as one of the most advanced chronographs on the market, the first Breitling Aerospace was released in 1985 under the Navitimer moniker.
Although there were a few Anadigi (watch with both analog and digital displays) models on the market it was unusual for a LCD watch to have a polarization-sensitive dichroic filter. This enabled the LCD to display time in “inverted mode” which meant “gold” text with a dark background.
The 42mm case as the original model is made of high grade titanium which is a metal commonly used in aviation for its strength and lightweight.
This watch’s single push crown design and digital display allow the wearer to view the alarm, second time zone, date, countdown timer, and chronograph functions without having to switch from viewing the analog time. The Minute Repetition function, with a series of chimes, allows the wearer to know the time with a push of a button and without having to even look at the watch, the backlit function of the digital display is not functioning.
This one-owner watch is in very good condition showing only small scratches and scuffs on the case and bracelet. The full-length bracelet shows very little sag.
It comes complete with the original inner/outer box, instructions, and chronometer certificate. Including a 1 year Bill Le Boeuf Jewellers warranty. Model E79362 is estate priced at $3,000.00 CAD. Stock #515-00078.

What you don’t see a lot of is yellow gold halos, as yellow gold was rather out of favor when halos were at their peak of popularity about 6 years ago. It’s a good thing yellow gold is cool again because it really works with a halo! The softer hue blends nicely into most skin tones making the metal a subtle accent. The accent diamonds end up having more room to shine as they aren’t competing with bright chromy white gold. The one advantage to a white gold halo is that it blurs the line between the main diamond and the accents, giving the main diamond the appearance of a larger diameter. This wedding set happens to also feature that optical illusion with the interior halo done in white gold.
The round brilliant cut diamond at the center of this thoughtful ring is a nice 0.40 carat of lovely SI1-D quality. The rest of the wedding set is adorned with 40 petite diamonds equalling 0.40 carats together. The custom-made 14 karat set currently measures a size 4 with a bit of room to adjust. Sold together for the estate price of $2,800.00 CAD. Stock Number e14357 #101-00071.
Diamond dinner rings are always a treat to showcase, especially the lace-inspired styles like this 7mm wide version. Made from 5.0 grams of brightly rhodium plated 14 karat white gold and accented all over with frosty millgrain. The open trellis center features a repeating pattern of round and diamond-shaped settings connecting on either side to the bead set rows of diamonds.
The ring only leaves its bottom quarter plain for future sizing. The rest of the ring has been set with 0.85 carats total weight of VS-SI-GH petite round brilliant cut diamonds. The ring is accompanied by its original appraisal and currently measures a finger size 5 1/4 with a bit of room to adjust. Estate price $2,100.00 CAD. Stock #e13939.
Placier gold is what comes to mind when you picture an old timer prospector panning in a mountain river or stream. This is the sort of gold that has broken away from its original source and been transported over time by erosion and swift flowing water. Often these oatmeal shaped nuggets travel a good distance downstream. They are pummeled by rocks and gravel on their journey giving them these classic shapes. They eventually settle in nooks and crevasses until the relentless affects of erosion send them downriver again. We seen this sort of nugget gold before come in from the actual prospectors who found them. Judging from the vintage glass bottle, with carboard seal, and what we believe to be a bakelite lid, these nuggets were likely placed inside sometime around the 1940s.
Placier nuggets like these usually contain around 95% pure gold with small amount silver, copper, and trace amounts of other metals. These curiosities can be used in their natural form as decoration on rings, pendants and other jewellery. We’ve decided to leave them as they were sold to us. They make an interesting conversation item for someone who is interested in precious metals. The 14 nuggets weight 1.79 grams or 0.0575 troy ounces. At today’s price for pure gold of $4,106 CAD (Feb. 5, 2024) this small amount of gold contains $225.00 in gold value. Sure we could simply refine these nuggets with other jewellery not longer suitable for use, but we’d like to leave them original for someone to make into a custom jewellery item, or just keep them in the vial. They are many millions of years old and beautiful natural objects. Bottle and gold are estate priced at $235.00 CAD. Stock #913-00056.
SOLD
If you owned a diamond a century ago you were definitely in the minority. Diamonds were scarce, expensive, and very few people had any extra money for such luxuries. Fast forward 100 years and almost everyone owns a piece of diamond jewellery. As commonplace as diamonds are today, a diamond such as this turns heads today just like it did in the early part of the 20th century. Any 2.00 carat diamond gets our attention, but seeing an antique diamond of this quality is an exceptionally rare treat.
Add to that this one is pear-shaped makes it almost irreplaceable. Our database of loose diamonds contains close to 350,000 stones; only 8 are antique, this size or larger with the same or better quality, and none are pear-shaped. This diamond is more than likely a one-in-a-million example. Any diamond of this quality deserves a reliable report. We sent the diamond to the Gemological Institute of America in New York for their opinion of quality. We are excited to say the GIA reported the clarity to be VS2, with only one small dark crystal inclusion within a bezel facet. The tiny inclusion can be seen in every one of these photos. It is located close to the edge of the stone within a kite-shaped bezel facet.
GIA graded the colour with an outstanding grade of E. This diamond also exhibits the desirable characteristic of displaying no fluorescence. Good polish and good symmetry are just about the most you can expect from an antique cut such as this. The full December 2021 GIA report can be confirmed online here. The diamond is currently loose, waiting for you to turn it into a remarkable engagement ring, glamourous pendant, or anything else you can dream up.
Click here to see a 30-second video of the diamond. The 20 gram platinum pendant the large diamond originally came from is available for an additional $10,000.00. The pendant itself is quite significant and contains an additional 73 antique diamonds estimated to weigh 10.12 carats in total, averaging a conservative VS-SI-H quality. Stock #e14541 161-00126.

Diamond sold, pendant is still available.
It’s a difficult thing to access the value a prestigious brand name brings to a product. Especially a diamond ring or other piece of jewellery. Even when comparing two otherwise completely identical items, the premium brand product sells for more and deserves the extra value associated with the brand. A sterling silver chain from Tiffany for example sells for much more than a high quality silver chain purchased at your local home town jeweller even if the only difference is where it was bought and the box colour. The components that go into producing the item may be the same but where you buy them is a major contributor to the price you ultimately are going to be charged. This beautiful 18 karat white gold estate engagement ring was originally purchased at Royal de Versailles. They are considered one of the finest jewellers and carry all the exclusive luxury names. They operate a big beautiful store in a very exclusive and expensive area of downtown Toronto. When purchased new in 1993 RDV supplied an insurance document outlining the details of the engagement ring, suggesting insurance coverage of $20,500.00 CAD including tax.
25 years later as an excellent condition estate ring we have it priced at only $12,000.00 CAD (including a custom made matching wedding ring).
The centre diamond is a very pretty 1.26 carat VS1 clarity, “I” colour diamond that has been graded by The Gemological Institute of America. GIA certificate #8404049 reports the diamond has been manufactured with very good polish, good symmetry and strong blue fluorescence. This diamond is proportioned with a very flattering, slender 1.78:1 length to width ratio. Our quarter million strong diamond database shows less than 4% of all pear shaped diamonds have a ratio like this or thinner. Almost all diamond cutters choose to make their pears closer to 1:1.40 ratio. While this ratio is efficient for weight retention the resulting plump outline doesn’t look nearly as sophisticated. Securely set on each shoulder is an additional pear shaped diamond, each estimated to weight 0.20 carats of VS-SI clarity and H colour.
The rings fit together with puzzle piece precision and measure the average finger size of 6. One of our onsite goldsmiths can custom fit these up or down as required in just a day or 2. Included with the rings is the original black RDV box plus an independent Harold Weinstein appraisal from October 1998. Our estate price for the set is $12,000.00 CAD. Stock #e11081.
You’ve probably seen the paperclip/elongated link necklace everywhere this past year, if you can’t picture it just imagine this link but elongated and thinned out a little. We really don’t know where it came from but the trend has spread like wildfire. If you want to hop on the bandwagon but want to be subtle about it this heavy cable link bracelet is a nice nod. Even better, if you’re simply looking for a high-quality bracelet this is the one. It measures 7.5 inches long but manages to weigh in at a hefty 13.6 grams. The 4.9mm wide links have been beveled to add an extra bit of shine and the bracelet has been equipped with an oversized 10 karat spring-ring catch for easy fastening. The 14 karat yellow gold bracelet is in like-new condition for the estate price of $1,750.00 CAD. Stock #441-00154.
This ring is not just digit-dominating, it’s hand-dominating! Not simply for its 11.2mm x 22.6mm footprint but the combination of lush green emerald, clean white diamonds, and bands of warm yellow gold. The ring’s crown is a natural emerald-cut emerald weighing approximately 3.20 carats, of intense emerald-green colour, showing the typical eye-visible Jardin you’d expect from the stone of springtime. The rows of high-quality VS-H baguette-cut diamonds turn to waterfalls as they tip down the steep shoulders of the ring.
The belt of flush set round brilliant cuts bring the total diamond weight to 1.28 carats. With all of these fantastic ingredients, you can probably guess that this ring was indeed custom-made.
The 10.6 gram 14 karat yellow gold ring currently measures a finger size 5 with a bit of room to adjust. Estate price $3,360.00 CAD. Stock #e14270.
This wedding set contains a hidden detail for the wearer’s eye only, two tiny natural blue sapphires tucked into the base of the main setting, one on each side.
Sapphires were traditionally the gemstone for engagement as they symbolize faithfulness and constancy. Diamond on the other hand was considered an evening stone, wearing one during the day was considered garish. It wasn’t until the 1920s and 1930s that diamonds became the standard center for an engagement ring.
The diamond at the center of this engagement ring is a 0.70 carat I1-IJ quality round brilliant cut, showing almost eye-clean thanks to a collection of tiny inclusions instead of one large grade-setting inclusion.
The additional 119 diamonds add their estimated 2.00 carats total weight to the top and sides of both the engagement ring and wedding band, all of SI-I quality.
The rings are well-built from 8.8 grams of 14 karat white gold and currently measure a finger size 6 with some room to adjust. The set is accompanied by a September 2013 EGL USA certificate stating a fantastical replacement value of $11,050.00 CAD.
We feel a more competitive replacement value with new would be around $6,500.00, our estate price is $4,550.00 CAD making for an excellent value. Stock #101-00402.
You can tell this is some sort of Tudor or Rolex product but there is something different about this. Magnifying bubble over the date, stick hand/hour markers, engine turned bezel, prominent threaded crown are all familiar features on Tudor and Rolex watches. Rolex is perhaps the most cautious and conservative of any luxury Swiss watch manufacturer. Rolex styles transcend time and generations. When it comes to testing the style waters, Tudor is a little braver than the parent company. This integrated bracelet/case design was a common theme in the 1970s. Even when this was a current style, the traditional lug Oyster case was far more popular. These unusual Tudors are seeing renewed interest from collectors and people looking for something a little different.
Our latest estate watch is the Tudor Price OysterDate model 9101/0. This rare watch measures a generous (by Rolex/Tudor standards) 38.2mm in diameter. Despite there only being 9 links in the integrated bracelet, it will accommodate a wrist size of up to 8 inches. This watch is really a time capsule from the 1970s. It is a one-owner example in original condition. It has never been polished to our knowledge and was only worn occasionally, as the owner felt it was a little too large for daily use. He eventually completely stopped wearing it sometime in the late 1980s. We can confirm this history because besides our recent service etching inside the case-back, there is only one other record of service and it was from Rolex in 1978.
We couldn’t find another example of this rare model on the market that is anywhere near as complete as this one. It comes with an excellent condition original box with bright red, gold-trimmed liner.
The endorsed warranty papers are dated June 16, 1977, from Birks in Sudbury Ontario. Guarantee documents with pink translation papers are in perfect condition along with the operating instructions. The package even contains a red plastic folder with transparent document sleeves.
The 25 jewel ETA calibre 2784 is functioning like new (perhaps better) as our Vibrograf report shows an accuracy rate of only 2 seconds fast per day.
Our March 2021 overhaul revealed no issues with the movement other than it was quite dry and needed a thorough cleaning.
There is evidence of use common to a watch only a year or two in age. For a watch that is well over 40 years old, the condition is remarkable. The stainless steel bracelet shows no stretch and just a touch more of sag than it did when the watch was presented as a gift from the original owner’s wife back in the summer spring of 1977.
The classic silver dial remains blemish-free.
The tritium-enhanced hands and hour plots are perfectly matched and complete. It’s rare to see hands where the tritium isn’t cracked or has missing sections. These are as good as they get.
This is the first example of an integrated bracelet Tudor Prince OysterDate we’ve ever had and it is a marvelous example. Freshly serviced, ready to turn heads and prompt conversation from hardcore watch nerds to the casual observer. This small slice of 1970s nostalgia and Tudor history is estate priced at $4,800.00 CAD. Stock number #505-00038.
Puffed Gucci link necklaces don’t get much better than this one. It is quite long at 30 inches, long enough to fit around a slender lady’s neck twice.
As an option you could cut out 7 inches, make a matching bracelet and still have a long length necklace. The small oval connecting links can be used with the clasp to shorten the length to a custom length for any neckline or outfit. It measures 7.7mm wide and weighs just under 50 grams (1.6 Troy ounces).
While not solid, it is among the heaviest gauges available, it feels solid and only under scrutiny and magnification can you see the seams where assembled. Gold is still on an upward price trajectory currently priced at $5,575.00 CAD (Oct. 9, 2025). At that price this necklace contains over $5,200.00 in just recyclable gold content, not to mention the value of the fine silver alloy value. This necklace is in excellent condition showing no wear on any of the oval puffed sections or solid connecting links. The necklace is secured by a large 8mm ring clasp with a sturdy spring loaded release trigger.
Estate priced at $6,750.00 CAD. Stock #431-00897.
SOLD
At the height of halo-mania about 5 years ago we were having a blast showcasing what we called “super halos”; oversized halo engagement rings covered over with sparkly accent diamonds and crowned by large center diamonds. This belated entry to the league of super halos certainly deserves its place. Its top has been patterned after a celestial body with its concentric halos spaced like the rings of Saturn.
They span an impressive total width of 13.35mm and the diamond they encircle is a 1.01 carat round brilliant cut of pleasant I1-G quality, with small galaxy-like inclusions (not to drive this simile too far) that keep the diamond mostly eye-clean.
The rest of the ring has been hand-set with 64 petite round brilliant cut diamonds of bright VS-SI-GH quality, tipping the ring’s total weight into 1.51 carats. The 14 karat engagement ring is solidly constructed and currently measures a finger size 6 with some room to adjust. The ring is accompanied by its original GS Laboratories certificate stating a slightly optimistic replacement value of $10,000.00 CAD.
We feel a more competitive replacement price is $6,300.00 and our estate price is $4,410.00 CAD. Stock #101-00330.
SOLD
This style always makes me think of those frilly white Ruff collars from 16th and 17th-century paintings. Apparently at their most extreme ruffs were more than a foot in diameter and had to be supported by wire cages! This diamond ruff only spans 9mm and has swapped its lace for tiny baguette and round brilliant cut diamonds. The collar’s undergallery has even been patterned in a way that resembles the figure-eight folds of later ruffs. Instead of the stony visage of Queen Elizabeth I, this ruff centers around a 0.20 carat I1-H round brilliant cut diamond. The 14 karat white gold engagement ring features 0.41 carats of diamond in all and comes with its original certificate and contoured wedding band.
The two were never worn together as the engagement ring measures a finger size 5 1/4 and the band measures a stock size 7, both with room to adjust. Estate price for the set only $840.00 CAD. Stock #e14194.
The nature of rope chains allows them to patina over time in a way that other chains do not. Only their outermost edges make contact with the skin, keeping them in their high polished state. The inner part of the weave darkens over time adding depth and richness to the rope. This 4.4mm wide by 20-inch long rope chain shows the beginning of that patina and features sturdy end caps and a large lobster clasp. Estate price $1,500.00 CAD. Stock E14485 #431-00250.
SOLD
4 digit model number Rolex watches from the 1950s do not show up very often, in fact, they almost never show up. The 1950s were a time when Rolex really began to establish itself as a high-quality do it all watch manufacturer that could stand up to the demands of the modern 20th century. The demographics of the 1950s presented Rolex with the perfect opportunity to take advantage of middle-class disposable income. Jobs and money were plentiful; this watch likely cost less than 2 weeks of wages at the time. Rolex was establishing a vast dealer network across North America looking to grab a piece of the action. This Rolex Oyster looks much more modern than the mid-50s thanks to its more modern service dial and hour/minute hands. The nifty blued steel seconds hand offers a clue to its true age.
This watch likely originally was delivered with an Explorer type dial. The original dial was likely exchanged for this more modern silver with a radial finish and classic 18 karat white gold stick hour markers. The watch is powered by what appears to be the original calibre A296-775 Rolex automatic winding mechanism that is running strong and keeping good time.
Semi bubble back case Rolex watches in 36mm sizes are much harder to come across than the common 34mm size. The original Oyster case is in excellent condition showing very little pitting as is common on early steel Rolex watches. The original engraved serial/style numbers are clearly visible after the American made Jubilee bracelet is removed.
Instead of reading REGISTERED DESIGN, this case says BREVET, derived from the french word for patent. It’s remarkable to us that a 66-year-old watch can look so contemporary, but such is the Rolex style. 6 months, 6 years, or 66 years old, a Rolex Oyster is always in style. The loose link Jubilee bracelet allows a super comfortable fit for a wrist size of up to 7 3/4 inches. The famous Rolex coronet buckle still displays good relief.
Looking at current Rolex watches, a similar 36mm model is still available although only with the more sporty Oyster style bracelet. The current version of this watch can be seen on the Rolex website for $7,200.00 CAD. Including a complimentary 1-year Bill Le Boeuf Jewellers warranty the watch is estate priced at $7,500.00 CAD. Stock #e11990.
Hollow is the name of the game when it comes to statement-making hoops, opt for solid and you’d be feeling it! This pair of 30mm x 21mm 10 karat yellow gold hoops are as interesting viewed from the front as they are from the side.
The pair still weigh in at a substantial 4.9 grams and display only one minor ding that is only noticeable under close scrutiny. Estate price $368.00 CAD. Stock #426-00219.
Over the past couple decades white gold rings have been more popular than yellow gold, but when it comes to decent weight chains, yellow gold outsells white by at least 50 to 1. It is very rare for us to sell a white gold chain unless it is lightweight with a pendant. Standalone necklaces are pretty much always bought in yellow gold. When it comes to popular yellow gold design the paper clip style is still one of the most popular.
This pair are close to identical, so it made sense to post them together. The layer look is very in and these go great together. One is 16 inches long and the other is 16 1/2 offering just enough difference to be noticed. The large open link design allows you the customize the length by fitting the oversized lobster clasps to any link you wish.
One measures 4.2mm wide and the other is 4.6mm. They are expertly crafted in Italy using heavy gauge hollow tubing.
The more we see less expensive jewellery imported from other regions, the more we appreciate the superior fit and finish of Italian manufactured.
These necklaces are in excellent condition and weigh 6.3 and 8.3 grams. They can be purchased as a set or individually for $858.00 and $1,120.00 CAD. Stock #431-00896 & 431-00895.
There is a great debate raging in this industry about whether pink sapphires exist or not. The argument is that corundum (the mineral that both sapphire and ruby spring from) without the presence of chromium is sapphire and with the presence of chromium is ruby (chromium being responsible for the red colour). As pink is just a weakly saturated red, pink sapphire is arguably just a weakly saturated ruby. If we look at these gems simply as pale rubies they should be very inexpensive, but if we look at pink as its own class of colour, ranging from intense pink to a light blush, then the gem can fetch similar pricing to other colours of sapphire. Personally, we believe in pink sapphire and recognise that there are good and bad examples of this gem. The baby-pink oval sapphires in these earrings are a lovely soft colour and have high clarity, coming together for an approximate total weight of 4.20 carats.
They’re accented by petite SI-GH quality round brilliant cut diamonds adding their 0.42 carat total weight to the impressive earrings. All told the gems span 20.7mm long by 8.3mm wide, backed by bright rhodium plated 14 karat white gold. The earrings are secured by sturdy posts and springy Omega backs. Our estate price is $1,800.00, CAD. Stock #211-00108.
SOLD
Many people only consider custom making a piece of jewellery when shopping for a unique engagement ring or wedding band, but custom work can be any number of pieces. Some of the most rewarding pieces we make start with a customer’s simple sketch on a scrap of paper. As our customers are not professionally trained jewellery illustrators the sketch rarely reflects the image they see in their heads. Our goldsmiths and designers work with them to flush out their design and the results are just as thrilling for us as they are for our customer. This 60.0mm long by 38.6mm wide Celtic inspired cross was a spare in a series we made and was subsequently traded back making it a brand new, never worn addition to our estate department. A welcome addition as the 7.6 gram 14 karat yellow gold cross is very well made (if we do say so ourselves), equipped with a substantial bale strong enough to last a lifetime of constant wear. Estate price $1,155.00 CAD. Stock #436-00021 e10040.